Hey all,
I'm going between roms now and decided to try Darky 9.3; i flashed back to stock using Odin and then installed hardcore using Odin. My phone has been sitting at the galaxy s screen for 10min now. any suggestions? I know when i installed Cognition it normally took alittle while to convert the file system.
Thanks
You installed a 2.2.1 kernel over stock? Or did you flash a rom with hardcores kernel? If you were in stock I think that is your problem
Odin back to stock. Start over. Flash froyo rom with lag fix enabled by default. Then darkeys
Sent from my Captivate using XDA Premium App
sorry should have been more specific, i flashed back to 2.1, and tried to follow the steps to install speedmod at darky's website
Pull battery, 3button into download mode. Re-Odin to stock. Boot up the stock ROM to make sure it is working.
Install clockwork recovery. Then, flash a 2.2 ROM, and boot it up. After it boots up, you can go back into recovery and flash Hardcore's Speedmod Kernel. As mcord said, you can't flash a Froyo kernel on an Eclair ROM.
I use speedmod with darkyys as well. It works great. I just followed the steps on the darkyy thread here at xda. I always backup and go back to stock no matter what. i just want to be safe. Then i odin to Darkyy 9.2 and proceed to flash via the clockwork recovery installed with 9.2 the new kernal(speedmod) and modem(JK4). Then use the darkyy configurator to install the 9.3. I think because you tried to install the speedmod kernal on top of the 2.1 base it doesn't work that is why you are getting stuck. Here is the link to Darkyy's thread. http://forum.xda-developers.com/showthread.php?t=942046
I think you neglected. To click off autoboot. If you flashed the kernel then entered recovery without letting it boot you would of been fine
Sent from my Captivate using XDA Premium App
Paragon RC6 and 1400 kernel w/ voltage control app
Noob here:
I can run the default 1200 and 1300 kernel no problem. I overclock and undervolt without issue. However, when I flash 1344 and 1400 kernels, the VCA force closes every time. Any thoughts out there?
Related
Hi All,
Reason for this question is that, first of all I wanted to root my newly bought SGS GT-I9000 (2.2 DDJP6) So, flashed speedmod kernel K13E (latest). Later, when I wanted to install MIUI rom, as per the instruction one need to flash K13C kernel.
But, whenever I try to flash SM - K13C kernel on top of K13E, I tend to soft-brick my phone (BSOD). I need to once again flash K13E to get back my SGS to work.
So, in order for me to get on to MIUI rom, I have two options...
1) Downgrade K13E to K13C kernel. And continue to flash MIUI rom.
2) Restore my kernel to stock kernel first. Then start flashing K13C and continue to flash MIUI rom.
Can somebody please suggest, which option would be best and highly feasible?
Thanks in advance for the responses
Prabhu.
i dont think it matters what version of speedmod you are on, its only so you have CWM to flash the cyanogen kernel.
but anyway if you want to downgrade just download the one you need k13c and flash it thru CWM or ODIN and it will overwrite your previous kernel
I did try to flash K13C on top of K13E. Odin just froze at <ID:0/022> zImage step.
Please find the snapshot attached.
how long has it been like that. ?? try to find a CWM version and see if that works.
or just flash miui with your current kernel
If u want to get on miui, follow the guide on theandroidsoul.com/net.....good to have a clean start with ezbase2.0
Sent from my GT-I9000 using XDA App
I tried the CMW version of speedmod k13c and was successful. But, while flashing the cm7-galaxys-initial-kernel.tar from odin again, I got stuck in the below attached odin screen.
Is there any CWM version for the cm7-galaxys-initial-kernel.tar? What is that I am doing different?
So i've installed a 2.3.3 rom and now i cant get to CWM recovery..
so if got this right, while on a 2.3 kernel/rom i can't see nor boot into CWM recovery even though it IS installed..
by flashing to a 2.2 kernel Using "SGS Kernel" will i be able to access it again?
or can i downgrade to 2.2 by simply flashing a 2.2 rom from Rom Manager?
Sorry for being a noob..
What 2.3.3 rom have you flashed?
Sent from my GT-I9000 using XDA App
i flashed Darky's Extreme Edition v10.1
If you want to go back to a standard firmware, you could just go to samfirmware.com and flash a firmware using odin with pit file and repartition. You could just flash jvo rather than going back to 2.2.
That would restore recovery mode back to your phone
You will need to disable voodoo lagfix first though. You can do that with voodoo toggle app on market.
Edit: Flashing a kernal like fugu will give you cwm. Just flash jvo from samfirmware first
cant i just flash a 2.2 rom from the Rom Manager app?
edit:just noticed your edit, will any 2.2 kernel work or just the ones with CWM?
For rom manager to work you will need a compatable kernal first. If you cant access cwm I would guess you have the wrong kernal or it didnt flash correctly.
If you have a 2.2.3 rom I would not recommend flashing a kernal for a 2.2 rom.
If you want cwm then you will need a kernal thats includes cwm. I personally recommend fugumod kernal.
Sent from my GT-I9000 using XDA App
Hey guys, stuck in a bootloop after attempting to flash Fugumod on CM7.1 stable on my Samsung i9000 rom as per the title!
Any ideas?
Thanks for the help in advance
had the same problem. Just flash back to stock using Odin as long as you can get into Download Mode. Can you?
Yup can get into download and clockwork no prob. Back to the stock cm7.1 kernel? Where would i find the .tar for that? Or any other .tar that would let me boot and backup everything?
Cheers!
having the same problem...
I've tried Glitch, Platypus and neither of them can pass the boot screen.
But Fugu works in a mod rom based on CM7.1.
Would anybody help us?
I flashed Glitch and booted no prob. Seems a tad unstable though and would prefer to flash back to the stock cm7.1 kernel. Anyone know where to find just the kernel?
CapricornOne said:
I flashed Glitch and booted no prob. Seems a tad unstable though and would prefer to flash back to the stock cm7.1 kernel. Anyone know where to find just the kernel?
Click to expand...
Click to collapse
Flash the CM7.1 rom again without any WIPE.
If you do wanna backup the stock kernel, after doing what I mentioned above, try SGS Kernel Flasher to extract the kernel.
Hey all, just revived my old captivate, was going to put ICS on it, was attempting to root, but the one click root program wasn't working, was hanging while rooting.
I tried factory wipe, and now I get stuck in a boot loop, it will boot the i896 bootscreen, the the Rogers screen, then reboot.
I've tried from there connecting to Kies, but it won't recognize it. I tried flashing stock Eclair to it using Odin, still bootloops, tried one click odin, still boot loops.
Any thoughts? Am I missing some obvious noob step? I don't have CWM or anything on it, just a stock 2.1 that won't boot.
Just tried flashing the AT&T firmware, same deal. Get past the ATT bootscreen, then the Galaxy S screen then it reboots.
Flashed Froyo, and it boots! But I can't root If I flash back to 2.1, back to bootloop.
Try to search around the forum for the stock recovery without signature checks. Once you have that, you can flash a rom. And most custom roms comes pre-rooted. You can also flash a kernel with Clockworkmod recovery built in, and flash the rom via CWM. Just read the Rom thread about installing.
Sent from my Serendipity VII flashed Captivate using xda premium
Limitz Cash said:
Try to search around the forum for the stock recovery without signature checks. Once you have that, you can flash a rom. And most custom roms comes pre-rooted. You can also flash a kernel with Clockworkmod recovery built in, and flash the rom via CWM. Just read the Rom thread about installing.
Sent from my Serendipity VII flashed Captivate using xda premium
Click to expand...
Click to collapse
Thanks, looking for that now, any idea where it might be to narrow my search? Hopefully this helps.
I think it should be in android development forum, in this captivate section. If your on a computer, you can search for it using the search box at the top.
Sent from my Serendipity VII flashed Captivate using xda premium
If you're on Froyo, look for the speedmod kernel. If you can flash that via Odin/Heimdall, you should have root and CWM on your Froyo build.
The other option would be to flash a stock Gingerbread rom with CWM baked in - I believe that 4-2ndtwin has a KK4-based one-click with CWM and Gingerbread bootloaders in the Stock Roms Collection thread.
jmtheiss said:
If you're on Froyo, look for the speedmod kernel. If you can flash that via Odin/Heimdall, you should have root and CWM on your Froyo build.
The other option would be to flash a stock Gingerbread rom with CWM baked in - I believe that 4-2ndtwin has a KK4-based one-click with CWM and Gingerbread bootloaders in the Stock Roms Collection thread.
Click to expand...
Click to collapse
Flashed the Kernel through Odin, but on reboot there was no sound and the touchscreen didn't work. Managed to get into CWM, so I'll see how things go.
The kernel worked, got to CWM and flashed CM9, thanks for the help!
Hi there, I rooted my GT-I9000M on KG3 FW using this FW http://forum.xda-developers.com/showpost.php?p=23560333&postcount=498 , downloaded Superuser and busybox, downloaded ROM Manager, flashed CWM, but when I'm trying to install custom roms, it boots up on Android System Recovery 3e instead of CWM Recovery. Did I missed something or I need to do something else to make it work ?
I've got the exact same problem.
Flashed stock kg3 pda,phone,csc
Flashed rooted kg3 (pda only in odin)
Installed superuser and busybox which seem to work correctly
installed rom manager and download cmw recovery.
Tried rebooting in cmw recovery and it does not work...
I don't think the cwm is the same...I believe that is just the simplest root directory possible, nothing more. Try flashing jvt or jw5 in pda and root that after with appropriate root kernel. Then you will have no issues. Besides there are no custom roms for kg3 anyway.
Sent from my GT-I9000 using xda premium
This is a good guide by All Gamer. http://forum.xda-developers.com/showthread.php?t=1379650
I already saw that guide, but the JVP ROM is not available anymore. I googled it and I can't find it !
Guys just flash jw5 under pda and use the kg3 modem and csc. Then flash semaphore 2.7.4. tar. Problem solved. I have a bell Canada phone myself and this setup works great. Then you can flash ics or whatever in cwm. If you don't like ics, I recommend Dmore3.3 for jw5.
Sent from my GT-I9000 using xda premium
Is there any rooted kernel out there which I could use with stock kg3 rom and modem without losing anything at all?
So I could use cmw recovery for a nandroid backup of my phone?
thanks
I just did what vanisleryan said, but I still got the Android System Recovery 3e not the CWM Recovery. I'm totally lost now ...
Pascal_82 said:
I just did what vanisleryan said, but I still got the Android System Recovery 3e not the CWM Recovery. I'm totally lost now ...
Click to expand...
Click to collapse
Bud I'm running a custom rom installed through cwm and the instructions I gave are what I'm running right now. If you're rooted with the semaphore 2.7.4 kernel than you have cwm. Not sure what you did wrong? Go and install the cwm apk I think it's available in the chainfire thread.
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
OK, I figured how to get to CWM. When I'm trying to install the MIUI ROM, I got bootloops. Did I do something wrong or it's just an imcompatible ROM ?
Pascal_82 said:
OK, I figured how to get to CWM. When I'm trying to install the MIUI ROM, I got bootloops. Did I do something wrong or it's just an imcompatible ROM ?
Click to expand...
Click to collapse
Not sure but I think you might just need to pull the battery when it boot loops and go back into cwm with 3 button combo, install again and should complete install. It probably tells you installation instructions on thread. Man if you don't end up like miui then try Dmore3.3... It's rock solid and resembles ics but runs on gb.
Gl
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
I successfully installed MIUI and I love it. The only thing annoying is that it's showing numbers instead of my carrier name.
Maybe you need to install a different modem, where in the world do you live?
http://forum.xda-developers.com/showthread.php?p=15443678
These are flashed in cwm.
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
I flashed the original UGKG3 and the "problem" still there.
vanisleryan said:
Bud I'm running a custom rom installed through cwm and the instructions I gave are what I'm running right now. If you're rooted with the semaphore 2.7.4 kernel than you have cwm. Not sure what you did wrong? Go and install the cwm apk I think it's available in the chainfire thread.
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Click to expand...
Click to collapse
i was stuck for a bit until i came across your post
:laugh:thanks a bundle :laugh:
(now, thanks to your help-see below)
Sent from my I9000 running JW5 with Xperia I9000 and Devil Kernel