I am trying to do this HardSPL on my Topaz. After installing the enablerapinew.cab on the phone, I get this error when I try to do the automatic flash:
Please make sure the phone is still connected to the PC and is synchronized.
The phone is synced, and it's connected as well. What's wrong?
I copied the manual HardSPL file on the phone, but it does not run. No error. It just doesn't run.
Smartflight said:
I am trying to do this HardSPL on my Topaz. After installing the enablerapinew.cab on the phone, I get this error when I try to do the automatic flash:
Please make sure the phone is still connected to the PC and is synchronized.
The phone is synced, and it's connected as well. What's wrong?
I copied the manual HardSPL file on the phone, but it does not run. No error. It just doesn't run.
Click to expand...
Click to collapse
is the radio on? it won't work in flight mode.
if that doesn't help, send us a ticket at http://support.htc-unlocks.com for more personal help
The radio is on, the battery is about 90% charged.
Guess I'll have to use that.
Is that NOT possible to flash only using the "update_to_251.zip" file?
I think we should use the enablerapinew.cab only when the above does not work. I am sure cmonex can give better answer here... before you create ticket
Thanks.
prabhat said:
Is that NOT possible to flash only using the "update_to_251.zip" file?
I think we should use the enablerapinew.cab only when the above does not work. I am sure cmonex can give better answer here... before you create ticket
Thanks.
Click to expand...
Click to collapse
that file will only work to update a device that already has Hard-SPL.
Related
This is my first ever Rom flash..
I have a HTC 3600i with WM6..and trying to flash to P3600_WM6_1.1_WWE_ADW_incl_RADIO
As i am trying to use RUU etc...when the PDA is connected to activesync, it shuts off as the RUU tries to update the new ROM....and afterwards I get the 260 error.
How do I stop the USB disconnection?
Or am I missing something important I didn't do?
Thank you...
Which OS are you using? Are you using Vista? If so, follow the instructions here.
I find sometimes my connection disconnects just before its about to update. To get around this I usually put the phone into bootloader mode first, and then run the RUU.
nchiang said:
This is my first ever Rom flash..
I have a HTC 3600i with WM6..and trying to flash to P3600_WM6_1.1_WWE_ADW_incl_RADIO
As i am trying to use RUU etc...when the PDA is connected to activesync, it shuts off as the RUU tries to update the new ROM....and afterwards I get the 260 error.
How do I stop the USB disconnection?
Or am I missing something important I didn't do?
Thank you...
Click to expand...
Click to collapse
Correct me if I'm wrong but I don't think flashing to the P3600i is possible for the moment. Read on here: http://forum.xda-developers.com/showthread.php?t=328147
tnyynt said:
Correct me if I'm wrong but I don't think flashing to the P3600i is possible for the moment. Read on here: http://forum.xda-developers.com/showthread.php?t=328147
Click to expand...
Click to collapse
I see, but it still doesn't explain why the usb connection disappear as I try to update using RUU...
I'm using XP, i also tried using the SD card method but I just see the three colours when I try to enter the bootloader..
thanks.....
So people around here sometimes get troubled with regular flashing that doesn't work anymore.
I'll explain my problem on this part:
I flashed to a new ROM just to find out that i didn't like the content so i wanted to flash back to TOUCH X.
I did the usual stuff to flash my phone with, Hardspl, then bootloader etc. etc.
PROBLEM!
Now all my phone seems to be doing is go into bootlader and start updating. However, after 3 seconds i get the message that the update is complete. My phone resets itself, and i found out that nothing has changed. I tried it a number of other times, without results.
Now my question is: is there any other way to do this, this is obviously not working!
post all your ideas here so other people can read this in case that they have the same problem!
Everytime you flash a ROM, you do not need to hardspl your device, only once...I would reformat your memory card,use a stock original rom and see if it will flash with that....usually the issue you are seeing is because the nbh file is not being read properly, make sure your nbh file is named correctly.I have had the issue earlier in my days where if I copied the nbh file through active sync something gets screwed in the transfer...used an external card reader and copied it to my memory card after formatting it and it went through....just some suggestions....Good Luck
Regards,
WC
didn't solve it at all.
More suggestions?
SyntheticDistortion said:
didn't solve it at all.
More suggestions?
Click to expand...
Click to collapse
seems to be your problem? ---> CLICK
Nope, didn't do anything..
Any other suggestions?
EDIT: Really a lot of thanks for anyone helping, i really would love to start flashing again!
grateful for the help arnt you..
try flashing the USB method, if it works its probably due to your memory card. (unless ur already using the usb method, then try the memory card method!)
How do i use the USB method exactly?
And really guys, thanks for all the feedback, maybe make this a sticky for future reference?
SyntheticDistortion said:
How do i use the USB method exactly?
And really guys, thanks for all the feedback, maybe make this a sticky for future reference?
Click to expand...
Click to collapse
well what you do is download the file attached to this post (it is available in one of the stickies but when i tried to download it, it failed so i zipped this one up for you)
extract the .exe within to where your nbh file is (not on xperia, on computer)
make sure there is no KOVSIMG.nbh on your memory card!
put your phone in bootloader (tricolour screen) and plug in via USB
run the custom_RUU.exe and follow the prompts pressing next etc.
you don't have to sync via activesync 1st like it says.
ignore the version number of the ROM just make sure your using the correct nbh and flash!
urm i think you should at least try to look at the stickies .........
this is very useful. i had problem flashing using micro sd so all my flashes are via usb.
http://forum.xda-developers.com/showthread.php?t=497511
That seemed to have done the trick people!
Thanks very much and keep up the good work!
Ok, i've tried everything that i've read in these threads, but am not having any luck.
I've got an HTC Breez (rom 1.13.251.2, radio 1.06.00.10, spp -2.05), and i'm trying to update it to WM6.1.
i've tried to use Hard SPLV7, which tells me that my phone needs to be application unlocked.
Then i tried to use AppUnlock-Check.zip (ApplicationUnlock.exe) to unlock it. But that tells me that my phone cannot be unlocked.
So, can someone please help me to prepare my phone to be rom updated? Please? This WM5.0 is not very nice!
thanks in advance for any help.
Ok, some progress. Based on this method i got the phone application unlocked.
However, when running the Hard-SPL-V7 it runs through until i give the last ok, then looks like it's running, then crashes. So no luck there.
Question: i am assuming that i need hard-spl prior to loading a new (WM6.1) onto the phone, correct?
thanks.
Hello out there. Is there no one that can lend me a hand? A hint?
He,,
You still need help?
Wich windows are you using? rom update only works with winXP...
You can search for updating using sdcards
Ah, hello!
I am using Win xp, and it did not work. Can you tell me exactly which version of Hardspl i should use?
thanks
You could try this one:
http://forum.xda-developers.com/showthread.php?t=552567
Tell me if you got hard SPL to work with this one. Follow the instructions on that page^^
There is also an update program wich automatically put your phone in sspl mode:
http://rapidshare.com/files/110014028/MTeoR-FutureShock-WM61-1.61.0004.0.rar
But,, if I where you I should first put Hard-SPL on your phone couse else you could brick your device.
Hello, and thanks for this. Problem is that the only SD card that i have is 4 gb, which does not work with the breeze!
Do you have any other way of making the 1st method work?
thanks for your help.
Download both files of my post above.,, In one of them you find the update program. In this folder you found an NBH file or something.., Delete this one and copy the NBH file of the other argive to this folder. I'm not sure if you have to rename it to the name of the NBH file you just deleted...
Connect your device over usb with active sync Then run the bat file.
Hmm, does not work! Any other suggestions?
Does active sync connect to your phone?
Wich application unlock tool did you use?
I am trying to HARDSPL my Tilt 2 and keeping getting not connected errors [264]. I have tried auto and manual. I placed the CAB file on the device and re-ran. I tried it in Win 7 and XP Mode. The deivce is connected, I can browse files thru the PC, Outlook is syncing, etc...
What will happen if I flash a new ROM without HARDSPL?
osu9400 said:
I am trying to HARDSPL my Tilt 2 and keeping getting not connected errors [264]. I have tried auto and manual. I placed the CAB file on the device and re-ran. I tried it in Win 7 and XP Mode. The deivce is connected, I can browse files thru the PC, Outlook is syncing, etc...
What will happen if I flash a new ROM without HARDSPL?
Click to expand...
Click to collapse
It won't flash at all.
Make sure you're running the file as administrator, other than that I have no idea what else you can try.
Hope this helps.
search for "enablerapinew.cab" and install
You need to post in the HardSPL thread, if you are having trouble with HardSPL
Thanks for the replies. I am making progress, but still not there.
I already had the enablerapinew.cab installed and I am using the manual flash method.
I "ran as admin" and it started the flash process. This time I got progress bars on-screen and on the device, but both stayed stuck at 0% until the flash utility timed out and walked me thru the recovery process.
I am using Windows Mobile Device Center 6.1.6965. It shows connected but drops the connection when the flash process starts. I assume this normal.
Any other suggestions.
osu9400 said:
Thanks for the replies. I am making progress, but still not there.
I already had the enablerapinew.cab installed and I am using the manual flash method.
I "ran as admin" and it started the flash process. This time I got progress bars on-screen and on the device, but both stayed stuck at 0% until the flash utility timed out and walked me thru the recovery process.
I am using Windows Mobile Device Center 6.1.6965. It shows connected but drops the connection when the flash process starts. I assume this normal.
Any other suggestions.
Click to expand...
Click to collapse
Hmm at least I helped a little, try updating the Device Centre to the newest, which I believe you acually.
A couple more things to try, one you need an active internet connection (can only assume you have this) and I found this on the HardSPL thread...
"if you get error msg for hard-spl program where it can not connect to device than use the cab that the hardspl program asks you to install on device: especially for tilt2 users.
Once you install the cab (on device), rerun the hard-spl program. DO NOT freak out as your device completely powers off. leave the usb cable plugged into device and computer and follow onscreen prompts."
Also make sure your radio is on (aka you have signal on your phone/it's not in airplane mode) and the basics such as the cable and the USB the device is plugged in to.
Once again, hope this helps
Problem soved. I published my answer in the Hard SPL thread.
http://forum.xda-developers.com/showthread.php?p=6518785#post6518785
Issue solved, Thread Closed
ok,i tried the sd-method.still nothing.it says no image file.i tried the pc method,it gives me a error message.i think pc method doesnt work because i dont have NET-framework.and i download the F****** net framework and i want to install it and it says error!im pissed right now!the phone is driving me crazy!so help me before i smash it and throw it in the wall
xperiauser132 said:
ok,i tried the sd-method.still nothing.it says no image file.i tried the pc method,it gives me a error message.i think pc method doesnt work because i dont have NET-framework.and i download the F****** net framework and i want to install it and it says error!im pissed right now!the phone is driving me crazy!so help me before i smash it and throw it in the wall
Click to expand...
Click to collapse
try to make manual synch then install netframework, for me SD method never worked, i always flash with pc method,
and last thing: I actually use Dynamics rom, is the best I tried with NRG and x826
also try deleting net framework from pc than relaunch for making it install on pc and on phone together (that worked for me)
i don't think flashing hardspl over stockspl via sdcard works. hardspl 0.72 used a special exe, not suitable for everything else.
flashing hardspl 0.78 over hardspl 0.72 via sd works fine. and no, stockspl 0.78 doesn't make it any harder, i got it back from service 2 times with it.
but i already told you, you need a fully working connection with activesync first for usb-flash to work. (device center from Vista onwards), you might need to search for usb-drivers for x1 first (which also allow the pc recognize the phone if you attach it in bootloader-mode).
iirc, after starting flash-process with winmo running, there was a popup on stockrom if you really want to let some exe reboot the phone (to enter bootloader).
yes you need to fully synchronize with a server or pc
server doesn't have to do anything with it.
and no, he doesn't need to do a full sync with pc. but he needs to be able to do that.
caliban2 said:
server doesn't have to do anything with it.
and no, he doesn't need to do a full sync with pc. but he needs to be able to do that.
Click to expand...
Click to collapse
Yes but usually I make a synch to be sure that its all good =)