Related
hey all! im new, i have already rooted my phone, and im a stock 2.2 (UCJI6) and i cant flash any roms using clockwork mod premimum, everytime it reboots and tries to install it says
E:failed to seek in /cache/update.zip (invalid argument)
E:signature verification failed
and nothing happens i just have to reboot,
thanx!
stumpzillers said:
hey all! im new, i have already rooted my phone, and im a stock 2.2 (UCJI6) and i cant flash any roms using clockwork mod premimum, everytime it reboots and tries to install it says
E:failed to seek in /cache/update.zip (invalid argument)
E:signature verification failed
and nothing happens i just have to reboot,
thanx!
Click to expand...
Click to collapse
You're in stock 2.2. You need to go back to stock 2.1 (JF6) to enable 2e recovery again then flash a rom.
Or you can just flash a kernel that enables 2e via odin. Xcal or Setiron's will both work.
thanx! i just d/l the kernel but i dont know how to flash it , its not showing up in clockword mod, its files extesion is a .tar? i tried flashing back to 2.1 with odin one click (master clear) and i stayed at 2.1
stumpzillers said:
thanx! i just d/l the kernel but i dont know how to flash it , its not showing up in clockword mod, its files extesion is a .tar? i tried flashing back to 2.1 with odin one click (master clear) and i stayed at 2.1
Click to expand...
Click to collapse
ODIN (not the one click version) uses the .tar file.
and master clear in ODIN one click does NOT flash it back to stock, it wipes everything off the internal sd card....
How can i flash back to stock? I tried flashing the e2 recovery kernel but im still getting a e: cache/update.zip (bad) error when trying to flash. So i want to try fladhing back to stock and the flashing rom
stumpzillers said:
How can i flash back to stock? I tried flashing the e2 recovery kernel but im still getting a e: cache/update.zip (bad) error when trying to flash. So i want to try fladhing back to stock and the flashing rom
Click to expand...
Click to collapse
Flash back to stock using Odin One Click found here: http://forum.xda-developers.com/showthread.php?t=731989
Hey everyone, I'm trying to play with a couple ROMS, starting with the Darky 7.7 ROM from stock Froyo 2.2 on a Galaxy S i9000.
I've done the following:
1) Rooted the phone using SuperOneClick (proven to be rooted with ROM Manager).
2) Transfered the Darkys ROM.zip to the internal SD Card
3) Downloaded and copied ClockworkMod from the original post (file is update.zip) and transferred this to my internal SD Card
4) Gone into ROM Manager, selected Flash ClockWorkMod Recovery
5) Select Install ROM from SD card
6) Selected Darkys_V7.7_Gingerbread_.....zip
7) Prompted with Backup Existing, or Wipe Data and Cache. I chose Wipe. It tells me I will be brought into recovery to continue.
8) Chose apply sdcard:update.zip
Receive the following error:
Install default apk-files, finished
--Install from sdcard...
Finding update package...
Opening update package...
Verifiying update package...
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
Where have I gone wrong? Any help is appreciated
Go to recovery mode (power off then vol up+home+power). If you're already using clockworkmod, then select install zip from sd card. If you're not using cwm yet, select install update.zip to give you cwm then choose install zip in sdcard.
Sent from my GT-I9000 using XDA App
Kops said:
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
Click to expand...
Click to collapse
You need to install a kernel that has 2e recovery, this version doesn't verify file signatures, or go back to 2.1.
I see now when I enter recovery mode at the top it says Android Recovery 3e. I'm assuming that should say Clockworkmod Recovery.
It is the next step I'm stumped with
What is an example of a kernel that runs 2e? Flashing is done through ODIN correct? Can you help me figure out how to flash in ODIN, or where I can find a 2e kernel for my i9000?
Grab the latest speed mod kernel from hardcore in the dev section, flash that via odin and it will be 2e recovery. Then follow darkys instructions and flash his rom. After his rom is on depending on where you are you might have to flash your original stock modem but only do that if your phone doesn't register on your network.
Sent from my GT-I9000 using XDA App
spectre85 said:
Grab the latest speed mod kernel from hardcore in the dev section, flash that via odin and it will be 2e recovery. Then follow darkys instructions and flash his rom. After his rom is on depending on where you are you might have to flash your original stock modem but only do that if your phone doesn't register on your network.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.
Kops said:
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.
Click to expand...
Click to collapse
open odin Put kernel into pda put phone into download mode then connect phone to pc.. The comm port will turn yellow the pres start. Does that stock kernel have 2e?
Can someone people tell me what odim in.. I'm new to this and I've rooted/installed rom on my phone but I'm planning to do more to it.. finding the best rom and stuff.
Sent from my SAMSUNG-SGH-I897 using XDA App
i897-63784 said:
Can someone people tell me what odim in.. I'm new to this and I've rooted/installed rom on my phone but I'm planning to do more to it.. finding the best rom and stuff.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
ODIN is a program that flashes individual kernels, CSC's, modems and other bits to your phone. It's one of the methods used to flash ROMs also. If you search the forums (or even Google) you should be able to get everything together. I recommend searching for ODIN, the 512 pit file, and then following the instructions below to re-root your phone.
http://forum.xda-developers.com/showpost.php?p=8238938&postcount=1
Any problems you can PM me.
Kops said:
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.
Click to expand...
Click to collapse
Check my post below, it hopefully should help, if not, you can PM me.
I got problem i can't get into CWM recovery i download update.zip and put it on sdcard but when i go recovery ( volume up, power, home ) and go ":apply update.zip" I got error...
E:failed to verify whole-file signature
E:signature verfication failed
instalation aborted
Phone is rooted without lag fix on. I am on stock 2.2 with 3e recovery.
PDA: XFJP7
PHONE: XXJPP
CSC: XXJP7
Any help to get into cwm recovery i want to put custom rom ( DOC ).
MeBeSad said:
I got problem i can't get into CWM recovery i download update.zip and put it on sdcard but when i go recovery ( volume up, power, home ) and go ":apply update.zip" I got error...
E:failed to verify whole-file signature
E:signature verfication failed
instalation aborted
Phone is rooted without lag fix on. I am on stock 2.2 with 3e recovery.
PDA: XFJP7
PHONE: XXJPP
CSC: XXJP7
Any help to get into cwm recovery i want to put custom rom ( DOC ).
Click to expand...
Click to collapse
with what did you root it? superoneclick? z4root?
you need to have recovery 2e, not 3e, becouse u can't apply update zips that are not signed. u can apply them only with recovery 2e.
just unroot, and root back again with whis
[21.12.2010][CF-Root v1.3] JPH/K/6/M/A/O/U/X/Y - su+busybox+2e, CWM compat!
download the JPO file, it will be just fine. read the instructions there on how to root. after rooting, leave the update.zip on sd card and enter recovery again. press install from update.zip and you will have CWM
cheers
|nvari said:
with what did you root it? superoneclick? z4root?
you need to have recovery 2e, not 3e, becouse u can't apply update zips that are not signed. u can apply them only with recovery 2e.
just unroot, and root back again with whis
[21.12.2010][CF-Root v1.3] JPH/K/6/M/A/O/U/X/Y - su+busybox+2e, CWM compat!
download the JPO file, it will be just fine. read the instructions there on how to root. after rooting, leave the update.zip on sd card and enter recovery again. press install from update.zip and you will have CWM
cheers
Click to expand...
Click to collapse
I did root with z4root. Are you sure i need to download JPO file? and i just need to flash it with odin?
yes, i had JP7 when i bought my phone, and i rooted with CF-Root-XX_XEU_JPO-v1.2-Busybox-1.17.1, i still have the file on the PC (now i'm on 2.2.1 JPY)
be carefull to have the corect drivers installed, cose' you will need odin.
Hello.
The phone is Samsung GalaxyS i9000.
I have installed cm10 from this thread: http://forum.xda-developers.com/showthread.php?t=1778526
and i got bootloop, so I can start os or start cmw (volume up+home+power), only download mode works fine.
I tried to reinstall CMW from this link: http://www.clockworkmod.com/rommanager , but there is "..../recovery-clockwork-2.5.1.2-galaxys.zip" and Odin does not work with "zip" files, only "tar" for recovery.
Sorry for my english.
Regards.
GZep89 said:
Hello.
The phone is Samsung GalaxyS i9000.
I have installed cm10 from this thread: http://forum.xda-developers.com/showthread.php?t=1778526
and i got bootloop, so I can start os or start cmw (volume up+home+power), only download mode works fine.
I tried to reinstall CMW from this link: http://www.clockworkmod.com/rommanager , but there is "..../recovery-clockwork-2.5.1.2-galaxys.zip" and Odin does not work with "zip" files, only "tar" for recovery.
Sorry for my english.
Regards.
Click to expand...
Click to collapse
https://www.dropbox.com/s/d382m2kyorzum16/ezbase recovery kit gb.zip
flash your phone with ezodin..all instructions given
Thank you!
pp_prathap said:
flash your phone with ezodin..all instructions given
Click to expand...
Click to collapse
Thank I LOT, it works fine now, I hope
After all, I got an error when installing Clockmod recovery:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Click to expand...
Click to collapse
So, just need to flash PDA part via Odin this file:
CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.zip (tar inside zip archive)
from this thread: http://forum.xda-developers.com/showthread.php?t=788108
finally I installed cm9.
P.S. mby someone got similar problem.
Hey
there is an easy guide..this'll flash 2.3.6 value pack
Guide: http://www.androidauthority.com/galaxy-s-gt-i9000-gingerbread-xwjw1-firmware-52955/
To root 2.3.6 go to : http://www.androidauthority.com/galaxy-s-clockworkmod-recovery-51392/
Simple using Odin...and yeah after rooting this u can flash CM9 through CWM...and remember to make the wipes...
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
shiploo35 said:
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
NO, it's Captivate
BWolf56 said:
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
Click to expand...
Click to collapse
I used my wife's cell to post. So it is Captivate SGH-I897 that is giving me problem.
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
tried and didn't work
4-2ndtwin said:
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes I've tried but odin hangs during flashing of speedmod kernel (everytime).
THANX anyway.
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
odin hangs
4-2ndtwin said:
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
thank you 4-2ndtwin,
I think the pc connection is ok bcos I can flash the GB 2.3.5 I897UCKJ1 ROM by odin 3. (infact it's the only ROM I can flash)
And Odin cannot flash the kk4 kernel, it hangs at midpoint.
SO FAR HERE GOES THE SUMMERY
I can only flash the above mentioned ROM. No other ROM, kernel, CWM recovery can't be loaded by Odin 1.85 or 3.
Same goes for flashing through recovery mode. there's always signature verification failure error (see 1st post)
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
laughingT said:
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Click to expand...
Click to collapse
I don't know, if it's bad usb driver, connector or cable how come they always give trouble during flashing everything except I897uckj1 rom?
and, I'll try redownloading the sources (have to browse the history)
nope
x0ne215 said:
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
Click to expand...
Click to collapse
there's no such option in my cwm. the cwm is 3e and very limited. it has only 4 option... reboot, update from zip, wipe factory data, wipe cache.
CWM and 3e recovery are 2 different things. CWM is a CUSTOM recovery, 3e is the stock recovery. It sounds like you're still on stock recovery.
Have you tried using ADB to push a CWM recovery.img to the device? There should be some tutorials or posts on other threads here about doing it. I had to do that for my Pantech Crossover.
Once you do that, you can flash a ROM no problem.
x0ne215 said:
... It sounds like you're still on stock recovery
Have you tried using ADB to push a CWM recovery.img to the device?....
Once you do that, you can flash a ROM no problem.
Click to expand...
Click to collapse
ok thanx, this ADB thing is sounds complicated to me. but I'll learn it.
bad news
ok... bad news.. phone is hard bricked... no download mode, no charging battery display when plugged to wall... this is going near to the end.
Time to build a jig. See the how to if you want to diy. There are a few you can buy online if you're lazy
Sent from my SGH-I897 using xda app-developers app
It's quicker and easier to just do it yourself, there's a no solder method on the forums here.
I'm trying
yes.. I'm following this 2 solderless threads jig without cutting usb cord and jig with cutting usb cord
but no luck yet, have to identify the problem. is there any suggestions about these methods or any other?
What problem? Only follow 1 of the guides, they're different, hence why there's 2.