Related
I wonder if anybody knows if it is possible to have two (or more) divices connected at onceon a Blue Angel?
eg. Tom Tom 6 plus a hands free connection.
I have tried every configuration I can think of, different ports ect, but to now avail.
With the gps connection up and running, as soon as you turn on the hands free , the gps connection link is lost, turn off hands free and it will resume connection.
I am using BA WM5 AKU3.5 R4 - xplode's excellent rom
In GPS settings
Program is using COM 5
Hardware is using COM 0
Manage GPS settings set to Auto
In Device settings,
BTGPS unit is on COM 0 (Serial box ticked)
Hands free is unassigned
Any help will be much appreciated.
any idea's anyone?
On Last Baniaczek's ROM I made an experiment just a moment ago: BlueAngel, Navigation system (Polish one, Automapa), plus GPS on Bluetooth and A2DP headset - first connected headphones, then added GPS (using automatic GPS connection - it's M$ Stack) - Everything seems to be working fine. I thought it was a bit unstable at first, but AD2P stops sending data, when there is no sound from the device.
GPS Settings are default: COM6 for applications and GPS has COM7 assigned on Hardware tab and in Bluetooth outgoing port. Quite seamless.
then I made the 2nd one: same headset connected in Handsfree mode: indeed turning on navigation made it connect and disconnect every few seconds.
For me it seems to be fault of M$ BT stack: it cannot hold 2 similar streams on BT (COM and Handsfree/Headset are both typical serial connections of highest priority in BT stream). At the same time it can cope easily with two different streams (A2DP is lower priority, high-bandwidth BT connection).
I'm not sure, but I think when I used old Helmi 1.3.2 with Widcomm stack it could cope with GPS and Handsfree at the same time, but it needs more testing.
jakubd is right it is limitation in MS BT Stack
Don't give up and it should start to work. I have similar problem with BT GPS and BT headset. GPS goes on and off while headset is on. And than I try to switch headset off and on, BT off and on, GPS off and on and after some time it start to work together with no problem. It takes first 10-15 minutes of my voyage but then it works for the remaining few hours.
Sorry, but I still didn't find out what combination make it work. If I do, I will post it here as workaround.
And I'm almost sure that I had no such problem with Helmi 1.4 ROM.
Thanks guys,
have tried every configuration I can think of, but its always the GPS connection that is dropped, not the hands free, this would not be a problem if it was just when you are answering a call.The GPS reconnects only when you disconnect the hands free connection. ?
Has anyone Successfully used the Widcomm stack with this type of setup?
I am sure alot of members would find this usefull if it can be made to work!
This is my experience:
ROM : Helmi_BA_WM2k5_AKU3.5_v1.4.CF2.R2 (baniaczek)
Tom Tom 6
GPS : Bluetooth
Headset : Nokia BH-300
When the headset is on and connected, the GPS doesn't work (TT say no GPS found). When I turn off the headset, the GPS is working.
With ActiveSync I have the same problem: when the headset is turned on, I can't establish a connection with the PC via bluetooth.
BUT!
If I use a different headset, a Logitech HS03, all is working fine. I can leave the headset on and the GPS is working. I can receive incoming calls with no problem (using the headset) while I'm driving without loosing GPS signal.
With ActiveSync is the same: I can connect my PC with the headset on.
I have no idea why there is this difference with these two headsets, but one is working and the other no. I don't know if the problem is the MS BT stack, but my test demonstrates that under some circumstances this stack could manage more than one connection at time.
bigmike said:
I don't know if the problem is the MS BT stack, but my test demonstrates that under some circumstances this stack could manage more than one connection at time.
Click to expand...
Click to collapse
Bigmike, my point exactly. As I wrote in my post I keep turning on and off until finally it works. So there are some circumstances under coexistence is possible.
It seems that devices try to use same port which means that first device does not reserve port for itself. I am not an expert but it seems if we could somehow force devices to use different ports problem would be gone.
bigmike said:
If I use a different headset, a Logitech HS03, all is working fine. I can leave the headset on and the GPS is working. I can receive incoming calls with no problem (using the headset) while I'm driving without loosing GPS signal.
Click to expand...
Click to collapse
If this works with one set and doesn't work with another, it might be connected to list of profiles supported by the headset:
1. Headset - HSP - more common, typical profile for use with cell phones (supports AT commands)
2. Handsfree - HFP - audio-centric, used mostly in cars, less common
http://en.wikipedia.org/wiki/Bluetooth_profile
My SonyEricsson HBH-600 has both profiles (checked with services list on SonyEricsson phone), but I don't know how to select which profile is used by headset.
Just a thought...
sassa said:
Bigmike, my point exactly. As I wrote in my post I keep turning on and off until finally it works. So there are some circumstances under coexistence is possible.
Click to expand...
Click to collapse
I hope you haven't misunderstand my previous post. I haven't in mind to minimize the value of your post (very useful is someone will try to investigate about this problem).
I was thinking that somebody, reading your contribute, could wrongly think: “you're are a lucky guy and turning on-off the headset repeatedly you crash some library and the two devices are working together”.
My intention was to remark the fact that under some circumstances the headset and the gps can connect together every time and always at first try: it's not lucky, crash or random events.
jakubd said:
If this works with one set and doesn't work with another, it might be connected to list of profiles supported by the headset
Click to expand...
Click to collapse
I have a similar thought.
It seems to me that some times ago I have read that it should be possible to change some profile's parameters “playing” with the registry.... but I could be wrong...
bigmike said:
I hope you haven't misunderstand my previous post. I haven't in mind to minimize the value of your post (very useful is someone will try to investigate about this problem).
Click to expand...
Click to collapse
No I have not, bigmike, just the opposite. I was delighted that somebody confirmed my point.
bigmike said:
My intention was to remark the fact that under some circumstances the headset and the gps can connect together every time and always at first try: it's not lucky, crash or random events.
Click to expand...
Click to collapse
Couldn't agree more. And I think it's worth trying to resolve it.
Multiple BT connections - solution?
I think I find a solution for this, or maybe we can call it workaround. At least it works for me.
As I wrote in my previous posts, I could make it work every time just didn't know how. Now I established repetable procedure which worked every time for reasonable number of experiments.
Secret was to turn on BT headset (in my case Plantronics) and BT GPS device (Haicom 406-BT) and GPS program (iGo) first, and then go to Comm Manager and turn bluetooth on.
So my procedure is:
1. make sure that BT is off in Comm Manager
2. turn on BT headset
3. turn on GPS device
4. open iGo program
5. minimize iGo
6. turn on BT in Comm manager
7. open iGo and make sure it's connected
8. go to phone and call myself just to make sure it works
9. back to iGO and make sure it works
If 8 or 9 fails for the first time, just turn BT off and on again in Comm manager and check it again. I never need to do this more than twice.
Try this, guys, and good luck.
P.S. I don't know if it matters, but make sure that in Settings/Connections/GPS "GPS program port" and "GPS hardware port" is set to (None) and "Manage GPS automatically" unticked.
Very good! Many thanks Sassa!
I have tried for two times your procedure and both tries worked very well (with TomTom6 and Nokia BH-300)
I use a slightly different procedure:
1. BT off in Comm Manager
2. turn on BT headset
3. turn on GPS device
4. turn on BT in Comm manager
5. open TomTom 6 (wait some seconds and make sure it's connected)
6. go to phone and call myself (on the first call the headset is disconnected)
7. back to TomTom and make sure it works
I have noticed a different behavior of the BT headset having the BT always on (in Comm Manager) and using this procedure... but I need to make some tests before writing more.
I have a slight problem with my gps, i've installed TomTom 6 (not the newest ver.) The problem is that i don't get a GPS signal, It just say "No valid GPS signal" and I do choose TomTom Bluetooth GPS reciver. Is that correct?
I do have a problem with my Bluetooth aswell, my Sony Ericsson HBH-PV705 Bluetooth headset (handsfree) doesn't connect to my TyTN II. I belive there might be some kind of setting that i've missed...
It connected nicley with my Samsung that I had before.
And I have downloaded and Installed the HTC hotfix regarding Bluetooth.
I've tried the search, but I couldn't se that there was anyone else with this problem.
Anyone who know what to do??
First off, are you sure you really need to use the Bluetooth adapter for GPS? After all, it comes with a built in one... I'll show you my config to get an idea:
GPS Receiver - Other NMEA GPS receiver
COM Port - 4
Baud Rate - 9600
I recommend you download and run GPS Test if you haven't already. This will tell you what Baud rate and COM port you should be running on.
In regards to your bluetooth Headset, are you sure you're following the correct process for pairing the device? I remember setting mine up, it was a nightmare... until i read the instruction
I just got my tytn II and am having the same problem. I don't have TomTom, but my gps doesn't seem to work, I tried gps test but after 10 minutes it still didn't tell me anything. I can't get my headset to work either, I paired them, the phone recognizes it, but doesn't let me talk on it.
I think me and Lalla have the same problem, I can't figure it out though =/
Thanks in advance.
Lalla said:
I have a slight problem with my gps, i've installed TomTom 6 (not the newest ver.) The problem is that i don't get a GPS signal, It just say "No valid GPS signal" and I do choose TomTom Bluetooth GPS reciver. Is that correct?
I do have a problem with my Bluetooth aswell, my Sony Ericsson HBH-PV705 Bluetooth headset (handsfree) doesn't connect to my TyTN II. I belive there might be some kind of setting that i've missed...
It connected nicley with my Samsung that I had before.
And I have downloaded and Installed the HTC hotfix regarding Bluetooth.
I've tried the search, but I couldn't se that there was anyone else with this problem.
Anyone who know what to do??
Click to expand...
Click to collapse
Firstly - have you got a TyTn or a TyTn II (AKA Kaiser)? As another poster says, why are you using bluetooth for GPS. The TyTn II has GPS built in!!!
Again as said above if it's a Kaiser you have use "other NMEA" as the device not bluetooth.
If Tomtom says "No valid signal" then it has found a GPS device but is waiting for a strong enough signal. The first time you set up it may take a long time to connect. Leave it in a place with a clear view of the sky. It will also help if you have run Quick GPS from your programs menu.
Mike
edd1e said:
I just got my tytn II and am having the same problem. I don't have TomTom, but my gps doesn't seem to work, I tried gps test but after 10 minutes it still didn't tell me anything. I can't get my headset to work either, I paired them, the phone recognizes it, but doesn't let me talk on it.
I think me and Lalla have the same problem, I can't figure it out though =/
Thanks in advance.
Click to expand...
Click to collapse
Did you change any settings in "External GPS"? This can cause connection problems. (There are fixes for it though).
Mike
mikechannon said:
Did you change any settings in "External GPS"? This can cause connection problems. (There are fixes for it though).
Mike
Click to expand...
Click to collapse
Not sure if I changed it but here are the settings:
port: COM4
Hardware port: None
Baud Rate: 4800
manage gps... is checked
Thanks for your quick reply
I tried gps test but it took about 10 minutes to get 3 bars then I lost 2 :/
Maybe I just need to leave it out for a long time?
edd1e said:
Not sure if I changed it but here are the settings:
port: COM4
Hardware port: None
Baud Rate: 4800
manage gps... is checked
Thanks for your quick reply
I tried gps test but it took about 10 minutes to get 3 bars then I lost 2 :/
Maybe I just need to leave it out for a long time?
Click to expand...
Click to collapse
Actually, that sounds like it's working OK. You will notice that the Kaiser picks up and drops sats every other second. There is a thread about this someplace. In other words as you move around the sat signal will pick up and drop sats as you move (even if you are standing still) When using Tomtom or the like this does not seem to matter and it works very well.
I have found that when you first switch on the GPS make sure you have a clear view of the sky all around, then you can move to more obscured areas and it will hold a proportion of the signal. If you switch on in an obscured area, then it will take a while to acquire a fix. Running Quick GPS regularly will speed things up.
As a guide, if I switch on indoors it can take ten minutes even near a window. In the car it fixes in less than a minute (normally).
The exception is if I last switched off GPS some miles from my current location. It seems it remembers the sats position from when it was last used so if you switch on later some miles away, it takes longer - presumably 'cos it's looking in slightly the wrong place.
Mike
Ok, I'm trying GPS test right now, seems to working. Thanks for your help.
Any clue why my bluetooth headset doesn't work right? Their paired and the phone recognizes it, but I can't use it in a call.
Thanx for all the help from you all!
I've managed to fix the settings for my GPS so it works fine. But the problem with my Bluetooth is still there...but I won't give up!
go to youre bluetooth devices, find your bluetooth headset from the list and tap it. now check and see if both boxes are ticked, the stereo headset and the handsfree. now go back to the list and long tap on the bluetooth headset and set it to handsfree. that should sort it. if not try repairing it
Didn't work for me. My bluetooth headset only gives me a hands free options but it does not work. I tried it on another phone and it works fine.
i've paired a few things (bt headset, parrot car hands free, computer) but it won't automatically connect to anything. i have to manually tell it to connect. is there a setting that i'm overlooking, or a tweak to allow this?
thanks.
Yeah I noticed the same thing in the car today. Maybe because of whether it is discoverable or not? When you turn that on it only does 120secs. I haven't played with it, but i sure hope it can auto connect, or at least with froyo.
It auto-connects to my car, but not to my home phone. I think that's because the car itself initializes the connection... Would be nice to figure out how to fix this, so I wouldn't have to connect manually every time I come home.
wgarrido said:
Yeah I noticed the same thing in the car today. Maybe because of whether it is discoverable or not? When you turn that on it only does 120secs. I haven't played with it, but i sure hope it can auto connect, or at least with froyo.
Click to expand...
Click to collapse
In my 10' BMW, I had to check mark to always allow the car to access my contacts. Once I did that, it would automatically connect to my car upon startup of the car.
Hope that helps.
rajsharma714 said:
In my 10' BMW, I had to check mark to always allow the car to access my contacts. Once I did that, it would automatically connect to my car upon startup of the car.
Hope that helps.
Click to expand...
Click to collapse
in my '10 Genesis Coupe, I cannot get it to auto connect, even though i reset it two times and checked "always allow." This is the first phone this has ever happened with, every other one auto connected (HTC Touch Pro2 with winmo 6.5 AND a hacked android 2.0, htc hero w/ 2.0 and 2.1, n1 w/ 2.1 and 2.2, and a feature samsung phone) so I know its not the car.
Any more ideas?
What I figured out is that auto-connect on this phone just doesn't seem to work at all. The only time it auto-connects is to my 06 Acura when I start it and only if it's not already connected to anything else. But that's because when I start my car, it's the car that initiates a connection, not the phone. If I'm connected to something else (like my home phone, for example), when I start my car, and drive off, Bluetooth connection to my home phone will get dropped after I get away for more than 100 feet, but it will never connect to my car after that. And it never connects to my home phone on it's own. Very painful!:-(
My Captivate will automatically connect to my Parrot hands free device when I get into the car. I don't know which device is pushing the connection. However, I also have a Miccus BluBridge Receiver in my car plugged into the Aux jack. This device doesn't auto connect.
To get things working I have to go to the home screen, settings, wireless, blue tooth, then click on the device. A friend of mine was talking about Tasker as a possible app to use, but I don't really want to spend the money on it until I know it will do what I want. The other annoyance I have is that speaker, headset, and bluetooth volume are all the same. It looked like Tasker would solve my second problem, but perhaps not my first. Has anyone else investigated this?
Bluetooth auto connect
I too thought I had an issue with this. Mine is now working OK most of the time. One thing I discovered is that if there is more than one BT device available the phone sometimes will not connect automatically.
I wonder if this has to do with the fact that it will not connect to more than one device at a time. This is big downside for me that I hope get corrected (but please GPS first)
It won't conect correctly because there is no setting for always visible. The handsfree device searches for your phone to initiate the conection and if it can't see it it won't try to conect.
jbl7979 said:
in my '10 Genesis Coupe, I cannot get it to auto connect, even though i reset it two times and checked "always allow." This is the first phone this has ever happened with, every other one auto connected (HTC Touch Pro2 with winmo 6.5 AND a hacked android 2.0, htc hero w/ 2.0 and 2.1, n1 w/ 2.1 and 2.2, and a feature samsung phone) so I know its not the car.
Any more ideas?
Click to expand...
Click to collapse
I also have a Genesis Coupe 2010 (3.8 in case you care) and my vibrant connects just as well as my TouchPro2 and my Nexus One running Foyo.
The Nexus One stock 2.1 never worked, reconnecting every couple of minutes.
My first Vibrant (same as captivate) did not work well either. I expected it was because the BT stack in Eclair did not support car profile, but after I exchanged my Vibrant due to a rattling volume key, it has worked very reliably with the GC'10. It autoconnects ad soon as I turn on the engine, without having to do anythong, followed by "transfer complete".
I leave BT on all the time. My phone is not rooted or modifief in any way, running stock software for everything.
Sent from my SGH-T959 using XDA App
thumper_1151 said:
It won't conect correctly because there is no setting for always visible. The handsfree device searches for your phone to initiate the conection and if it can't see it it won't try to conect.
Click to expand...
Click to collapse
That is not true and it is not necessary, not even during pairing, ad the connection is initiated by the phone. Once passkeys are echanged, visibility is not required.
Please verify your answers prior to posting to prevent other people from getting confused.
Sent from my SGH-T959 using XDA App
jbl7979 said:
in my '10 Genesis Coupe, I cannot get it to auto connect, even though i reset it two times and checked "always allow." This is the first phone this has ever happened with, every other one auto connected (HTC Touch Pro2 with winmo 6.5 AND a hacked android 2.0, htc hero w/ 2.0 and 2.1, n1 w/ 2.1 and 2.2, and a feature samsung phone) so I know its not the car.
Any more ideas?
Click to expand...
Click to collapse
What firmware do you have on your GC? Have you deleted all phones?
Things to try:
Delete all phones from the car (setup/delete all phones)
Restore the phone to factory settings.
Upgrade the car's radio/BT firmware (see dealership for details or try gencoupe.com)
Call ATT support (?)
Wait for froyo
Get used to
Return/sell the phone
Hope this helps
Sent from my SGH-T959 using XDA App
I have the same issue with my Plantronics Voyager Pro . Can't get it to auto-connect! Anyone have an idea what the problem is?
Sent from my SAMSUNG-SGH-I897 using XDA App
I am a tech for mercedes and we have to set the phone to always visible or it wont auto connect. It is the same way with pioneer bt radios. I am just speaking from what mercedes told us and personal experience with pairing phones. I have had the problem probobly 100 plus times at work where phones wont auto connect evan though they are paired corectly and when you change the phone to always visible it fixes it every time. I know the phone can initiate the conection, i just know they don't all do it automatically.
thumper_1151 said:
I am a tech for mercedes and we have to set the phone to always visible or it wont auto connect. It is the same way with pioneer bt radios. I am just speaking from what mercedes told us and personal experience with pairing phones. I have had the problem probobly 100 plus times at work where phones wont auto connect evan though they are paired corectly and when you change the phone to always visible it fixes it every time. I know the phone can initiate the conection, i just know they don't all do it automatically.
Click to expand...
Click to collapse
Never had the problem with any of the Pioneer radios we've had, and my Eclipse doesn't have that problem either. To be fair, I've no experience with MB cars, but that shouldn't be the case.
I know with my Eclipse HU, I had to initiate the connection while in the phone menu otherwise it would connect for BT audio but not for the phone. After setting up the phone it will connect as its supposed to regardless of what input I'm using.
just as an update to my initial problem... my parrot system in my car auto pairs all the time now (it just takes ~30-45 sec to do so), but the phone still will not auto pair to bt headset or computer...
I don't think its supposed to auto connect to the computer. I think its a need based connection.
And on that note, when i send a file my phone does connect. I don't use a dedicated bt headset so i can't talk about that unfortunately.
Sent from my SAMSUNG-SGH-I897 using XDA App
Lucke said:
just as an update to my initial problem... my parrot system in my car auto pairs all the time now (it just takes ~30-45 sec to do so), but the phone still will not auto pair to bt headset or computer...
Click to expand...
Click to collapse
When you say 30~45 sec, does it mean from powering the car up until BT is usable through the car system? That's is normal and the duration depends on how many contacts you have in your phone book and how many phones per contact. Mine take about the same.
BigJayDogg3 said:
I don't think its supposed to auto connect to the computer. I think its a need based connection.
And on that note, when i send a file my phone does connect. I don't use a dedicated bt headset so i can't talk about that unfortunately.
Click to expand...
Click to collapse
I agree. It is only supposed to autoconnect to devices that support the handfree profiles, if the handfree profile is set as default.
I tired turning visible on right before i started the car and it connected no problem. Really annoying. I have a pioneer as well. Too bad you can't set it to visible always. Other than that it works much better than it did with the Fuze/Any WinMo phone. Never had a phone that worked right in the car, except for my GF IPhone, works great.
I hope it works better in Froyo.
Hi guys,
I am having problems with car BlueTooth hands free and Samsung Galaxy S:
With Eclair 2.1 it was working flawlesly, connected automaticlay after paired, I could make phonecals, receive phonecals, no quality issue, phonebook worked fine etc... The only problem was that once I did not swithced the BT on my SGS before starting to drive, for some security reasons the car was not searching for phones while driving, so I had to turn the BT in car off and on again and then it connected well. But overal problem free...
With latest 2.2 Froyo (i9000xfjp7) and also previous Froyo distributions (i tried JPA if I remember correctly), the phone can be paired, it connects to the car but after one phonecall it looses connection and works no more. The strange thing is, the BT icon on the phone shows brackets (like when connected) and also the car shows the phone is still connected. But phonecalls cannot be made via car HF and also cannot be received through it. Only by manualy accepting or dialing on the phone. And naturally the sound goes only via the phone, no HF.
The strange thing is, when I turn off the car and leave it, the phone says it is still connected to it, which is impossible.
Any ideas?
Thank you!
czechmate said:
Hi guys,
I am having problems with car BlueTooth hands free and Samsung Galaxy S:
With Eclair 2.1 it was working flawlesly, connected automaticlay after paired, I could make phonecals, receive phonecals, no quality issue, phonebook worked fine etc... The only problem was that once I did not swithced the BT on my SGS before starting to drive, for some security reasons the car was not searching for phones while driving, so I had to turn the BT in car off and on again and then it connected well. But overal problem free...
With latest 2.2 Froyo (i9000xfjp7) and also previous Froyo distributions (i tried JPA if I remember correctly), the phone can be paired, it connects to the car but after one phonecall it looses connection and works no more. The strange thing is, the BT icon on the phone shows brackets (like when connected) and also the car shows the phone is still connected. But phonecalls cannot be made via car HF and also cannot be received through it. Only by manualy accepting or dialing on the phone. And naturally the sound goes only via the phone, no HF.
The strange thing is, when I turn off the car and leave it, the phone says it is still connected to it, which is impossible.
Any ideas?
Thank you!
Click to expand...
Click to collapse
Had exactly same issue I changed to Doc Rom JP8, for last 3-4 days didn't face any issue.
Monu123 said:
Had exactly same issue I changed to Doc Rom JP8, for last 3-4 days didn't face any issue.
Click to expand...
Click to collapse
That is weird... When I switch back to Eclair, it works OK, back to Froyo, no HF after one phonecall...
I dont know how to work with ROMs, I managed to find out how to flash firmwares, I even handled many problems with Odin and its moods, incomplete flashes, etc... But I dont know how to use these custom ROMs...
Anyway, i would appreciate if someone told me how to resolve it without custom ROMs, as I plan to use offical Froyo when it becomes available, but with this issue, it is useless for me, as I travel a lot...
No one else?
I'm having a related problem.
I'm getting music stream cut outs (1 sec max) when streaming bluetooth to caraudio WHILE wifi on.
If i disable wifi, bluetoothaudio works fine. I know they share range bt/wifi, but this is unacceptable. They should negotiate. Everytime wifi scans, i get cutouts. Unusable. Only workaround is disabling wifi (and thats annoying because i have to be constantly activating/disabling it everytime i enter somewhere with wifi etc.
Using Docrom xxjpo v8 with voodoo.
Anyone has some software fix that makes wifi behave better when bluetooth musictream on?
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
chaolanren said:
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
Click to expand...
Click to collapse
i have the same problem as some other people do as well. There's no actual fix, afaik, although the gingerbread roms seemed to have fixed it for me.
You can ask in the appropriate Q&A for your ROM.
chaolanren said:
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
Click to expand...
Click to collapse
bravomail said:
You can ask in the appropriate Q&A for your ROM.
Click to expand...
Click to collapse
in his defense - although I could be wrong, I found that it has nothing to do with one particular rom. I had this problem on stock eclair and many of the custom froyo roms. Once I ran GB, the bluetooth was more reliable.
I'm having the same issue with stock 2.2.
I found a quicker method to fix it.
I downloaded a Bluetooth widget that toggles Bluetooth on and off - this seems to reconnect with my Jeep after the toggle:
com.curvefish.widgets.bluetoothonoff
I'm sure there are a ton of widgets out there; but, you may want to give that a try!
Thanks,
Shawn
I also ran into this as after chatting with Samsung support it turns out that the Galaxy line is set to never auto connect to any bt device even if the connection was already there.
I had trouble with disconnections from my car deck (jvc kw-xr810) when it was trying to share contacts. Once I set the phone to deny contact sharing and set up a separate phone book in the deck, it connects perfectly and never drops.
It's not a perfect solution if you want your whole address book access accessible from the car however.
Sent from my SAMSUNG-SGH-I897 using XDA App
SaintJohnShawn said:
I'm having the same issue with stock 2.2.
I found a quicker method to fix it.
I downloaded a Bluetooth widget that toggles Bluetooth on and off - this seems to reconnect with my Jeep after the toggle:
com.curvefish.widgets.bluetoothonoff
I'm sure there are a ton of widgets out there; but, you may want to give that a try!
Thanks,
Shawn
Click to expand...
Click to collapse
I use tasker for this. I have a task setup that as soon as I turn my car off and BT disconnects, toggle BT off and back on. I noticed that as long as BT is toggled off and back on, it will connect and hold it the next time I use it.
although, I have since turned that task off because GB roms seemed to have fixed the BT issues with my car. I rarely have this problem since switching to gingerbread.
Captivate stock 2.2 intermittent bluetooth problems
I have a stock Captivate with 2.2 android and I'm using a Motorola S10-HD headset to listen to music while I'm at work.
The bluetooth will randomly disconnect causing the music to pause. Sometimes it will reconnect on it's own several seconds later and I am able to continue listening by clicking the play button on the headset. If it doesn't reconnect on it's own then I have to turn off bluetooth on the phone and turn it back on. This will cause it to reconnect but the problem may occur again.
I have switched to listening to music on my Galaxy Tab 10.1 and haven't had any problems so it must be the phone.
Is there anything that will correct the problem?
Is this a defect with my phone or just a design problem with all Captivate phones?