Hey guys, stuck in a bootloop after attempting to flash Fugumod on CM7.1 stable on my Samsung i9000 rom as per the title!
Any ideas?
Thanks for the help in advance
had the same problem. Just flash back to stock using Odin as long as you can get into Download Mode. Can you?
Yup can get into download and clockwork no prob. Back to the stock cm7.1 kernel? Where would i find the .tar for that? Or any other .tar that would let me boot and backup everything?
Cheers!
having the same problem...
I've tried Glitch, Platypus and neither of them can pass the boot screen.
But Fugu works in a mod rom based on CM7.1.
Would anybody help us?
I flashed Glitch and booted no prob. Seems a tad unstable though and would prefer to flash back to the stock cm7.1 kernel. Anyone know where to find just the kernel?
CapricornOne said:
I flashed Glitch and booted no prob. Seems a tad unstable though and would prefer to flash back to the stock cm7.1 kernel. Anyone know where to find just the kernel?
Click to expand...
Click to collapse
Flash the CM7.1 rom again without any WIPE.
If you do wanna backup the stock kernel, after doing what I mentioned above, try SGS Kernel Flasher to extract the kernel.
Related
Hey all,
I'm going between roms now and decided to try Darky 9.3; i flashed back to stock using Odin and then installed hardcore using Odin. My phone has been sitting at the galaxy s screen for 10min now. any suggestions? I know when i installed Cognition it normally took alittle while to convert the file system.
Thanks
You installed a 2.2.1 kernel over stock? Or did you flash a rom with hardcores kernel? If you were in stock I think that is your problem
Odin back to stock. Start over. Flash froyo rom with lag fix enabled by default. Then darkeys
Sent from my Captivate using XDA Premium App
sorry should have been more specific, i flashed back to 2.1, and tried to follow the steps to install speedmod at darky's website
Pull battery, 3button into download mode. Re-Odin to stock. Boot up the stock ROM to make sure it is working.
Install clockwork recovery. Then, flash a 2.2 ROM, and boot it up. After it boots up, you can go back into recovery and flash Hardcore's Speedmod Kernel. As mcord said, you can't flash a Froyo kernel on an Eclair ROM.
I use speedmod with darkyys as well. It works great. I just followed the steps on the darkyy thread here at xda. I always backup and go back to stock no matter what. i just want to be safe. Then i odin to Darkyy 9.2 and proceed to flash via the clockwork recovery installed with 9.2 the new kernal(speedmod) and modem(JK4). Then use the darkyy configurator to install the 9.3. I think because you tried to install the speedmod kernal on top of the 2.1 base it doesn't work that is why you are getting stuck. Here is the link to Darkyy's thread. http://forum.xda-developers.com/showthread.php?t=942046
I think you neglected. To click off autoboot. If you flashed the kernel then entered recovery without letting it boot you would of been fine
Sent from my Captivate using XDA Premium App
Paragon RC6 and 1400 kernel w/ voltage control app
Noob here:
I can run the default 1200 and 1300 kernel no problem. I overclock and undervolt without issue. However, when I flash 1344 and 1400 kernels, the VCA force closes every time. Any thoughts out there?
Sorry, im new to all this! I have a stocked rom and stocked kernel i had no way to get to the clockwork recovery so i tried flashing talondev kernel and my wouldnt start anymore so then i flashed the setrion kernel and it worked fine but iwanted to install the contiuumm rom and then i tried to install it from the recovery and my got bricked! i unbricked it and restored it stock again but i dont know where to start again! please help me im still a noobie to all this, but ireallly want that rom!
First off do you have Gb bootloaders? Secon after you flash Talon turn on recovery (i897 bootloaders Vol up and down + power button, i9000bootloaders down+power)
is this it? http://forum.xda-developers.com/showthread.php?t=1129821
so i just flash that and then flash the talon one? but will that get me to the clockwork recovery too?
according to this Flash GB bootloaders and flash the kernel and it should work. Mind you that's a I9000 rom and it should work with I897 bootloaders but I've never tried it. But I usually recommend I897 over I9000's just because its native, but its a thing of choice i guess.
I can flash directly from Gingerbread? I tried 2 times with OdinOne Click flash but I have not flash because Odin gets stuck in factoryfs. Thanks to USB JIG I managed to revive my Captivate.
yes you can, but why?
odin sometimes locks up. keep trying. where did you get this one click?
Here: http://forum.xda-developers.com/showthread.php?t=731989
I will try with a file .tar i got. I need Flash CyanogenMod 7.1, the Stock ROM Gingerbread is worse than Eclair, I am disappointed, I thought it would be better
Another question. It is necessary wipe/data before flash with Odin?
Just flash CM7 from where you are now. And Odin wipes it for you
Sent from my CM9 ICS i897 Captivate
Are you sure that I can flash directly from Gingerbread 2.3.5 (Stock) to a ROM CyanogenMod 7.1 (Official)? Had I known it would not be with the disastrous Stock ROM 2.3.5. And from any Custom Kernel? I have Corn Kernel v7.06
Yes flash it with CWM Recovery and it will boot loop (supposed to happen). Pull the battery and put it back in. Boot into recovery and wipe everything then flash CyanogenMod and Gapps. Reboot and you're good to go. If you wanna flash a custom kernel I recommend Glitch 13.1
This is the first time I've had this happen - see many others in similar situation but now it's me :-(
I was rocking the most stable, smooth and battery- life- loving setup of ICS ever on my i9000 after trying almost all of the Roms and kernels out there.
In the end the Elite7.1Beta worked amazingly for me and I set it all up just nice and really had no reason to start messing with it.
....So I messed with it (to get even better battery life) and flashed the B6 ICY Glitch kernel and then - bootloop.
So I need an ICS/CM9 tar kernel file (any with CWM recovery will do) that I can use to reflash the original Devil 15.1 kernel.
Believe me, I've searched and serched and simply cannot find a tar version of any of the main ICS kernels out there (glitch, semaphone, devil etc). Why are there no more tar files anymore? Am I missing something?
I've even tried extracting the kernel from boot.img using cygwin and a tutorial I found on the net - but being an untran00b I did something horribly wrong and now thank goodness I can still get Download mode.
So:
Can someone please let me know where I can find a .tar kernel for ICS/CM9 that I can flash with Odin? Or how to make one from a kernel .zip or boot.img file?
OR: Can I just flash a boot.img in Odin (doesn't look like it but just wondering?) I'v not tried that because I've messed this up enough already.
Any help greatly appreciated
alsheron said:
So:
Can someone please let me know where I can find a .tar kernel for ICS/CM9 that I can flash with Odin? Or how to make one from a kernel .zip or boot.img file?
OR: Can I just flash a boot.img in Odin (doesn't look like it but just wondering?) I'v not tried that because I've messed this up enough already.
Any help greatly appreciated
Click to expand...
Click to collapse
Try this, it should get your cwm back
unpack and flash as pda in odin
ssdd48 said:
Try this, it should get your cwm back
unpack and flash as pda in odin
Click to expand...
Click to collapse
well i was in the same situation and i didnt have ssdd48 to help me ..
try his method i have read that it works .. if not i believe there is a speedmod kernel which has a tar file google that
for me eventually nothing worked so i had to flash a gingerbread rom thru odin and start over .. good luck
Thanks for the replies guys. Managed to fix it in the end using Darkcore kernel which gave me working recovery (even though Gingerbread based) but really appreciate you linking me the recovery file ssdd48.
Cheers!
I have the same problem with B6!! But I use the ssdd48 way, and it works perfectly (really thanks), after that y flashed again B6 via CWM and it works fine.
I might be wrong but doesn't Heimdall support flashing boot.img?
Sent from my GT-I9000
Thanx man ! I've Been waiting for a fix reocery tar for ICS.
ssdd48 said:
Try this, it should get your cwm back
unpack and flash as pda in odin
Click to expand...
Click to collapse
hey mate, when you flash a kernel you dont lose any data right? I only need to get into CWM because I get bootloops and then I will reflash semaphore kernel
should "auto reboot" in odin be enabled?
romdroid. said:
hey mate, when you flash a kernel you dont lose any data right? I only need to get into CWM because I get bootloops and then I will reflash semaphore kernel
should "auto reboot" in odin be enabled?
Click to expand...
Click to collapse
There is no harm in it being checked. Lets you find out straight away that its been fixed
thanks
ssdd48 said:
Try this, it should get your cwm back
unpack and flash as pda in odin
Click to expand...
Click to collapse
thanks! it works!
Interesting.
I just re-flashed the ROM via CWM.
It includes a kernel.
If that didn't work, I'd use the kernel cleaning script, and the re-flash the ROM.
Hi,
I tried to flash the datafix for CM9 but it got me into a bootloop (using semaphore 1.0.1s kernel).
I flashed this file to fix the recovery but from here things aren't going so well...
I tried to restore my nandroid backup - didn't work (tried to restore only /system though, but saw it failed).
then I tried to reflash CM9 (19.4 nightly) - failed.
then I tried to reflash the semaphore kernel - succeeded but now my phone is stuck on the "galaxy S gt-1900 screen" (I can get into the recovery though, the one included in the fix).
What can I do now? I can't even get my phone to boot...
Thanks!
TheeWolf said:
Hi,
I tried to flash the datafix for CM9 but it got me into a bootloop (using semaphore 1.0.1s kernel).
I flashed this file to fix the recovery but from here things aren't going so well...
I tried to restore my nandroid backup - didn't work (tried to restore only /system though, but saw it failed).
then I tried to reflash CM9 (19.4 nightly) - failed.
then I tried to reflash the semaphore kernel - succeeded but now my phone is stuck on the "galaxy S gt-1900 screen" (I can get into the recovery though, the one included in the fix).
What can I do now? I can't even get my phone to boot...
Thanks!
Click to expand...
Click to collapse
Anyone?
Yes!
I was having the same problem, for 2 times now actually. The first time I had to go all the way back to gingerbread. Now it happened to me a second time, I searched again and found a solution.
I think the rescue .tar doesn't have the right CWM in it to install the ICS rom. I've found a Odin installable kernel with the right CWM, its here:
http://forum.xda-developers.com/showthread.php?t=1551410
I hope this helps more people in this situation!
TeKnoID2 said:
Yes!
I was having the same problem, for 2 times now actually. The first time I had to go all the way back to gingerbread. Now it happened to me a second time, I searched again and found a solution.
I think the rescue .tar doesn't have the right CWM in it to install the ICS rom. I've found a Odin installable kernel with the right CWM, its here:
http://forum.xda-developers.com/showthread.php?t=1551410
I hope this helps more people in this situation!
Click to expand...
Click to collapse
Thank you!! worked perfect
If I use Odin, everything will be wiped and is gone am I right?
Hello there guys.
I just need a little help here.
I rooted my phone for the first time using speedmod kernel then i saw hydracores most recent kernel and i tried it out.
After a day of testing i found out that in my phone it has a camera bug where the image stays on the screen after taking a shot. And based on my experience speedmod kernel is better for me.
So in short, i want to go back to speedmod (currently on hydracore).
I tried to flash it thru mobile, pc odin and even cwm but after reboot, its just black screen after samsung gt n7000 flash screen.
But when i revert back to hydracore using either pc odin or cwm it continues to boot.
Tried this a couple of times but the result is just the same so i have no choice but to stick to hydracore for the mean time.
Questions:
Am i missing some steps or is hydracore kernel preventing me from flashing to a different kernel?
Is there any other way i havent tried to get back to speedmod?
Thanks in advance to those who can help me out. )
fpjteng said:
Hello there guys.
I just need a little help here.
I rooted my phone for the first time using speedmod kernel then i saw hydracores most recent kernel and i tried it out.
After a day of testing i found out that in my phone it has a camera bug where the image stays on the screen after taking a shot. And based on my experience speedmod kernel is better for me.
So in short, i want to go back to speedmod (currently on hydracore).
I tried to flash it thru mobile, pc odin and even cwm but after reboot, its just black screen after samsung gt n7000 flash screen.
But when i revert back to hydracore using either pc odin or cwm it continues to boot.
Tried this a couple of times but the result is just the same so i have no choice but to stick to hydracore for the mean time.
Questions:
Am i missing some steps or is hydracore kernel preventing me from flashing to a different kernel?
Is there any other way i havent tried to get back to speedmod?
Thanks in advance to those who can help me out. )
Click to expand...
Click to collapse
you must state what rom are you in... JB ICS OR GB..
Speedmod wont work on JB while Hydracore works on AOSP AOKP CM10 JB. and Hydracore doesnt work in TW JB
if you are on JB of course your phone wont boot if you flashed Speedmod.. Speedmod is for ics.. try flashing compatible kernel for your rom
mistajoe83 said:
you must state what rom are you in... JB ICS OR GB..
Speedmod wont work on JB while Hydracore works on AOSP AOKP CM10 JB. and Hydracore doesnt work in TW JB
if you are on JB of course your phone wont boot if you flashed Speedmod.. Speedmod is for ics.. try flashing compatible kernel for your rom
Click to expand...
Click to collapse
Im on stock Ics 4.0.4.
Both speedmod and hydracore are working fine on my note, my concern is that i cant revert back to speedmod from hydracore.
if you are on hydracore v7,the you need to flash a revert.zip file from the hydracore thread followed by the speedmod kernel.
as v7 has updated drivers, you need to revert back before flashing a kernel with old drivers.
nokiamodeln91 said:
if you are on hydracore v7,the you need to flash a revert.zip file from the hydracore thread followed by the speedmod kernel.
as v7 has updated drivers, you need to revert back before flashing a kernel with old drivers.
Click to expand...
Click to collapse
Cant thank you enough. Back to speedmod kernel now. Ü
More polite forumers like you = much less noobs out there. )