Related
Hello
My N1 can connect easily to all kind of wifi routers and modems without problem but not with my fitness club's one, they have a Linksys N160.
My N1 can detect the signal,enter the password but then it's stucked with the message ''getting ip...''
Where is the problem? is it a know hardware or software compatibility stuff?
Sometimes rebooting the wifi router helps. Also make sure that when the guy over at your fitness club reboots the router you don't have the wifi of the club saved. delete the saved wifi profile, reboot the wifi router and then try. Cheers.
Already tried it several times. I saw that OS4 of iphone/ipod have the same problem with router enabling Wireless-N, I will ask him to limit the router to B/G
I also had similar problem with Linksys WAG54G2 (at latest firmware). Then I changed to much cheaper adsl router, TP-LINK WD-W8960N and no more connection problem.
Sent from my Nexus One using XDA App
I had problems using my Nexus One on my SMC Barricade 802.11b/g/n router when 802.11n was enabled. Turned it off; problems were gone. I don't think that works well yet, though some people have said otherwise. Could be a router-specific issue.
Ok so it's a WAG160N to be specific.
He tried to use mixed B/G instead of mixed (which would imply N too) but it still stuck at getting ip...
I told him to throw this router in the garbage because anyway SE and HP mobiles can't connect too,but he said he would do it but his boss will never accept to pay a penny more
My parents had a router that did exactly the same, my phone got stuck on Obtaining IP, whilst the missus 5800 connected and broswed just fine.
It was a crappy old thing and they replaced it the other week, now I can connect and browse just fine.
I also use a linksys WAG160N.
bought a nexus one, could not for the life of me get an internet connection.
turns out dns on router is poofed, so i just set DNS from my isp manually on the nexus one together with a static ip and booya interent at full 802.11n speeds.
sometimes its the simple things.
This sounds similar to when I set my router to channel 13 or whatever the max was on it. My N1 would only sometimes get a connection, but would eventually drop it and stay off. Solved it by selecting a lower channel (WifiAnalyzer suggesten channel 1 as the best alternative to channel max) on the AP.
I can see that in CM6 nightly that I have since started using I can choose regulatory domain, and thereby open up channels previously blocked. If you can't change anything on the AP this might help you solve the problem on your end.
So suggestions if none of the posts above me provide a solution is to run WifiAnalyzer and see how the channel-graph looks.
I have had my Tab for 2 weeks now.
At home I had no problem to connect to my WiFi network for 1 week: then suddenly the Tab would not connect and would remain stuck on “getting IP address…”.
I changed from WPA to WEP to WPA2 PSK with no luck
But if I go to a static IP, then I have no problem to connect.
On my office “public” WiFi network, exactly the same problem: it worked for a week and then bingo stuck on “getting IP address…”. Again going to static IP solved the connection problem.
My question is: how do you delete a network from the list? It seems to me that the Tab keeps an IP address in memory and if ever that address is taken by another device, it gets stuck!
Any advice would be appreciated.
I had this exact same issue on the same day I bought my Sprint Galaxy Tab (11/14). I did a hard reset that afternoon, and I haven't experienced the issue since. I'd already had all of my apps downloaded, and settings tweaked, so hard resetting was kind of annoying. I hope this doesn't come up again.
Yep sounds familiar, my Thomson Speedtouch 780i runs on a old firmware which gives me same issue with the Tab, had to run with no security. If you decide to run with no security turn off broadcasting..or update firmware/router..
My router is quite recent and has the latest firmware.
All my toys (iPad, Dell Streak, HD2 together with 3 PCs) connect without any problem.
The Tab had no problem either for a week.
Then for unknown reason no way to connect unless using a static IP.
And as I have not found a way to delete the network in memory (short of doing a hard reset)I am stuck.
And now same problem arises with office netxork:-(
Yeah just do a factory reset in privacy settings i think
susu42 said:
My router is quite recent and has the latest firmware.
All my toys (iPad, Dell Streak, HD2 together with 3 PCs) connect without any problem.
The Tab had no problem either for a week.
Then for unknown reason no way to connect unless using a static IP.
And as I have not found a way to delete the network in memory (short of doing a hard reset)I am stuck.
And now same problem arises with office netxork:-(
Click to expand...
Click to collapse
My Tab is doing the same thing now. I can't do a hard reset....is there another solution?
Ugh, I have the same issue! Had it for 2 days and all of the sudden it's stuck on Getting IP address from... Resetting to factory defaults was depressing. I wish there was another way!
It also happened to me when I was on vacation at my relatives home. The tab would work for a day or two and then be stuck at that message. I had no issues with doing a factory reset as it was still new. But then I started using the static IP trick and that worked. Now I'm back at home and I don't have this issue at all. Been using it for a week with my wifi and all is well.
Nothing was actually working: restarting the router, forgetting the network, creating the network manually, changing the authentication method, etc.
I'm sure its was an issue with the router at my relatives home, but still why was my Nexus one and Laptop connecting with no problem???
For those who are having the problem, use a static IP for the time being, you don't have to reset.
-Gus
I ended up switching to Channel 1 on the router at home, and haven't had any problems since. Chose Channel 1 after running WiFi Analyzer.
having this same problem. I've messed with WEP vis WPA and tried static IP. Using a verizon fios router. any help?
Bah, it happened again! Now I really dont want to reset
Same issue here ...
I can get WIFI at Starbucks but not at home ( Open-WRT on linksys )
I wonder if it depends on SIM card being inserted?
Mine is a Verizon FioS router as well, at work. Can get on fine at home or anywhere else. My iPad had a problem here forgetting the network but I could at least reconnect. This is doing exactly like you guys.
I wouldn't even care that much except when I'm inside the office I can only pull in Edge data. Ugh.
I had to change wireless settings on my Linksys - most changes were to disable some fanny things like "afterburner" - and setup wap2 for security to have a stable wifi.
I've had the same problem with my TMobile Galaxy Tab. All I do is to turn off Wifi in the Settings app, then turn it on again. I am usually able to snarf an IP address straight away after that.
It also helps to just turn the device on and then off again. it boots so fast that it isn't too annoying.
I had similar problem at home. My DHCP server had wrong time set. After setting the time on DHCP server correctly everything is back to normal.
i hav a tab on tmobile love it not sure if i had the same issuse as u guys tho the issuse i had was it would work without any problems im talkin about wifi then the next day the wifi doesnt want to lock onto the wifi it would search then drop to start serchin again , now wat i learned is sum apps require wifi to work because high data at the same time it changes sumthing in ur wifi settings after using the app the first time which would require u to master reset the device to resolve the issue the program that was doin it for me was frostwire
same here
my version of the same problem appeared when i changed the static IP of my home router (AVM Fritz!Box 7170). before that i always got a dynamic IP through DHCP on my galaxy tab.
After changing the router IP i only could connect with a static IP.
if i use a different WIFI network instead, DHCP is working as expected.
in my opinion the problem is with the firmware storing the network settings and with no possibility of deleting it completely. a hard reset cannot be the solution...
does anybody of you know if this problem occurs on other froyo-based devices also? is there a way of deleting network settings in a working way?
Had the same problem, EU TAB white Stock 2.2 rooted spot connecting to my main Wifi but connects to 3 or 4 other dhcp APs.
Have a htc Desire whit stock 2.2 + rooted and never had that problem.
In the end i hardreset Tab and no problems 1week and counting.
EDIT
FUuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
Happen again... im not going to hardreset again, im looking for a more permanent solution
Had the same problem. I have the Verizon FIOS router. The solution is actually easy. Just drain the battery of the Tab. Charge it to full and turn the Tab on. I think the Tab really "forgets" the old network after this kind of restart. No need to reset your Tab to the factory settings.
Im having some issues with my new galaxy tab.
Whenever I try to use wifi/internet I get alot of network errors/timeouts/dropped packets, no matter what app I use.
whenever that happens I have to press refresh/retry a few times and suddenly it works, after a few minutes it starts giving errors again.
this is not the already known DHCP error, i can connect to the network fine and receive an IP without problems. the problem is the connection itself.
i have already tried to change my routers encryption from wpa tkip to wpa aes, which seems to reduce the number or errors I get but did not fix the issue completely. when I tried to use my htc ad-hoc hotspot with the tab it seemed to work better, could have been coincidence tho
some info:
- its a branded tab from tmobile austria
- the firmware is t-mobile branded PDA: P1000BOJJ3 Phone: p1000xxid CSC: p1000maxjj4
kernel: 2.6.32.9 root at SE-S611 1 build froyo.bojj3
- router is in my room, so the range is fine
so what can I do to fix this? anyone else having this problem? also, why does it say "root" in kernel I dont think I have root access?
ps: your spam check is running amok, cant even use at sign in my posts??
I get similar things sometimes, not sure about the solution. What are the errors you get onscreen?
The root bit means that Samsung build the kernel on a machine that was logged in as root, i.e.: they're stoopid
You get used to the spam filter
It's possible if your in a highly populated area that there is too much contention for air space. There is a great free app in the market called 'wifi analyser'. Use this to test if another wifi is overpowering yours. Also, use the time graph tick away in the background to check for dropouts.
The fix may be as simple as changing the channels of your access point.
Sent from my GT-P1000 using Tapatalk
Try enabling XPress™ Technology on your wireless router (if option to enable it exists and your routers supports it) analyze your network to see if there is interference from other networks. Finally adjust your router to 802.11 G/N setting I don't think you need a/b.
Hope it helps
Hi Guys
I have been using my Note for around 3 months and today it has just stopped working on WiFi at home - all ok at work just gets stuck at obtaining IP address. Nothing has been changed on the phone or the BT Home hub no updates it just wont connect
Any ideas???
Many thanks
SG
have you tried rebooting your router?
Hi,
Have rebooted router and still no good. Yesterday my Note connected to WiFi at work No probs. Got home and it got stuck on obtaining IP. Today get to work and my Note will Not connect to work WiFi now either Same prob stuck at obtaining IP have restarted the work router also still no help. Network Key is correct or it would not get to obtaining IP any ideas on whats the problem?
Had a look round seems to be a problem on the Galaxy SII also. Just for info I have not added any new apps for days.. must be the phone buy why?
Any ideas?
Thanks
S
Lets try this:
Check whether your laptop can get an IP from your wifi.
I. YES
- Turn on wifi on your note.
- Go to Applications -> Settings -> Wifi settings.
- Look down at Wifi network.
- Touch into the name of your wifi then choose "Forget network".
- Turn off wifi on your note.
- Turn it on again.
- Enter the key and see what's happen.
II. NO
- Check your router configuration.
If you hav have enabled mac protection on router, reset it.
Sent from my GT-N7000 using xda premium
Hi,
Laptops x3 and other peoples phones can get onto WiFi ok, both at work and at home, my Note Will connect ok to the BTFON / BTOpenzone (off of the same routers) with no problems again both at work and at home. We have changed nothing with the routers (BTHome hub 2 and BTBusiness hub at work).
Can you advise what to check with the router as all seems to be in order for all other WiFi devices, it's just my Note that is having a fit and wont connect?
Many Thanks
S
Edit; dr.ketan
Hi, Re mac protection, the routers auto set up and I am unaware how to check re mac protection. I cant understand why has my Note decided to stop connecting out of the blue?
I have similar issues.
I have setup a WIFI hotspot and all my non-Android devices can login without any issues (Notebooks x2, iphone3, iphone4, ipad), however my Note and my Blade (all running 2.3.6) and an Acer A500 Tablet (running Android 3.1) cannot connect.
The android devices see the hotspot and will attempt to get an IP, but most of the time will not succeed.
Any suggestions?
I'm having the same problem with the "stuck at obtaning IP address" problem.
Just got my Note 2 weeks ago and am still not able to connect to the internet using wifi.
I can't connect to my home wifi nor starbucks nor any other public wifi. When i use static address, i was able to connect to my home wifi BUT could not use the internet. I really do not know what to do...PLEASE HELP!!!
I too have experienced this. Running stock 2.3.6 + root. happened with lots of different routers. Usually solved with power cycling router & note wifi. Very annoying.
I think (personally), it has nothing to do with the Note at all, BUT on most samsung smartphones...
I read somewhere that Sammy's phones have a weak side in detecting and connecting to any wifi device...
I personally tested this also with my Note, side by side with my friend's Nokia, a Blackberry and a Galaxy Nexus as well.. both Samsung phones stucked at "Obtaining IP address..." for some time, while the two phones (Nokia and the blackberry) connected thru wifi with ease... no problems at all..
I have same problem periodically at my sister's house, especially when a lot of other mobile devices using the router. If you google the issue there are many with same problem.
Simplest way to solve it for me has been to unplug & then plug the router back in. Rather annoying.
I had same prob with my galaxy tab... Forgetting a network won't help..
Nor there is fault of router...
Google this problem you will find results with solutions for xda only... (did the same but don't remember the link)
Al t bst!!
Sent from my GT-N7000 using Tapatalk
sleegrony said:
Hi,
Laptops x3 and other peoples phones can get onto WiFi ok, both at work and at home, my Note Will connect ok to the BTFON / BTOpenzone (off of the same routers) with no problems again both at work and at home. We have changed nothing with the routers (BTHome hub 2 and BTBusiness hub at work).
Can you advise what to check with the router as all seems to be in order for all other WiFi devices, it's just my Note that is having a fit and wont connect?
Many Thanks
S
Edit; dr.ketan
Hi, Re mac protection, the routers auto set up and I am unaware how to check re mac protection. I cant understand why has my Note decided to stop connecting out of the blue?
Click to expand...
Click to collapse
I am on note2 BT homehub2and having identical issues. Did you get a fix?
Hello
I have problems connecting to my wireless network with my Milestone.
First of all, infos:
Device: Motorola Milestone
ROM: CM 10-20120823-Nightly for Milestone (last version from here: http://skrilax.droid-developers.org/cm10nightly/umts_sholes/ )
Kernel: 2.6.32.9 [email protected] #1
now to my problem in detail:
I'm trying to get a working WLAN connection to my router. first, my router wasn't found at all. after some googleing i switched the channel from 12 to 11 (channel 1 to 10 are quite full).
now it found the router and the connection-symbol shows 3 to 4 (out of 4) bars connection strength. when i click it to connect, it either does not get an IP, or it shows bad connection. So to be sure, i told my dhcp to give my milestone a specific IP. But when it shows me bad connection again, the device tells me that it has no ip adress.
i was running CM7 before installing CM10. I had wlan problems with CM7 too, but they weren't that bad. ad CM7, it sometimes did not connect, but a router restart has always fixed that, and once connected it alwas worked until i disabled WLAN.
I'd like to know if anyone of you could give me some hints on how i might solve the problem, or at least find out whats the source of it
Thanks
EDIT:
for some reason i'm connected now. i dont know why, so i tested disconnecting and reconnecting. didn't work the first time, but it connected properly the second try. although i got the connection now, i'm still interested in infos about the problems