Does anyone have any experience with car mounts for NC? Would be nice to use it as a car media center.
Check out this thread
http://forum.xda-developers.com/showthread.php?t=975419&highlight=work+progress
would the proclip car mount for the galaxy tab fit the nook? they are both 7" tablets.
I own both. The screen is the same size, but the bezel is bigger on the Nook. It's slightly taller and wider than the Tab. It's also thinner. I'm looking for a car mount that will accommodate either device.
like three topics down
http://forum.xda-developers.com/showthread.php?t=995507
easyski said:
like three topics down
http://forum.xda-developers.com/showthread.php?t=995507
Click to expand...
Click to collapse
Awesome thx. Wasn't even looking for mount.
Related
I've read the thread over on the Euro HD2 part of the site, but there's little said about car & bike mounts that fit the TMOUSA HD2's. I'm especially interested in mounts that can charge while using GPS/Sat Nav (evidently some charges don't provide enough output). Any recommendations?
koz said:
I've read the thread over on the Euro HD2 part of the site, but there's little said about car & bike mounts that fit the TMOUSA HD2's. I'm especially interested in mounts that can charge while using GPS/Sat Nav (evidently some charges don't provide enough output). Any recommendations?
Click to expand...
Click to collapse
Well it's not any use for bikes, but brodit makes the best car mounts I've ever used, and you can order them with or without a power connection built-in. The one I used with my wizard charged it even faster than a wall charger. They also will let you flip the phone from portrait to landscape (and back) as needed.
www.proclipusa.com
sirphunkee - thanks for the info on the Brodit adapters. I was looking at both the Brodit adapters and the Herbert Richter mounts (not a fan of the vent mounts) from http://www.pdahut.com/store/home.php?cat=2717 . The one nice thing I can see from their stuff is that you could have a Herbert Richter car mount and bike mount and use the same Brodit adapter for both. Anyone using any others with success?
sirphunkee said:
Well it's not any use for bikes, but brodit makes the best car mounts I've ever used, and you can order them with or without a power connection built-in. The one I used with my wizard charged it even faster than a wall charger. They also will let you flip the phone from portrait to landscape (and back) as needed.
www.proclipusa.com
Click to expand...
Click to collapse
Actually Brodit/ProClip does make a mount for bikes... Brodit Bike Mount. I don't own the bike mount myself but I can definitely vouch for their car mounts, I've used them for my last two devices and now presently for my HD2.
Nice! I just ordered my ProClip Auto Mount for the HD2 (USA). This is more money than I wanted to spend, but it looks like a great solution and I really like where it will mount to my dash.
Again, Great forums, and great site.
Two thumbs up for ProClip
I don't want to sound like an advertisement, but wow, the ProClip is a spectacular car mounting system. Good quality mount, that works very well. It was more money than I wanted to part with, but I am satisfied.
I didn't think about the fact that I will have to ditch the rubber glove the HD2 comes with. I suppose I better invest in a clear shield solution and a belt clip case like the RIMs used to come in.
smileybri said:
I didn't think about the fact that I will have to ditch the rubber glove the HD2 comes with. I suppose I better invest in a clear shield solution and a belt clip case like the RIMs used to come in.
Click to expand...
Click to collapse
If you're referring to using a clear shield while it's in the proclip car mount then it wont work. The clear shield will make it to big and not fit properly in the mount...I tried the same thing a couple devices ago.
try www.bracketron.com. They have just about everything I could think of, and decent prices. I love my universal usb charger.
Also, if you wish to get the bike mount, looks like all of the brackets, waterproof cases, etc have universal slots on the back to fit any type of mount.
Pandemoniumone said:
If you're referring to using a clear shield while it's in the proclip car mount then it wont work. The clear shield will make it to big and not fit properly in the mount...I tried the same thing a couple devices ago.
Click to expand...
Click to collapse
Good tip. Darn! Well I guess I will have to just use it bare. I really wish the HD2 had a finish like the original HTC Dash for T-Mobile. It was a slight rubbery texture that didn't slide at all. These slick finishes lead to drops and falls.
Bicycle Mount
I just bought this from Amazon and used it today. Did 15 miles and it was awesome. I use a GPS app and listen to my music via bluetooth headphones and it was nice not to have to put my phone in my pouch.
http://www.amazon.com/gp/product/B002LSHOTE/ref=oss_product
Here's an interesting and inexepnsive alternative that I just ordered. Will let you know how it is when I receive it.
The best car mount?
Anybody use this from Brodit? I am just about to buy one...
http://www.proclipusa.com/applicati...s/513086.aspx&processor=page&categoryid=17987
I have used Brodit stuff in the past and I am crazy about their products. Every now and then they have one that does not fit exactly properly, however I believe this one should work well - for the US T-Moboe version.... anybody have this?
KruseLudsMobile said:
Anybody use this from Brodit? I am just about to buy one...
http://www.proclipusa.com/applicati...s/513086.aspx&processor=page&categoryid=17987
I have used Brodit stuff in the past and I am crazy about their products. Every now and then they have one that does not fit exactly properly, however I believe this one should work well - for the US T-Moboe version.... anybody have this?
Click to expand...
Click to collapse
On the first page of this thread there are many posts of users (including myself) who've made this purchase and love it. You can't go wrong with this mount, the best I've used to date.
is there a way i can use the pro clip and still maintain use of the micro usb slot? I have a carputer and i tether the hd2 to my PC, so I would need to be able to access the micro USB port to connect a usb cable to the pc
jmejia15 said:
is there a way i can use the pro clip and still maintain use of the micro usb slot? I have a carputer and i tether the hd2 to my PC, so I would need to be able to access the micro USB port to connect a usb cable to the pc
Click to expand...
Click to collapse
Yes, the usb slot is always accessable with pro clip mounts. The need to be able to charge the device while in the mount is crucial.
Actually, the proclips are available with and without a built-in charger...so if you want to keep the port free, just be sure to order the one that doesn't have the charger cord/plug attached.
let me record out of the windshield... ie. let me record what i see when I drive...
I know, it's kind of a weird request, but is there one that will let me do this?
I highly doubt it, there is finally a company just now making a dock for the inc...but still not released yet. youre better off modifying an existing car mount to get that option or make something....can't be too difficult
Sent from my ADR6300 using XDA App
if i remember correctly.. the holster on the htc car dock has the camera cutout so you should be able to use it. the holster mounts to the dock and lets you rotate it to landscape so that should let you see out
I have a mount like this from VZ.. It captures the mount in the scene, but could probably be modded.
Best Buy sells an adjustable universal window mount setup that works perfect. You can virtually adjust it any way to make it fit, and would work great for your application. Plus, the side grips have a nice foam type material that would soak up a lot of vibrations.
luvit said:
I have a mount like this from VZ.. It captures the mount in the scene, but could probably be modded.
Click to expand...
Click to collapse
You could use a drill bit slightly larger than the camera whole. I actually have that verizon clip, and I think a mod would work quite well.
Sent from my ADR6300 using XDA App
No no, it captures the suction cup in the view.. Not the phone cradle.
Check out the M25 Sound dock on amazon. I have one, the angle is adjustable, and it steers out the window.
UnRevoked HTC Incredible
You could always get one of those non-sliding, weighted suction cup mounts that go on your dash then use any mount and place it facing the windshield.
You could always try to eBay a cheap universal mount and cheap DInc case, then super glue them together for a cheap custom fit case
There's a car mount on eBay called the SlipGrip that has a ton of different mounting solutions and custom molded cradles for the DINC in various kinds of 3rd party cases (Otterbox, silicone, VZW case, naked). The suction cup mount has a nice long adjustable arm so you could mount it with the suction cup on your dash rather than the windshield and adjust the cradle so the arm isn't in the shot. The cradle also rotates 180 degrees so you can record vertical or horizontal.
I will sell you one for $50 that is really nice. The cradle is made for the phone and you can suction mount it to your window or glass nightstand table. I will post pics in the morning.
This might not be the right place, but I can't find an answer - is there a car dock that will fit the Seidio 3500 battery? I don't know if the large battery causes any problems with car docks, but I would assume it does...
i use one thats actually for a I*hone. It clips and leaves the camera unobstructed.
I was wondering if i made a custom mount for my tab that uses 4 neodymium magnets if it would mess up any of the internals of the device? Please don't recommend me a window mount. If you know of any low profile mounts (1/2" - 1/4" thick) tell me which one that is.
@padholdr on twitter has some expensive mounts but they look pretty legit, sturdy, and designed really well for most cars. good luck.
Thank you for the response. Does anyone else have an answer. Those mounts are nice, just not what I'm looking for.
Just wanted to share this and didn't see it anywhere else. I had an old HTC Thunderbolt Car mount from iGrip using the PerfektFit system. I took off the phone portion and took a gamble on the suction mount piece being compatible with a cheap N7 car dock bought off of eBay (the mount holes looked the same, but the item description did not explicitly say PerfektFit compatibility). The two items paired nicely and has been very stable for me. It is also small and slim and did not require me to do any major changes to the car. The N7 mount only cost me $14 (search for "Dashboard Non Slip 360 degrees Stand Holder Car Mount for Google Nexus 7") and obviously, I already had the iGrip mount. You can get cheap iGrip mounts off of Amazon. Just search for "iPhone 4 iGrip" and you should find some for as cheap as $7 since the old models are being cleared out. So in total, this should cost about $20.
I was not sure if I could put links directly on this post. If I can, then I will update with direct links to what I used.
I've also attached some pics. I had it on the windshield at first but it was a bit to high for me, so I remounted it on the Dash instead. Worked perfectly for my needs.
Nice one, wanax, and welcome to the forum.
very cool. It looks like it will work well.
i will try that.
I'm looking to use my Nexus 7 in my car for GPS, music, etc. I'd use bluetooth for audio and I ran a long USB cable from my center console's USB port. I just need a reasonably priced dock that mounts in the CD slot that I can stick my N7 in. If it helps I have a 2013 Honda Civic Si.
Anyone?
I've seen several posts where people have permanently mounted theirs in their cars..usually with a lot of customized mounts.
drwx said:
I've seen several posts where people have permanently mounted theirs in their cars..usually with a lot of customized mounts.
Click to expand...
Click to collapse
Yeah so have I and none of them said how they did it or where they got them from. I really only need something to go in the CD slot. It's usually just a little piece of plastic that fits in just far enough. Just looking for a recommendation of what people have used or know is good.
Anyone??
Brodit, definitely!
VW Polo 5 (6R), 2012, Brodit Proclip and Nexus 7 Passive Mount (all together ~40€).
Can share the parts later with you.
Check the picture.
Greets, DN41
Sent from my Nexus 7 using xda app-developers app
Is this any good?
http://www.amazon.com/ExoMount-Tabl...id=1384464713&sr=8-2&keywords=cd+slot+nexus+7
I want to do the exact same thing.
I have a car charger with two usb outs, a nexus 7, and an HD2 (yes, i still have it, use it, and its awesome!)
I connect both of them to the charger with usb, connect HD2 to my car audio system and my nexus 7 (BT).
My musics (and my calls!!) are on my hd2, so they play on car audio system.
my navigation apps are on my tablet.
and also i use tablet talk to connect my phone and tablet to each other, and have my sms and calls on nexus.
i used a few mounts but... im really looking forward to use ExoMount Tablet S...
(the only problem is that i cant watch videos or listen to musics on my tablet... trying to fix that with using AUX cable from tab to car audio system)
I kind of have a temp solution. I can actually lean the thing against the screen that has the backup camera, radio station, etc in the dashboard and there's a little lip that holds it in just the right position so it can't slide or tip over.
The problem with the whole "stick it in the CD slot" idea is that the mount then obscures your stereo controls.
nunjabusiness said:
The problem with the whole "stick it in the CD slot" idea is that the mount then obscures your stereo controls.
Click to expand...
Click to collapse
What do you recommend then?
I got this: http://www.amazon.com/gp/product/B0072LATRY/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1
and it works nicely.
In my Mustang, it attaches to the dash and hangs down between the AC vents. Different cars of course have different layouts, but it is very configurable.
nunjabusiness said:
I got this: http://www.amazon.com/gp/product/B0072LATRY/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1
and it works nicely.
In my Mustang, it attaches to the dash and hangs down between the AC vents. Different cars of course have different layouts, but it is very configurable.
Click to expand...
Click to collapse
3 out of 5 stars though, I dunno...
agentfazexx said:
3 out of 5 stars though, I dunno...
Click to expand...
Click to collapse
For years I would buy a new mount every time I got a new device. Finally I just decided to switch over to the Ram Mount system. They have thousands of different mounts and holders, and make it easy to swap stuff around and find something that works for my new device. They are more expensive than the cheap stuff you get off Ebay, but they last. I have the ball mounts in my car, van, trucks, etc. and they are great.
http://www.rammount.com/
How's this look?
http://www.amazon.com/Vehicle-KTech...129708&sr=8-2&keywords=car+vent+nexus+7+mount
agentfazexx said:
I kind of have a temp solution. I can actually lean the thing against the screen that has the backup camera, radio station, etc in the dashboard and there's a little lip that holds it in just the right position so it can't slide or tip over.
Click to expand...
Click to collapse
I have Honda civic as well. How do you charge the tablet if you're putting it there?
Sent from my Nexus 5 using Tapatalk 2
frigidazzi said:
I have Honda civic as well. How do you charge the tablet if you're putting it there?
Sent from my Nexus 5 using Tapatalk 2
Click to expand...
Click to collapse
USB cable coming from the USB port in the console.
Just make a custom mount to your likings if you are having this much trouble finding a solution.
Buy the dock and a cheap snap in case for the N7.
Use carbon fiber to mold your custom mount.
Snap N7 into new mount made out of dock and cheap case.
thats a simple run down but just to give you an idea. benefit of this is you make it the way youd like to suit your needs at the location of your choice in your car.
Civic si, goly that car is rubbishy cheap toy. That car have tons of third market addons for any hardwares to portable addons.
The way you replies, sounds as if you are in mid 20s with a civic si. You should know the Asian civic group in downtown Maryland and the nearby China Town for advices and cheap hook up deals!
I seen civic mods each headrest with nexus 7 mounts for gaming and movies.
Try a Mobio magnet http://www.hellomobio.com its strong and allows you to remove the tablet easily.