Trying to get my Bell Vibrant i9000m phone back to stock. I had a problem earlier today with a custom rom and force closes and now I think Odin is my only option to get my phone working again.
I'm using Odin 1.7 and trying to flash stock I9000UGJK3.tar. This a "one file" type of Odin flash, no need to pick PIT file, everything is in this file.
I can put my phone in download mode (vol down / home / power keys pressed), odin recognizes my phone and proceeds to flash phone. Here is the odin progress window:
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> zImage
<ID:0/005> cache.rfs
<ID:0/005> factoryfs.rfs
<ID:0/005> modem.bin
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
All this seems OK to me, after completing the above, phone reboots. Then just cycles back to boot screen flashing i9000m, never gets to samsung animation.
I'm wondering how to get past this. Any help would be appreciated.
Thanks,
Did you remove any lagfixes or tweaks before flashing back to stock?
I never had any lagfixes. I did do a data wipe before trying to install romkitchen V10 rom. Pervious to this I had the following working:
2.6.32.9 [email protected]#24
FROYO.DocRom_9.6.6_XWJS5
2.2.1
I9000BVJJPA
I started getting force closes on a number of apps, to me usually an indication that it's tiime to upgrade. I tried to go to: ZSJPJ_Wipe-v10-17-33-22-01-04-E8UWZEutAA.zip. I had some problems, tried to restore to previous backup roms I saved with ROM manager which did not work. So I figured would be the best to try to get to a stock base. Now my phone is stuck in rotating i9000m boot screen.
Well, tried everything I could think to do with odin with no luck. Brought the phone into the local bell service center and now have a loaner until my phone gets back. Using a HTC Desire Z, seems fine. I did a OTA OS upgrade to 2.2.1 while driving back to work.
i've the same problem but I try to flash with the Samsung firmware 2.1...
this is the same same problem. before, I've the Original galaxy S I9000M 2.2 update Froyo.UGKC1 kernet 2.6.32.9 Base on I9000UGKC1
version 2.2
i've make error to flash with 1 file:
I9000UGJH2-PDA-Kernel-Bootloader-CL490514-Low.tar
and 1 PIT.. (pit: 512)
who have Idea? thanks alot..
[MOD]: I've found
Related
Whilst attempting to update a custom ROM through my SD card. I ended up with my Samsung endlessly stuck in Samsung Galaxy S start up screen. I followed the instrutions in the Q &A section
by using ODIN to flash the 513 PIT (PDA Phone and CSC)
this what ODIN said:
PIT 513 flashed
then
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Removed!!
device did not start by itself
ODIN says "RESET!"
the device did not reset automatically, nor could i manually. I repeated the process via ODIN
I removed battery and started my galaxy into download mode.
and this is what is said (i believe including my previous attempt)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Removed!!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Removed!!
In the top lefthand big box of ODIN the word 'PASS!' is displayed on a green back ground
once again I am unable to restart my galaxy from the on off button.
I am able to start the phone in download mode and my laptop reassuring goes 'bong' to tell me it can see it. I wanted to ask advice on what to do next as I feel I am at a critical point. If I mess it up from here I feel I may have no way back. Please advice....
First.. Your phone is NOT bricked.
Change the title......
Second read what you need to do with the custom Rom in that tread you got it from.
I guess you don't need pit and don't need to re-partition the phone and i don't think you even use the right pit file even if you needed it.
Else just flash back a good firmware.
Sent from GT-I9000 jpo. My own kernel for z4mod and with 342MB Ram
DamianGto said:
First.. Your phone is NOT bricked.
Change the title......
Second read what you need to do with the custom Rom in that tread you got it from.
I guess you don't need pit and don't need to re-partition the phone and i don't think you even use the right pit file even if you needed it.
Else just flash back a good firmware.
Sent from GT-I9000 jpo. My own kernel for z4mod and with 342MB Ram
Click to expand...
Click to collapse
Thank you for your response, and I have changed my title.
The custom ROM that I installed was from the sd card not from ODIN so there is no detailed information about this in the ROM thread.
After the failed sd card flash I have not been able to get back into recovery mode or switch the phone back on. I could only get into download mode, so I resorted to following some of the ODIN instructions on Q&A.
I am assuming that the best route is, as you say to use odin to flash the ROM back using some 'good' firmware.
Can you recommend a suitable ROM and where I can download it?
Thanking you in advance.
I'd suggest flashing an Eclair ROM that has 2e Recovery with Odin incl. Repartition.
Or a 2.2 ROM like JPK and then CF-Root to get 2e Recovery back.
Then flash the custom ROM.
I doubt that no flash instructions were given...
Not once did you even tell us what files you even used (ROM etc.)
xero2002 said:
I'd suggest flashing an Eclair ROM that has 2e Recovery with Odin incl. Repartition.
Or a 2.2 ROM like JPK and then CF-Root to get 2e Recovery back.
Then flash the custom ROM.
I doubt that no flash instructions were given...
Not once did you even tell us what files you even used (ROM etc.)
Click to expand...
Click to collapse
Hi xero2002
Thank you for your advice.
As the ROM was an SD rom update odin isnt talked about a lot in the thread. The ROM I was upgrading to was Darky's latest Legendary Steel 4.1 Voodoo. . I was upgrading from Darky's previous Raw Steel 4.0 edition. Apologies for not having said it before
I don't think Darky's rom is meant to be flashed through odin Read the instructions in the thread on how you're supposed to upgrade it
I suggest flashing to some old eclair firmware, since that comes with 2e recovery, will save you the step of having to get CF root for it
nwsk is right. Darky's isn't meant to be flashed with Odin.
And he is also right on what he said to do next.
Pretty much what I also suggested.
You have two options.
Either flashing an Eclair (2.1) ROM which comes with 2e Recovery using Odin.
Or flashing a Froyo (2.2) ROM which comes with 3e Recovery using Odin and then applying CF-Root to get the 2e Recovery back.
From there on you can then flash the newest Darky using his instructions.
http://forum.xda-developers.com/showthread.php?t=814091
This time please READ EVERYTHING he has to say. It really does help a lot!
For whatever reason I can't find the last Eclair post anymore.
So here's the second option I gave you, it's just one small extra step.
Do this and precisely follow instructions:
http://forum.xda-developers.com/showthread.php?t=790686
Just the part where it says "HOWTO UPGRADE TO JPK USING ODIN:".
Then go here and grab the file "CF-Root-JPK-v1.1.zip" from the attachments.
http://forum.xda-developers.com/showthread.php?t=788108
Flash following instructions.
When done, you can continue with Darky's or some other custom ROM.
Thank you all for your help!
Thanks for all your input, its all sorted out now
Abso
I'm pretty sure my phone isn't bricked.
Ok, this is what I've done...
I'm on official Froyo for UK, unbranded handset (i think jpo/jpp firmware).
I tried to install Voodoo Lagfix (stable, released today) by Odin.
I started Odin up, put PDA as the Voodoo file, put my phone into download mode, connected the usb, waited for odin to detect it and then clicked start.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> Complete(Write) operation failed.
That's what Odin said, so I presumed it failed.
The screen was black and not doing anything so I unplugged it and removed the battery. When I put in battery and tried to start up phone, I get a logo of a flip phone on the left, with a line dash to a yellow triangle with black explanation mark, and then another dashed line to a computer.
Can I have a set of instructions on how to continue please!
which ROM did you install?
make sure the TAR is not corrupted
even if it failed, you can flash it again
the only way to find out if it works is to unplug and reboot it
there is always the JIG option if you don't have the 3 button modes
AllGamer said:
which ROM did you install?
make sure the TAR is not corrupted
even if it failed, you can flash it again
the only way to find out if it works is to unplug and reboot it
there is always the JIG option if you don't have the 3 button modes
Click to expand...
Click to collapse
It's not a ROM, I tried to put on Voodoo Lagfix 5 (stable) onto my stock firmware from Kies (JPP/JPO).
Shall I try to reflash the Lagfix? I think I need to flash a firmware, can someone please tell me, starting to get a little stressed haha.
BTW, Download Mode is working.
I would imagine you are going to have to flash stock firmware to it, you can try flashing it again or perhaps a different kernel
got it working now guys
just reflashed it and it worked
I was following the overcome guide and when i came to step 8/9 (flash overcome kernel) it didn't work, so then i chose the same pit which you use in a previous step and also the kernel and now it worked with the pit but not the kernel. i got stuck in download mode and tried to flash only kernel again but it didn't work not it got stuck on ConnectionSetup... or something like that. I think it couldn't find the device, i shut down odin and took out the micro-sd card which someone said could cause problems but it still didn't work. now i'm stuck at a screen like this: picture of phone .. ! .. picture of computer. I guess it means it can't connect to the computer. Anyone know what to do? I've tried searching the forums and tried some different stuff but haven't succeded.
Edit: Seems like i can use odin even though i don't get into the download mode, will update soon. Seems to work correctly, i'll give the flashing another try and i will make sure to cross the right boxes and so on.
Edit2: This time i checked that i had all the correct things crossed in Odin but when i try to flash the kernel it fails. what should i do? i come from gingerbread 2.3.3 (re-stocked) so it can't be the bootloader right?
Edit3: This is what i get when i try to flash the kernel:
<ID:0/036> Added!!
<ID:0/036> Odin v.3 engine (ID:36)..
<ID:0/036> File analysis..
<ID:0/036> SetupConnection..
<ID:0/036> Initialzation..
<ID:0/036> Get PIT for mapping..
<ID:0/036> Firmware update start..
<ID:0/036> ‹
<ID:0/036> NAND Write Start!!
<ID:0/036>
<ID:0/036> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Edit4: From my research it seems i have the same problem as people hade with the signed/locked bootloaders on froyo, however i'm running 2.3.3 and the thread specifically said not to use their patch so i have no idea of how to solve this. Help would be very appreciated.
Edit5: finally works, thanks to this: http://forum.xda-developers.com/showthread.php?t=1324052
Pleaseeee help ….. I am stuck in the downloading mode
Dear experts
I have messed up my girlfriend’s GalaxyS ….
I rooted her phone by following ChainFire’s thread http://forum.xda-developers.com/showthread.php?t=1056334
Followed every step and rooted phone ….Things went smooth…then suddenly phone keep dying in few hours even if its fully charged …. I thought of reapeting the whole process incase I made mistake at any stage
I run the Odin v1.85, selected “CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.tar” file in PDA and click on start…..Suddenly my phone died and Odin said successful 0/ Failed 1
I got in panic mode and start the whole process again…. Since then phone is in Downloading mode.....
Then Magic happen and i got following msg frm Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/004> Added!!
Then as per instruction after phone get rebooted i run superoneclick and click on Root... Its been almost 2 hours and i am having following msg on superoneclick...
Running psneuter....
Pleaseeeeeeeeeeeeeeeeeeeeeeee help me to get it up & running
Waiting for experts to save my relationship
Pleaseeeee help me guys
What to do next?
If you flash cf root kernel you will get root.You don't need superone click.
Try reboot your phone it should work.
Sent from Galaxy on latest nightly with neo kernel
First of all... what was the original firmware?
Second: I hope you have not messed with repartition and bootloader?
yeah, check what version she's running and flash cf-root, since you allready are capable of flashing with Odin you dont need one-click root.
Sent from my GT-I9000 using XDA App
Dear all,
Many Many thanks for your time & reply...
I did reboot at least 3 times... Still having same problem... very strange problem
I have fully charge the phone. Everything is working fine, did my msgs, reply to email, took few pics...upload them....SO far so good, happy happy happyy so put the phone on side & had dinner, picked up phone again and it was off...have to press power button long enough to start the phone... Works fine, shows little drain on battery..put it aside for while and it will be off strangely... Have to restart it by pressing power button on for long enough and it does start, work well and once put it on side for while it goes off .... (My girlfriend is mad at me ;-p ... Dont know how to solve this )
Please help guys ... Here is the required details...
Original-->
Firmware 2.3.3
Kernel 2.6.35.7 I9000xxJV0-CL182937
Build number Gingerbread.XXJVO
Does this info will help you to find the fault?
Really need help...
Many Thanks
Reflash the stock rom again just to be on the safe side.
Hi All,
I have been trying to find an answer for the past 6 hours, my baseband is n7000xxlp1, kernal is [email protected] #3 and build is IML74k my phone works great the problem is when i make or receive calls I have no audio and the person on the other end gets static. Im thinking it is a radio issue though I cant make heads or tails of which radio to flash. Sorry for being newbish but could someone please help me and let me know how to fix this ?
Thanks so much.
blo0kid said:
Hi All,
I have been trying to find an answer for the past 6 hours, my baseband is n7000xxlp1, kernal is [email protected] #3 and build is IML74k my phone works great the problem is when i make or receive calls I have no audio and the person on the other end gets static. Im thinking it is a radio issue though I cant make heads or tails of which radio to flash. Sorry for being newbish but could someone please help me and let me know how to fix this ?
Thanks so much.
Click to expand...
Click to collapse
Try flashing baseband lp6
Will do any leads where i can find the lp6 baseband searching is not helping me out.
Thanks in advance
Here's the latest LP6 modem: http://forum.xda-developers.com/showpost.php?p=24787908&postcount=309 Just flash with CWM Recovery.
But why not flash a LP6 based rom? Like AlBa or TheMIDTeam's B&G?
The ICS update id did is the hacked 4.03 one via odin I had root on the phone before doing it. The guide i followed is www . androidaddicted . com / samsung-3/how-to-upgrade-samsung-galaxy-note-gt-n7000-to-ice-cream-sandwich-ics-4-0-3-n7000xxlp1-411.html so i dont have CWM on it only download mode, should i reflash to a stock 2.3.6 rom ? If so I have no idea where this phone is from (region wise) is there a way to tell so i flash the correct stock rom?
Thanks.
I just tried to flash the LP6 modem in odin and get
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
???
blo0kid said:
I just tried to flash the LP6 modem in odin and get
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
???
Click to expand...
Click to collapse
Dontflsh via Odin flash via cwm recovery
I dont have CWM only odin on the phone, when i turn it on with vol down i get download mode, if i turn it on with vol up and the center button i get android system recovery, can i rename the modem file something where it will work with the apply update from external storage option ?
I put the modem zip on a microsd and tried to use android recovery to flash and it says signature verification failed
So i just downgraded to 2.3.6 and will properly root and install CWM on it and then do the ics install thanks, 2.3.6 works like a champ with the phone calls.
Yeah, then it's definately the modem file that messes things up.
With CMWR installed you can flash any rom you like in the developers section. The ICS roms I've tried are imilka's CM9v2 and ICS Stunner 5.0 Beta. CM9 was absolutely great but I like the added functionality that Stunner brings to the phone. Both roms are based on open source Android so no Samsung apps, if you want the s-pen apps like taking a screenshot, s-memo, s-note etc. then you're better off flashing a rom based on the LP6 leak.
Cool ill look into those roms thanks for all the help.
Hi all,
sorry if this is stupid because im kind of new to this.
I am having a similar problem with my galaxy note gt-n7000. its upgraded to ICS (no root, no custom flashed roms etc) from my carrier (Vodafone AU) and it was fine but after a week it also gets no call audio..
When i attempt a call, it connects successfully, (Although it doesn't make any calling sound) and I cannot hear the other party, but they can hear me
Im pretty sure its not a hardware issue, as other applications such as viber and tango both work fine.
Any ideas would be much appreciated. thanks in advance.