Database Develop

[GUIDE] How To Fix GPS Issues On CM7

Sup People.
I recently noticed that my GPS wasnt working on CM 7.1.0.1. After searching this forum I found that quite a few people were also having the same issues so i've decided to compile this guide (all credits to OP's, i'm just putting this info in one place)...
theres not much to it to be honest, its just the information on the issue is just scattered around - plus there are probably better and more complete guides out there
Firstly, Originally Posted by bharat_xda19
bharat_xda19 said:
First install cm7 and then make a nandroid backup of it. Then wipe everything and restore the previous nandroid backup of stock froyo rom (or any rom with working gps) and use gps to capture your location. Then again wipe everything and restore the cm7 backup. Now gps will be working. And once gps on cm7 works, then even after a hard reset it still works. This seems to be an issue only when freshly installing cm7. This is definitely a safe method.
Click to expand...
Click to collapse
The next procedures are really for advanced users only...or if you know what you are doing if you dont understand anything in this next part I would do a little reading on the topic first
Secondly, Originally Posted by CroWarrior
CroWarrior said:
I found out in this topic here:
http://forum.cyanogenmod.com/topic/2...s-doesnt-work/
that some people fixed issues with this radio:
Radio_13.53.55.24H_3.35.19.25
Click to expand...
Click to collapse
OR
[OP - http://forum.xda-developers.com/showthread.php?t=1029318&highlight=flash+a+radio by 3xeno]
3xeno said:
-- The following will only work with Clockworkmod 2.5.x.
1. To get Clockworkmod 2.x when you have a newer version, flash the 'update1.zip' in the attachments
2. If you have ROM Manager, use the 'select older cwm' at the bottom of the list to select 2.5.0.7
-- Make sure you have sufficient battery charge and do not interrupt the flashing process.
•Radio_13.55.55.24H_3.35.20.10
•Radio_13.53.55.24H_3.35.19.25
•Radio_13.53.55.24H_3.35.15.31
Click to expand...
Click to collapse
THEN...
nejc121 (edited by arkoze) said:
Download radio zip above [19.25 or 20.10 as you probably have 15.31]
Put Radio .zip on root of SD card i.e not in any folders
Start ROM Manager
(ensure you have CWM 2.x.x.x)
Click Reboot into Recovery
Flash .zip from here by going to install zip from SD card
Don't forget to wipe caches first
Reboot phone by using the "reboot" option in cwm NOT by removing the battery
Click to expand...
Click to collapse
The process will take about 10 mins so be patient
Make sure you have sufficient battery charge and do not interrupt the flashing process.
I used the 3xeno and nejc121 method's above. Downgraded my CWM (which is only temporary if selecting through ROM manager) then flashed the 20.10 radio. 3xeno recomends flashing the 19.25 radio first to see if that works but i went straight for the 20.10 = WORKING GPS
!!!DISCLAIMER!!!
I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE. IT IS YOUR DECISION TO GO AHEAD WITH THESE MODS SO ONLY YOU CAN BE BLAMED FOR YOUR ACTIONS
p.s. if followed correctly, you shouldn't go wrong

In simple terms.
1.gain temp 2.5.0.7 cwm via Rom manager or temp update zip if your on a newer version already.
2. Flash 19.25 or/and 20.10 radio.
3. Reboot.
I have NEVER wiped anything to flash a radio as it has no influence over caches whatsoever.!!!!
Whenever I had gps issues I just flashed the 19.25 radio then test gps. Then re flash 20.10 radio. Never failed me yet. Lol.
regards,slymobi

slymobi said:
In simple terms.
1.gain temp 2.5.0.7 cwm via Rom manager or temp update zip if your on a newer version already.
2. Flash 19.25 or/and 20.10 radio.
3. Reboot.
I have NEVER wiped anything to flash a radio as it has no influence over caches whatsoever.!!!!
Whenever I had gps issues I just flashed the 19.25 radio then test gps. Then re flash 20.10 radio. Never failed me yet. Lol.
regards,slymobi
Click to expand...
Click to collapse
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.

apollopayne said:
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.
Click to expand...
Click to collapse
yes here they are

slymobi said:
yes here they are
Click to expand...
Click to collapse
thank you so much

apollopayne said:
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.
Click to expand...
Click to collapse
the links still work. just dont use the megaupload one, scroll down and use other options

Hi there!
I've tried this multiple times but it still doesnt seem to work :/ Any suggestions on what to do next?

MacGyver Jack said:
Hi there!
I've tried this multiple times but it still doesnt seem to work :/ Any suggestions on what to do next?
Click to expand...
Click to collapse
Try using an app that triggers gps like gps test from the market. It worked 99% of the cases for me.
Sent from my HTC Wildfire using Tapatalk 2 Beta-5

I think I broke my O2X...help?

Hello! New member here so please excuse me if I'm posting to the wrong forum or anything like that.
Not to take long of your time, I can't get my phone to boot. It shows the 2 LG logos and won't proceed beyond that. So I need to know if there's a way to flash a ROM and a Recovery with it like that.
Thanks for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.

May.Assem said:
Hello! New member here so please excuse me if I'm posting to the wrong forum or anything like that.
Not to take long of your time, I can't get my phone to boot. It shows the 2 LG logos and won't proceed beyond that. So I need to know if there's a way to flash a ROM and a Recovery with it like that.
Thanks for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
Can you access CWM? Try to pull out the battery, put it in, press power button + volume down at the same time. Wait til the LG logo appears and release it.

mrgian said:
Can you access CWM? Try to pull out the battery, put it in, press power button + volume down at the same time. Wait til the LG logo appears and release it.
Click to expand...
Click to collapse
No. It just freezes at the LG logo.
Sent from either my Iconia-A500 or my LG-P990, depending.

May.Assem said:
No. It just freezes at the LG logo.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
I guess you need to flash the stock ROM by using SmartFlashTool. Its easy to use. There's a thread that has simple instructions.

mrgian said:
I guess you need to flash the stock ROM by using SmartFlashTool. Its easy to use. There's a thread that has simple instructions.
Click to expand...
Click to collapse
As weird as this is, I suddenly can start into recovery. Is SmartFlashTool still the way to go? I ask because I don't want to ruin things any further.
Thanks again for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.

May.Assem said:
As weird as this is, I suddenly can start into recovery. Is SmartFlashTool still the way to go? I ask because I don't want to ruin things any further.
Thanks again for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
if u can go into recovery i would advise djangos last rom or temaseks or misjugedtwats

May.Assem said:
As weird as this is, I suddenly can start into recovery. Is SmartFlashTool still the way to go? I ask because I don't want to ruin things any further.
Thanks again for the help.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
That's a good news then! What version of cmw u got? Do you have sdcard? I would suggest temasek cm7.2 build. 2 thumbs up!

mrgian said:
That's a good news then! What version of cmw u got? Do you have sdcard? I would suggest temasek cm7.2 build. 2 thumbs up!
Click to expand...
Click to collapse
Really?! That's great to know.
Recovery is v5.0.2.7
ETA: I flashed the ROM I had on before all that mess started and now my phone is working again. I'm not sure if things went awry because AOKP's last build was screwed or because I removed the SDcard before flashing in an attempt to force the phone to use the 5GB of internal memory that has been sitting useless since I got the device.
can't I flash the last owaine version I used?

May.Assem said:
Really?! That's great to know.
Recovery is v5.0.2.7
ETA: I flashed the ROM I had on before all that mess started and now my phone is working again. I'm not sure if things went awry because AOKP's last build was screwed or because I removed the SDcard before flashing in an attempt to force the phone to use the 5GB of internal memory that has been sitting useless since I got the device.
can't I flash the last owaine version I used?
Click to expand...
Click to collapse
Your phone working now? Try doing the 3 wipes (factory, cache partition, davlik [advance]).

mrgian said:
Your phone working now? Try doing the 3 wipes (factory, cache partition, davlik [advance]).
Click to expand...
Click to collapse
It is.
I wiped every thing before flashing the ROM and I have a complete copy of all the files I had on the SDcard saved on my PC. As soon as it finishes charging I'll move the TB files back to the SDcard and see if I can restore my apps. Unfortunately, I have to redo my system settings by hand. But I don't really mind.
Thanks a lot for your help. I really appreciate it.
Sent from either my Iconia-A500 or my LG-P990, depending.

May.Assem said:
It is.
I wiped every thing before flashing the ROM and I have a complete copy of all the files I had on the SDcard saved on my PC. As soon as it finishes charging I'll move the TB files back to the SDcard and see if I can restore my apps. Unfortunately, I have to redo my system settings by hand. But I don't really mind.
Thanks a lot for your help. I really appreciate it.
Sent from either my Iconia-A500 or my LG-P990, depending.
Click to expand...
Click to collapse
Your welcome. Glad I helped.

Wifi Connection Issue .108 + .118

So as Im sure everyone here knows, new firmware updates have rolled out...
For some odd reason, though, I cannot enjoy them. I came from iHackers 4.1 ROM and attempted to update to the Criskelo .118 ROM. All went okay, except the wifi kept saying "turning on."
Then, amongst other problems, I tried to go to just a stock .108 by downgrading... Still, "turning on wifi."
I'm not sure if there is any relevance, but I had Phil/TWRP dual recovery installed. The Criskelo ROM instructions said I had to have CWM if on a locked bootloader, but I am unlocked. Perhaps I misunderstood and it has to be CWM for both? I did notice that despite many efforts to get my dual recovery back, I was stuck with CWM (I did get dual back though eventually).
So could the problem have been with the conflicting recoveries? And perhaps it didn't install the kernel or ROM properly?
Thanks in advance for any replies.

ShadowTech13 said:
So as Im sure everyone here knows, new firmware updates have rolled out...
For some odd reason, though, I cannot enjoy them. I came from iHackers 4.1 ROM and attempted to update to the Criskelo .118 ROM. All went okay, except the wifi kept saying "turning on."
Then, amongst other problems, I tried to go to just a stock .108 by downgrading... Still, "turning on wifi."
I'm not sure if there is any relevance, but I had Phil/TWRP dual recovery installed. The Criskelo ROM instructions said I had to have CWM if on a locked bootloader, but I am unlocked. Perhaps I misunderstood and it has to be CWM for both? I did notice that despite many efforts to get my dual recovery back, I was stuck with CWM (I did get dual back though eventually).
So could the problem have been with the conflicting recoveries? And perhaps it didn't install the kernel or ROM properly?
Thanks in advance for any replies.
Click to expand...
Click to collapse
The recovery has nothing to do with the functionality of wifi or anything in the ROM for that matter. Did you do a full wipe before installing the Criskelo ROM?
Other than that, make sure you're using the right baseband for .118. (if it even has changed)
If that all fails, make a backup of everything on your phone (also your internal 'sdcard') and do a full re-install of the official .118 ROM using flashtool.

B1nny said:
The recovery has nothing to do with the functionality of wifi or anything in the ROM for that matter. Did you do a full wipe before installing the Criskelo ROM?
Other than that, make sure you're using the right baseband for .118. (if it even has changed)
If that all fails, make a backup of everything on your phone (also your internal 'sdcard') and do a full re-install of the official .118 ROM using flashtool.
Click to expand...
Click to collapse
Yup, I made sure to do a full wipe before I installed it. I did do a backup of my internal and external SD cards just in case something managed to go wrong somehow... Im pretty sure I used the correct baseband, but I will double-check and also try your suggested method using flashtool. I'll let you know how it goes, and thanks for the response!

ShadowTech13 said:
Yup, I made sure to do a full wipe before I installed it. I did do a backup of my internal and external SD cards just in case something managed to go wrong somehow... Im pretty sure I used the correct baseband, but I will double-check and also try your suggested method using flashtool. I'll let you know how it goes, and thanks for the response!
Click to expand...
Click to collapse
Still nothing... I did more wipes/factory resets with this phone than I have ever done. lol

ShadowTech13 said:
Still nothing... I did more wipes/factory resets with this phone than I have ever done. lol
Click to expand...
Click to collapse
You had better bring your phone to the service if you don't want WiFi module dies.

Forgive me for asking, but what would be wrong with the module? Wouldn't it not work at all of that were the case? It's working right now...
Sent from my C6903 using xda premium

ShadowTech13 said:
Forgive me for asking, but what would be wrong with the module? Wouldn't it not work at all of that were the case? It's working right now...
Sent from my C6903 using xda premium
Click to expand...
Click to collapse
Alright so it's definitely not the module. I just flashed PAC's 4.4.4 Beta ROM. The wifi successfully turns on and I am able to view networks, as well as connect to them. So why then, can I not seem to get wifi working on stock based 4.4.4 or .108/.118 ROMs? Any ideas?

!OUTDATED! Use Walkerblue's Notexperience ROM!

EDIT : Dont use this, Walker blue has created a better version of the same ROM.here is link
https://forum.xda-developers.com/ga...rom-walkerblue-v1-notexperienceromv3-t3575377

Right on bro, at least everyone will know they can flash @Allooosh98'so N7 port. The options are finally growing ha. A big thanks to @messi2050 for the permissive kernel and TWRP.

Messi2050's kernel will not flash. No WiFi

amt325 said:
Messi2050's kernel will not flash. No WiFi
Click to expand...
Click to collapse
You have to extract the downloaded zip file to get the correct kernel.img file.

My bad. Added to the post that the kernel zip needs to be extracted.

Does WiFi fix work for anyone else? I still can't turn on WiFi. I followed instructions very closely. Thanks again, for working on the J700T

Used all my high speed data using this ROM. The WiFi fix did not work on my phone SM-J700T. Any suggestions?

amt325 said:
Used all my high speed data using this ROM. The WiFi fix did not work on my phone SM-J700T. Any suggestions?
Click to expand...
Click to collapse
Don't know why the WIFI fix is not working, but in case it does not. Here are the instructions on how to do it manually.
Download this View attachment wifi.zip and put it in your exernal SD card.
In TWRP, mount the system ( Mount > Check system ), and then navigate to system/etc/wifi with the file browser ( Advanced > File browser )
Delete all the files in there, and then copy all the files from the zip to the wifi folder.
Reboot. If this does not work please tell me.
Sorry again about that.
Changed instructions in post until I can figure out why the automatic fix is not working.

wifi works now but will the camera bee fixableby transfering the apks of the original like the wifi

Nope, phone still crashes by moving the stock ROM camera app to the ROM.
Closest I've gotten to a working camera was a error "Server error occurred. Restart Camera." By changing out these files from the stock ROM to this ROM :
libcamera_client.so
libcamera_metadata.so
libcameraservice.so
libcameraserive_cameramodule.so
But for some reason changing out just those 4 files causes the phone to lag like crazy.

also one more thing snapchat force reboots aswell u could put that in the bugs

Yes Snapchat did the same for me but I figured because the camera bug. Can confirm installed and booted/working on J700T1 as well guys... no wifi

packydavis said:
Yes Snapchat did the same for me but I figured because the camera bug. Can confirm installed and booted/working on J700T1 as well guys... no wifi
Click to expand...
Click to collapse
--Edit: seems like J700T1 and J700T have the same kernel, so you must of just missed a step. Still trying to figure out how to make the wifi fix just a automatic ZIP that you just flash, busy with school. Tomorrow I will look into it more.--

packydavis said:
Yes Snapchat did the same for me but I figured because the camera bug. Can confirm installed and booted/working on J700T1 as well guys... no wifi
Click to expand...
Click to collapse
The T and T1 have the same wifi files, the phones are identical from the factory minus 3 or 4 apps. The firmwares are interchangeable. You must have missed a step, walk us through your process.
Also any app that has a camera built in reliance is not gonna work, clearly, since the camera isn't working yet.

I fixed my WiFi.

vekenti said:
Nope, phone still crashes by moving the stock ROM camera app to the ROM.
Closest I've gotten to a working camera was a error "Server error occurred. Restart Camera." By changing out these files from the stock ROM to this ROM :
libcamera_client.so
libcamera_metadata.so
libcameraservice.so
libcameraserive_cameramodule.so
But for some reason changing out just those 4 files causes the phone to lag like crazy.
Click to expand...
Click to collapse
oh so it will be a bit before u figure it out and test to get the camera to work

Thank you vekenti. That did the trick with WiFi. It took quite a while to transfer each file on by one. Your instructions were great.

amt325 said:
Thank you vekenti. That did the trick with WiFi. It took quite a while to transfer each file on by one. Your instructions were great.
Click to expand...
Click to collapse
Your welcome yeah it takes a while to move all the files. Still trying to figure out a way to make a flashable TWRP zip to do it automstically.

@vekenti Great rom, fix the faults of camera and wifi please

jhan0720 said:
@vekenti Great rom, fix the faults of camera and wifi please
Click to expand...
Click to collapse
Thank you, also wifi is fixed, follow the instructions in the post.

[ROM][4.4.4]CyanogenMod 11 for Huawei y560-u02[PORT]

What's working: ril(calls, sms, mobile data for both SIMs), wifi, bluetooth, camera, torch, advanced power menu, hardware rendering, settings, Superuser.
This Cyanogenmod 11 is ported for Huawei Y560-U02, chipset sc7731g, platform sc8830.
This ROM is suitable for daily use.
Copy to microSD card Cyanogenmod 11 ROM. Reboot to recovery (TWRP).
Wipe (without rm-rf): dalvik cache, data, cache. Flash Rom through TWRP. After flashing - factory reset.
Reboot system, setup sim cards. Check APN. If it is not written, write it yourself. Done.
ROM :
https://drive.google.com/file/d/1DblNqOz3aTjLjTwicMsJuJrEWS3b8KtK/view?usp=sharing -
signed_cm11_core33g
Fix wifi_hotspot :
https://drive.google.com/file/d/1RqjwXgd17EpShiNcmdB5CBLIr02vNEIt/view?usp=sharing
Flash wifi_hotspot zip file via TWRP.
TWRP 3.0.2-0_en:
https://drive.google.com/file/d/1vJOnjEBEIkwAqtoAfd6tAL7msnAgEjbn/view?usp=sharing
Open es file explorer , go to device/efs/imei/imeino1 and imeino2 , write your imei numbers.Reboot. Calls and sms will works without this, but better to write your imei numbers.
Gapps:
https://drive.google.com/file/d/0B1MnFzuGjoAPMXZxcktublh0clk/view?usp=sharing
Do it on your own risk.
Injoi! View attachment 5175015

Gapps for this?
Hello, I managed to flash this properly, thanks a lot.
Any suitable gapps?

Otaku780 said:
Hello, I managed to flash this properly, thanks a lot.
Any suitable gapps?
Click to expand...
Click to collapse
Welcome
Gapps:
https://drive.google.com/file/d/0B1MnFzuGjoAPMXZxcktublh0clk/view?usp=sharing

Sims stuck on 2G
For some reasons I can't enable 3G, I've entered my APN manually and edited the imei values to match the old ones, still stuck on 2G.
There used to be an option in the stock rom to choose which SIM gets the 3G and which sticks with 2G, didn't find it here.
Also I can't set the screen brightness to auto, is this happening with everyone or just me?

Otaku780 said:
For some reasons I can't enable 3G ...
Click to expand...
Click to collapse
In our phones 3G(and lower) works only in first slot for sim card. Second slot uses only 2G(and lower).
In first slot set your sim card, that you need for 3G, and then write APN.
Same to do with your second slot and second sim card. Done.
Auto brightness doesn't work. I don't know why... I never used it, sorry...

Wifi hotspot?
Hello, thank you for your reply, but I'm yet to be able to enable 3G (2G works fine tho), and I've noticed that I can't enable the Wifi hotspot, as soon as the slider is enabled, it goes back off (pretty much like the 3G thing).
So I'm guessing there is something wrong with my setup? I used TWRP 2.8.7.0 but I don't see how it allows things to work and others not to, can it be the reason? And would flashing it again make it work (with the Gapps you provided, I'm having google store issues).
Thanks in advance.

Otaku780 said:
Hello
Click to expand...
Click to collapse
Hello. This gapps from thread:[ROM][4.4.4][UNOFFICIAL][SM-G360H] CyanogenMod 11 for Samsung Galaxy Core Prime , there i have ported ROM. I don't like gapps and don't use it.
3G(in first slot) works perfectly for me, why you have issues?.. It's strange...
You can to use TWRP 3.0.2-0 from this thread, but i don't think that it will solve problem...

Backing up and trying again
I'm thankful for all of your hard work, I am backing up and will flash again (cm_11 and gapps) and will see what happens.
I'm interested if other roms for Samsung Core prime would work for this phone, since you ported the 4.4.4, can the 5.1.1 and / or other versions be ported here as well? I'd like to have the latest update possible for this phone.

Otaku780 said:
I'm interested if other roms for Samsung Core prime would work for this phone, since you ported the 4.4.4, can the 5.1.1 and / or other versions be ported here as well? I'd like to have the latest update possible for this phone.
Click to expand...
Click to collapse
Hello and thank you!
For 5.1.1 we haven't kernel... When i have ported ROM, also ported boot.img, replaced split_img(zImage, dtb, etc) and have changed some thing in ramdisk. This phone still haven't update to 5.0, that we will can to use boot.img for porting... So, we can't to port any ROM higher 4.4.4
All this is very sad...
Also,it's very important, need to have bigger knowledge and experience, than i have

Deleted

What's the difference?
amiro13 said:
Forgot...
I have ported also one cm11 ROM, from here :
https://forum.xda-developers.com/ga...cyanogenmod-11-samsung-galaxy-core-2-t3308697
You can to try it :
https://drive.google.com/file/d/1IgEv7xcrageSnbD1RsiroZUv4g_edyX3/view?usp=sharing - signed_cm11_kanas
For now, i use this ROM.
Click to expand...
Click to collapse
What's the difference between the signed rom that's available for download and the one called Kanas, the one you said you are using right now ( I am not using it), which one is better, and why so?
Is there a change log?

Update
Otaku780 said:
What's the difference between the signed rom that's available for download and the one called Kanas, the one you said you are using right now ( I am not using it), which one is better, and why so?
Is there a change log?
Click to expand...
Click to collapse
I've flashed Kanas on my phone and back to the old one, it's a bit bigger and has an Alarm and calculator by default, but I still have the same hardware issues: No wifi hotspot, no 3G. So I'll stick to the TWRP backup that has all my settings and data for now, appreciate all the help.

Otaku780 said:
I've flashed Kanas on my phone and back to the old one, it's a bit bigger and has an Alarm and calculator by default, but I still have the same hardware issues: No wifi hotspot, no 3G. So I'll stick to the TWRP backup that has all my settings and data for now, appreciate all the help.
Click to expand...
Click to collapse
Wifi hotspot - fixed.
Good luck

Hi...I have ported this rom for my device. It also runs the same chipset(ie sc7731). But the camera isn't working. How to fix it. Please help...!!

[email protected] said:
... But the camera isn't working. How to fix it. Please help...!!
Click to expand...
Click to collapse
Hi
I have fixed the camera with this guide. Try it.
Good luck

amiro13 said:
Hi
I have fixed the camera with this guide. Try it.
Good luck
Click to expand...
Click to collapse
Thanks but I have already tried that... didn't work for me..

[email protected] said:
Thanks but I have already tried that... didn't work for me..
Click to expand...
Click to collapse
Ok...
Try this zip:
https://drive.google.com/file/d/0B1MnFzuGjoAPSVJ4Q3dSMUViSHc/view?usp=sharing mod_AIO
Flash zip file via TWRP.
If this does not work, extract the zip file and replace in the lib folder all libcamera..... .so files with your stock files. This is a zip file for fixing Ril, Camera, Bluetooth ...
In the hw folder, libcamera.sc8830.so and libcamera2.sc8830.so files already is modified .

amiro13 said:
Ok...
Try this zip:
https://drive.google.com/file/d/0B1MnFzuGjoAPSVJ4Q3dSMUViSHc/view?usp=sharing mod_AIO
Flash zip file via TWRP.
If this does not work, extract the zip file and replace in the lib folder all libcamera..... .so files with your stock files. This is a zip file for fixing Ril, Camera, Bluetooth ...
In the hw folder, libcamera.sc8830.so and libcamera2.sc8830.so files already is modified .
Click to expand...
Click to collapse
Thanks a lot....I will surely try that. :good:

[email protected] said:
Thanks a lot....I will surely try that. :good:
Click to expand...
Click to collapse
Maybe will to need libcamera.sc8830.so and libcamera2.sc8830.so files from your stock rom. They must to be modified, like written in guide.
Wish you good luck :good:

amiro13 said:
Maybe will to need libcamera.sc8830.so and libcamera2.sc8830.so files from your stock rom. They must to be modified, like written in guide.
Wish you good luck :good:
Click to expand...
Click to collapse
Thanks a lot...it just worked actually I was doing it wrong for the hole time but I did it... thanks man. But few other problems that were not before are now there like
2 sims not working...
Wifi not enabling...
And many more but thankfully I got some fixes for those from romclaims....!!! But again I must say thanks for your help.