i tried to upgrade the rom from WM6.1 to dynamics 2.0
i did everything and update successfully.
x1 reboot and went into start up screen saying hard reset on first run,
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
after that it cant start up, i tried to hard reset, soft reset, take out battery, nothing seem to work, only a pulse of vibratiion... the screeen remains totally blank.
is my x1 dead?
thanks for the help
B3nGz said:
i tried to upgrade the rom from WM6.1 to dynamics 2.0
i did everything and update successfully.
x1 reboot and went into start up screen saying hard reset on first run,
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
after that it cant start up, i tried to hard reset, soft reset, take out battery, nothing seem to work, only a pulse of vibratiion... the screeen remains totally blank.
is my x1 dead?
thanks for the help
Click to expand...
Click to collapse
try to flash that rom again
try to hold two silver keys and push the power button till you see tricoloured screen or try pushing two silver keys and soft reset button with stylus which is located in a tiny hole just stylus sized on the back right side of the phone
i tried 2 silver buttone with the power button and the back hole.
but my screen still remain blanked.
totally nothing.. only a pulse of vibration.
is it possible to be in this stage? will a totally bricked x1 still able to get tri color?
i think u should charge your battery. and then put a kovsimg.nbh file on sd card.
after that install the rom by pressing the volume button down and power button.
px1ilanmy said:
i think u should charge your battery. and then put a kovsimg.nbh file on sd card.
after that install the rom by pressing the volume button down and power button.
Click to expand...
Click to collapse
hi,
i have tried charging the phone,
i tried pressing 2 silver buttons and power button
i tried pressing 2 silver button and stylus poke reset hole for 5 sec
i tried power button with volume down..
nothing works.. its just give a pulse of vibration and a black lighted up screen, nothing else.
anyone please help. =(
you know those leds on the sides of the phone try charging the phone and see if they glow if they do then your screen may be broken or your flex cable has worn off i'll put my money on the flex cable if so then you should order a new one and replace it or take it to a service centre
Info about the way you've got to the trouble looks little... not clear.
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
Click to expand...
Click to collapse
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
bruno_123 said:
you know those leds on the sides of the phone try charging the phone and see if they glow if they do then your screen may be broken or your flex cable has worn off i'll put my money on the flex cable if so then you should order a new one and replace it or take it to a service centre
Click to expand...
Click to collapse
Yeah i can charge,
Led at the side does glow, when i call it will blink and vibrate, but i cant pick up, no buttons is working on the front screen, dont know about th qwerty..
i guess flex is crappy.. but if flex is crappy, the screen will light up but remain blank? the led will glow?
ultrashot said:
Info about the way you've got to the trouble looks little... not clear.
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
Click to expand...
Click to collapse
thanks for the advise. i will try again! and report in again..
thanks alot bro!
B3nGz said:
i guess flex is crappy.. but if flex is crappy, the screen will light up but remain blank? the led will glow?
Click to expand...
Click to collapse
if you don't see SE logo on the start and backlight is turned on, if you don't see bootloader tricolor... looks really like it is flex (double check - I am not so advanced in hardware repairing).
Yes, leds should glow in that case.
ultrashot said:
Info about the way you've got to the trouble looks little... not clear.
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
Click to expand...
Click to collapse
Hi the x1 is able to start up already.
surprisingly, for its blank screen, im able to connect and sync on windows centre and load up hardspl.
after that i follow ur instruction on power+camera, it started showing tricolor and rom flash.
thanks for all the help guys.
THANKS!
my bad , sorry for wrong info
Related
Sorry if this has been asked and answered before... a quick search turned up nothing useful - but then I only got this device about a week ago and don't really know what to look for.
I pressed the Soft Reset button with the USB cable attached and the phone seems to have gone into some weird mode and now nothing I do will make it boot.
I'm stuck on a screen with 4 sections, Red, Green, Blue, and White.
The text
KAIS130
SSPL-1.93.0000
CPLD-8
is displayed on the red section, and the letters USB on the white.
I have tried soft reset (always comes back to same screen), hard rest (does nothing), taking the battery out and putting it back. All with and without the cable attached.
Is there anything I can to do restore my device or do I need to return it?
Many thanks for any help.
You may in Bootloader mode. You may have to force a hard reset. I think if you hold the camera button and power button while turning on it should bring it up, but I am not sure on the Kaiser. I am sure someone will post up the exact procedure. I hope everything turns out OK for you.
Kevin
Thanks for the reply... I got the impression that might be the case from a google hit as well. Grrr. I was just trying to cure a 'not syncing' issue.
Alas I can't find anything to make a Hard Reset do anything - I've tried every combo of buttons I can think of, including the one in the manual and the one you just suggested... no dice
Oh well, I guess I have a very expensive paper weight
Press and hold the two action buttons (the - in between red and green buttons) and press reset with the stylus.
keep them pressed for a bit, then release only the reset button
press and hold the two soft key buttons and press reset with the stylus.
keep them pressed for a bit, then release only the reset button
after releasing the reset button hit send ( the green key ) it should show on the screen if you have done it correctly to push the send button to complete the hard reset, if not repeat the process again
if that doesnt work you can always reflash the rom using the original Kaiser rom RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88. 07_1.27.12.11_Ship.exe
its here http://forum.xda-developers.com/showthread.php?t=331900&highlight=official+kaiser+rom
since its already in the bootloader mode it will be able to be flashed if it wont hard reset
Hmm, nope the Soft+Soft+Reset doesn't do anything other than the normal reset
I think before I try the ROM flash I'd better contact HTC and make sure I'm not voiding my warranty.
It's a shame I'm going to loose the days work
thanks for the help folks.
restarted my phone at work today and all it does now is go straight to the tri colour boot loader screen. Iv take sím out, SD card out, battry out, nothing works.
Put the USB cable in and it starts on its own straight to the tri colour screen without pushing start button
Any ideas..
Thanks Ahead
Maybe it´s as easy as that the camera-button is stuck? That happened to me with the power button. Now the power button is a bit "loose" in feel but is not active all the time.
yeap
I thought of that, iv pushed the camera button quiet a few times trying to see if its stuck but it didnt help at all, still doing it. If i connect the USB cable with no battery in it starts up on its own as well and goes straight to the boot loader screen.
Its says
WING220 MFG
SPL-0.91.hard
CPLD-7
USB
update
A quick update, if i actually put the USB headphones in the phone and try to start it it works. A restart with them in works to. Take them out and its straight to bootloader again. LOL Also Windows does not recognise the phone when its conected via USB cable when its running. This seems to be a USB problem of some kind. Iv done a hard reset as well, no luck.
Try this: enter bootloader and type "boot". If it again enters bootloader after restarting do the same thing again. Hopefully that fixes it.
hehe
No change. Only way to start the phone is with the headphones connected. When the phone is running and i conect it to the pc i get this " One of the USB devises attached to this computer has malfunctioned, and windows does not recognize it "
NoNco said:
No change. Only way to start the phone is with the headphones connected
Click to expand...
Click to collapse
Try "task 8" in bootloader and then "ResetDevice"
(ps do *not* experiment with other parameters!)
nope
When i used "boot" it made a buzz and went to a white screen, had to remove battry to restart, it didnt help, tried 3 times.
" task 8 " it goes dark for a split second and back to the bootlaoder screen. remove bat. restart back to bootlaoder screen
oh after i type task 8 i get an error that pops up in mtty
wceusbsh004 port read error occured
try Hard resting it but juss to let u kno IF U DO THIS U WILL LOSE a last memory u did even phonebook and all resets like new i had to do it cuz i had a prob i could not text n stuff now it works fine after HARD RESETING
doesnt work
Iv already done the hard reset from within WM when i get the phone to work, it didnt help.
Try the hard reset after re-inserting battery immediately at power on.
(keep left- and right softkey pressed and power on I think is the key combination)
mmm
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
NoNco said:
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
Click to expand...
Click to collapse
No, the softkeys are the two buttons next to the joystick, see here ->IMAGE<-
But I would think your mini-USB connector is kind of broken I'm not sure of course
nope
Iv tried the keys on the side, iv tried the keys on the keypad. i just dont get it to work...
mm
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
NoNco said:
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
Click to expand...
Click to collapse
Hmm, looks like a bootflag related to USB is set. The reason could indeed be a physical problem with the usb port of the device. Also it could be related to dirty contacts (both of the UB port and the battery).
I’m having the exact same problem with my S730. Only works with the headphones plugged. I can’t hear nor talk if unplugged the headphones. Does anyone knows how to fix this ???
Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD, only power on and ( smart mobility in display black) and no more
helpme please
Hello there, we all understand youre frustration. But for beeing able to assist you everyone need to know what exactly happend here? Where you flashing? Did it fell out of youre pocket? What where you doing last on it and so on. Take 5 minutts or more and provide as much info you can then edit youre post. That is AFTER you have searched and digged trought this board using google aswell for keywords on youre issue.
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
did u try hard reset?
No , i didnt do it, i dont kwon how to do it?
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
I know this is a abiouse question but I have to ask, mate.. You are not running flat on batteries? If you havent flashed youre device, and it wount boot and you got power on it you should check youre waranty on the device. Try to charge it for 10 minuts or so (check that you have charging light on) then try to start it again.
I understand you correctly that you havent HardSPL youre device at all or?
hanster said:
No , i didnt do it, i dont kwon how to do it?
Click to expand...
Click to collapse
u should do a hard reset.
Here is a step by step for u:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Remember after performing a hardreset, u will loose all your data on your phome(not on SDcard).
Kaiser_Resets
Back to Kaiser Wiki
--------------------------------------------------------------------------------
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Bootloader
Press and hold the Camera button
Using a stylus, press and hold the soft reset button at the bottom of the phone
Release both buttons once the bootloader screen appears
did u do it?
this is my phone
this is my phone where is it the soft key
Press and hold both soft keys
I have currently disabled pics so I cant see the pics of your phone.DOnt u have kaiser?
The soft buttons are the ones next to gren and red phone buttons and above messaging and internet buttons.
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
hanster said:
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
Click to expand...
Click to collapse
just be sure u are doing the hardreset right. Some guys had problems, cause they had big fonger and they were pushing not just the soft buttons but also a buttons that are around them.
Hold these two soft buttons, then stick the stylus to the hole and hold it there antil a white screen appears where is the message shown. Then push the green phine button.
http://www.mediafire.com/?rc3vbcqdtbh
here you go a video
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
hanster said:
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
Click to expand...
Click to collapse
Ok, I have seen the videos. Did u try the reset with the kaiser closed?
I remember a thread with similar problem, will try o find it and post back.
PS: In the first video, u have three hands!!
OK, I found this one:
http://forum.xda-developers.com/showthread.php?t=374388&page=3
Similar problem, does your kaiser reboot continuosly or the screen just flashes.
Your best bet is to read the whole thread, try to learn something about mtty and contact gsleon.
Hey Folks,
well I've experienced a very bad problem. When I started to change my ROM again, my whole device hang up, nothing happened any more. No chance to do a Hard or Soft Reset, the Led-Ring does not even light up anymore when I plug in the USB. Neither via Notebook nore via outlet. I don't know whatelse to do, hopefully it's not dead...
Thx for all the answers and sry for my bad english...^^
can you enter in bootloader mode? if you can, it's everything ok.
Remove the battery for 30 seconds then replace it and see if it will then respond to any of the following... on switch/usb cable/bootloader mode/hard reset.
Well... the Diamond doesn't respond to anything... It isn't even recognised by Windows...
phr3n1c can you enter in bootloader mode with it? pressing volume down (on the left side) and reset in the same time, and keep holding untill 3 colour screen appears.
Nothing happens... OMG i could start crying...
WTF! If don't enter even in bootloader, I only can say that its totally bricked. Sorry
How could this happen? I just tried to install juices RoM, then it said that this isn't the right ROM for my Device, turned off the screen and.... nothing...
So there's no way for me to get this Diamond working again... I just got it for 3 weeks... 469€... mmh...
Keep trying to get bootloader mode...its very fiddely....
also try and charge your battery...was it at full charge before?
phr3n1c said:
How could this happen? I just tried to install juices RoM, then it said that this isn't the right ROM for my Device, turned off the screen and.... nothing...
Click to expand...
Click to collapse
Don't give up hope just yet, I've seen a few people on here that thought they bricked their Diamond but a few of the major contributors of the forum were able to work them out of it. Not saying it's a guarantee of course, but definitely a possibility.
2nd what the guy above me said, just hold volume down and the power button and try to get to bootloader mode... You should really be able to get to this, and once you can you'll be all set.
So the best thing for me is to leave this Thread here and wait for some answers I can try out...
Well... I use to read in this board since February and I always found all the answers to my questions...
This is the fact y this is my first post as well^^...
so i think i'll leave my xda alone 4 a while...^^ thx for all answers, upcoming and read...
mmh.. so there's nobody who's got any idea... thought more people could help me... mmh...
phr3n1c said:
mmh.. so there's nobody who's got any idea... thought more people could help me... mmh...
Click to expand...
Click to collapse
Do you flashed Diamond HARDSPL-OliNex first ?
ady_uaic said:
phr3n1c can you enter in bootloader mode with it? pressing volume down (on the left side) and reset in the same time, and keep holding untill 3 colour screen appears.
Click to expand...
Click to collapse
That is NOT the way to get into bootloader mode, if you have been trying that then there is no way you will enter the tri-coloured screen,
You need to press the power button as well as the volume down button along with the reset button to get into bootloader mode.
1) Take of the back cover of your diamond
2) Take out the stylus, notice a red dot in the bottom left corner? thats the reset button
3) Get your stylus ready to press the red reset button, but don't press it yet
4) Press and hold the POWER button and the VOLUME DOWN button, as well as holding down and pressing the reset button
5) After 3 seconds, let go of the red reset button but KEEP holding down and pressing the POWER and VOLUME DOWN buttons
6) Once the tri-coloured screen (bootloader) comes up, you can let go of the buttons.
That is how to get into bootloader mode, in depth. If that is not working that you have damaged your device quite a fair bit.
Remember if you didn't try pressing the power button to get into bootloader mode before, then there would have been no way you could have gotten into bootloader - try this method now and you might (hopefully) be flashing a new ROM in a matter of minutes.
Good Luck!
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
phr3n1c said:
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
Click to expand...
Click to collapse
Another reason why I stay away from eBay.
Did unplug the usb cable, then pull out the battery ?
Hhmm.. I wouldn't have thought a ROM could cause so much damage.
You could try this..
1) Leave the battery out for 30 minutes
2) Put it back in along with the charger
3) Try to turn on the device (hold the power button down for 15 seconds)
Selling the device on eBay should be your last resort. Try everything you can to get the device working for now.
phr3n1c said:
what can i say..? nothing happens... don't know whatelse to do now... but... can the ROM really damage the diamond that far that it doesn't even light the LED ring under the screen if i plug it into the USB...
damned... whatelse to do now...? sell it on ebay?
Click to expand...
Click to collapse
DO YOU FLASHED HARDSPL FIRST ? AND DOES YOUR DIAMOND IS UNDER GUARANTEE ? IF NOT, YOU CAN THROW AWAY.
Hold Volume down, the Enter Button and then press Reset... Hold the Volume down and the Enter button until the three colour screen appears... Try it....
Look here:
http://blog.jannewap.ws/2008/07/25/htc-diamond-reset-xda-diamond-hard-reset-anleitung/
yes, i flashed hardspl first... i dont know if it is still under guarantee if i bricked... doesn't another rom make your guarantee end? so nothing else to do...
PS: if i would have sold it on ebay, i had declared it as broken... just by the way... not to have any people think wrong things about me...
i just picked up my telus htc diamond last night. was looking forward to putting the new juicy rom on it today, but i get screwed over big time. first i tried putting the hardspl from here, that didnt work. then i went to ppc forums downloaded .057 cdma version of hardspl for diamond. that worked. so i wont over to install the juicy TELUS version of the rom 2.3. was going well, but 40% through it stopped, and ever since i was not able to get the rgb screen off my touch. i tried reapplying the .057 version and now it wont start up. the screen freezes on htc diamond touch, with version info. is it a done deal for this phone? if there is any way to fix it, please help me out. the stock version rom on it was 1.6.661. or do you think they will take it back. i will say i was updating the files, and it just keeps freezing on it. do you think they will notice i was tempering with it? any help would be appriciated. i just signed on a 3 year term, and don't feel like paying 500 dollars for it, as i was running all over the city to get the 100 discount on the phone.
please help me out on this one. thank you
when i start it up, it shows these stats
uP0B P DCBBBPZM-615010
B 80 R 0. 99. 90V
ps20 D 1. 06
are these stock stats?
did u try hard reset?
If not u can find a stock rom and try to flash it in using bootloader mode?it shd work if u r able to go into bootloader...good luck bro
i can't seem to dwonload the stock rom. but i doubt it will wokr because the phone is not synced. it wont start up. it stays frozen on that blackdiamond screen with red letters. do you think they will take it back in store if i say i dunno what happened?
i am not sure what hard reset is. i tried removing the battery and i also tried pressing on the little button behind the battery slot is.
Incubated said:
i can't seem to dwonload the stock rom. but i doubt it will wokr because the phone is not synced. it wont start up. it stays frozen on that blackdiamond screen with red letters. do you think they will take it back in store if i say i dunno what happened?
Click to expand...
Click to collapse
Tatswhy i ask to u to try to go into bootloader bro,if u can, u might still be able to flash in a rom...
Don't panic. Try Hard Reset. Keep pressed Volume down button+Enter+,,little button behind the battery slot'' and than follow the instruction on the screen. Try search better for Hard Reset
Incubated said:
i am not sure what hard reset is. i tried removing the battery and i also tried pressing on the little button behind the battery slot is.
Click to expand...
Click to collapse
hold down down vol key,centre action key and then poke and let go the red reset button while still holdin on to the 2 button,you shd see a grey screen which warn u about losing all your data.
i cna't seem to put on a stock rom. i download one from ppc forums, but it shows its 1.00. my telus cmae wiht .1.6.661
i can't seem to be able to flash anything on. i do hard reset and it goes ot the rgb screen, but not much from there.
when i try to flash it, it wont even display the image version. does it mean there is no rom on it or what?
Incubated said:
i cna't seem to put on a stock rom. i download one from ppc forums, but it shows its 1.00. my telus cmae wiht .1.6.661
i can't seem to be able to flash anything on. i do hard reset and it goes ot the rgb screen, but not much from there.
Click to expand...
Click to collapse
no,it goes to a light grey screen and ask u if you wanna hard formatt the 4gb disk or juz wanna reset the set...do u see tis sreen?
how bro?
no i dont see the grey screen. i am holding down volume down, middle circle, and pressing reset button behind, where battery is, nothing
its not coming up. either i hold down power button on top and volume down, it brings the touch diamond screen. or i hold down voluem down, circle button and reset and it also brings touch diamond screen. nothing else. it doesn't take me anywhere else from the rgb screen. does it mean i am screwed?
try the hard reset method remember hold down to the vol down and center buttons when u poke the red reset and hold it there for around 3sec
Incubated said:
its not coming up. either i hold down power button on top and volume down, it brings the touch diamond screen. or i hold down voluem down, circle button and reset and it also brings touch diamond screen. nothing else. it doesn't take me anywhere else from the rgb screen. does it mean i am screwed?
Click to expand...
Click to collapse
holding down power and vol down bring u to bootloader when u press reset!
hold down middle buttons? u mean not the circle but the whole square?
holy crap it keeps vibrating, wont stop
Incubated said:
hold down middle buttons? u mean not the circle but the whole square?
Click to expand...
Click to collapse
OH MY GOD!!!where do u came from my friend???MAR???
u dunno how to hard reset but u try to flash???
Incubated said:
holy crap it keeps vibrating, wont stop
Click to expand...
Click to collapse
at least ur diamond is showing some reaction pls try to HARD RESET UR SET FIRST