Database Develop

Flashing radio on uk version of 02x

Hi guys!
I got a little question. I do have ClockworkMod Recovery and my device is rooted.
Running stock at the moment as awaiting any news ergarding cm7.
I have seen the post regarding the radio baseband. I have seen many users have flashed it on theiers 02x`s but I`m not sure if this update apply to uk version. My current one running Baseband 1035.21_20110315. The update version is Baseband 1035.21_20110405 that apparently improves radio and signal performance.
I did try to flash the radio on mine with smartflash, did nandroid backup, flashed the baseband, did nandroid backup and my phone didn`t boot. It got stuck on lg loading bar and that`s it. I did try to flash it back to stock but it didn`t help.. Had to returned my phone for new one
Do you guys in uk have any luck with flashing new baseband? Should we? My signal on vodafone reallly sucks.. And battery very poor so far but I just did second charge..

That baseband is for all regions, however it also requires an updated RIL. Do a search for that either here or on MoDaCo.
Sent from my LG-P990

Thanks for prompt replay,
So far I found:
SmartFlash for P990 is for use on Windows PCs.
To use P990 flash to flash this baseband:
Download the utility file below
Download the driver file below
Download the baseband file below
Run the SmartFlashTool_P990.exe application on your PC
Turn device off, remove battery, plug device in while holding volume down - you should see a software update message on screen and the COM port should be filled automatically in the flash application below after installing the drivers if required.
Select the 'ROM Copy D/L' tab
Ensure 'Normal Mode' is selected
Ensure 'Erase CAL' is NOT selected
Click the browse button next to 'CP Bin:' and select the baseband (FLS) file
Click 'Start' and wait for the flash to complete
The all important files...
SmartFlash P990 - DOWNLOAD (http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110315/) (ROMraid Load Balancing) - MD5: fe350443518c98f7e089fac48fa36be3
SmartFlash drivers - DOWNLOAD (http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110315/) (ROMraid Load Balancing) - MD5: 70ebd70389c0e3011d4d6b4434f8458a
Baseband 1035.21_20110405 - DOWNLOAD (http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110315/) (ROMraid Load Balancing) - MD5: 599fb242c0224894b1ad2eb004586527 (thanks for the file you-know-who!)
Baseband 1035.21_20110315 - DOWNLOAD (http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110315/) (ROMraid Load Balancing) - MD5: 9b6f600cfa9f528595e5106305770448
They do not mention anything about flashing RIL.
I found this one http://android.modaco.com/content/l...r-r1-stock-patch-pack-updated-ril-1301920892/
Is there any chance you could help me with that please?
As I see it is:
1. nandroid backup
2. Flash baseband with SmartFlash P990
3. flsah ril from clockworkmod
4. clear cache
5. restore backup
Is that right?

http://forum.xda-developers.com/showpost.php?p=12923153&postcount=30
The RIL is in the BIN file.
So download the zip archive and follow the instructions.

Hi kopchev. I`m sorry for being a pain but where can I download the bin file?
I already downlaoded my Baseband 1035.21_20110405 - DOWNLOAD (http://android.modaco.com/content/lg...5-21-20110315/) (ROMraid Load Balancing) - MD5: 599fb242c0224894b1ad2eb004586527 (thanks for the file you-know-who!). Is this the massive file I need to download from the link you provided in your replay?
Can you provide me please with the link to the ril bin file I need? I would appreciate.

http://www.fileserve.com/file/Wapeq87/BIN_LGP990AT-00-V10b-234-XX-MAR-14-2011+0.zip

Thank you very much kopochev and withoutwings for all the help! I did as you said, just performed a nandroid backup and it worked like a charm. Got latest baseband up and running! You are stars!

Any feedback from the new radio. I flashed my mom's 2X and I still find the intalk sound a bit distorted and muffled...

Actually just made a couple of phone calls and tested with my voicemail. It actually made a bit of difference for me. It seems to be much better in my case. The voice quality has improved and seems cleaner as well.

[Q] Anyone who succeed to root GT-N7000B?

I tried to find out how to root my GN, GT-N7000B.
But I could not find out the way.
Even I checked Kernel Version, LA2 there is no way to root.
Finally, I think my phone is a kinds of Not Directly ROM.
So, I will downgrade my ROM.
Before that, I would like ask if there is anyone who succeed to root this model.
Thanks in advance.

rapboy75 said:
I tried to find out how to root my GN, GT-N7000B.
But I could not find out the way.
Even I checked Kernel Version, LA2 there is no way to root.
Finally, I think my phone is a kinds of Not Directly ROM.
So, I will downgrade my ROM.
Before that, I would like ask if there is anyone who succeed to root this model.
Thanks in advance.
Click to expand...
Click to collapse
Check the information on this website:
http://rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall/

Upgraded GT-N7000B
rapboy75 said:
I tried to find out how to root my GN, GT-N7000B.
But I could not find out the way.
Even I checked Kernel Version, LA2 there is no way to root.
Finally, I think my phone is a kinds of Not Directly ROM.
So, I will downgrade my ROM.
Before that, I would like ask if there is anyone who succeed to root this model.
Thanks in advance.
Click to expand...
Click to collapse
I decide to root my phone accroding to Dr. Ketan.
I thought this phone is non directable ROM.
Check this as the below.
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: https://rapidshare.com/files/3690281..._FACTORYFS.zip
(special thanx to schiwa for providing premium a/c to host file)
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol Down + Home + Power)
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
When I was done this instruction there are two bugs.
one is typing error "null, null" and the other is brick whenever turn off the display.
But I flashed Chrack's ICS XXLPY V4 directly.
Check this as the below.
##############################################
# Download small v4 (332MB): Chrack_XXLPY_small_xda_v4.zip
# MD5 Hash: 8DDC1C4DDEC2FAE19A6B838A15660888
##############################################
From the small Version i deleted some Apps.
The Apps can you download here:
Download lite Apps (301MB): lite apps xxlpy.zip
MD5 Hash: 4567FCD16B4BF80BBEC686BB14B4029D
Instruction
a) coming from a rooted GB-ROM:
- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
- put zip-file on your USB-storage
- boot in Recovery
- Flash Abyss Kernel 4.2!!!
- boot back in recovery (you find this option under 'advanced')
- FullWipe
- Flash ROM
- reboot system
- ...you are done
==> there have been reported problems with a constantly rebooting system when doing installation coming from a GB-ROM as posted above! So the safe and 100% successful way is installing LPY Stock-ROM, root Stock ROM and then go on as described below under point b2). Do not ask for a tutorial on how to install and root LPY Stock ROM....it is describe enough here in Forum!
Click to expand...
Click to collapse
Now I am using my phone after installation of ICS.
There will be some bugs during installation.
But you can do it because I already succeed to root and flash ICS.
Good Luck!!

Rom 4.0.4 - v30А - available for download!!

Official Rom from LG - v30a!!!!
This release is the same that is from 7.12.12!!!!!
---------------------------------------------------------------------------------------
links for download:
official link from lg (kdz version)
http://csmg.lgmobile.com/swdata/WEBSW/LGP990/ANEUDW/V30a_00/V30A_00.kdz
Smartflash version of the Rom
http://file.qip.ru/get/EpX_YlZ5/BIN_LGP990AT-00-V30a-EUR-XXX-N.html
mirrors:
http://www.multiupload.nl/Z4413CU6XN (thanks to sander-m)
http://www.putlocker.com/file/28C0DF5FDD929E34 (thanks to tiagorl)
Ril http://www.multiupload.nl/2764GZ1F8Q
BB http://www.multiupload.nl/0C893V659X (thanks to cojo11)
---------------------------------------------------------------------------------------
You are going to download zipped file. This The download contains the following files: (thanks to petr.klos)
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
---------------------------------------------------------------------------------------
For flash use Smartflash
Smartflash tutorial by PAUL (thanks to petr.klos)
I would just add, that this thread is focused on flashing sole baseband. To flash firmware (ROM) you have to add one single step.
Where is
"--Click the browse button next to 'CP Bin:' and select the baseband (FLS) file--"
you add
"--Click the browse button next to 'AP Bin:' and select the firmware (BIN) file--"
For those who get errors while flashing, this is what always fixes issues for me: (thanks to Custom40)
1) Reboot PC and just start over.
Or:
2) If you face an error in the middle of the installation, then re-plug the phone, start over but this time put the AP file in the CP bin box and the CP file in AP box.
---------------------------------------------------------------------------------------
-=How to get root=-
=1= (thanks gabrielecif)
To get root easy (no data wipe and original bootloader) go to these thread:
http://forum.xda-developers.com/showthread.php?p=35138820#post35138820
=2= (thanks to RobYyY)
UNLOCKED BOOTLOADER+CWM6+ROOT
o2x-nvflash-bootloader_unlock_v30a+CWM6.zip
♦unzip attached archive
♦put your phone into nvflash mode(don't know how? use search button)
♦open "flash-boot.bat"
♦put again your phone into nvflash mode
♦open "cwm.bat"
♦boot into cwm and flash SuperSU Root.zip
♦reboot and enjoy
EDIT1: Root doesn't work with su303.zip i don't know why.. but i have made a zip with supersu and root is working. have fun(supersuroot.zip is attached)
=3= (thanks to joiN85)
-After you install with smartflash v30a rom, download and flash "Bootloader unlock ICS Official" and "Recovery 5.0.2.8e v30a Official"
-Flash with NVFlash: Recovery 5.0.2.8e v30a Official + Bootloader unlock ICS Official
-Go in cwm and install "Superuser-3.1.3-arm-signed-tradotto.zip"
-Reboot
-Now you have Root
IMPORTANT!!!
Some users have charging problems (while connect your phone to charge with screen on - it breaks)
It is becouse of root in some case, without root everything is ok. Need more fredbacks for this!
Credits to Daniel Aminov, he received the link (smartflash version from 4.12.12).

wow. hope this is real.. can't wait to test

Yeah, i hope so too) Now i must go and I'll return in the evening, and downloading the firmware will be finished i think. Then I'll be able to say exactly.

It looks like that it comes from anonymous.
Gesendet von meinem Optimus 2X mit Tapatalk 2

URL from Leaker doesn't say error 404 anymore for me, but still can't download KDZ file :fingers-crossed:
sander-m said:
OK, new mirror for those who want stable/fast download (mirror by google);
http://goo.gl/RDqeW
Click to expand...
Click to collapse
File contains:
Code:
LGP990AT-00-v30a-EUR-XXX-NOV-30-2012+0_AP.bin 01.12.2012 00:02:38
LGP990AT-00-v30a-EUR-XXX-NOV-30-2012+0_CP.fls 30.11.2012 22:14:06

Could anyone who downloaded it, put it onto some other fileshare? (Kindly please)
Was at it myself but only downloaded 45 MBs then it crashed.
By my WinRAR, it contains
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
uncompressed filesize 1 018 167 296 B
and probably CP, which I cannot confirm, since my download failed and I can't w8 for another 12 minutes to redownload it. Worksh[ee]t.

downloading now. hope its real and genuine...for me, the leaker still says not found

donwloading

Downloading...

downloading 20 min left

The download contains the following files:
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
I will see if I can upload to a mirror.

Who got the baseband for this 30a?

Finally waiting to get back home n try this........

Shadowchaz said:
The download contains the following files:
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
I will see if I can upload to a mirror.
Click to expand...
Click to collapse
Can u confirm whether its genuine and can u gives all some more details after installing. I probably wud've done it if i had downloaded it... And thanks a million for mirroring it...waiting for the link...

orbital_71 said:
Who got the baseband for this 30a?
Click to expand...
Click to collapse
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?

naazgulla said:
Can u confirm whether its genuine and can u gives all some more details after installing. I probably wud've done it if i had downloaded it... And thanks a million for mirroring it...waiting for the link...
Click to expand...
Click to collapse
Trying to upload to my dropbox, but the upload keeps failing

rxformula91 said:
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?
Click to expand...
Click to collapse
We cannot correct you, since you in fact are correct.

rxformula91 said:
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?
Click to expand...
Click to collapse
I just want BB

Thanks for sharing this,
I've completed the download, currently smartflashing it to my O2X.
I'm also uploading it right now to other filehosting services.
I will report back soon. Maybe this is the real deal.
Edit:
Mirror:
http://www.multiupload.nl/Z4413CU6XN
Smartflash error occured . Maybe it's just a fake or whatever. Device is still at v28G.

Flashing.....

[Q] fresh install... is it possible?

Hello,
I'm pretty newbie when dealing with phones, yet pretty good with PCs in general. Which throws me off is mainly term used which means nothing to me. So I'll be as blunt as possible:
how can I reinstall my Samsung Galaxy Ace? Like a fresh install... I tried to do various things with it, ended up by installing jellybean 4.0 and not sure where but it went wrong but it doesn't boot now. I can enter PX-Recovery window, use all rooted functions. Best result I had was when device was booting after "installing a rom from sd card" was a blue screen when loading or just bright screen like the device is on yet nothing else.
Thanks in advance.

IReSky said:
Hello,
I'm pretty newbie when dealing with phones, yet pretty good with PCs in general. Which throws me off is mainly term used which means nothing to me. So I'll be as blunt as possible:
how can I reinstall my Samsung Galaxy Ace? Like a fresh install... I tried to do various things with it, ended up by installing jellybean 4.0 and not sure where but it went wrong but it doesn't boot now. I can enter PX-Recovery window, use all rooted functions. Best result I had was when device was booting after "installing a rom from sd card" was a blue screen when loading or just bright screen like the device is on yet nothing else.
Thanks in advance.
Click to expand...
Click to collapse
Yes, you can flash a fresh stock rom using Odin 4.38
Follow this guide
forum.xda-developers.com/showthread.php?t=1034145?
Here you have a useful Q&A Thread (How to get Root + CWM 5.0.2.6 Fixed, flash a stock rom, and many more...)
forum.xda-developers.com/showthread.php?p=42293402

I was digging that thread and I couldn't find any working links. That thread led to few others websites/threads which also had OPS + Odin links thought they were useless too because none of the download links worked..
Any idea where could I get those OPS files from? I've managed to find Odin 4.38, now I only need the OPS.
Viper The Ripper said:
Yes, you can flash a fresh stock rom using Odin 4.38
Follow this guide
forum.xda-developers.com/showthread.php?t=1034145?
Here you have a useful Q&A Thread (How to get Root + CWM 5.0.2.6 Fixed, flash a stock rom, and many more...)
forum.xda-developers.com/showthread.php?p=42293402
Click to expand...
Click to collapse

IReSky said:
I was digging that thread and I couldn't find any working links. That thread led to few others websites/threads which also had OPS + Odin links thought they were useless too because none of the download links worked..
Any idea where could I get those OPS files from? I've managed to find Odin 4.38, now I only need the OPS.
Click to expand...
Click to collapse
Here you have it

Viper The Ripper said:
Here you have it
Click to expand...
Click to collapse
Shouldn't the zip contain all the OPS files that I would need to input in Odin?
Extract previously downloaded firmware
Open ODIN 4.38 on your PC and change OPS file name to
Cooper_v1.0.ops
Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
If archive contains only <filename>.tar.md5 select it as PDA and OPS as OPS, leave other fields EMPTY
Click to expand...
Click to collapse

IReSky said:
Shouldn't the zip contain all the OPS files that I would need to input in Odin?
Click to expand...
Click to collapse
No... ".ops" file is an unique file, Odin need it recognize your device model
Select ONE PACKAGE and continue the guide (the new firmwares)
Official Firmwares website, choose your country if you want
http://www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=0#firmware
You'll find: Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC in FULL PACKAGE ROMS (normally old roms)

a
Viper The Ripper said:
No... ".ops" file is an unique file, Odin need it recognize your device model
Select ONE PACKAGE and continue the guide (the new firmwares)
Official Firmwares website, choose your country if you want
x
You'll find: Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC in FULL PACKAGE ROMS (normally old roms)
Click to expand...
Click to collapse
Kies doesn't wanna start when the phone is plugged yet starts with no device found and Odin says "Please connect phones !!".
I did format /system... could that be the cause?

IReSky said:
Kies doesn't wanna start when the phone is plugged yet starts with no device found and Odin says "Please connect phones !!".
I did format /system... could that be the cause?
Click to expand...
Click to collapse
No.
Restore a backup if you want and enable USB debug mode, unistall Kies, re-install Samsung drivers and try again using Odin.
You can try changing the USB port too (even using other PC, if you can [friend, brother, father...])

Viper The Ripper said:
No.
Restore a backup if you want and enable USB debug mode, unistall Kies, re-install Samsung drivers and try again using Odin.
You can try changing the USB port too (even using other PC, if you can [friend, brother, father...])
Click to expand...
Click to collapse
Sadly I didn't make a backup thinking it will work.. I will try the other things in a moment. thanks

[Q] MY Galaxy Tab is stuck in a boot loob

Hello Guys
I Have a Galaxy tab GT-P1000 WI-FI+GSM
It's Stuck In a BOOTLOOP:crying::crying:
AND THE 4 TOUCH BUTTONS IN THE BOTTOM OF THE TABLET DOESN'T WANT TO LIGHT:crying::crying::crying:
BECAUSE WHEN THEY LIGHT THE TABLET WORKS FINE
I Have TO PUT IT IN THE CHARGER FOR ABOUT 8-9 HOURS TO WORK
AFTER I COMPLETLY FORMATED THE DEVICE AND INSTALED THE STOCK 2.3.3 ROM THE PHONE STUCK IN A BOOT LOOP
I PUT IT IN THE CHARGER FOR ABOUT 8-9 HOURS BUT THIS TIME IT DIDN'T WORK:crying::crying::crying:
PLEASE,HELP.

What did you do? What files did you flash? We need details

Here Are The Files
Jarmezrocks said:
What did you do? What files did you flash? We need details
Click to expand...
Click to collapse
P1000JPJPD_P1000OJPJPE_P1000JXJP4_HOME.tar.md5
gt-p1000_mr.pit
dbdata.tar
these files worked fine until i formated every thing on the device using overcome kernel 4.0.0 and reinstalled those files
i tried every way that made it run in the past but....nothing,the 4 touch buttons in the bottom of the device doesn't work any more
the tablet will work if they light up

Preacher_M4 said:
P1000JPJPD_P1000OJPJPE_P1000JXJP4_HOME.tar.md5
gt-p1000_mr.pit
dbdata.tar
these files worked fine until i formated every thing on the device using overcome kernel 4.0.0 and reinstalled those files
i tried every way that made it run in the past but....nothing,the 4 touch buttons in the bottom of the device doesn't work any more
the tablet will work if they light up
Click to expand...
Click to collapse
Yes your device should be recoverable. If it is working all bar the touch buttons then something just must have gone wrong in the flash?
I have had issues with similar files. I would suggest that you go to the thread where you downloaded the Overcome kernel and you will see the download for GB_Stock_Safe_v5.zip. Try >>> Here thread by @sos_sifou
Ensure that you have copied all of the data you require off your internal SDcard (Try mounting the card in recovery if you are unable to boot your device - Overcome kernel should allow this very easily)
Put the device into download mode, Use Odin 1.7 (only use this version)
select the same pit gt-p1000_mr.pit as PIT (naturally) and then choose GB_Stock_Safe_v5.tar as PDA, and then choose JP4 modem (or similar - what ever is best for your region)
Flash your device.
If you have troubles or brick your device (it happens - I must have done it at least 30 times last week ) then download Heimdall Oneclick Unbrick by Adam Outler >>> here. You will probably need this so you should download it anyway.
Any questions. Post back here.
BTW I am no expert, I have just failed lots of times fairly recently so I am in good order to pass on this valuable info.

I'm download the files now
Jarmezrocks said:
Yes your device should be recoverable. If it is working all bar the touch buttons then something just must have gone wrong in the flash?
I have had issues with similar files. I would suggest that you go to the thread where you downloaded the Overcome kernel and you will see the download for GB_Stock_Safe_v5.zip. Try >>> Here thread by @sos_sifou
Ensure that you have copied all of the data you require off your internal SDcard (Try mounting the card in recovery if you are unable to boot your device - Overcome kernel should allow this very easily)
Put the device into download mode, Use Odin 1.7 (only use this version)
select the same pit gt-p1000_mr.pit as PIT (naturally) and then choose GB_Stock_Safe_v5.tar as PDA, and then choose JP4 modem (or similar - what ever is best for your region)
Flash your device.
If you have troubles or brick your device (it happens - I must have done it at least 30 times last week ) then download Heimdall Oneclick Unbrick by Adam Outler >>> here. You will probably need this so you should download it anyway.
Any questions. Post back here.
BTW I am no expert, I have just failed lots of times fairly recently so I am in good order to pass on this valuable info.
Click to expand...
Click to collapse
i will try that,thanx:good:

i flashed the files
Jarmezrocks said:
Yes your device should be recoverable. If it is working all bar the touch buttons then something just must have gone wrong in the flash?
I have had issues with similar files. I would suggest that you go to the thread where you downloaded the Overcome kernel and you will see the download for GB_Stock_Safe_v5.zip. Try >>> Here thread by @sos_sifou
Ensure that you have copied all of the data you require off your internal SDcard (Try mounting the card in recovery if you are unable to boot your device - Overcome kernel should allow this very easily)
Put the device into download mode, Use Odin 1.7 (only use this version)
select the same pit gt-p1000_mr.pit as PIT (naturally) and then choose GB_Stock_Safe_v5.tar as PDA, and then choose JP4 modem (or similar - what ever is best for your region)
Flash your device.
If you have troubles or brick your device (it happens - I must have done it at least 30 times last week ) then download Heimdall Oneclick Unbrick by Adam Outler >>> here. You will probably need this so you should download it anyway.
Any questions. Post back here.
BTW I am no expert, I have just failed lots of times fairly recently so I am in good order to pass on this valuable info.
Click to expand...
Click to collapse
i flashed all the files,they worked fine but i am stuck in the boot loop
i opend the recovery and these words were written by yellow color
-- verfing internal mmc block...
checksum confirmation -> check(0)
not need checksum confirmation
already executed!!...
#MANUAL MODE#
-- Updating application...
successfully updated application.
--Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/EGY/system/'.
successfully applied multi-CSC
I Think that's the problem
i need help,thanx:laugh: