So since I've flashed my phone from firefly 2.4 I've been getting limited service at times with my phone. I've also tried a couple different modems as well and I am still getting the same thing.
I always do a flash to stock with a master clear before doing anything. I'm not sure what's causing it, but it's rather annoying. Also if I go into airplane mode and come out of it, it tells me there is no sim card and to install and reboot. I'm currently running firefly 2.6 with suckerpunch voodoo. Any thoughts and/or help would be greatly appreciated!
Aron1980 said:
So since I've flashed my phone from firefly 2.4 I've been getting limited service at times with my phone. I've also tried a couple different modems as well and I am still getting the same thing.
I always do a flash to stock with a master clear before doing anything. I'm not sure what's causing it, but it's rather annoying. Also if I go into airplane mode and come out of it, it tells me there is no sim card and to install and reboot. I'm currently running firefly 2.6 with suckerpunch voodoo. Any thoughts and/or help would be greatly appreciated!
Click to expand...
Click to collapse
my thoughts AND help: why do this to yourself? flash a different ROM. you might like it better and get better service. plus its fun
Sent from my SAMSUNG-SGH-I897 using XDA App
Different modem?
Aron1980 said:
I've also tried a couple different modems as well and I am still getting the same thing.
Click to expand...
Click to collapse
I'd try some more modems. I've tried several, and some I get really good service, and some crap. Just have to try them.
Here's a development thread that has a list (and links) of a LOT of different modems: http://forum.xda-developers.com/showthread.php?t=876391
rjblack11 said:
my thoughts AND help: why do this to yourself? flash a different ROM. you might like it better and get better service. plus its fun
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Completely agree.if you are having problems try a whole new rom out you may have great results
Sent from my SAMSUNG-SGH-I897 using XDA App
Use sgs tools secret codes go to band selection and make sure 1900 band is disabled.
Related
Well I just flashed over to CM 6.2 Extreamly Blue and I noticed a few things....
My reception seems to constantly go from Full, to none, then Back to full, all the while switching between 3g and 1x. But only in my house. My mom has a non rooted htc hero with the same PRL and her service follows the same pattern but it doesnt drain her battery like it does mine.
Any suggestions of what to do?
mine does that sometimes to on stable 6.1 but it don't affect my battery
sent from my Cyanoginger Mod Hero
Try going to the latest rooted 2.1 sense rom and updating your prl and profile a few times. Also you can try flashing a diff radio I use a Verizon radio because it gives me better service where I live. And lastly, the service bars on aosp/cm6 roms NEVER show correct signal anyways.
Sent from my HERO200 using Tapatalk
dirkyd3rk said:
Try going to the latest rooted 2.1 sense rom and updating your prl and profile a few times. Also you can try flashing a diff radio I use a Verizon radio because it gives me better service where I live. And lastly, the service bars on aosp/cm6 roms NEVER show correcr signal anyways.
Sent from my HERO200 using Tapatalk
Click to expand...
Click to collapse
How do I flash a different radio? I know for a FACT that Verizon provides better service where I live. Also, once I do this, is it reversible once I do this?
Second..... Can I flash from 6.2 down to 6.1 WITHOUT wiping? Or would it best to go to my backed up 2.1 update my prl then do a fresh flash to 6.1.
s2vash said:
How do I flash a different radio? I know for a FACT that Verizon provides better service where I live. Also, once I do this, is it reversible once I do this?
Second..... Can I flash from 6.2 down to 6.1 WITHOUT wiping? Or would it best to go to my backed up 2.1 update my prl then do a fresh flash to 6.1.
Click to expand...
Click to collapse
For a fact verizon has better signal in my area as well. Lets start by saying people flash radios because they can provide different signal and or battery boost. You have to try diff radios to see how results go I have about 5 radios on my sdcard and i gave them about a day of use to test each. One way to check is to go to cm settings and select user interface, then status bar and from there check show dbm(signal strength) and hide the signal bars. Coverage is so bad in my home but the desire radio jumps my home signal from -110dbm to about -76dbm which is really good compared to 110. Anything over -90dbm isnt really good coverage. You can flash these radios from any rom just need to be rooted. BE really careful though i have a cdma hero which means cmda radios only. If you flash a radio from a gsm phone/hero you WILL BRICK YOUR DEVICE. You can do this from a sense rom if you want but im just on cm6.1 stable. And to answer your last question, it is very reversible; you can flash radio after radio like I have done but once again just be careful not to flash any gsm radios. Hope this helps man.
Heres the radio i use, i recommend for best results give each radio about a day
http://geekfor.me/hero/radios/baseband-232401109/
This is how to flash a radio
http://geekfor.me/faq/flash-radio/
That site has a handful of cdma radios that would work on your cdma hero just browse around. Theres also a new radio thats hanging around one of these threads (.29 radio) but it doesnt help much cause coverage sucks like the (.27) stock radio. To check which radio you are on just go to settings then about phone, then it says it under BASEBAND version.
The list of known radios/basebands:
1.04.01.09.21 (old 1.5)
2.32.40.11.09 (eris/desire)
2.41.04.02.02
2.42.00.03.10
2.42.01.04.27 (2.1 ruu radio)
2.42.02.10.29 (newest sprint radio)
Flashing a Verizon radio wont effect your PRL?
Thanks
Not trying to Highjack, just getting more info into the thread
cordell12 said:
Flashing a Verizon radio wont effect your PRL?
Thanks
Not trying to Highjack, just getting more info into the thread
Click to expand...
Click to collapse
Nah your cool man, umm typically flashing a radio plays along with your PRL, some people say certain radios dont play nice with their PRL, but it has never happen to me(if it does just go to a 2.1 sense rom and try to update it with your profile and should be fine). Your PRL will remain the same; though ive been on many PRL'S and diff radios and never had any issues what so ever. As long as you are up to date with the latest PRL then your phone wont go crazy and be stuck in roaming mode lol. Some people create their own PRL's and put them in and etc. But your PRL isnt changed, just radio man if thats what your asking im kind of half asleep.
dirkyd3rk said:
Nah your cool man, umm typically flashing a radio plays along with your PRL, some people say certain radios dont play nice with their PRL, but it has never happen to me(if it does just go to a 2.1 sense rom and try to update it with your profile and should be fine). Your PRL will remain the same; though ive been on many PRL'S and diff radios and never had any issues what so ever. As long as you are up to date with the latest PRL then your phone wont go crazy and be stuck in roaming mode lol. Some people create their own PRL's and put them in and etc. But your PRL isnt changed, just radio man if thats what your asking im kind of half asleep.
Click to expand...
Click to collapse
Thats what I was wondering, thanks. I did a search and have a verizon tower like 1/2 mile from my house, sprint only has them antennas around my neck of the woods. So I am gonna try this radio and see what happens
cordell12 said:
Thats what I was wondering, thanks. I did a search and have a verizon tower like 1/2 mile from my house, sprint only has them antennas around my neck of the woods. So I am gonna try this radio and see what happens
Click to expand...
Click to collapse
Dude try it man I love the Verizon radio its freaking sick...for me at least. My coverage was so bad they gave me a free sprint airrave(mini cell tower box). But I get a 40% signal increase with the radio I posted for the other dude.
Bad coverage/signal = bad battery life
Sent from my HERO200 using Tapatalk
Does anyone know were I can get the other Verizon radios that can be used on the hero I've tried the one above but no noticeable aprovements I'm on the stock sprint radio and it seams to be working the best but no were close to perfect because I live in the stix as well and I just wanted to test the other VW radios just to be sure lol
Sent from my HERO200 using XDA App
Bierce22 said:
Does anyone know were I can get the other Verizon radios that can be used on the hero I've tried the one above but no noticeable aprovements I'm on the stock sprint radio and it seams to be working the best but no were close to perfect because I live in the stix as well and I just wanted to test the other VW radios just to be sure lol
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Check that website up there it should be another Verizon radio on that website link i provided earlier. If not when I get home ill post it for you dude.
Sent from my PC36100 using Tapatalk
I'm debating if I should flash a verizon radio. I don't want to be stuck in roaming. I just need better reception
dirkyd3rk said:
Check that website up there it should be another Verizon radio on that website link i provided earlier. If not when I get home ill post it for you dude.
Thx alot
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Sent from my HERO200 using XDA App
Bierce22 said:
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
So I can just flash the verizon radio in recovery Even though I'm not on a sense rom?
Newklearx3 said:
So I can just flash the verizon radio in recovery Even though I'm not on a sense rom?
Click to expand...
Click to collapse
The best way and easiest is to just use rom manager download the radio then go to rom manager and install zip from SD card find the radio click on it do not wipe or anything then rom manager will boot into recovery and install then it'll turn of and on and you'll see the android Guy with a black screen then it'll reboot again and you'll see a a box with an arrow then your phone will reboot again normally and it should be installed but make sure your using clockworkmod with rom manager
Sent from my HERO200 using XDA App
Bierce22 said:
The best way and easiest is to just use rom manager download the radio then go to rom manager and install zip from SD card find the radio click on it do not wipe or anything then rom manager will boot into recovery and install then it'll turn of and on and you'll see the android Guy with a black screen then it'll reboot again and you'll see a a box with an arrow then your phone will reboot again normally and it should be installed but make sure your using clockworkmod with rom manager
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Hmmm. I rather just download the radio boot into recovery and flash it myself. Seems simple enough.
Newklearx3 said:
Hmmm. I rather just download the radio boot into recovery and flash it myself. Seems simple enough.
Click to expand...
Click to collapse
Yes that work's just install it like any other rom but do not wipe anything
Sent from my HERO200 using XDA App
dirkyd3rk said:
For a fact verizon has better signal in my area as well. Lets start by saying people flash radios because they can provide different signal and or battery boost. You have to try diff radios to see how results go I have about 5 radios on my sdcard and i gave them about a day of use to test each. One way to check is to go to cm settings and select user interface, then status bar and from there check show dbm(signal strength) and hide the signal bars. Coverage is so bad in my home but the desire radio jumps my home signal from -110dbm to about -76dbm which is really good compared to 110. Anything over -90dbm isnt really good coverage. You can flash these radios from any rom just need to be rooted. BE really careful though i have a cdma hero which means cmda radios only. If you flash a radio from a gsm phone/hero you WILL BRICK YOUR DEVICE. You can do this from a sense rom if you want but im just on cm6.1 stable. And to answer your last question, it is very reversible; you can flash radio after radio like I have done but once again just be careful not to flash any gsm radios. Hope this helps man.
Heres the radio i use, i recommend for best results give each radio about a day
http://geekfor.me/hero/radios/baseband-232401109/
This is how to flash a radio
http://geekfor.me/faq/flash-radio/
That site has a handful of cdma radios that would work on your cdma hero just browse around. Theres also a new radio thats hanging around one of these threads (.29 radio) but it doesnt help much cause coverage sucks like the (.27) stock radio. To check which radio you are on just go to settings then about phone, then it says it under BASEBAND version.
The list of known radios/basebands:
1.04.01.09.21 (old 1.5)
2.32.40.11.09 (eris/desire)
2.41.04.02.02
2.42.00.03.10
2.42.01.04.27 (2.1 ruu radio)
2.42.02.10.29 (newest sprint radio)
Click to expand...
Click to collapse
damn, flashed this and still loading at CM6 boot screen
feeeeew nevermind I got it.
Lets see how good this radio is
Page just massivly updated..... ALL my questions were answered. About to flash the Verizion radio, ill post back with the results.
s2vash said:
Just curious.... All of the radios on this site say for 2.1, even though im on CM6 2.2.1, Will i be ok if I flash the radio you provided?
Refer to my post above and yes radios work on all roms they go deeper than the rom itself so even nanding will not change it
Also, can I flash it just like a rom with Rom manager?
Click to expand...
Click to collapse
Sent from my HERO200 using XDA App
Hey Guys,
I would not be posting this if I had not already tried everything. After flashing various ROMS, i have the good ol' OS says its 100% when i charge, and the moment i unplug it goes down to 96%. I have tried doing all the various battery calibration methods, but none help ( mostly because i can never really get up too 100%, not matter how many times i charge it). Is my battery faulty?
Thanks in advance
You are on a 2.2.1 rom. Try as you might you will net get 100%. Known issue
mcord11758 said:
You are on a 2.2.1 rom. Try as you might you will net get 100%. Known issue
Click to expand...
Click to collapse
Yes, I am on 2.2.1. Do you suggest trying a different one? I am thinking of switching to a Rogers based one (my captivate is from Rogers)
13a said:
Yes, I am on 2.2.1. Do you suggest trying a different one? I am thinking of switching to a Rogers based one (my captivate is from Rogers)
Click to expand...
Click to collapse
Switching will give you your 100%. Not really an issue for me
13a said:
Yes, I am on 2.2.1. Do you suggest trying a different one? I am thinking of switching to a Rogers based one (my captivate is from Rogers)
Click to expand...
Click to collapse
Switch to a 2.2 based kernel. I got 100% when on 2.2.1 rom but a 2.2 based kernel, like SetiroN's v1.4.7.
Sent from my GT-I9000 using XDA App
diablo009 said:
Switch to a 2.2 based kernel. I got 100% when on 2.2.1 rom but a 2.2 based kernel, like SetiroN's v1.4.7.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ok, sounds good, i will give it a try. thank you for the advice
Bump for more advice
I tried all the above, and switched to firefly ROM, but after calibrating it (as in had to try at least 10 times charging it to even get to 99%) it improved by 1%, so now it charges to 97%. Any more suggestions? thx.
13a said:
Bump for more advice
I tried all the above, and switched to firefly ROM, but after calibrating it (as in had to try at least 10 times charging it to even get to 99%) it improved by 1%, so now it charges to 97%. Any more suggestions? thx.
Click to expand...
Click to collapse
That's strange. Which version did u use? 1.4.7 1200 version always worked for me.
Sent from my GT-I9000 using XDA App
Well, that kernel is not compatible with the firefly rom (i could be wrong) I have not had time to try too many combinations, but that's my next step today. I shall try a different 2.2.1 rom with the kernel you suggested. Switching to a Rogers 2.2 did not fix the problem tho. I will report back and let you know.
Sent from my SAMSUNG-SGH-I897 using XDA App
diablo009 said:
That's strange. Which version did u use? 1.4.7 1200 version always worked for me.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I was referring to switching back to stock when I said I I tried the suggestions. Like I said above, I will try your method tonight. I wanted to see if there is a solution without flashing. Thx for the advice again.
Sent from my SAMSUNG-SGH-I897 using XDA App
It amazes me what people go through for the littlest things. If your battery is charging fully, to around 4180mv after removing it from the charger, it is full regardless of what the % reading is. Continually "calibrating" and "bump charging" is pointless and will cause more harm in the long run.
It worked! Problem solved. Thank you! I have used the Setiron 1.5.6 kernel, and my battery is at 100%.
newter55 said:
It amazes me what people go through for the littlest things. If your battery is charging fully, to around 4180mv after removing it from the charger, it is full regardless of what the % reading is. Continually "calibrating" and "bump charging" is pointless and will cause more harm in the long run.
Click to expand...
Click to collapse
Yes, I agree, but it was just bugged me, so I tried to fix it. Nothing wrong with that.
13a said:
Yes, I agree, but it was just bugged me, so I tried to fix it. Nothing wrong with that.
Click to expand...
Click to collapse
Even I was so bugged out with it initially I switched to SetiroN's. But I now I learnt to live with it.
Hello everyone
I have recently developed this annoying issue with my captivate running 2.2. When I am reading my txt messages, I keep getting a search window pop up, without me hitting the search kit on the phone. It sometimes flashes in and out of the search and it sometimes even brings out the voice search. Each time I have to hit the back key a few times to get back to composing my txt or reading it. I've done a search on the net and I don't seem to be the only person experiencing this issue, but I can't seem to find a solution for it either. It is starting to get more frequent. How can I fix this issue? Do I have a virus?
It could be on the rom your on, if your on one or stock? Or maybe it could be a hardware error
Next time state what rom, kernel, elect your on. So that can help people make more sense off the problem
speedy_11 said:
It could be on the rom your on, if your on one or stock? Or maybe it could be a hardware error
Next time state what rom, kernel, elect your on. So that can help people make more sense off the problem
Click to expand...
Click to collapse
Hey speedy_11
Thanks for your reply. Forgive me I am a newbie so I will try my best. The phone is an At&t phone that I unlocked and use on the Fido network in Canada. The current firmware version is 2.2, the kernel version is 2.6.32.9 and the build number is FROYO.UCKB1
I don't have any roms just the regular Samsung update. Where do I go from here?
Moisture problems I have the same thing. Throw it in a bag of rice overnight and be glad it is not the back button doing it
Sent from my GT-I9000 using XDA App
crystalhand said:
Moisture problems I have the same thing. Throw it in a bag of rice overnight and be glad it is not the back button doing it
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks crystalhand
I will try that out tonight.
cygon said:
Thanks crystalhand
I will try that out tonight.
Click to expand...
Click to collapse
Any luck with the rice? this is a fairly rare problem and i just want to make sure it works for everyone
crystalhand said:
Any luck with the rice? this is a fairly rare problem and i just want to make sure it works for everyone
Click to expand...
Click to collapse
I tried it out and still no luck. I was planning on trying it out again tonight and hoping for the best but as of yet no luck. Is there something else other than rice that I can try?
I've been having issues for a while now (about 3 month) where anyone I speak to on the phone can hear their own voice echoing back. I don't hear anything on my end.
It started happening at a point where a made a few changes to my phone (upgraded to JB, new battery, replaced the charging circuit and flashed a custom rom) so im having trouble pinning down what is causing it.
Has anyone else experience similar issues and know how to solve it?
marcboy said:
I've been having issues for a while now (about 3 month) where anyone I speak to on the phone can hear their own voice echoing back. I don't hear anything on my end.
It started happening at a point where a made a few changes to my phone (upgraded to JB, new battery, replaced the charging circuit and flashed a custom rom) so im having trouble pinning down what is causing it.
Has anyone else experience similar issues and know how to solve it?
Click to expand...
Click to collapse
Open call dial -> call settings -> additional settings -> tic on noise reduction
OR during having a call, press menu -> noise reduction on
..
Makes no difference.
I forgot to mention that I'm on the Stunner 2 rom but have tried a few others all with the same problem.
try different modem, maybe modem issue? That usually doesnt change inbetween rom. Which modem are you on? Try reflashing it, or different version. At own risk
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
try different modem, maybe modem issue? That usually doesnt change inbetween rom. Which modem are you on? Try reflashing it, or different version. At own risk
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I have tried XXLSA, XXLSС, XXLSO and XXLT3 taken from this post: http://forum.xda-developers.com/showthread.php?t=1645202
You have just reminded me that since this started I have also had some issues with not being able to get a 3G signal in areas where I once could without trouble.
marcboy said:
I have tried XXLSA, XXLSС, XXLSO and XXLT3 taken from this post: http://forum.xda-developers.com/showthread.php?t=1645202
You have just reminded me that since this started I have also had some issues with not being able to get a 3G signal in areas where I once could without trouble.
Click to expand...
Click to collapse
Ok if none of that helps, as well as new/different rom/kernels, maybe hardware.
Perhaps the modem with which you didnt have any issues if you can remember.
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Ok if none of that helps, as well as new/different rom/kernels, maybe hardware.
Perhaps the modem with which you didnt have any issues if you can remember.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
It was last working when I was on Gingerbread. As far as I know I can't use the same modem while on JB can I?
EDIT: I meant to say Ice Cream Sandwich not Gingerbread
marcboy said:
It was last working when I was on Gingerbread. As far as I know I can't use the same modem while on JB can I?
Click to expand...
Click to collapse
in that case you can try, but I suspect issues. Modems shouldnt matter at all which why originally they arent supplied with custom roms. I am really just guessing now.
I preferred lp5 with all roms untill Jb, now lt3.
I think maybe give mobile odin a try with flashing the modem, versus flashing the zipfile.
Also keep a lookout for logs, maybe it gives some details as to what is going wrong with your phone. Try logcat, elixer2 or android tuner (paid) for that.
Sent from my GT-N7000 using Tapatalk 2
Hello XDA,
So I've purchased my 1st quad-core phone Saturday. I'm extremely happy about the phone's cosmetics and performance. Of course, being the flash-aholic that I am, I decided to beef it up!! After finially getting an AOSP rom that I felt comfortable with, I flashed and everything was great.... Until I noticed that my data stopped working. The funny thing is if I turn on airplane mode, make a call, or restart the phone the data comes on for about 2 minutes and then turns back off. After messing around with settings and such, I restored my stock rom. On the stock rom data works like it should. So I decided to try 2 other roms. One being GE and the other AOSP. Both are doing the same thing with data connectivity.
Is this a known issue? Did I do something wrong? I looked through the Q&A's and I didn't find anything. Keep in mind that I am very experienced up to full development of rooting/flashing/customizing/etc
Thanks in Advanced!!!!!
Update: T-mobile is my service provider
*bump*
It's imperative that I find out if this is fixable or not as I will return the unit if it's not...
Apologies
Sent from my HTC One using xda app-developers app
DonSolo said:
Hello XDA,
So I've purchased my 1st quad-core phone Saturday. I'm extremely happy about the phone's cosmetics and performance. Of course, being the flash-aholic that I am, I decided to beef it up!! After finially getting an AOSP rom that I felt comfortable with, I flashed and everything was great.... Until I noticed that my data stopped working. The funny thing is if I turn on airplane mode, make a call, or restart the phone the data comes on for about 2 minutes and then turns back off. After messing around with settings and such, I restored my stock rom. On the stock rom data works like it should. So I decided to try 2 other roms. One being GE and the other AOSP. Both are doing the same thing with data connectivity.
Is this a known issue? Did I do something wrong? I looked through the Q&A's and I didn't find anything. Keep in mind that I am very experienced up to full development of rooting/flashing/customizing/etc
Thanks in Advanced!!!!!
Update: T-mobile is my service provider
Click to expand...
Click to collapse
Did you try updating the radio firmware to match the ROM that you were using? Did you try another Sense ROM to see if the issue wasn't an underlying setting from a GE or AOSP ROM? Did you flash a custom Kernel? Did you match the RILs? Lots of things that you could try to isolate the issue.
Athrun88 said:
Did you try updating the radio firmware to match the ROM that you were using? Did you try another Sense ROM to see if the issue wasn't an underlying setting from a GE or AOSP ROM? Did you flash a custom Kernel? Did you match the RILs? Lots of things that you could try to isolate the issue.
Click to expand...
Click to collapse
I fixed the issue... Wasn't aware that there was a different section for T-Mobile. Man I fell incompetent smh.... I'm running a Cyanogen Mod now
Thanks as I'm noting your suggestions
Sent from my One using xda app-developers app
DonSolo said:
I fixed the issue... Wasn't aware that there was a different section for T-Mobile. Man I fell incompetent smh.... I'm running a Cyanogen Mod now
Thanks as I'm noting your suggestions
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
I use PA from the regular HTC One forum even though I'm on T-Mobile... It shouldn't matter, I still get the same speeds. Some different ROMs will use different names, like the aosp stuff uses 3g, H, H+ and LTE. In order to enable lte you have to go into the settings for mobile data, APN and then make sure it's the one that's like fast.tmo whatever. That's the LTE APN
Sent from my HTC One using xda app-developers app
what's the exact APN name that should be there? I was reading about it but no one said what T-mobile's APN should be. they just noted that it should be changed the correct carrier.
edit: Thanks Button hit!!
DonSolo said:
what's the exact APN name that should be there? I was reading about it but no one said what T-mobile's APN should be. they just noted that it should be changed the correct carrier.
edit: Thanks Button hit!!
Click to expand...
Click to collapse
"fast.t-mobile.com" for LTE.