[Q] LGMobile Phone Software Update Tool Install freezes - LG Optimus 2x

I've downloaded from www.lg.com a software "LGMobile Phone Software Update Tool Install" and running always freezes with approx. 10% of progress-bar. (in each windows xp, vista and 7)
How long must i gonna waiting?

Same thing happened to me today.
I got it to work by rebooting my computer.
However it was not worth the effort. The tool informed that an update was available but then after a couple of other steps then it then informed me that my phone LGP990 (Optimus 2X) was not supported by the update tool
Jake

same here...

update tool
Same problem here.

I had the same problems using the program when connected to the internet through a proxy server. It seems that you need a direct internet connection to start the program.

Anybody knows why the on the phone "check for updates" menu is giving id check errors or not running at all??

I wasnt able to update the phone The update freezed,and I got the message to unplug my phone and take out my battery I tried it several times with no luck Finally I changed the cable,and the phone updated fine The cable I used first was a brand new original cable I think there is something factory wrong with the cable and the charging unit It doesnt seem to charge the battery as it should do either I am taking it bacj to the store today for repair My LG O2x is running 2.2.2 like a dream now
Sent from my LG-P990 using XDA Premium App

LG Mobile Update Tool
Guys, I had a bad experience with the LG Mobile Update Tool. My recommendation is DO NOT USE IT. Here's why:
I recently got 2 Optimus P500 for me and my gf, experimented on my phone updating to 2.2.2 using this tool. Everything went fine until it got stuck at 50% or something and the phone's screen on Emergency Mode. Luckily after removing my battery and turning on the phone, it booted fine and I checked the software version and it updated, that was my 1st scare.
Now, after convincing my gf to update her phone as well (she witnessed my 1st scare), I start doing the same thing with her phone, it downloads the update blablabla when it is supossed to start flashing it got stuck at 4% and it lost connection to the phone. The phone was in Emergency Mode as well so I proceed to remove the battery, it boots, I check the software version it was 2.2.1 (same version it had) so I decided to retry (BAD DECISION). I plug the phone back, and hit Retry, it starts updating, then again it gets stuck on 4% and loses connection. The phone's screen in Emergency Mode, I remove the battery again and no luck. Now it just boots straight into Emergency Mode and my PC won't recognize it.
Now, I'm not an expert on these phones but there's the KDZ tool which you can find somewhere in this forum and use that. Find the latest .kdz for your phone and flash it yourself without using the Mobile Update Tool, I should've done that myself after the 1st scare.

My optimus P990 got stuck while using update tool...can't get it runnig again. Please wait while upgrading.....for four days now. :-(
I am wondering if I made the right choice switching to LG instead of SEx10!

i was facing the same problem, then i switched the cable onto another USB ports of my PC... suddenly it worked... but if i knew it's not worth it, i wouldn't have it done...
sucks, now i have to re-install all of my apps and restore my datas...

LG firmware upgrade 4% emergency mode problem
I agree -- if you are considering upgrading your LG P500 Optimus One firmware, then I would suggest that if you are happy with the way your phone is working then it's not worth the risk of the problems that it could cause you.
In my case, like a previous post, I was going through the process of installing my first firmware upgrade for my Optimus phone -- it also stopped at 4% and there was another window in the background saying that the USB connection had failed (even though it was still connected). The phone was showing a yellow screen saying it was in "emergency mode". I had previously decided to do the upgrade after scanning the internet for any possible problems that people had with their LG firmware upgrades, and had read about the "emergency mode", but trusted the software to do it's job, so I was surprised that this was also happening to my phone. Luckily, after taking out the battery and restarting the phone, it booted up to my usual screen and I hadn't lost any data. It is not as responsive as it was before, sometimes apps don't respond, so something may have been written to the phone, though I don't want to go through the process like before and have problems occurring.
Therefore, my advice is to NOT upgrade firmware using the LG software until they can improve it and not have everyone facing these kinds of problems.

I tried to update my phone with the official software. Halfway through, it said it lost connection with the phone, and then after following the instructions, and taking out the battery and trying again, it said that the phone did not require updating. Unfortunately, it would turn on, being stuck at "Software Upgrading. . . ", so I had to use nvflash to sort it out. The LG update software is flakey, and I wouldn't risk using it!

so how to by pass the hanged phone now?
i encountered yesterday.

I also have freezes too often with software and i reported about it to LG and they just said "try with another computer"...
If my computer can't ****ing handle that **** bit soft then no other computer can i would say...
But thats LG and their taughts... bad devs!

i have the same problem, install freezes at 10% so so...
but had somebody deleted all the LG registry entries to try reinstall it????
i'll take a look at it

possible fix
I tried something and it started updating again. You should try to go to the "Customer Support" tab on the LGMobile Support Tool and click on "Recovery Phone." Now look on your phone for the IEMI # and enter that in the IEMI field, then hit check. It should start the update process again. Hope this works.

Stupid LG
To make it work use Windows XP or windows 7, then put the phone in upgrade mode (turn off, press volume + button and plug into usb) then hit retry on the ****ing tool

Related

[Q] infinite boot and many other problems

I'll tell you the whole story, to get your best understanding of my problem, so please read and help me if you can!
So i've had quite a few problems while trying to modify some stuff on my Android Samsung Galaxy S I9000M from Bell.
At first what I did was root my phone. Secondly I installed Darky's 5.6 Gingerbread edition, but like a dumbass I didn't understand how to install, so I dragged and dropped through the windows explorer the contents from the .zip.
Ever since I've done this, i've had non stop problems.
I've installed Odin 3.0 and the samsung drivers for my Windows 7 64bit computer, and have had the phone recognized by the Odin software when it's in recovery mode, as well as when using it as USB storage. I have never had the phone be recognized by Samsung Kies.
So after I screwed up the installation of Darky's 5.6 my phone started to act all screwed, problems like a ton of force closes, and a few missing apps. This isn't even the worst of it.
My phone started after a while to load up normally, and once I unlocked the device from it's home screen, it would immediately restart, and do it's fancy google color thing for a minute, and then load it's home screen. It would then do this automatically until I took the battery out.
One day after being fed up from hearing my dad yell at me after I just got the phone, I hooked it up to Odin got it to be recognized by my computer, and then tried to load on a new firmware. Nothing worked. There was no message saying it worked, no progress bar was moving, and nothing in the text area where it tells you what its doing, was moving from it's original state of recognizing the device.
I pulled out the device in frustration and turned it on. TADA! Something in there seemed to make it revive and actually work as a phone again. So I made sure it was charged all the time and tried to refrain from restarting the device in fear it would happen.
Well it had restarted, and things were still working fine, no big problems, nothing that wasn't fixed by a restart. Then suddenly I kept getting a lot of force closes on my SMS apps, or Phone app, as well as pretty much anything that was running on my phone started to force close, so I reset my phone.
Bam. Everything has hit the fan now.
My phone turned on and all I had was an Applications button in my single menu window. No phone, no sms, no settings or anything. When i clicked it, it would force close. On my phones first window, it would show "YouTube", "Calculator" and 3 other apps, which I never used.
Ever since then my phone has been a brick to me, with no connectivity to Odin, and no random working resets.
I've tried almost everything I've read here, and my biggest problem is that it's not connecting to Odin properly.
So please, what can I do to fix my phone without having to go pay to get it fixed. Bell said they would charge me $35 to even send it out and then charge me on top of that to fix it.
so no one has any idea what i'm doing wrong? or has experienced similar problems?
Try to reinstall the drivers in kies.
If that don't work do download
Them from android development site.
It should work.
Try the phone in all mode you can to get the drivers to install right.
Then you can try to fix it with kies or odin.
**DamianGTO Steam kernel. 349MB Ram. 256HZ. ext2. js3 base**
Another approach
I too cannot get odin or kies (or usb mass storage) recognized on the PC. I tried for a long time and gave up.
Are you rooted or can you access the root dir? If not can you access the external SD card or market so that you can root?
Do you have clockwork mod or similar?
I can only base my experience never using odin or a pc...
If you can get into recovery mode and start using (if you do not have it already)clockworks mod (and/or steam recovery - which I highly recommend as it can access the removable sd card which is useful to load stuff on to when things go sideways see why in my post http://forum.xda-developers.com/showthread.php?t=929020 ).
Then you can flash whatever you want from the root directory or with steam from the external SD car (root dir there) no odin or pc required (directly).
Then I'd start with stock or at least a custom rom that is based on your carriers stock and go from there.
G
wastedkila said:
I'll tell you the whole story, to get your best understanding of my problem, so please read and help me if you can!
So i've had quite a few problems while trying to modify some stuff on my Android Samsung Galaxy S I9000M from Bell.
At first what I did was root my phone. Secondly I installed Darky's 5.6 Gingerbread edition, but like a dumbass I didn't understand how to install, so I dragged and dropped through the windows explorer the contents from the .zip.
Ever since I've done this, i've had non stop problems.
I've installed Odin 3.0 and the samsung drivers for my Windows 7 64bit computer, and have had the phone recognized by the Odin software when it's in recovery mode, as well as when using it as USB storage. I have never had the phone be recognized by Samsung Kies.
So after I screwed up the installation of Darky's 5.6 my phone started to act all screwed, problems like a ton of force closes, and a few missing apps. This isn't even the worst of it.
My phone started after a while to load up normally, and once I unlocked the device from it's home screen, it would immediately restart, and do it's fancy google color thing for a minute, and then load it's home screen. It would then do this automatically until I took the battery out.
One day after being fed up from hearing my dad yell at me after I just got the phone, I hooked it up to Odin got it to be recognized by my computer, and then tried to load on a new firmware. Nothing worked. There was no message saying it worked, no progress bar was moving, and nothing in the text area where it tells you what its doing, was moving from it's original state of recognizing the device.
I pulled out the device in frustration and turned it on. TADA! Something in there seemed to make it revive and actually work as a phone again. So I made sure it was charged all the time and tried to refrain from restarting the device in fear it would happen.
Well it had restarted, and things were still working fine, no big problems, nothing that wasn't fixed by a restart. Then suddenly I kept getting a lot of force closes on my SMS apps, or Phone app, as well as pretty much anything that was running on my phone started to force close, so I reset my phone.
Bam. Everything has hit the fan now.
My phone turned on and all I had was an Applications button in my single menu window. No phone, no sms, no settings or anything. When i clicked it, it would force close. On my phones first window, it would show "YouTube", "Calculator" and 3 other apps, which I never used.
Ever since then my phone has been a brick to me, with no connectivity to Odin, and no random working resets.
I've tried almost everything I've read here, and my biggest problem is that it's not connecting to Odin properly.
So please, what can I do to fix my phone without having to go pay to get it fixed. Bell said they would charge me $35 to even send it out and then charge me on top of that to fix it.
Click to expand...
Click to collapse
Hey!
I've had the EXACT same problem as you. did you try to put your phone into DOWNLOAD MODE (Close phone, then hold volume down, then home, then power) to see if it connects to odin? Also, before you do anything, make sure you turn on odin first and then select all the files you want. After thats done, then put your phone into download mode, then connect the phone to your computer thru the USB.

[Q] Error 80180083 during Update and Restore! Help!

Last night when i connected my phone to the PC through ZUNE software, i was notified i have a software update from HTC. I proceeded with the upgrade, properly following the instructions. Problem was the update stopped at 9/10, even after i waited for 20 minutes still no change (phone is still working that time).
But when i tried to do RESTORE my phone through ZUNE again (i was worried software update was not fully successful) i received an error 80180083 ("the data received was corrupt or not valid") around 70% status. It asked me to disconnect phone. Now the phone is stuck with a picture showing me to connect my phone to the pc. When i do this, it will try to do a restore again but will repeatedly fail the same as before.
Even if i do a HARD reset (power BUTTON + up&down VOLUME), i will still get the same screen showing me the picture to connect my phone to the PC. Nothing seems to correct this problem (i consulted Microsoft Answers website for this, no clear solution so far and some people submitted their phones to HTC).
Anybody recently encountered this? Let me know how you resolved this problem...
Thanks!
bluegreenwhite said:
Last night when i connected my phone to the PC through ZUNE software, i was notified i have a software update from HTC. I proceeded with the upgrade, properly following the instructions. Problem was the update stopped at 9/10, even after i waited for 20 minutes still no change (phone is still working that time).
But when i tried to do RESTORE my phone through ZUNE again (i was worried software update was not fully successful) i received an error 80180083 ("the data received was corrupt or not valid") around 70% status. It asked me to disconnect phone. Now the phone is stuck with a picture showing me to connect my phone to the pc. When i do this, it will try to do a restore again but will repeatedly fail the same as before.
Even if i do a HARD reset (power BUTTON + up&down VOLUME), i will still get the same screen showing me the picture to connect my phone to the PC. Nothing seems to correct this problem (i consulted Microsoft Answers website for this, no clear solution so far and some people submitted their phones to HTC).
Anybody recently encountered this? Let me know how you resolved this problem...
Thanks!
Click to expand...
Click to collapse
Just found this link hope its of some help to you
http://support.microsoft.com/kb/2484484
Thanks for your help but I just sent in my phone for repair. Apparently the motherboard was replaced.
When i redid my update after getting back my phone, it was definintely faster. The update was succesful!
The major difference is the amount of memory space on my phone - previously my remaining space was ard 600mb (lots of music) compared to post repair (14G). Maybe that made my previous update difficult. I think it's best to remove files before doing the update, esp when it nearing full.
Just my 2 cents...

Please help. My phone won't start

I just bought the phone and using LGmobile update. It downloaded a file about 420mB and in the process update I got a message problem communicate with your phoneme. please disconnect take phone out etc.. and turn phone on and connect.
I follow the instruction but my phone won't turn on regardless to what I do.
Please help.
Sorry wrong paste..lol ..here is right info...
Check Device Manager for the current active "COM Ports"
Boot into DOWNLOAD MODE Plug the phone into the computer without the battery inserted Hold [VOL UP + POWER] Put the battery in and wait until it vibrates or for 3 seconds Check Device Manager for a NEW "COM Port...from dark lestat post in development... make sure to thank him
Then you should be able to re LG flash
Sent from my LG-P920 using xda premium
Keep having problem PC doesn't detect phone. Unplug, remove battery etc...so frustrated. Now everytime turn phone off I have to plug power cord in order for it to turn on. How do you do factory reset?
Give this thread a try ..follow exactly ....make sure battery has a charge and is not borked...these phones seem to have battery issues. If bat is good this is the info you want..seems like a lot of work but it is what worked for me. dark lestat is very knowledgable and helpful regarding these things. Hope this helps you..
Guess I should include link...lol.
http://forum.xda-developers.com/showthread.php?p=22417769
Sent from my LG-P920 using xda premium
Follow every step but got stuck when it trying to flash and stop at 20% just like when I update using LG software. Order new battery hope fixing the problem. My first LG android phone can't return bought it on craigslist
Hopefully the battery will help...good news is if you can connect and start the flash each time it is not bricked...i have not seen this problem posted before so doubt it is hardware...does adb see it...if so i would try to wipe system and data and reflash...i would also pull sim and sd card before flash to see if that helps ?
Sent from my LG-P920 using xda premium
Replace the battery with new and same problem, my phone doesn't even read my AT&T sim card.
Any button that I can do hard reset?
I had this same problem is your phone not turning on or just not downloading the update? I bricked my phone installing the update and it can be fixed but if you having problems with the connection during update you gotta keep trying it will go through. If it wont turn on at all there is a fix.
Sent from my LG-P925 using Tapatalk 2
This is the problem:
1. I bought new phone on Craigslist running 2.2 and everything working.
2. Connect to PC and set up driver, software etc.. there is an update so I did.
3. Got stuck about 17-20% and message disconnect and re-reconnect etc.. and I did.
4. Ever since I can't t urn it on unless connect to a charger.
5. I will not read SIM card and kept saying reorganized when check on setting and mobile network.
I am stuck here cause tried so many time. Also, phone turn off with full battery charge but next morning when I turn on completely drained. I think software screw up some how during the initial upgrade. Just don't know how to fix it
OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2
As far as the update goes I eventually did get it to work. Just keep trying. I plugged it in to try again one time and it said my phone was already updated. I went and checked and sure enough it was. The visual change isn't dramatic your signal bars turn green and you get some more bloatware like a 3d game converter. The reason for this is the phone has a custom LG UI and will not adopt the gingerbread UI. Don't freak a lot of people insist its not GB but it is. There is a lot more to a OS than the user interface.
Sent from my LG-P925 using Tapatalk 2
Warranty thru LG or at&t? You mind give a little more. I didn't even know LG has a warranty in US?
Sent from my LT26i using xda premium
The warranty is through LG at&t wont do anything for you cause they will know you got it off CL. You'll need your imei and your s/n from under your battery. I wouldn't tell them you got it off CL. The only way this wont work is if the previous owner registered the phone with lg which is unlikely since they didn't even have the GB update. Call 18002430000. Again do not tell them you got it from CL. The phone is under a year old and they will do it for you. If it has to be told that it isn't yours say you had a step brother or friend give it to you. They will want a reciept but you can tell them you tossed it all and your imei Ans s/n will be enough. Also tell them it happened using their support tool. Good luck.
Sent from my LG-P925 using Tapatalk 2
PROlific666 said:
OK try this take your battery out and plug it into your computer and hold the volume down key until you hear or see your computer recognize it. It should beep a couple times. Be sure to leave your phone off this whole time. Open up your LG support tool. Once it says your connected open the customer support tab. Click on "Recovery Phone." Enter your phones info and click the check button. It should take you through the steps from there. I had the same problem and had also bought it from craigslist. The good news is even if this doesn't fix it, your phone is less than a year old and can be sent to LG for a fix or they'll send you a refurbished phone. They will want a reciept but if you don't have it just tell them you tossed it. Same for the box if you don't have that. They will do it just start getting angry if they give you the run around. I was freaking out just like you LOL. I couldn't find anything on the web and the LG lady was just as stumped as me... I just happened to try this before I sent it in and it worked. Let me know if you have any luck.
Sent from my LG-P925 using Tapatalk 2
Click to expand...
Click to collapse
I got panic and it's in local shop if they can repair it but will take it back and try. Thanks.. at least someone here tried to help me... the link flash back to stock ROM didn't work for down load so I can flash it. I even root and flash custom ROM still didn't work now I want to flash it back to stock... if you can just help me a little please
download mode: I got a little confused cause someone told me take battery out connect phone to PC and put battery back. Yours didn't mention anything about put battery back in
Yeah when I did mine it wouldn't turn on at all even when it was plugged in so I think i left my battery in and did it bc it wouldn't respond to anything. I would try to get it to recognize with the battery in but if it turns on after you do plug it in then it will need to be out. You can try to put the battery back in after the computer and the LG support tool recognizes your phone bc after it gets done it reboots. I'm not sure if the battery is needed for it to work but mine was in but you can try it multiple times with it in and out. I freaked out too I had just bought the phone off CL and plugged it in to update and it had the connection failure a couple of times and then poof nothing no vibration no boot screen nothing. The LG people tried getting me to do a hard reset and when that wouldn't work she told me I would have to send it in and that it was still under the manufacturers warranty. I was desperate to say the least so I tried all kinds of combinations. The key is to get your pc to recognize your phone while it is off. If you can do that with the battery in I would try it that way first. If you don't have the box you will need to copy down the phones info, (IMEI and S/N) which is under the battery, for the recovery phone part of the support tool. It worked for me so I hope you have some luck with it. Also I would consider waiting until the ghost call thing gets fixed before you go to gingerbread. If I had known I would have stayed with froyo until they fixed it.
Sent from my LG-P925 using Tapatalk 2
Ok I tried everything and it doesn't work. I now need to flash back to stock rOM using recovery. I need the file Thrill Stock ROM zip file and the link on forum about flash back to stock no longer working
I had the same thing happen to me. U hold down "volume down" and power button, when the phone is off and that will put it into android dfu mode. Now select factory reset and Press menu button.
Sent from my LG-P925 using xda app-developers app
Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.
Cab121 said:
Volume down for recovery and so on. Volume up for download from tool.
If your doing the recovery method that TheDarkLestat setup then your gonna need to do the software setup and drivers step by step. Assuming you have done that. Remove the battery then plug the USB in and quickly hold down the pwr, and vol UP till it vibrates then let go. Start the loader and place the battery back in while its doing its thing . Then don't touch it till its done.
Only simply way I can think of to repair a soft bricked thrill. As long as it loads to recovery or download then our phone Is fixable. You might be able to politely ask TDL to remote in and provide a fix. He was doing that for a lot of us for a while. Though if your not gonna donate for his time then don't bother lol.
Click to expand...
Click to collapse
I dont' ask for donations.
It's just courtesy.

[Q] LG Optimus 4x HD issues - help appreciated

Hi. I hope someone can help me with this one.
I have a lovely LG Optimus 4x HD, on the 3 network in the UK. Got it just under a year ago, never had any problems before.
Yesterday, the network connection disappeared and the handset said SIM not present. Googled it. Found the issue may be something to do with IMEI having deleted itself, checked settings and sure enough it said IMEI unknown, network unknown, etc.
Phone core functionality was still present at this stage, able to get online using wi-fi, etc.
Downloaded LG Suite and LG Mobile Tools to PC in an attempt to fix, ran it and it said an update was required. I ran the update. Update died at 10% or thereabouts each time and instructs me to uplug, remove battery, and try again. No matter how many times I do this, it always hangs at 10%. Phone now stuck on S/W Update screen. Will not enter Recovery mode. On removing battery and powering up again, LG logo flashes up for about half a second with none of the usual switch-on vibration before reverting to S/W Update screen. Removing battery for 15 minutes before trying to switch on again makes no difference - straight to S/W Update screen. Upgrade Repair option in LG Mobile tools makes no difference, automatically tries to run through upgrade and hangs at 10%.
I have files on the phone I would like to preserve. PC no longer recognises phone as a file storage device, only as LG USB Modem. LG Mobile Tools can "see" the device when connected via USB.
Rang LG tech support this morning. Advised to send it in for repair. However I need my phone for emergency contact for family reasons. I'm hoping against hope that there's something I can do myself at home to "unblock" this S/W Update screen "loop" or whatever it is, so I can at least get the phone into Recovery mode or something.
Has anyone come across this fault with this handset before and heard of a resolution? Handset is mainstream model, not modded, cracked, hacked or rooted in any way. Can anyone think of anything I can try today to get my beloved handset back on track or should I just wait for the repair guys? Thanks in advance.
Try downloading a KDZ and flash using fastboot commands.
Sent from my LG-P880 using Tapatalk

Lumia 710 bricked. Any help?

Ok guys,
as the title says Lumia 710 is bricked.
It had last factory update and everything was working fine. Then i had to mess with it and to try to install Rataplan V9.1.
The process was working ok. By default, bootloader was in DLOAD mode, so in order to install custom ROM i needed to upgrade to Qualcomm. I have upgraded it and installed Rataplan .nb rom to the phone with NSSPro V0.54.
This is when my problems start.
The phone starts with one long vibration followed after few seconds with one short virbtation and thats it. No screen, no system, zip!
When i try to connect it again by usb to check it with NSSPro, it always starts in NAND disk mode. It does not matter do i start it normally on power button or with volume up. Its always in NAND. And it is always stuck. While the phone is connected to USB i can see Qualcomm CDMA Technologies MSM device in device manager but it has yellow mark like the driver is not installed.
I have tried several other roms, and NSS always shows that the rom is successfully installed, but the phone (other than vibration and NAND mode) is dead.
I have also tried all the solutions i could find on the net but no help. Tried, nokia recovery tool, WP recovery tool, Chimera e.t.c. Nothing works. Now i have a problem with NSS. It keeps stucking and beeing unresponsive for every option except Custom OS flash. Whatever else i click it either says tha phone is not detected or the app stucks and shuts itself down.
Is there other tool i can try?
Can i do anything to recover this phone or did i kill it?
PLEASE HELP!!!
Well that sucks and it sucks no one has tried to help here. I'm fair with Android but too new to WP's to probably be much help. Can you pull the battery out of the phone? Might pull it and leave it out a couple minutes then retry. You also might try from a different computer in case something has gone wrong on your computer in terms of port communication or maybe even a virus of some sort. Good luck.
droidzer1 said:
Well that sucks and it sucks no one has tried to help here. I'm fair with Android but too new to WP's to probably be much help. Can you pull the battery out of the phone? Might pull it and leave it out a couple minutes then retry. You also might try from a different computer in case something has gone wrong on your computer in terms of port communication or maybe even a virus of some sort. Good luck.
Click to expand...
Click to collapse
Tried allready every solution that i could find or think of, including things You described. Nothing. I was left with no other option but to send phone to service. They have a box unit with which they should be able to recover phone.
That was 2 days ago. today is third day so i am thinking that my phone has gone beyond repair. Only thing i can do is to wait and see...
Why not...?
Why not send it in real life to a windows phone expert. There should be a place to get phones repaired But, if they say that it isn't possible for them you may have rendered your phone useless. Google should be your mighty friend in this case :crying: I wish you very good luck.

Categories

Resources