Related
I have a peculiar problem.
I flashed a Doc Rom yesterday. After restarting the phone simply will not go past Black white samsung screen. I thought something might be wrong and flashed JPY firmware using odin. It was successful. But everything is fine except that the phone will not go past the Galaxy S boot animation screen. When I went to recovery mode it is showing an error message which goes something like this" cannot mount media. sd card requires preparation. go to the UI and format and boot options." I have got 3 button recovery as well as download mode. Is it possible to correct this error using ADB? Can somebody guide me. I am desperate as I love my phone very much.
i will not look for the problem cause ... if you have cwm check if lagfix is disabled and flash new rom via "install zip file" in cwm ... don't worry your phone is fine
Sent from my GT-I9000 using XDA App
themate1987 said:
i will not look for the problem cause ... if you have cwm check if lagfix is disabled and flash new rom via "install zip file" in cwm ... don't worry your phone is fine
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
At present condition, I have no CWM. I have only recovery 3e. Is it possible to flash CVM rhrough Odin?
If you can flash voodoo kernel, that has CMW inbuilt? Then try and figure it out from there?
I solved the problem by doing the following steps:
1. followed this link http://forum.xda-developers.com/showthread.php?t=807784 and flashed XWJM8 whatever that may mean.
2. Voila after flashing the above with odin my phone restarted with familiar UI.
3. Suddenly I noticed that my phone does not have an IMEI and my sim card not detected. I was tempted to copy my backed up EFS folder and I resisted the temptation. Instead I copied the CWM and Doc's rom which I was using prevously to the External SD and afterwards copied the same to Internal SD.
4. I started my phone in recovery mode and i could see that still the error message was there. But I flashed CWM and again flashed Doc's Rom. After the phone restarted, I found that my sim was detected and everything was back to normal. OMG what a relief it was.
5. Thanks to XDA and it's members for helping me.
if u have root acess (and i hope yes)
u have to restore system, turn off and than turn on pressing home and volume up, 3 bottons in same time, than with volume keys and home choose BACKUP AND RESTORE, than ADVANCED RESTORE and than SYSTEM, if u have maked a backup u have to chose that backup or one of them if u have more. let him restore and choose REBOOT PHONE. now u have phone again.
if u need some help email me [email protected]
---------- Post added at 11:58 AM ---------- Previous post was at 11:56 AM ----------
seking said:
I have a peculiar problem.
I flashed a Doc Rom yesterday. After restarting the phone simply will not go past Black white samsung screen. I thought something might be wrong and flashed JPY firmware using odin. It was successful. But everything is fine except that the phone will not go past the Galaxy S boot animation screen. When I went to recovery mode it is showing an error message which goes something like this" cannot mount media. sd card requires preparation. go to the UI and format and boot options." I have got 3 button recovery as well as download mode. Is it possible to correct this error using ADB? Can somebody guide me. I am desperate as I love my phone very much.
Click to expand...
Click to collapse
Borrowing the tread. I was using CM9 and installed NStools and after a while my phone rebooted and started then froze at my homescreen. I went in to recovery and did a factory reset and the phone worked again. So I tried installing NStools again and got bootloops so I did a factory reset again but now I get bootloops and I can't go in to recoverymode.
My question is can I just flash EZbase 4.0 (Gingerbread) and then flash CM9 directly from it?
Thanks.
Normally I wouldn't post a thread, searching is quicker & requires less hanging around...but I am at my wits end now!
I am trying to install a new ROM on my phone but everything I try causes me issues.
I have got to the stage where I am trying to install a ROM (Darkyys). I have downloaded the ROM and put it into my internal SD card, home directory.
I have installed ROM manager, flashed clockworkMOD Recovery, and have restarted into recovery mode from that.
Now, the recovery mode is blue writing (if that helps).
I have cleared everything & go down to ''apply sdcard:update.zip'' and I get an error message which says:
'' E:signature verification failed. Installation aborted.''
Now, I have googled every tutorial, every error message and nothing has brought details up on how I get out of this loop.
Can anyone shed any light on it?
Cheers guys
edit: The recovery mode is 3e, and has - For BML - on it, if it helps?
the blue writing,, i think that is stock recovery mode, u need to get clockworkMod you will have to download that and flash it through recovery using the process you have already been trying for darkys rom..
when you have clockwork mod, your selecting the wrong thing. you wanna select update from sd card. then select chooze zip from sd card. then there you will see darkys rom (looks something like Darkyys vXX-wipe version.....zip)
Thanks for the post mate, the only options I have are;
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
format internal SD-card
Which is what's throwing me off currently!
yes get yourself clockworkMod from here: http://www.multiupload.com/5CUIK88JM0
once downloaded put it on your sd card (internal) then apply sdcard:update.zip ( you may need to do this more than once) when its done the recovery menu will be different. than you can flash darkyys ROM
When I open ROm Manager, the top link says 'Flash ClockworkMod Recovery', I select this first and it seems to install it fine. Below it ssays:
Current Recovery: ClockworkMod 2.5.1.1
Latest Recovery: ClockworkMod 2.5.1.1
Selecting the option below to 'Reboot into recovery' just brings me back tot he blue writing above!
edit: Ill try that now, thanks mate!
Thanks mate, though I am now getting the error message:
E: Failed to verify whole-file signature
E: signature verification failed
Installation Aborted.
Damn
thats weird.. what version of darkys rom are you trying to flash, you could try flashing speedMod kernel thru ODIN, takes 10 seconds and will remove standard recovery and replace with clockworkMod. then you can flash any rom you want. and even option to root/unroot.. built in lagfix and tweaks. very good kernel im running it now.
The latest version...8.0. I cant even get to the stage of the flashing the ROM though, the recovery mode is just not playing ball.
I have spent all evening trying to sort this, I don't suppose you could give me a brief run down on ODIN could you? Searching brings up everything under the sun!
edit: I am downloading it now.
your downloading what ?
I have downloaded ODIN, but am struggling to find instructions on it. I can gather it is another form of installing a ROM onto the phone, but you need to do so in the download mode?
edit: downloaded ODIN, have the .pit file and the .tar file in a separate folder, how do I flash the ROM...is that done using ODIN? Sorry for the questions, struggling to find usable instructions that explain the steps properly.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Thats step by step guide to flashing a kernel.. that will put CWM as default recovery.. you dont have to keep the kernel as darkys 8.0 has its own built in voodoo kernel which is also really good.
but flash the kernel in the link above first ^^^ as that will allow you to flash anything you want thru CWM then you shudnt need to use ODIN again really..
Cwm only works on 2e recovery not 3e. Download cf root for your firmware and flash it with odin. Put the cf root file in the pda section and do nothing else. Put phone in download mode, connect to computer and hit start on odin. Done. You will have 2e recovery and can now flash darkys or other.
Sent from my GT-I9000 using XDA App
thats another way of doing it yes. thanks for pointing that out sxi200
cf-root attached,
I ran ODIN & followed those instructions to the letter. My phone has been sat there for 10mins now and ODIN hasn't changed off 'SetupConnection'.
How long does this take, is it normal? Thanks again for your help!
I take that file, put it in ODIN folder & select it instead of the speedmode Kernal?
are you trying to flash darkys WIPE version or NO WIPE version ?? flashing a kernel only takes ten seconds.. does it not say pass in the top box on ODIN ??
Andehh said:
I take that file, put it in ODIN folder & select it instead of the speedmode Kernal?
Click to expand...
Click to collapse
yes u have to extract it first to get the .tar file
Some progress, I have got the 2e recovery mode now. I went to apply sdcard:update.zip, hoping to change the recovery mode over to CWM...but it only looped back to where it was before...the 2e recovery screen with apply sd card, reboot, and wipe data & cache being displayed.
Tried it for a second time & I am now in the CWM recovery mode, with the green lettering. Only issue now is I can't select (using home button) any of the options, i can scroll up and down though!
edit: power button does select, not home...seems to be doing something now! Will report back shortly!
haha that got me first time i installed CWM if you flash ROM it can take a while to boot, sometimes on my phone upto 15-20mins so dont panic if your phone doesnt respond, just keep your eye on the writing on CWM once it says update complete / successful all is good.. it will boot eventually.
Hi all,
I have 2.2 running on a Rogers Samsung Captivate. Rooted with SuperOneClick and installed ROM manager. Been trying to get Cognition going, following every set of instructions to the letter multiple times, but the problem is that whenever I reboot in recovery mode I never see the CWM screen. I get a screen with blue and yellow characters, then I select 'reinstall' packages and it always aborts. How do I get to the CWM screen so I can actually apply update.zip and get to Cognition 3?
Thanks so much, any help is appreciated! I just don't understand what I'm doing wrong!
you should flash CWM recovery on the app, then reboot and then reinstall packages twice.
in the rom manager, make sure you click "Flash ClockworkMod Recovery" first.
another way is to copy the update.zip to your sdcard root dir, then go to the recovery and reinstall packages twice.
NewbDroid said:
Hi all,
I have 2.2 running on a Rogers Samsung Captivate. Rooted with SuperOneClick and installed ROM manager. Been trying to get Cognition going, following every set of instructions to the letter multiple times, but the problem is that whenever I reboot in recovery mode I never see the CWM screen. I get a screen with blue and yellow characters, then I select 'reinstall' packages and it always aborts. How do I get to the CWM screen so I can actually apply update.zip and get to Cognition 3?
Thanks so much, any help is appreciated! I just don't understand what I'm doing wrong!
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=909213
Hello all,
[DEV][RC2]ICSSGS Source [Android 4.0.3]
I have tried to flash my phone with the ICS....I made a mistake at the starting...instead of wiping out the data I have tried to flash it directly and i got blank screen showed up.....
Then, I have downloaded oneclikc ODIN and flashed it with speedmode kernel.....and able to start recovery mode...but I am not able to flash ICS from my SD(external card) and I have tried to reboot the phone and it got stuck on reboot screen......
But I am able to got to recovery mode using KEY combination and download mode using key combination and USB cable.......
I really need a way to fix this.....
Please tell me how to at least get access to external SD card from recovery screen....
Thank you......
Flash a kernel with CWM 5.x. It has the option to install zips from the external SD. Most roms now require CWM 3.x or newer to flash. I believe Speedmod uses 2.x. If your recovery menu is green, you need a newer recovery and thus, a newer kernel, to flash.
Sent from parts unknown.
Boraltis said:
Flash a kernel with CWM 5.x. It has the option to install zips from the external SD. Most roms now require CWM 3.x or newer to flash. I believe Speedmod uses 2.x. If your recovery menu is green, you need a newer recovery and thus, a newer kernel, to flash.
Sent from parts unknown.
Click to expand...
Click to collapse
Thank you for your help...
I have tried flash different kernals....but still when i entered the recovery mode i am still seeing speedmod kernal....(green Color)....I am not sure of what to do...
here is what I am doing....
I am connecting the phone to Computer in Download Mode using ODIN....
then using PDA I am updating the kernal....most of the times it said success....
and when I go back to recovery I can still see the green menu.......
I am not able to access ICS, please help me out with this.....
Thanks
By any chance have a update.zip in your sdcard?
no I don't think so.....i tried to do it couple of times...... but it said that there is no such file
Seems you just might have flashed a very old stock rom. I recommend just flashing stock KH3 w/ boogs kernel. That's always worked wonderfully for me.
So the phone tunred black screen when 1 day i was trying to turn off the wifi( if i remember correctly),
and then i started it again using power button, after showing the logo and boot animation, sunddenly it(sometimes during the boot animation) turned black screen and dead.
I got to recovery successfully and installed again the last custom rom(paranoid rom 3.x) and gapps i installed couple of days ago, and then reboot , same thing happened, couldnt get past the boot animation,, done factory rest, wipe everything and installed the last rom and gapps, same thing. (it's the only rom i had on my internal /sdcard which in the recovery i can browse through with no problem)
i tried to push another rom to /sdcard/ using adb, i can see my device under "adb devices" fine but it gave me "unauthorized devices" error.
then i downloaded the latest stock rom(4.1.2) and flashed using odin, flash completed successfully but still again same thing happens, cant get past the samsung boot animation.
----
after flashing the stock rom, now i cant even get into recovery,... and it seems there's no flashable recovery tar file for n7000.,...
any ideas?
thanks in advance
There is a tar flashable kernel. Philz
nokiamodeln91 said:
There is a tar flashable kernel. Philz
Click to expand...
Click to collapse
thanks for the reply!
i flashed the recovery using odin, but still cant get into it
then i accidently found that i can get into recovery mode when usb plugged in,,, but if i try to flash in that recovery mode, it will fail and end in black screen..
guess im completely fked and maybe it's due to some weird, hard-to-replace, unexpected, hardware problem,,,
In the Philz CWM recovery, are you able to format data and cache partitions?
nokiamodeln91 said:
In the Philz CWM recovery, are you able to format data and cache partitions?
Click to expand...
Click to collapse
yeah , i was able to,,,
and also i was able to mount the storage to my desktop and copied a couple of roms and recovery to it
but still cant flash them in the recovery casue black screen will occur druing the "installing update" phase, before any of the process bar was even filled