Related
I try to root dell streak 7 by SuperOneClick 1.5.5 or 1.6.5 or 1.7.0. None of them can work. Any one can help on this?
My android version is 2.2.2
Kernel - 2.6.32.9
OEM Version - GLUNB1A133830
Version - 15799
If you search u will find you dont need root just flash clockwork recovery then a rom with root
Sent from my Dell Streak 7 using XDA Premium App
I've been trying to days frying to do the same and I read your post about flashing,I tried and can't get to go into fastboot recovery or use adb. With adv I got as far as cmd recognizing the device
. Sorry I want to root this streak so bad.
Sent from my MB860 using XDA App
chavezop said:
I've been trying to days frying to do the same and I read your post about flashing,I tried and can't get to go into fastboot recovery or use adb. With adv I got as far as cmd recognizing the device
. Sorry I want to root this streak so bad.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
huh? what does adb have to do with it?
You boot into fastboot (search on how)
flash recovery(again search on how)
reboot into recovery (yet again search on how)
flash zip you downloaded in dev section
reboot
you have root
I spent 2 days researching. I think I search to much and got everything mixed up. Ill try researching in that order. Thx
Sent from my Dell Streak 7 using XDA App
By the way I have update2.2.2,I can still root that?
Sent from my Dell Streak 7 using XDA App
chavezop said:
I spent 2 days researching. I think I search to much and got everything mixed up. Ill try researching in that order. Thx
Sent from my Dell Streak 7 using XDA App
Click to expand...
Click to collapse
trust me.. all the information you need to do every single one of those steps is in this forum.. either in the dev section or here.. I dont know why it's taking you two days when I was just able to locate everything(even though I laid out within minutes from just the clockwork mod thread in the dev section.
it tells you 1. How to boot your streak into fast boot
2. tells you how to flash recovery and what commands to issue
3. tells you how to enter clockwork recovery
4. flashing the zip is self explanatory
ive been using dj steve's release 2.0 of honeystreak for a few days and scrolling through the forums on the development threads but i cant seem to find a way access cwm, to confirm i am using:
dell streak 7 wifi version only
honeystreak 3.2 release 2.0 wifi only
and i am accessing recovery from holding down vol+ and power and selecting option 2 (third option down).
i can confirm i have been able to access CWM before i flashed honey streak so i no its not the process of accessing it that im having a problem with, i did flash honeystreak release 1 but later flash release 2.0 for cwm.
please help as the only reason i wanted a dell streak 7 was to have honeycomb and cwm.
cheers guys
Well, when you select update.pkg what does it do???
That should get you CWM, if it does not then something has gone wrong, maybe re-download and re-flash ..
As soon as I click it the screen goes off but the softkey buttons are still on, I have to hold down power key to turn off the device then turn off it back on. I've read on the development forums this is happening to a few people but no one is responding with a fix,
Cheers thanks for the quick reply
Sent from my streak7 using XDA Premium App
Ok i have found a possible reason. I have also flashed cwm with Rom manager which apparently disables cwm on the actual build. Is there a way to revert back to before i flashed cwm with Rom manager. apparently
Thanks
Sent from my streak7 using XDA Premium App
samuelll_p said:
Ok i have found a possible reason. I have also flashed cwm with Rom manager which apparently disables cwm on the actual build. Is there a way to revert back to before i flashed cwm with Rom manager. apparently
Thanks
Sent from my streak7 using XDA Premium App
Click to expand...
Click to collapse
Bump? I'm still having this exact issue.
admiralnorman said:
Bump? I'm still having this exact issue.
Click to expand...
Click to collapse
Are you trying to go back to stock and then root your device again? If so check out my procedure here>>> http://forum.xda-developers.com/showthread.php?t=1252840
Sent from my Dell Streak 7 using xda premium
Hi everybody,
I need your helps.
My Dell Streak 7" is now always "force close" everything after using about 5-10 min. Then I need shutdown and restart, it formatted factory, all my settings, softwares be lost. It's running android 2.2.
I try to update with hoping it will be repaired, but mission impossible.
I think DS7's ROM has errors.
Pls help me how to repair my DS7. How to setup a stock ROM on it?
Thank you very much.
Sorry about my bad English level.
heroofyouy2k said:
Hi everybody,
I need your helps.
My Dell Streak 7" is now always "force close" everything after using about 5-10 min. Then I need shutdown and restart, it formatted factory, all my settings, softwares be lost. It's running android 2.2.
I try to update with hoping it will be repaired, but mission impossible.
I think DS7's ROM has errors.
Pls help me how to repair my DS7. How to setup a stock ROM on it?
Thank you very much.
Sorry about my bad English level.
Click to expand...
Click to collapse
Follow the direction on this thread to restore your ds7.
http://forum.xda-developers.com/showthread.php?t=1252840
otnos said:
Follow the direction on this thread to restore your ds7.
http://forum.xda-developers.com/showthread.php?t=1252840
Click to expand...
Click to collapse
My DS7 is T-mobile 3G version. Which stock ROM is good?
There is only one stock ROM, you use the one with the NVFlash method
cdzo72 said:
There is only one stock ROM, you use the one with the NVFlash method
Click to expand...
Click to collapse
I wouldn't listen that thread has many warnings about only being for the Wi-Fi version only.
Sent from my Dell Streak 7 using XDA App
Smurphjw said:
I wouldn't listen that thread has many warnings about only being for the Wi-Fi version only.
Sent from my Dell Streak 7 using XDA App
Click to expand...
Click to collapse
For you dumbasses too lazy or too ignorant to use the search function ans SEE that there is an entirely different thread for the 4G version here is the link...
http://forum.xda-developers.com/showthread.php?t=1018809
Why link yo the wifi version in the first place?.....either way this is a nand issue. It needs to be serviced by dell.
Sent from my Htcclay's SuperCM7 NS2 using XDA Premium App
Smurphjw said:
Why link yo the wifi version in the first place?.....either way this is a nand issue. It needs to be serviced by dell.
Sent from my Htcclay's SuperCM7 NS2 using XDA Premium App
Click to expand...
Click to collapse
IIIIIIIIIIII DID NOT like to the wifi fix thread, it was otnos's post that linked to the thread... learn how to read the entire thread.
On another note, @heroofyouy2k, IF the NVFlash fix does NOT revive your Streak 7, then Smurphjw is correct, only DELL can fix an Streak that has gotten stuck in Read-Only mode, which is what happened to yours, AFTER you reset from within Android, which is the detail you have probably failed to mention on purpose trolling for a possible fix to your user error
I stand corrected.
Sent from my Htcclay's SuperCM7 NS2 using XDA Premium App
Smurphjw said:
Why link yo the wifi version in the first place?.....either way this is a nand issue. It needs to be serviced by dell.
Sent from my Htcclay's SuperCM7 NS2 using XDA Premium App
Click to expand...
Click to collapse
cdzo72 said:
IIIIIIIIIIII DID NOT like to the wifi fix thread, it was otnos's post that linked to the thread... learn how to read the entire thread.
On another note, @heroofyouy2k, IF the NVFlash fix does NOT revive your Streak 7, then Smurphjw is correct, only DELL can fix an Streak that has gotten stuck in Read-Only mode, which is what happened to yours, AFTER you reset from within Android, which is the detail you have probably failed to mention on purpose trolling for a possible fix to your user error
Click to expand...
Click to collapse
Thanks for your replies.
Yesterday, I tried to update my DS7 with a file follow link mobileupdate.dell.com/?version=GLUNB1A132233&servicetag=9KBM2P1
But it coudn't fix my DS7.
Now, I will try to restore it.
I'm in Vietnam, so I can't ask for warranty services from Dell
i am experiencing same problem here. any good suggestion?
Try to factory reset. If your device just normally reboots without resetting than dell needs to fix or replace it cuz the system has somehow become read only.
Sent from my Nexus S using XDA Premium App
Smurphjw said:
Try to factory reset. If your device just normally reboots without resetting than dell needs to fix or replace it cuz the system has somehow become read only.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
so before dealing with Dell CS, I want to try the T-mobile restore using NvFlash, you think it should fix the prob or it is just a waste of time?
rome2high said:
so before dealing with Dell CS, I want to try the T-mobile restore using NvFlash, you think it should fix the prob or it is just a waste of time?
Click to expand...
Click to collapse
If your system has gone read only its a waste of time.
Sent from my Nexus S using XDA Premium App
so if its read only mode then only dell can fix it?
that would be correct, as of now no one has been able to come up with a solution
cdzo72 said:
that would be correct, as of now no one has been able to come up with a solution
Click to expand...
Click to collapse
dam that sucks cause i think my tablet is also in read only. i did a soft & hard reset & nothing gets deleted. tried going into safe mode but when i see safe mode i let go but then it goes blank then dell logo shows and it boots into regular. im only able to use it for a couple mins b4 i get all the errors & force to quit. So i was wondering since the tablet only works for a few mins what if the honeycomb up suddenly shows up. will updating fix the issue?
james_larson2001 said:
dam that sucks cause i think my tablet is also in read only. i did a soft & hard reset & nothing gets deleted. tried going into safe mode but when i see safe mode i let go but then it goes blank then dell logo shows and it boots into regular. im only able to use it for a couple mins b4 i get all the errors & force to quit. So i was wondering since the tablet only works for a few mins what if the honeycomb up suddenly shows up. will updating fix the issue?
Click to expand...
Click to collapse
No, your system is locked in read-only meaning anything you do will not save or resolve any issues. Even if you download the HC update you'll install it and once your system reboots nothing will change. You can't do a factory reset, you can't do anything. The system is stuck and as of right now the only way to get it repaired is through Dell CS. There are some guys on the forums getting together to try and see if they can solve the issue, which will be a waiting game if you are out of the country.
I was fortunate enough to come across a T-Mobile DS7 very cheap due to it having this read-only error. I called Dell on 10/4/11 around 2AM spoke with the tech, they said they will send me a box to repair it. Today, 10/5/11 I received the box at 8:30AM packaged up the Streak and put it in a FedEX drop box around 10:30AM, will keep you guys posted on how long the process takes for me to get this thing back.
just wanted to jump in on this topic. I had the same issues, (force close errors, read-only mode, etc..), I sent it back to dell after reading the last post and they had it back to me with-in 3 days. Up and running again. Very pleased with the results. I recommend just sending it back in.
I tried to get the downgrade on my phone. I got to the part where I have to install the .dll and it won't let me. Just to be clear that is just on the computer for now correct? Don't flame me for this question. I have rooted and have used custom roms before just never have had to downgrade.
On another note the V6.tot file will that give the devs a chance to root V6?
Sent from my LG 4G
indyred99 said:
I tried to get the downgrade on my phone. I got to the part where I have to install the .dll and it won't let me. Just to be clear that is just on the computer for now correct? Don't flame me for this question. I have rooted and have used custom roms before just never have had to downgrade.
On another note the V6.tot file will that give the devs a chance to root V6?
Sent from my LG 4G
Click to expand...
Click to collapse
I haven't tried to downgrade on a home PC so I don't have any experience on how that is supposed to work..
But the v6.tot is going to be most useful for the latest radio updates, as far as I can tell
Found an iconic home, then revolted
Don't think it will help root.... but that's not as big as an issue as radio updates. You can always downgrade so getting radio is most likely a higher priority
Sent from my VS910 4G using Tapatalk
Any help on this issue of not being able to install the .DLL file?
Sent from my VS910 4G using Tapatalk
I just did this last night to a friend's revo. Give a little more info on the pc, specifically the operating system. I was on win7 x64. I followed This thread and everything worked. Two things though. One, the usb drivers i used were LG VZW_United_WHQL_v2.1.1.exe straight from lg. Two, to install VS910.dll put it in "C:\LG Electronics\LGNPST\Models\" and then right click it and install it.
I suspect something went wrong when you installed the components and genericmodels plugins as the dll will not install unless these are properly installed first.
I'm on the same. Windows 7 x64. I put it in the models folder and its saying use what service open the file. Tonight after work I will start from the beginning and see where its at.
Edit: The drivers to install properly said to reboot. Didn't do that as the instructions didn't say to reboot. Maybe I will try that before anything else.
Sent from my VS910 4G using Tapatalk
I was going to attempt stock upgrade however running into same issues. Also version check is 1.2 lab? In the zip is cdmaworkshop? Any idea?
______________________________________________
sent from my Iconically Revolting LG Revolution powered by MTM
I've been searching and searching.
I have a dell streak 7 with 2.2.2. Its very corrupt. It won't save settings, gets multiple force closes, gets a wifi error and won't uninstall apps.
It won't even factory delete in stock recovery.
I'm baffled and need some help. I can't root get apps etc for some reason.
I need some help!
sent from my sense on crack MT4G Slide using xda premium
I'm reading up on adb and how to install it. Some pointers would be nice as I'm trying to help my friend who messed his thing up.
Thanks in advance whoever can help me.
Couple things id like to add to maybe help anyone who decides to help me.
Factory reset in the os as well as both in stock recovery do nothing.
Most of the apps force close.
he took his sd card out. I can use mine though if needed.
He doesn't care about any data lost.
Anything I delete or undo setting for example will be redone as soon as phone is rebooted or setting is closed.
Wifi says error.
It is a tmobile streak 7 my sim card does work and it gets a signal but nothing else does.
Some solutions I thought of is. Try to find a full stock os
Flash someone else nandroid.
Sbf to stock.
Hence why iam reading on adb. On my phone I use terminal emulator so I have no idea how to use sdk and adb.
Sorry if I. Sound noob. Iam to this device .
sent from my sense on crack MT4G Slide using xda premium
Why does everyone want to be spoon fed everything...
http://forum.xda-developers.com/showthread.php?t=1286295
Sent from my Dell Streak 7 using xda premium
keith.valdez said:
Why does everyone want to be spoon fed everything...
http://forum.xda-developers.com/showthread.php?t=1286295
Sent from my Dell Streak 7 using xda premium
Click to expand...
Click to collapse
Okay I Read this already. It doesnt help me very much. I have the fastboot drivers but I do not have fastboot.exe in the adk.
The ADK does not come with it, and I've searched for it and found nothing that would help me for a dell streak. So if you could post the link to the right fastboot becuase in cmd it tells me fastboot is not a recognized as a internal or external command,operable program or batch file.
I cannot use ADB becuase I cannot check usb debugging it unchecks after I exit the dev section. Yes my ADB is setup right I can use it on my mt4gs perfectly.
Im dling the nvflash method now.
Update.
NvFlash method did not work.
You are stuck if Read Only mode and you have to send it in
cdzo72 said:
You are stuck if Read Only mode and you have to send it in
Click to expand...
Click to collapse
I agree. Your symptoms sound very similar to what I was experiencing on my t-mobile Streak 7. I sent it to Dell for repair and it works great now. Takes about 2 weeks for the whole process.
Call Dell support and they will eventually tell you that you need to send it in after having you try several things over the phone. They will ship you a box and pay for the postage to send it to Mexico.
Good luck.
cdzo72 said:
You are stuck if Read Only mode and you have to send it in
Click to expand...
Click to collapse
How does one get into read only mode? I ask this because hopefully he won't make the same mistake again with me informing him.
sent from my sense on crack MT4G Slide using xda premium
BTW got adb and fast boot working. Cannot flash anything to the system. Dang it I hope dell will take this and fix it, I dont think he has all the paper work.