Hello,
I read most of the guide but couldn't find certain answers there nor by search, but apologies if I missed them elsewhere.
1) I'm happy with my SGS, I always used stock ROMs and am now on 2.2.1. I'd like to get root access and leave the rest as it is, however.
Is there any way to get root access with the stock 2.2.1 ROM without switching to a completely different ROM (as said, I like the stock ROM and don't feel like changing the layout, features and all that come with a new ROM)?
I saw that superoneclick thread but apparently it didn't work for everyone and questions are usually not answered there if people run into trouble so I didn't dare that yet.
2) Still a bit confused about the 2 modes. Do I need recovery mode to work? Or will download mode do to flash (if I have to) and rescue/fix my phone if something goes wrong?
My 3 combo button never worked so I bought a JIG dongle on ebay which gets my phone into download mode at least, but I still have no recovery mode yet that's why I'm asking.
Thanks!
There's an app called Quick Boot which will allow you to get into recovery mode but you need to have phone rooted.
Note though that Froyo uses 3e and I've tried to use update zips, wont take without going down to 2e recovery.
Landorin said:
Hello,
I read most of the guide but couldn't find certain answers there nor by search, but apologies if I missed them elsewhere.
1) I'm happy with my SGS, I always used stock ROMs and am now on 2.2.1. I'd like to get root access and leave the rest as it is, however.
Is there any way to get root access with the stock 2.2.1 ROM without switching to a completely different ROM (as said, I like the stock ROM and don't feel like changing the layout, features and all that come with a new ROM)?
I saw that superoneclick thread but apparently it didn't work for everyone and questions are usually not answered there if people run into trouble so I didn't dare that yet.
2) Still a bit confused about the 2 modes. Do I need recovery mode to work? Or will download mode do to flash (if I have to) and rescue/fix my phone if something goes wrong?
My 3 combo button never worked so I bought a JIG dongle on ebay which gets my phone into download mode at least, but I still have no recovery mode yet that's why I'm asking.
Thanks!
Click to expand...
Click to collapse
Warning etc I take no resposibility if you break something etc
First of all fix your 3 button for recovery, there should be some guides around here.
1. Try that superoneclick you posted the link to. If it wont work it wont work... But it will.
2. Recovery you need only if you want to tinker with the rom a little more and to do nice stuffs like backup. Or for a recovery
Oh and I am on stock rom + custom kernel + another modem and happy with it.
First I was rooted and the rest was as it is and I rooted with the super one click root . Dont forget USB debugging on. Once you root though I think wont be long till you start customizing a little . Good start is a nice good custom kernel
If you want to stick with stock you could try these stock roms which come pre-rooted, zip-aligned and deodexed (making them smoother and allowing the application of themes).
http://forum.xda-developers.com/showthread.php?t=948790
To fix the three button combo have a read of this thread. The OP of this one is really helpful if you're not sure what to do. I had to do this and it was the most nerve racking thing i've done to my phone as if this screws up you'll be sending it for repair.
http://forum.xda-developers.com/showthread.php?t=821698
Thanks a lot to all of you for your answers!
Had my first successful flash today (3 button combo mode) and will now take a more in depth look at rooting etc.
So far, I feel more comfortable to try a rooted stock kernel maybe instead of superoneclick.
However, if I had to unroot for any reason, how can I do that if I flashed the kernel?
The way I understood about ROMs and Kernels is that ROMs already contain kernels. So flashing a stock ROM would get me back to a stock kernel and the phone would be unrooted again?
you can also just flash a kernel and root such as cfroot or speedmod..
Jamalsid said:
If you want to stick with stock you could try these stock roms which come pre-rooted, zip-aligned and deodexed (making them smoother and allowing the application of themes).
http://forum.xda-developers.com/showthread.php?t=948790
To fix the three button combo have a read of this thread. The OP of this one is really helpful if you're not sure what to do. I had to do this and it was the most nerve racking thing i've done to my phone as if this screws up you'll be sending it for repair.
http://forum.xda-developers.com/showthread.php?t=821698
Click to expand...
Click to collapse
To un-root you can just flash a stock ROM (look in the general section to find them).
If you like stock ROMS then like the person above stated you can just flash a pure stock ROM then flash a new kernel (i.e. speedmod, voodoo etc.).
Good to hear the 3-button flash worked for you, now it is very difficult to brick your phone as you should always have the 3-button download mode which enables flashing with Odin.
Just be careful when picking a stock ROM, especially if its new, to check if it includes a new bootloader!!
Thanks all again!
and good on you for being sensible enough to get a jig.....best fiver I spent in ages. Every time I flashed back to an early stock it trashed my bootloader.
no worries about flashing now
Landorin said:
Hello,
I read most of the guide but couldn't find certain answers there nor by search, but apologies if I missed them elsewhere.
1) I'm happy with my SGS, I always used stock ROMs and am now on 2.2.1. I'd like to get root access and leave the rest as it is, however.
Is there any way to get root access with the stock 2.2.1 ROM without switching to a completely different ROM (as said, I like the stock ROM and don't feel like changing the layout, features and all that come with a new ROM)?
I saw that superoneclick thread but apparently it didn't work for everyone and questions are usually not answered there if people run into trouble so I didn't dare that yet.
2) Still a bit confused about the 2 modes. Do I need recovery mode to work? Or will download mode do to flash (if I have to) and rescue/fix my phone if something goes wrong?
My 3 combo button never worked so I bought a JIG dongle on ebay which gets my phone into download mode at least, but I still have no recovery mode yet that's why I'm asking.
Thanks!
Click to expand...
Click to collapse
Mate if you just want a simple to apply root access I would just use Z4root... its not used so much anymore but it works well and can be installed by just installing the app(can't be obtained from android market, internet only)..
Link: http://forum.xda-developers.com/showthread.php?t=833953
otherwise you can just use Odin to flash CF-Root ( I do this all the time on stock firmware and works perfectly every time).
Link: http://forum.xda-developers.com/showthread.php?t=788108
mossy1963 said:
and good on you for being sensible enough to get a jig.....best fiver I spent in ages. Every time I flashed back to an early stock it trashed my bootloader.
no worries about flashing now
Click to expand...
Click to collapse
Exactly my thought.
Bluephantom3 said:
Mate if you just want a simple to apply root access I would just use Z4root.
[...]
otherwise you can just use Odin to flash CF-Root ( I do this all the time on stock firmware and works perfectly every time).
Link: http://forum.xda-developers.com/showthread.php?t=788108
Click to expand...
Click to collapse
I used z4root on 2.2 but afaik z4root no longer works with 2.2.1.
I did flash the CF Kernel now and quite happy with it so far.
By the way, is it a bad idea trying to flash with Odin if the phone is connected via a USB hub instead of connecting it to the direct usb port? Each flashing failed on the 1st attempt (worked on the 2nd), no matter what I flashed so far. Some searching here indicates a hub is not recommended.
If that's the case, why is that not mentioned in all those read-me-first guides (or maybe I missed it somewhere)? Not every first-flash user will have a JIG at hand.
You're right you should have the USB cable plugged into a USB port on the motherboard (not a port in your pc case or a hub) for the least chance of flash failure.
Not sure why though tbh, I think it may have something to do with the Samsung USB drivers that get installed with Kies being a bit flaky.
Related
Good evening,
I usually use Windows Mobile devices so very new to Android, but my girlfriend has recently purchased a Galaxy S from Three. I have tried looking in the FAQ's but there is that much information I am feeling a little confused and dont want to go bricking a £380 phone.
Anyway, the phone has Three's customisation on it and it's not good to put it simply and I am wanting to return the phone to stock ROM or possibly a custom ROM.
The phone is currently running Android 2.2 as it updated when we first got it using the Samsung Klies.
Please can some of you offer advise on where to start with this as I presume I will need a backup of the ROM currently installed.
I've tested the 3 button download mode and that works fine.
Many thanks.
Well with the 3br you can pretty much do anything I would probably flash different kernel which has 2e recovery either speedmod or cf root then install rom manager and from within that app install cwm this enables you to flash custom roms preferably jpy 2.2.1 or just use odin to flash roms that are available from samfirmware again id recommend jpy.
It is worth reading everything you can before you start rather than posting in panic if it goes wrong. You can also break the three button as many have discovered lately to their loss. It is always a risk. So make sure you know wha your doing before you start and remember her warranty will probably be voided by doing any flash.
Got my phone (AT&T Captivate, firmware 2.1-update1 version JH7, kernel 2.6.29, build eclair.UCJH7) on december 28 from a AT&T store (it even came with a pic taken december 20 ) and I've already been able to boot into download mode (power off, hold volume keys then plug usb) and into that menu used to install packages (power off, hold volume keys then power on). Guess my hardware and firmware are ok, so I may be able to recover my phone by myself in case things go south.
I've been doing my homework lately (been reading stickys, tutorials and faqs for 10 days) but I'm still confused about some procedures. I'm not going to list everything I've read here, but I would like someone to correct me if I've learnt wrong. I don't really need the easiest methods, I want to understand the options available and to choose the best ones (aka the hardest path).
First of all, it seems I need to root my phone in order to be able to create backups, carrier-unlock it and flash custom roms. But it doesn't make much sense to me, since rooting it seem to be enough to prevent it from receiving FOTA updates - and I want to make the most comprehensive backup possible, in such a way I could restore my phone to 'factory condition' if needed.
Second, I realize there are many ways, programs and guides to root the phone - the most famous ones, One-Click root/unroot and z4root, seem to be listed in the wiki (http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897), but there is also CLShortFuse's One-Click Root and Allow Non-Market Apps, which sounds interesting but I don't know if it is undo-able. So there are different ways to root the phone, but there is little to none information on what's the difference between these methods, which is 'better' and what difference does it make if I root it permanently or by some reversible method. Does it affect performance? How each of them work? I have no clue.
The mess gets even greater when it comes to creating backups. People mention different programs to make these backups (clockwork recovery, titanium backup) but I don't understand if they back up different parts of the phone. Some even seem to change the bootloader of the phone - shouldn't it be backed up prior to any modification? Do I flash these backups using Odin? Which programs should I use to have a full backup? Is there anything left I should back up manually?
I'll quit talking for now because I've already written a lot and I still have many questions; if I write all of them at once, no one will ever have the patience to read them.
Erk, a long post deserves a long answer
So first off, il tell you about recovering your phone. Since you just got it, you can go back to the store and play dumb to get a new one in case anything goes wrong. You can also use the 3 button combos to get into download mode and use odins back to stock to get back to your original 2.1 eclair firmware . To do that you would need to get into download mode. Now there are a couple ways to do this, and i can only explain two since ive actually used two. (Well 3 actually, but il get to the third after these 2)
The first method is using the 3 button combo which you should already know. The second method is using adb commands such as (adb shell, adb reboot download, adb reboot recovery, adb devices). The third way is building a jig. Thats basically connecting 301k 1/4 watt worth of resistors together and placing them on pin 4 and 5 on your micro usb slot. You can read more about that on the tutorial on how to build a jig for your phone.
To restore to your factory setting, odin's one click back to stock thing should do the job. It simple installs the stock 2.1 eclair all over again (without the root).
To root your phone, any method from the wiki should work. None of them are really "better" :S, they all do the same job and give you super user permissions. None of them root your permanently since you can always go back to stock using Odin's... It does not really affect performance, not to any extent i have noticed :S, and unfortunately, i dont really know how it works.
As for creating backups, Titanium Backup is the best solution. Whether you have the few extra bucks to spend for the premium one or simply want to use the free one, its one of the best tools out there. I personally use it and its one of the best. It backs up all the data (except for my text messages). It creates a folder on your internal memory which you can just copy to your desktop. When the time comes that you need to restore your backup, just copy the folder back into your internal memory, load up titanium backup. Restore it and voila .
I think ive answered everything, if ive missed anything, let me know
Edit : Forgot to mention this . If your truly interested in customization. Custom roms are the best there is a howto in the themes and apps section on how to install it. It comes pre-rooted (if that is the word to use :S) and theyre much better than the stock firmware. Im currently using serendipity v3.0 (flashed it yesterday)
supaphreek, guess I'll have to thank you twice: once for reading my enormous post, and again for you supacompleteanswer.
I'm being paranoid with recovery because I actually bought the phone in the US then came back to my country (Brazil), so I'm a few thousand miles away from the simple lets-return-this-thing solution.
From everything I've read, I believe the most instructive were the wiki at http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897 , the FAQ at http://forum.xda-developers.com/showthread.php?t=858765 , the PDF guide from user nbs11 at http://forum.xda-developers.com/showthread.php?t=761819 and the wiki at http://www.capfaq.com/w/FAQ. These contain most of the info a newbie user would ever need and I'd definitely recommend them to any newbie user who happen to be reading this. And for everyone afraid of bricking, it's a tremendous relief to know pretty much any mess you do can be reverted using download mode and Odin, so the first thing to test is if you can get into download mode using one of the ways described by our buddy supaphreek.
On the rooting matter, I found no discussion at all about which is better, so they should be pretty similar (though I have no idea which is the oldest version, I'd assume the recent ones might be a little improved). There is some discussion on what's the better lagfix and many of the cooked ROMs already come with some lagfix installed, but this is another story...
Once I get my phone rooted, it seems to be trivial to carrier-unlock it. There's even an app on android market for this, so I won't even need sideloading. Since all this procedure does is just give me a number, there's hardly any difference among all the unlocking procedures out there.
For the backup, I'll still do it using both titanium and clockwork, as suggested by nbs11 on the pdf I've linked on this post. Better safe than sorry, right?
And yes, I'm truly interested in customization and I'll go deep down that path, I'm just packing up my head with some knowledge to avoid being desperate if things eventually go fubar.
As a last question, is there somewhere I can get 1-click Odin with my exact firmware version? (2.1-update1, I897UCJH7, Kernel 2.6.29 [email protected] #2, build eclair.ucjh7) And how important is it to get the exact same firmware?
As I've done my research, I found 1-click odin with JF6 here: http://forum.xda-developers.com/showthread.php?t=731989
I've also found the 'standalone' I897UCJH7 on this topic (where this guy even flashed succesfully his phone using old JH2 firmware without problems, so finding the exact firmware version might not be the greatest issue): http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36 but this process is a bit more complicated and uses regular Odin and clockwork recovery. Nonetheless, from what I've understood, I can still use any old version of odin to flash JF6 then use my own clockwork backup, right?
Hmm, unfortunately, im not sure if there is a specific Odin for that firmware :S. However what you can do is use one that reverts you to any stock version, and then flash the version you want through clockwork mod
I'll do that. Thanks again!
Also if you one click to stock, you can OTA update to the most recent firnware. I suggest titanium premium if you are going to flash a lot of custom roms, it is a lot faster to restore and also syncs with dropbox
Sent from my SAMSUNG-SGH-I897 using XDA App
Be careful trying to flash with odin. Some newer builds get instabrick flashing back to jf6 and must go with jh2 or newer.
So, you may want to invest a few bucks in a jig setup before blindly using odin.
Thanks for the tip, sixstringsg.
Newter55, as my phone is brand new I believe I may have one of these insta-brickable devices. If I happen to try flashing it with a recent rom, does it get recoverably bricked (fixed by flashing an older rom), or I'm left with a $500 paperweight?
You just need to use the correct firmware version of odin if you manage to get in trouble. Many people flash rom over rom, including myself, but it is highly likely that at some point you will need odin if you are flashing roms so it is best to ensure that you have that set up first. Look for the odin thread by c3popl (sp?) in development forum and you should find what you need. Read through that and look for others with your base firmware. Or look through q&a at the "help I bricked" threads . On my phone and posting links is a pita or I would make it easy for you.
If your phone came with JH7, follow this guide:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
If you use one of the Odin one-clicks and brick your phone, you'll need a USB jig to recover.
You guys are awesome. Thank you newter55 and GGXtreme for this info! I hope I'll never need it, but I'll buy a cable and make a jig.
The news: I've rooted my phone using One Click Root / Unroot by TGA_Gunnman (for the record: it worked with my JH7 Captivate bought in 28 dec). Once I booted windows, installed dotnet framework 4 and the samsung drivers (easy too, but a pita), rooting was easy and failproof. However, someone using linux might find it easier to just download 1-click root, find the root.zip file in there, rename it as update.zip, put the zip in the internal sdcard, boot the phone holding the volume buttons and then 'install packages'. This way there will be no need to fight Wine nor install anything nor look for a windows computer with admin privileges.
Also unlocked my phone using SGS Unlock Tool, available in the Android Market. The unrooted option won't work, but once rooted it worked like a champ. Next step: I'll do the backups, and then... start messing up my new toy!
As you are about to see, I'm new to this.
I have been attempting to root my Captivate. I have tried Galaxy One Click Root and Super One Click 1.7, among others.
My phone won't enter recovery mode. I have tried to install z4root, which the phone blocks. I've tried using sideload wonder machine, which doesn't work either.
I downgraded to 2.1....nothing. Reloaded 2.2....nothing.
Any advice would be helpful at this point, and please be specific, as I am slightly retarded.
It its rumored that Odin one click to jf 6 will actually get rid if the recovery/ download modes, maybe try flashing a cognition ROM
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
ryanmahan said:
It its rumored that Odin one click to jf 6 will actually get rid if the recovery/ download modes, maybe try flashing a cognition ROM
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
That's not a rumor, it's a fact. Does not happen with all models.
What about full odin to jf6? I personally like to use odin every so often to master clear.
It would explain why superone click wouldnt root my phone lst time i master cleared, too. Ended up installing cwm and flashing straight to rom(which took care of rooting and 3rd party apps)
mrhaley30705 said:
What about full odin to jf6? I personally like to use odin every so often to master clear.
It would explain why superone click wouldnt root my phone lst time i master cleared, too. Ended up installing cwm and flashing straight to rom(which took care of rooting and 3rd party apps)
Click to expand...
Click to collapse
As I said, I'm slightly retarded. Do you know of a forum with instructions for doing this? Everything else I've tried has just caused a face to appear on my phone's screen laughing at me.
When you use super one click, did you enable usb debugging?
Sent from a place my wife doesn't know about
The captivate is actually an extremely easy root process...
Download this file update.zip
Put it on your internal SD card (internal Memory) not your SD card you can remove
Turn off your phone
Once off hold both volume up and down and hold power until you see the AT&T boot screen then let go of all 3 buttons. You should see recovery mode soon. Select Reinstall Packages, congratulations you are now rooted.
Is that the modded cwm? I think he said he was on 2.2. Regular cwm won't work with froyo(signature verification errors). There is a modded one somewhere on this site that either replaces 3e, our fixed sig on cwm.
Sent from a place my wife doesn't know about
I think he downgraded to 2.1 again which is what you'll need to be on to use the method I described.
jayjr1105 said:
I think he downgraded to 2.1 again which is what you'll need to be on to use the method I described.
Click to expand...
Click to collapse
I'm running 2.2
1-Downloaded and installed file update.zip to internal sd. Turned off phone. Tried to enter recovery mode. Got blank screen, att screen, blank screen, att screen, blank screen, etc etc.
2-Tried to install z4root. Blocked by phone. Tried to use sideload wonder machine, which can't detect the phone (in usb debugging mode and mass storage (tried both))
3-Tried Super One Click, which ran but did nothing.
4-Flashed to 2.1 and factory reset. Tried (2) again. Failed. Tried 1-3. Failed.
5-Flashed to a different version of 2.2. Started over. Failed.
I've been using some of the mobile tech videos, but everytime I get to the "Eureka!" phase, my phone just laughs at me.
use odin full version to flash speedmod kernel on 2.2, i even do this on 2.1, but on 2.1 you need the .zip file on the sdcard before you start because the phone will not boot with a 2.2 kernel, only enter recovery.
once on speed mod kernel you can either root and flash a kernel for att roms or flash a new rom without the need to root, the new rom will be rooted.
if you are on 2.2 you will need a computer one way or another, flashing back to stock can be a pain for those with the 3 button problem and it is way more time consuming than flashing a kernel, i have never used the tools out there but i don't know of an easier way than flashing a kernel via odin, especially if you intend to flash a 3rd party rom. also any time you flash a sbl.bin or boot.bin can be a dangerous situation. bad flashes that break the boot loaders aren't common but it causes enough "omg i bricked" threads to keep me from recommending it. there is a odin one click with a 3 button fix, if you use that once it will be fixed untill you flash a rom with odin that changes the bootloaders again. im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
you must not have the right drivers installed.
2.2 cannot be rooted by using an update.zip....you will need to get your drivers working and adb seeing the device....
sharp1114 said:
I'm running 2.2
1-Downloaded and installed file update.zip to internal sd. Turned off phone. Tried to enter recovery mode. Got blank screen, att screen, blank screen, att screen, blank screen, etc etc.
2-Tried to install z4root. Blocked by phone. Tried to use sideload wonder machine, which can't detect the phone (in usb debugging mode and mass storage (tried both))
3-Tried Super One Click, which ran but did nothing.
4-Flashed to 2.1 and factory reset. Tried (2) again. Failed. Tried 1-3. Failed.
5-Flashed to a different version of 2.2. Started over. Failed.
I've been using some of the mobile tech videos, but everytime I get to the "Eureka!" phase, my phone just laughs at me.
Click to expand...
Click to collapse
sounds like you need the 3button fix first. there is an odin stock rom+3button fix, it should take you to 2.1 but you will get recovery mode. if that fixes the recovery mode 3-button combo and the phone boots you can put the rom of your choice on the sd card, then odin flash speedmod kernel and flash the new rom, warning the phone doesn't boot a 2.1 rom with speedmod kernel, i only do this as a faster way to get into cwm recovery, only do that if you intend to flash a rooted rom from 2.1.
Dani897 said:
use odin full version to flash speedmod kernel on 2.2, i even do this on 2.1, but on 2.1 you need the .zip file on the sdcard before you start because the phone will not boot with a 2.2 kernel, only enter recovery.
once on speed mod kernel you can either root and flash a kernel for att roms or flash a new rom without the need to root, the new rom will be rooted.
if you are on 2.2 you will need a computer one way or another, flashing back to stock can be a pain for those with the 3 button problem and it is way more time consuming than flashing a kernel, i have never used the tools out there but i don't know of an easier way than flashing a kernel via odin, especially if you intend to flash a 3rd party rom. also any time you flash a sbl.bin or boot.bin can be a dangerous situation. bad flashes that break the boot loaders aren't common but it causes enough "omg i bricked" threads to keep me from recommending it. there is a odin one click with a 3 button fix, if you use that once it will be fixed untill you flash a rom with odin that changes the bootloaders again. im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
Click to expand...
Click to collapse
Do you have a suggestion for a stable rom? I don't want to get to the point where I've got it working and throw a terrible third party on it. I'm just looking for device speed and controll over all apps, especially bloatware.
all of the available roms are stable. to be honest TiBu will remove bloat if you want it to.
Try them all and see which one you like. Pretty much all of the custom roms are better than stock. If you like to stay near stock but run more optimized, see Cognition. Otherwise see which one you like more. It's not a hard process if you read up on it.
sharp1114 said:
Do you have a suggestion for a stable rom? I don't want to get to the point where I've got it working and throw a terrible third party on it. I'm just looking for device speed and controll over all apps, especially bloatware.
Click to expand...
Click to collapse
it is hard to go wrong with cognition which is a stock rom with some mods and bloat removed and tethering enabled, that will have the proper kernel and modem for the captivate which for me has great call quality, also the disadvantages of not having hsupa are overblown.
there is also andromeda which is the rom from the armani captivate and is well polished and complete, has some of the more useful samsung apps. this can be used with a 2.2.1 kernel ported from the i9000 for a slight speed boost (shows in benchmarks, may not be detectable in user experience) this has hsupa and is designed for the captivate
i9000 ports are newer 2.2.1 versions and all of the features work now so you may want a newer firmware version from one of those..
there are many 2.2.1 i9000 roms that are fully functional. that is more a matter of feature set and theme preference it is hard to say one is better than the other. id say for stable the speedmod kernel is about the best on an i9000 port, for experimenting with overclock or undervolt i hear that the kernel with paragon is awesome.
now it is odd that you say you flashed a different version of 2.2 but cant get into recovery, was that in odin? can you get download without adb commands?
Dani897 said:
im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
Click to expand...
Click to collapse
Use this method to flash back to stock. Supposed to be much safer that doesn't mess with the bootloader files. I have been using it for about 3 weeks now to flash back to stock. You CAN however still use the one click odin to master clear once you have flashed back to stock.
Back on topic... I would flash back to 2.1 using the above method and master clear to start fresh with this issue. Once that is done look for mobiletechvideo's 3 button fix video on youtube. But even if you have 3 button issues the Galaxy S one click root program should still get you into recovery. It doesn't always succeed in copying the update.zip file to the internal SD card but you can do that manually and just use the program solely to get into recovery. Make sure you have USB debugging on. After the stock flash and master clear it is off by default and samsung kies is on. You might want to invest in a Jig also since you have 3 button issues, it may save you hide someday.
As far as a good rom goes. Really all the 2.2.1 roms are pretty stable and fast. I'm currently using Continuum 4 with the paragon kernel and it floats and sips battery. If you like the stock look you can use cognition. If you like the green themed gingerbread look you can use Phoenix, Serendipity, Firefly, or Paragon which is my personal fav but hasn't been updated in a month.
Anyways good luck. I'm sure you'll figure it out.
oops, got double posted somehow
Thanks for all your advice and help. I finally got it rooted.
I've tried Cognition 4.3 and Paragon, both of which I liked. I like the appearance of Paragon, but the optimization just doesn't seem to be there. Cognition is great for customization, but I the appearance is just to 'stockish' for me, if that makes sense. Something in between would be nice. (Ideas?)
I plan to try Phoenix Unleashed, but i can't get it to download.
The reason why the programs are having a hard time seeing your cappy is because you need the Serial COM driver available only by installing Samsumg's software: Kies Mini... don't run the program just install it. Once you do this Odin and the Wonder Root program can see the phone. I had this issue.
Hi guys.
I am not a n00b per se, i have done my fair share of Desire rooting and things. Now that my friend asked me to do his Galaxy s for him i got lost. He have JV5 which i cannot find on CF-ROOT method. Any help there maybe. I got it rooted, with one-click-root. Now i would like to get a CWRecovery and flash from there. As much as in Desire it was quite easy, here i get lost which kernels i can use? If i have a UK Mobile with 3 branding which kernels i can use to do not loose my data and calls. I know it is related to the modem version, which as i mentioned is jv5. Again could not find it.
So in few easy points:
1.) would like to get CWRecovery on my friends mobile.
2.) would like to know which kernels would be suitable for me (JV5 user)
I guess once i know this everything else would be easy.
Thank you all kindly for looking and helping.
Regards
Kirior
Download ODIN, then grab the latest firmware from here for your country
http://www.sammobile.com. You will need to register, buts its well worth it.
Once you have got your phone into download mode (press HOME, VOL DOWN AND POWER) together then it will be seen by ODIN.
ODIN instructions here http://forum.xda-developers.com/showthread.php?t=1259240
Once flashed the rom, then flash a kernel, I use this one:-http://forum.xda-developers.com/showthread.php?t=1112908
Then boot, then power off reboot holding down HOME, VOL UP AND POWER to access cwm, then you can install any custom rom from sdcard.
MAke sure you backup from cwm first tho!
thx my man, will do. Seems easy and very straight forward. I guess no one could go wrong with this . THX Again.
If you still need any help, we're here for you
Okay first of all, I would like to apologize if this is being posted in the wrong forum, or if I am upsetting anybody by posting this. I have searched all over for a couple days trying to figure this out. This is my last resort, and I'm hoping you guys can help. All of your time and understanding is much appreciated!
So a little background. About a week ago, I rooted my AT&T Captivate 2.2(build number 1012 if that helps) using Superoneclick, and then flashed CM7.1 using clockworkmod. I was not satisfied with CM7.1(terrible battery for me, other various reasons). I then downloaded MIUI (not sure which version, the one available on the premium version of clockworkmod) and flashed it using clockworkmod. This started with the cm bootscreen, and then went to an MIUI bootscreen that played a little tune. The miui screen looped, and it would not go past this.
After rebooting and running into the same thing, I went to f\attempt to find a solution. I thought I backed up my rom, but it had been erased (issue with the external sd I think). I used an odin one click I found on here, but this odin one click brought me back to eclair 2.1, instead of 2.2. Up until now, I could get into both download and recovery mode using the three button method, and now I can't. I am not sure what to do exactly. I have read about getting it into download mode using adb, but I'm not sure if that would work in my situation, and I'm not too educated on adb or android sdk. I stayed up almost all night last night, and now have researched most of today, not making much progress.
Thanks again for your time!
Just to clarify have you used all button methods in order to try to get into download mode. Seems as though flashing bootloaders may have f'ed up you combos. I have a couple suggestions. I'll edit my post as I find the urls to post for you
Stock GB ROM you should be using -- http://www.mediafire.com/?05nemq5yyn5fuqf, this one has bootloaders, but preferably you should use stock odin roms that don't mess with the BL's (after this of course, since yours are messed up right now).
Now of course this depends upon you getting into download mode. If you can use ROMmanager (btw, I don't recommend you download your roms from rommanager, as that will not always be the most up to date and may not be the one for you) to get into recovery mode, then from there go to advanced then reboot download. However some kernels do not support this. Try the cable methods before trying this method.
First of all, I appreciate your help Mikel.canovas. I have used all the button methods. I can no longer get into recovery or download. (Romtoolbox enables me to get into recovery(2E), but not download). I now have root access, but am not able to sideload apps, and apparently rommanager free isn't available on the market. I did buy rommanager premium, but unfortunately now that I basically reset my phone, it doesn't show up as bought (known issue, apparently not resolved?), and even after I bought it again, it says I need the free version to even use the premium version.
Should I go through the process to be able to sideload apps? Or will romtoolbox do the trick? Rom toolbox gives me the option to install a rom from my sd card. Should I use that, and select the GB ROM you provided? I'm not sure I understood exactly how you want me to get that GB ROM onto my phone.
What I want to eventually have is either MIUI or rom fasty on my phone. If possible, could you give me some steps on how to reach that goal?
Thanks again for your time. Eclair on the captivate is not pleasant, especially since I had a taste of CM.
Well first off I highly recommend Mosaic over CM or Fasty, solely because of performance and battery life. However that is all subjective.
Ah since you're rom is sending to 2E recovery, you're not rooted with cwm. You need to flash another kernel that supports this. Afterwards, If you can get into CWM, I recommend putting CM onto your sdcard and flashing from there. After booting into CM hold down the power button, press reboot, choose reboot download. See if that works. If not, does adb reboot download work for you? If not again, I recommend trying another USB port, reinstalling drivers, trying different button combos. I've had issues getting into download mode in the past and, trust me, it is VERY frustrating.
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
korockinout13 said:
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
Click to expand...
Click to collapse
Or download SGS Kernel Flasher from the market. You can then flash kernels with the app. without having to go into download mode. Very handy.
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If nobody beats me to it, I will post you some links tomorrow when I'm on my laptop.
Oh, and miui won't really give you better battery life than CM7. It basically is CM7 with a different UI. I loved CM7 a ton, so if you are having issues with it, let me know! With the right kernel and other settings, battery life is pretty decent, as long as you charge nightly.
Sent from my ICS i897 Captivate
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Alright, thank you, I will be checking back tomorrow.
Eventually what I want is to have the working 3 button combos again for both download and recovery mode, and either the miui, mosaic or rom fasty on my phone.
Easy flash GB BL's and you won't have to worry about 3 button problems!
If you didnt do a Master Clear, now would be the time. Make sure you back up anything you want to keep. MC will erase EVERYTHING on your internal SD
Remove your Micro SD, and your SIM
Download:
OneClick Root
SideLoadWonderMachine This also has CWM, 3ButtonFix and ROM Manager in the zip
Make sure you have Debugging enabled
Connect to your PC
Run One Click Root, and follow the instructions, reboot
Run Sideload Wonder Machine and direct it to install ROM Manager
Copy the update.zip(CWM) and 3Button Fix to your phone
Open ROM manager and "reboot to recovery"
You'll go thru the boot twice to get to CWM
In CWM install the 3 Button Fix
I usually pop out the battery and check it before I put the ROM in.
VERY IMPORTANT!!!!! DO NOT TRY TO USE THE 3ButtonFix while you have a GB ROM installed you WILL brick your phone. It only works on 2.1, and 2.2 ROM's
using this one click package I now am able to manually enter download and recovery :
http://forum.xda-developers.com/showthread.php?t=1129821
However, The recovery is still 2e..
kangi26 said:
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Click to expand...
Click to collapse
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
wwcjr91 said:
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
Click to expand...
Click to collapse
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
kangi26 said:
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
Click to expand...
Click to collapse
Trying to fix my buddys cappy. Its rooted on T-Mobile and running stock 2.1 rom. I'm not a Samsung guy so how do I get cwm and a 2.3 rom? The build number is ECLAIR.UCJH7
Sent from my Incredible 2 using xda premium
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Post #3 has the "leaked" KK4 (Been confirmed to be the same as official).
4-2ndtwin said:
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Click to expand...
Click to collapse
Since its already rooted do I need a computer?
Sent from my Incredible 2 using xda premium
Yep. Because these are Odin or Heimdall One Clicks.
You can't just flash to a GB firmware/rom from Eclair/Froyo without using Odin or Heimdall to at least get the Gb Bootloaders. You cannot just go through CWM recovery unless u already have the GB Bootloaders.
Of course u can get it all through mini Kies, the official GB 2.3.5 KK4 update that is.