Hi guys!
I was wondering why I dont get the "H" icon? I only have 3G..
At settings, HSDPA is turned on..
What could it be?
Bram87 said:
Hi guys!
I was wondering why I dont get the "H" icon? I only have 3G..
At settings, HSDPA is turned on..
What could it be?
Click to expand...
Click to collapse
it also depends on your location if HSDPA is offered. not all areas/regions are HSDPA enabled.
Yes, First of all there should be HSDPA support in your area / supported by operator.
For instance, I see 3G icon in my Kaiser, While i am connecting, the H icon appears
And then again 3G icon comes back when the connection is established!
Hi,
Im from Malaysia...
Been using Diamond for few months...
The problem is my Diamond does not show 3G signal even after i upgrade the radio to 1.11.25.01
May i know whats the problem that case this... I change to other phone with current sim card no problem...
Hope anyone here could help me.
Thank You
Reply
well, I'm not sure but lets
Go to setting-phone-band (select wcdma)instead GSM
if its work thats fine or change to auto
try the frist good lock
azizx said:
well, I'm not sure but lets
Go to setting-phone-band (select wcdma)instead GSM
if its work thats fine or change to auto
try the frist good lock
Click to expand...
Click to collapse
I selected WCDMA, directly no LINE signal...
Then i selected GSM no problem...
The Band i choose Auto...
Anyone can help??? Please...
Thanks
and you're sure it support 3g on the frequencies used by your network provider ?
An other reason which appears in my diamond : he doesn't show the 3G logo until i'm connecting to data. (For example i have EDGE logo, and after he shows H logo...)
Rudegar said:
and you're sure it support 3g on the frequencies used by your network provider ?
Click to expand...
Click to collapse
Hi,
May i know how do i check the frequencies???
My network provider does have 3G support. i use my sim card into other phone it show 3G signal. But when i tranfer back to Diamond no 3G signal...
JoOoSs said:
An other reason which appears in my diamond : he doesn't show the 3G logo until i'm connecting to data. (For example i have EDGE logo, and after he shows H logo...)
Click to expand...
Click to collapse
I tryed Data too... But it does not show also...
Hello I seem to have a problem and I am hoping someone can help. My phone is rooted running Modaco r20 Desire Rom. Radio is ERE27. I have a strong 3G signal in my town with T-mobile. My problem is that for some reason whenever I use data (internet,online gaming, searching using apps etc) the icon will stay on 3G then switch over to H. Sometimes it will stay on 3G and it will not allow any data. I know about the EDGE to 3G issues. I don't seen to have that issue. Can anyone help and or know why this happens?
Usually, when browsing the internet or anything is being downloaded at all - the 3G icon will switch to H. Really only in custom ROMs though, I don't really believe this happens in the stock ROM.. it's not a bad thing or a problem, at least not for me.
Data doesn't completely shut off for me though.
The "H" means you are achieving an HSDPA connnection of sorts. Stock does not have this icon in it, since HSDPA is a form of 3G and they didn't want people getting confused by it switching from 3G icon to H icon.
HSDPA is faster than basic UMTS, aka "3G"... so it is not a bad thing at all.
No idea why you loose your data connection all together when it switches, since it isn't doing anything other than recognizing you have a faster data connection than basic 3G, nothing is actually changing to cause you to lose your connection since it is still the same connection.
pjcforpres said:
The "H" means you are achieving an HSDPA connnection of sorts. Stock does not have this icon in it, since HSDPA is a form of 3G and they didn't want people getting confused by it switching from 3G icon to H icon.
HSDPA is faster than basic UMTS, aka "3G"... so it is not a bad thing at all.
No idea why you loose your data connection all together when it switches, since it isn't doing anything other than recognizing you have a faster data connection than basic 3G, nothing is actually changing to cause you to lose your connection since it is still the same connection.
Click to expand...
Click to collapse
no it is not...
mine does the same thing... i have to twiddle my thumbs and wait when it switches between UMTS and HSDPA... they are different frequencies just like EDGE is on a different frequency...
I don't think UMTS and HSPA are on different frequencies, the same two frequencies are used (alternating for downlink/uplink) for both, those are 1700mhz and 2100mhz.
For some reason I don't have this problem on Long Island, but when I'm in the city this happens the whole time. Might be something to do with the way the network is configured. Basically whenever data is in use, it just says 3G, but as soon as I browse to a site or actually use data, it switches to H within a second or so. I think a stock ROM would technically be doing the same thing, but it just won't show the actual switch, as it doesn't differentiate between HSPA and UMTS in the top 'taskbar.' Although it would probably show this in the phone status screen under settings.
luna9698 said:
[SNIP]
Sometimes it will stay on 3G and it will not allow any data.
[SNIP]
Click to expand...
Click to collapse
The "3G" to "H" (and back) is a "red herring". If it's "stuck" on 3G when you're trying to do data, it means your handset is having issues communicating in the AWS bands for 3G (2100/1700) and the handset hasn't dropped back to GSM/GPRS/EDGE (1900) yet or is attempting to switch frequencies and the associated towers aren't cooperating with the hand-off or the hand-off is failing.
Cheers,
Kermee
gsvnet said:
I don't think UMTS and HSPA are on different frequencies, the same two frequencies are used (alternating for downlink/uplink) for both, those are 1700mhz and 2100mhz.
For some reason I don't have this problem on Long Island, but when I'm in the city this happens the whole time. Might be something to do with the way the network is configured. Basically whenever data is in use, it just says 3G, but as soon as I browse to a site or actually use data, it switches to H within a second or so. I think a stock ROM would technically be doing the same thing, but it just won't show the actual switch, as it doesn't differentiate between HSPA and UMTS in the top 'taskbar.' Although it would probably show this in the phone status screen under settings.
Click to expand...
Click to collapse
I'm in times square. My phone has never switch to UMTS. Either HSPA or EDGE.
also while it's idle it will only use 3G
it will switch to H to transfer data, then revert to 3G
Kermee said:
The "3G" to "H" (and back) is a "red herring". If it's "stuck" on 3G when you're trying to do data, it means your handset is having issues communicating in the AWS bands for 3G (2100/1700) and the handset hasn't dropped back to GSM/GPRS/EDGE (1900) yet or is attempting to switch frequencies and the associated towers aren't cooperating with the hand-off or the hand-off is failing.
Cheers,
Kermee
Click to expand...
Click to collapse
Ok now that makes sense. Anything I can do to help with the hand-off?
luna9698 said:
Ok now that makes sense. Anything I can do to help with the hand-off?
Click to expand...
Click to collapse
Not that I've found. I have this problem BAD here in Phoenix. I never even bothered with WiFi until I got a Nexus, now I can't live without it. I found that sometimes kicking the phone in and out of Airplane Mode sometimes alleviates it being "stuck".
luna9698 said:
Ok now that makes sense. Anything I can do to help with the hand-off?
Click to expand...
Click to collapse
Try setting the US BAND only in phone info.
ram130 said:
Try setting the US BAND only in phone info.
Click to expand...
Click to collapse
Hmm I cant seem to find your suggestion? Can you be a little more specific? I am using Modaco rom if that makes any difference.
luna9698 said:
Hmm I cant seem to find your suggestion? Can you be a little more specific? I am using Modaco rom if that makes any difference.
Click to expand...
Click to collapse
Which Modaco ROM? If it is Desire, you have to flash the newest radio, and do it after flashing the ROM itself, otherwise you will have major Radio issues... at least that is my, and a fair number of other's, experience.
pjcforpres said:
Which Modaco ROM? If it is Desire, you have to flash the newest radio, and do it after flashing the ROM itself, otherwise you will have major Radio issues... at least that is my, and a fair number of other's, experience.
Click to expand...
Click to collapse
Yeah its Desire rom. I have radio ERE27 right now
Try upgrading to the newest one, 32.26.00.24U_4.04.00.03_2:
http://android.modaco.com/content/g...-online-kitchen-optional-root-insecure-himem/
Make sure you have at least 50% battery before flashing, just download and flash via recovery just like a ROM, do not panic, ever, during the process and do a battery pull, just wait for it to flash, then ask you to reboot, reboot, it will then do the actual radio flashing (you will see a box with arrow screen for a couple minutes) it will reboot on its own into recovery, say "writting" cache with a progress bar for a few seconds. The bar will go away, but the "writting cache" text will not, don't worry it is done, just reboot and then double check it flashed by going to about phone, software, and checking baseband version.
Just remember, can't stress this enough, do not pull your battery at all during this process. And make sure you have at least 50% battery before starting. Flashing a radio is the only way you can brick an N1 right now, and only if you pull the battery during the process, or have a bad download. Speaking of which, I do recommend checking the MD5 sum to make sure it is a good clean download.
luna9698 said:
Hmm I cant seem to find your suggestion? Can you be a little more specific? I am using Modaco rom if that makes any difference.
Click to expand...
Click to collapse
*#*#4636#*#* in the dialer but I don't see US Only.
luna9698 said:
Hmm I cant seem to find your suggestion? Can you be a little more specific? I am using Modaco rom if that makes any difference.
Click to expand...
Click to collapse
*#*#4636#*#* in the dialer. Hit menu button from there.
luna9698 said:
Hello I seem to have a problem and I am hoping someone can help. My phone is rooted running Modaco r20 Desire Rom. Radio is ERE27. I have a strong 3G signal in my town with T-mobile. My problem is that for some reason whenever I use data (internet,online gaming, searching using apps etc) the icon will stay on 3G then switch over to H. Sometimes it will stay on 3G and it will not allow any data. I know about the EDGE to 3G issues. I don't seen to have that issue. Can anyone help and or know why this happens?
Click to expand...
Click to collapse
Same thing happens with me. I'm in Phoenix myself with T-Mobile and running Cyan 5.0.5.3 with EPE54B and baseband v 32.26.00.24U_4.04.00.03_2.
I'll have full bars for 3G and when I goto check the market or anything internet related, the 3G will switch to H and work or stay at 3G and pause with connection error, retry or cancel.
I started having this issue after updating my factory stock radio. Anybody know which one is the stock/default radio IMG is? I'm thinking of downgrading and seeing what happens.
ram130 said:
Try setting the US BAND only in phone info.
Click to expand...
Click to collapse
I did this and it worked great! more consistent and quicker data access doesnt take forever to swith to H like before!
scuzzy19 said:
I did this and it worked great! more consistent and quicker data access doesnt take forever to swith to H like before!
Click to expand...
Click to collapse
I still can't find the way to set it up using US bands only. Any suggestions?
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
3Flight said:
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
Click to expand...
Click to collapse
Unfortunately, it's impossible, you can either choose "H" & "3G" with wcdma/umts or "G" & "E" with GSM in Mobile Networks. You can't choose to leave out 3G when it's doing H, cause both of them are under wcdma mode.
Of cause, if you leave your "Network mode" to auto, it will jump around gsm and wcdma when it see fit. By choosing it to run GSM mode only, will keep your network connect to "E"/"G(gprs)" ONLY; Or WCDMA for "H"/"3G" ONLY.
helo
3Flight said:
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
Click to expand...
Click to collapse
im from malaysia also,im using samsung g5..in my opinion its the the phone or tab firmware or rom problems..because im using maxis and digi broadband..both network are having problem..3g and hsdpa both switch on and back 3g h 3g h..not stabil and anoyying..
Hey, im not sure what i should have called this thread but anyway, when i lose LTE on my phone it used to switch to H+, now it switches to 3G. Basically im wondering what i need to switch in the default file to display H+ instead of 3G
i hope this makes some sense
Well 3g and H+ are different. You can check to make sure in data settings that you have GSM/WCDMA/LTE AUTO set in there.
Howie3045 said:
Hey, im not sure what i should have called this thread but anyway, when i lose LTE on my phone it used to switch to H+, now it switches to 3G. Basically im wondering what i need to switch in the default file to display H+ instead of 3G
i hope this makes some sense
Click to expand...
Click to collapse
I basically loose the H (HSPA) service with my operator by taking the 4G package, I get 4G LTE, and in bad coverage area's, which is almost everywhere for Vodafone UK except major cities, I get a G or an E unless I can connect to a wifi.