Yesterday i used Odin3 v1.7 to flash my sprint galaxy tab,and it says i must have "p1_add_hidden.pit" "p1000xwjj4-rev03-all-cl639474.tar.md5" "modem_p1000xxjid.tar.md5" "gt-p1000-csc-serjj2.tar.md5" ,i only have"p1_add_hidden.pit",so can anybody know where to download the files or send me that three files? thanks a lot
my e-mail is [email protected]
no one know how to do?
Please give more info as to what rom you are trying to flash.
Related
Since a few days it is impossible to use my Samsung Galaxy GT-I9000 as a phone. Whenever i try using it, it doesnt register on the network.
I am running DarkyROM JVH v10.1 baseband version I9000XXJVO Firmware 2.3.3
If i try to register on the network is searches and searches and searches... but doesnt find anything.
What "worries" me is the fact that when i start up the phoe is tells me its a Samsung Galaxy S II, which it surely isnt!
Please advice.
CheopsChefren said:
Since a few days it is impossible to use my Samsung Galaxy GT-I9000 as a phone. Whenever i try using it, it doesnt register on the network.
I am running DarkyROM JVH v10.1 baseband version I9000XXJVO Firmware 2.3.3
If i try to register on the network is searches and searches and searches... but doesnt find anything.
What "worries" me is the fact that when i start up the phoe is tells me its a Samsung Galaxy S II, which it surely isnt!
Please advice.
Click to expand...
Click to collapse
There is your problem..
Re-flash stock firmware with pit and re-partition, When complete, check you can register on the network.
If so then avoid the ROM which you are currently running.
EDIT: When you say the phone says Galaxy S II, Is this not a boot animation taken from the SGS II ? Or is it the actual boot screen which says its a SGS II ?
Call me stupid ;-) but i didnt save my stock-rom....
CheopsChefren said:
Call me stupid ;-) but i didnt save my stock-rom....
Click to expand...
Click to collapse
No problem.
Head over to www.samfirmware.com and grab one from there, flash it through odin, Instructions are on that site too.
Thanks AzzleDazzle, but now comes up another problem.... Probably very basic, but for me, its all abracadabra.
I have an European Samsung Galaxy S GTi9000, but if i look at the site there are many roms u can download. From Android 2.1 to Android 2.3.4 for "my" device. Which is the one i should use? My ID is I9000XWJVH, which is according to the site an unknown H version.
Please advice once more, thanks in advance!
No worries, Make sure you download a firmware specifically for the I9000
the last 3 letters eg JVH is the firmware version, JV.X. represents gingerbread 2.3.3 and above.
Gingerbread is the latest release, so i would go for one of them, The one at the bottom of the page on samfirmware will be the very latest, Which i think is JVR
So look for I9000XXJVR.
flash that in ODIN and job done you should be back up and running and with the latest release.
The rest is upto you . i.e going to a custom ROM / rooting ect...
i feel more and more like a noob....
I started Odin, and there u can choose for the pit file, or for the pda file (which is the one i should use i guess), but also u have the choices of re-partition auto reboot and f. reset time. Which of those 3 (or non at all) i should use?
I dont know what has happened. I choose for only reboot after flashing. Flashing went okay, but now it seems to be stuck in a loop. The Galaxy S screen gets followed up by a Swisscom screen in a seemingly endless loop.
Worse, with volume down - power on i can not come in the download menu anymore...
Any advice would be much appreciated now.....
Also when trying a re-partitioning via Odin it doesnt work?
Found the solution. Using Odin 1.8 did the trick. I used Odin 1.3 which probably couldnt flash the 2.3.4, while when i tried with Odin 1.8 it worked flawlesly.
Thanks for your help!
Hey,
I tried flashing a rom onto my SGS but long story short into the process I messed it up and it wouldn't work.
I then accidently flashed an optus rom I had downloaded from samfirmware.com soon after I was unable to make calls/text/use internet.
I took it to Telstra and they said I needed to get the optus firmware off and put Telstra Firmware on if this is true I've looked everywhere used search functions etc and still cannot find the firmware.
Could someone please link me it most of the links are megaupload or expired. I installed a customrom (darkys) successfully thinking it would fix my problem however it did not I've checked the apn settings and my imei both are correct also another weird thing is when I search network operators I only get Vodafone and optus no Telstra I wonder what could be the cause to my problem? It would be appreciated if someone can link me to a download of a Telstra Samsung Galaxy gT i9000 stock rom as I cannot find one on samfirmware thx or link me via samfirmware if there is one
EDIT: forgot to say its not the sim I tested it already on another Galaxy S phone
HappyQQ said:
EDIT: forgot to say its not the sim I tested it already on another Galaxy S phone
Click to expand...
Click to collapse
try this http://www.sendspace.com/file/1j2jas
Thx for replying so what do I exactly do install this onto my phone? via odin?
EDIT: Oh dw I have to flash via CWM I got it now
HI all,
I need help with my phone Samsung S Advanced i9070. When there is no signal my phone reboot's same is when i turn on airplane mode ON.
This problem doesn't happen when i have no sim card in my phone but when there is a SIM it keep's rebooting. I did a SIM change and it still happen's. I did Factory reset and hard reset and i have the standard ROM, 2.3.6 build GINGERBRED.XXLD3 Kernal 2.5.35.7 the phone is unlocked and not rooted any more.One more thing i noticed is that when i press power off it doesn't turn of it reboot's.
Any advice ?
Thank you v mutch.
flash stock rom via odin if that help
nyanyanyanyanyanyanyanyanyanyanyan
Can you link me any instruction's for this phone? I worked in odin on a galaxy ace but long ago. So i will need a tut for i9070 if you can provide it?
I have serched everywhere and i cant finde how to flash it and the flash files. I cant even tell what's the newest firmware.
Plz help.
Any one?
Curent version is PDA i9070xxld3 CSC i9070OXFLE1
I cant finde it any where... Plz i need help :/
You will find the stock firmware on samfirmware (I would recommend I9070XXLE2... ). Use Odin to do the reflashing.. Here there is an XDA index for I9070 :
http://forum.xda-developers.com/showthread.php?p=33032022&postcount=4
rooting I9070PXXLK2
Hi guys, I read this forum, and I need your help.....
is it possible to root this one please?
Phone: I9070PXXLK2
Android version 2.3.6
Baseband version I9070PXXLK2
Kernel version 2.6.35.7
Build number gingerbread.XXLK2
thanks a lot
What kind of phone is it?
Sent from my SGH-I317 using xda app-developers app
Hi please can someone give me step by step instructions how to fix galaxy s i9000 as im new to android phones thats why mine is screwed.I purchased it cheap from someone as they thought it was blocked as when sim card was inserted couldnt find any network connection,I did brief investigation and found it wasnt blocked after checking with mates phone his was running Gingerbread my sim connected OK so I presumed there was a fault on mine which was running Froyo 2.2. After bit of research found a program called Odin which I installed which must have been the wrong .tar file,so now the only thing that shows on screen is in downloading mode and it still shows up in Odin program.Please help with simple instructions on how to fix do I need to replace with stock firmware if so how and where to get files.Many thanks in advance
Download firmware from http://www.sammobile.com
Select phone model and county and then download the firmware you want.
Guides are also there. If you need any other help , feel free to ask
If my post helped, don't mind hitting THANKS
hi i have the Samsung I8190N Galaxy S III mini it was running on DMODV6 but i tried to install GT-I8190_enox-reVenge-AMD3-v4.0 on it when i rebooted it comes up with galaxy s 111 mini then turns off vibrates turns on to galaxy s 111 mini turns off and does this none stop..its in a boot loop and i cant get into recovery i can get into download mode and thats where i get messed up can some one help me get my phone back its a uk mobile was on t-mobile till i rooted it. i just dont understand what odin to download and what other files ill need can some one please help me ?
ppm48 said:
hi i have the Samsung I8190N Galaxy S III mini it was running on DMODV6 but i tried to install GT-I8190_enox-reVenge-AMD3-v4.0 on it when i rebooted it comes up with galaxy s 111 mini then turns off vibrates turns on to galaxy s 111 mini turns off and does this none stop..its in a boot loop and i cant get into recovery i can get into download mode and thats where i get messed up can some one help me get my phone back its a uk mobile was on t-mobile till i rooted it. i just dont understand what odin to download and what other files ill need can some one please help me ?
Click to expand...
Click to collapse
you meant you were on EE firmware?
here is stock I8190N UK (EE) firmware http://www.hotfile.com/dl/198742579/7fbd47a/I8190NXXAMB1_I8190NEVRAMB2_EVR.zip.html
use the guide for I8190 in my signature to flash with odin
ok my friend will down load that and then read the thread thank you
all fixed i just want to say a big thanks if it wasnt for guys like samersh72 guys like me would be in such a mess i just want you to know that i along with many others appreciate all your hard work and taking the time to help bless you all
I'm having the same problem but with the Latin version (I8190L). Where do you get firmware files like that? Thanks!
dimatrod said:
I'm having the same problem but with the Latin version (I8190L). Where do you get firmware files like that? Thanks!
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/1/