Hi all
I don't know, I'm right here, but I think, I have a hardware or software problem.
I bought a 2nd hand HTC TD2 mobile phone and it's good in all things, but it's basicly job is to call other people. I can call other people, but only with headset or free speaking and not via phone at it self. Is this a hardware problem or can I repair it with a new WM image or a software reset?
As second: Can I install the new Windows Phone 7 or only WM6.5?
To eliminate the posibility of a software issue, do a hard reset.
If it still doesn't work, I have heard of people having earpiece issues that were resolved by tapping on it several times.
I do not believe WM7 will be ported to this device and the hardware requirements are inadequate to handle the OS.
Related
I bought a Kaiser a few months ago, and I've been pretty disappointed to be honest.
I sold my old Mio A701 (WM5) which never gave me any problems... big mistake.
I have a few issues with the Kaiser, two of them are very frustrating.
1. During a call, the microphone volume drops completely so the caller cannot hear me... although I can hear them perfectly. Done numerous microphone tests with voice recorders etc and it only does it during a call. It's not a signal problem either, as I get a full signal in the office. HTC tell me they've come across this issue before, but they can't remember how to fix it. This is a £330 device, touted to be one of the best on the market... if this isn't resolved soon, the whole thing will end up on the front carpark in pieces.
2. Pairing with Parrot 3100 (running 4.16d) is completely unusable. I have complained to HTC & Parrot several times but I'm simply told to wait as they're doing everything they can to resolve the issue. Parrot are quick to tell you "we have a great relationship with HTC so it shouldn't be much longer" but it's been months!!! I'm not sure if it's a problem with the phone or the headset, but it's still not good enough.
Ghost calls (Parrot says "Call....." and takes control of the stereo (it's a Saab 9-3SS with ISO) but the phone isn't dialing anyone. I can only regain control of the stereo by stopping and removing the key... leaving the Parrot to ask "do you want to transfer the call to handset?" WHAT CALL?
Incoming/Outgoing calls sometimes aren't diverted through the Parrot.
3. WM6 seems considerably slower than WM5 for many common tasks. Is there any way to downgrade to WM5?
I've upgraded the firmware several times (now using Schaps) and it seems to be a bit quicker than before but it still suffers from the frustrating mic problem.
Any help would be much appreciated.
For me, the Kaiser is worth the money - I've been like a dog with 2 dicks since getting mine and apart from a few simple problems setting up TomTom I'm more than satisfied.
I was the same with my Wizards (Qtek and HTC) and Hermes (Vodafone). Maybe I'm more tolerant about problems, or more lucky not to get the rogue phones with hardware problems (software stuff can always be resolved) - but my experience of the HTC phones is that they're worth the £300+ upgrade every year.
That said, I haven't had my Kaiser too long yet so I may change my opinion.
I spent months and months researching my new purchase & I can tell you with 100% confidence that YES, IMO the Kaiser is worth the cost.
I chose to go with the HTC TyTN II over the Tilt because I just didn't want to deal with all the stuff AT&T did.
I knew about the driver issues, blue tooth issues etc etc etc and I am still convinced this is the best device for my needs.
It will only get better with time, and thanks to the tech geniuses that lead us in our quest here at XDA, I know many more great things are coming (and this is one of the reasons I donate to the community and support the driver Bounty ).
Nothing in this world is perfect & with that being said I have found that almost every issue has a good workaround. Sometimes that might mean using different hardware or software than we are accustomed to.
IMHO, even with the issues we face this is the best device out there and has so many possibilities for customization.
I love mine and have enjoyed learning about it and what I can do to improve the quality and efficiency of my life, even though i do get impatient
İ have HTC TYTN II. when i start to talking with phone, the person who iam talking with, says; ur voice is decreasing.. and in a while my voice is not going the other person.. cause of this i have to close the phone and call that person again..
what should i have to do?? to stable the microphone volume.. all volume bars are at the top.. is there any other fonction about microphone??
my rom: Schap's WM6 Pro 4.22 ROMs
my radio: 1.27.12.11
Have you looked at your microphone AGC setting? It might be dynamically changing during a call. Try disabling AGC via: Settings-> System -> Microphone AGC.
it was disabled, and i changed it to enabled..
(i tried this before, but it didnt change anything)
any other opinions??
I has the same problem with the voice volume in a call.
any solutions??
I've just come off the phone with HTC, Handtec & Hugh Symons (Handtec's supplier) complaining of this exact same problem.
My TyTn 2 has suffered from this problem since the day of purchase (04/09/07) and nobody seems to know what's wrong. Handtec have refused to replace the phone (despite contacting them 4 days after purchase) and HTC are unable to replace it as they do not sell any phones... they rely on distribution gateways like Hugh Symons.
I'm very, VERY disappointed and feel I've completely wasted £440 on a "phone" (I use that term loosely) which simply cannot be used.
Having found another thread on XDA forums a few weeks ago, I relayed this info to HTC to be told
"trouble is with XDA forums and other similar sites, you tend to get several replies from users who think they have the same problem, but it's actually something entirely different"
That may be true, but I doubt that's the case on this occasion.
I wish I'd stuck with my Mio A701! Their support was awful, but at least the phone worked.
Oops...
I'm also running Schaps firmware, but I've suffered from this from day one... running HTC's firmware.
The only difference (as far as I can see) is that the Schaps firmware makes it go like a rocket. Very stable (though it didn't crash before tbh) but it's the speed which really impresses.
so what should we doo.. i can do everything with this machine, but cant use it as phone lol.. its funyy..
so we should send lots of mails to htc service.. maybe we can take their attention..
Hi all,
First of all, let me wish you all a happy 2009
Since a few days my HTC Tytn II freezes sometimes: During several seconds I can't select items using the Stylus.. Even if i tap several times, nothing happens. It usually freezes for 2-3 seconds, not more.
I'm using the 6.1 ROM. I already tried a hard reset, and even without any additional programs installed, the problem occurs every now and then.
Anyone has an idea?
-moose
I've had this happen to me as well, but thought it normal just because of the OS being Windows. Sorry I don't really have an answer I'm learning all this stuff as well but did want to at least acknowledge your not the only one with this as an issue.
ok, but is it exactly what I'm experiencing? It's not always the case, only sometimes.. And I can't tell beforehand when it's going to happen actually.
I don't have lots of programs open when the problem occurs..
Par for the course with HTCs WM 6.1 'upgrade'
I had that problem with the HTC supplied WM 6.1 upgrade ROM (along with general unreliability and poor GPS performance). Reverting back to the WM 6.0 ROM/Radio/SPL seems to have cured those issues. Now the only problem I have is an occasionally laggy keyboard (or if I install the laggy keyboard fix here on xda-dev, then occasional pausing during media such as video and mp3 playback - haven't figured out how to solve both). I suspect your pausing is associated with radio/reception activity. Try turning it to flight mode as a test and see if it still occurs (not that the device is much use like this, but it will pinpoint the cause).
HI,
Thanks for reply. Do you know if there's an official (supported by HTC) way to revert back to the old windows?
I indeed upgraded recently to 6.1, and it seems that problems started after the upgrade.
You could complain and get HTC to do it
moose_man2008 said:
HI,
Thanks for reply. Do you know if there's an official (supported by HTC) way to revert back to the old windows?
I indeed upgraded recently to 6.1, and it seems that problems started after the upgrade.
Click to expand...
Click to collapse
If your phone is still under warranty then just speak with the HTC Repair Centre for your area (in the UK they're in Milton Keynes). In my case because the GPS under WM 6.1 wouldn't work properly (and I was having the other problems you described), when I told them I needed a prompt solution they offered to revert it for free. After booking it in through their call centre, I left it with the repair centre in the morning and it was done at the end of that day. No there is no official way to do it yourself (even though one HTC call centre staffmember tried to tell me there was - the RUU package he referred me to was only for upgrading from even older WM 6.0 ROMs or reflashing over the same WM 6.0 setup, not reverting back from WM 6.1). There are unofficial ways as per instructions in the wiki so if you're not near to one of their repair centres (or object to the delay/costs involved with postage), then thats an option but make sure you know what you're doing first.
Assuming you have a European WWE HTC branded TyTN II, the setup in my sig seems to be working pretty well here in the UK.
The cure for this is to use the kaiser unlocker and unlock your phone. You will probably have to re-flash your radio after that but this fixed it for me. I only experienced after upgrading to 6.1.
punkhawaiian said:
The cure for this is to use the kaiser unlocker and unlock your phone. You will probably have to re-flash your radio after that but this fixed it for me. I only experienced after upgrading to 6.1.
Click to expand...
Click to collapse
I don't think thats an issue associated with any lock on the phone (although perhaps a lock may make it worse). My HTC branded TyTN II came totally unlocked to start with and after the WM 6.1 upgrade the problems came, after reverting to WM 6.0, they went - the solution seems simple to me if people can get past the 'against the grain thinking' of using an 'old' ROM for greater reliability.
Flying Kiwi said:
I don't think thats an issue associated with any lock on the phone (although perhaps a lock may make it worse). My HTC branded TyTN II came totally unlocked to start with and after the WM 6.1 upgrade the problems came, after reverting to WM 6.0, they went - the solution seems simple to me if people can get past the 'against the grain thinking' of using an 'old' ROM for greater reliability.
Click to expand...
Click to collapse
I will confirm that this is happening on a HTC Branded unlocked TyTN II. I have had no experience with 6.0 on my TyTN II, as my phone came with 6.1 installed and exhibits the above mentioned behavior.
dear all...
i deceided a few weeks ago to change from nokia to the htc touch diamond. a friend of mine has an htc touch hd and i really liked it. the touch display was my favorit. i don't like apple products, so the iphone was never an option, also i don't like samsung products (mobile ones) because i had a samsung mobile and had a lot of troubles with it.
well... since i have the touch diamond, i also have troubles with it. in the first three days i wasn't able to phone -> the phone hangs up and if i tried to dial a number no one can hear me and i didn't hear the one i called. i gave it back to the shop for repair -> after two weeks i got it back and was told there was an software problem and it is now fixed. ok... well it was fixed, but new problems were upcoming. first of all the battery -> it's not possible to pass a day from morning to the late evening with charging the diamond only once... first i thought this is my biggest problem but then i revealed that an other bigger problem exists which actually effects my job. i'm not reachable because my mobile losts connectivity as soon as it goes to standby. when i activate it over the power button it searches for an gsm signal but it doesn't find one. it doesn't matter if i'm in my flat or if i stand with the mobile near to the radio mast. it only helps if i turn the phone function off and on.
my friend told me about the opportunity that this forum exists where people working on developing roms and other nice features for various mobiles and i should take a look at it. well.... i registered here, read the howtos and guides and flashing bibles and tried nearly all available roms here to improve the behaviours of my diamond, but i don't succeed, well this is the time, where i capitulate and ask for help... my provider can't help me... they said that the mobile is not so often sold and they don't hear anything about customer complaints...
info about my acutal-configuration:
mobile: htc touch diamond
spl: 1.9.30-OliNex HSPL
rom: 2.07.Gen.Y GER
radio: 1.09.25.23 (htc because mobile is still security locked)
protocoll version: 52.51.25.26H
provider: A1 mobilkom www.a1.net
location: EU/AT/VIENNA
can anyone give me suggestions what to do?
can anyone help me to make my diamond a mobilephone it should be or give me an advice what i can do?
i also think about resetting the phone to factory defaults (at the moment i'm searching for a guide) and give the handy back and pay the upgrade price for the touch hd... my friend doesn't have any problem with it and i don't know any other way out of this situation... at the moment i have a multimedia device with wich i can't phone and couldn't be reached which in my opinion is absolutly not acceptable.
kind regards
unlock it and use bsb rom
losing GSM signal when the phone is on standby? I'm just making a guess here, but I believe you might have a problem with the ROM and or just only the radio. unlock it and flash a new ROM and or a radio to see if it works
as for battery life, the Diamond battery is very bad, and the radio you use is directly related to the battery life, some radio sucks battery out dry pretty quickly, but normally, this phone requires a charge once per day
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Can anyone recommend to me a custom ROM for the X1 that has had improvements to the Bluetooth implementation?
jhbodle said:
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Can anyone recommend to me a custom ROM for the X1 that has had improvements to the Bluetooth implementation?
Click to expand...
Click to collapse
Never heard any cook do BT differently exept base on differenr WM built. I do patch the driver w/ HD one such that Cyberon VC over BT works. I never had bt cutting out during call but sometime AFTER the call (and it's a well known issue to all HTC device)
Perhaps it is worth to try other radio (you don't have to change rom, just update radio). I'm really not sure, but radio probably contains Bluetooth drivers too. Is that right?
netbat said:
Perhaps it is worth to try other radio (you don't have to change rom, just update radio). I'm really not sure, but radio probably contains Bluetooth drivers too. Is that right?
Click to expand...
Click to collapse
When flashing generic ROM you flash a corresponding radio (R3A with 1.14, R2A with 1.11 or 1.10). So this is probably no solution, but always worth a shot.
Diferent RADIOs are NOT the solution (I tried more than five radios).
I have tried more than 30 diferent ROMs in spanish and english, with WM6.1 and WM6.5, and no one go right with the Bluetooth.
I call Sony Ericson and they said that is normal because to save energy. It´s my first phones that disconect the bluetooth.
I've had all kinds of BT problems.
It usually turns of by itself, even in the middle of a call. (not so fun in the car, driving)
An I've also tried different ROM's and radios, no better.
BT is not very good on X1 I'm afraid... : (
mattiL said:
I've had all kinds of BT problems.
It usually turns of by itself, even in the middle of a call. (not so fun in the car, driving)
An I've also tried different ROM's and radios, no better.
BT is not very good on X1 I'm afraid... : (
Click to expand...
Click to collapse
Would you say that this problem affects all Windows Mobile devices? For example, if I get an HTC Touch Pro 2 am I going to have the same issues?
I have no idea really, I only have the Xperia.
Any htc owners here ?
jhbodle said:
Would you say that this problem affects all Windows Mobile devices? For example, if I get an HTC Touch Pro 2 am I going to have the same issues?
Click to expand...
Click to collapse
jhbodle said:
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Click to expand...
Click to collapse
A friend and me, we both have the same problem as described by jhbodle since approx 6 months back.
During almost every call the sound is transferred back to the phone (as if I would have shut down the headset).
The weird thing is that bluetooth is still on and the headset is still treated as if it would be connected, meaning that I can still end the call by pressing the call button on the headset.
I can get the sound back to the headset (during the conversation) in two ways:
By choosing "Turn hands-free off" and then "Turn hands-free on" from the phone, or by shutting down the headset and then starting it again.
We have narrowed it down to that this happens whenever the phone disconnects from dataconnection (which seems to happen from time to time when using Activesync with Push - it disconnects and then directly reconnects). It does not matter if the phone is in 3G or GSM mode.
Have any of you noticed any similar problems during calls?
We are using the Swedish Telenor network. It might be possible that they have changed something that triggers the dataconnection to reset, and you on other networks are not beeing disconnected and therefore have not noticed this issue?
Maybe most of you are not using your dataconnections that heavely?
Those who are - could you test to disconnect the dataconnection while in call with TB headset..?
My friend have kept his phone with stock ROMs - he have had this problem with 3 or more different headsets.
I am flashoholic and have tried every ROM release from the top five cookers since the Hard SPL release for the Xperia. I have had the phone replaced once for a month ago - I have had this problem with both phones.
Hope you can help me to narrow this problem down even more, and most of all, I would like to know if we are alone with this problem..?
I have searched the forum for similar problems, but only found this one, so I did not want to create a new thread even if I it should be in the "General" category...
Oops... apparently I did not search enough - i have now found some other threads discussing this issue, but without any solutions.
I know that the most common BT issue for everybody is the BT deactivating itself after a call (I have had this from time to time aswell -especially after I have installed the MSVC software).
I don't want to start cross linking and dubbel posting, so I will wait and see if anybody has something to add to my previous post over here...
Would be nice to know if others, having this issue, can also link this to the dataconnection disconnecting.
How long are you talking on the phone for? I don't talk on mine for more than a few minutes, but occasionally I do get the 30+ minute calls that I have to deal with and I've never had blue tooth just shut off for no apparent reason.
For both me and a friend of mine, this happens during most calls regardless of the call duration (my calls usually take between 30sec and 10 minutes).
Sometimes, when I know that the conversation will take time, I reroute the sound back to the headset, but the same thing can happen again during the same call.
As I said, for me this happens whenever dataconnection disconnects on the phone.
Are you using dataconnection alot? Could you please try to disconnect the dataconnection during a call?
thanks