On the front of my telephone it says Xda 11s. In the device information it says;
Operator version: pdaviet.net
ROM version: 6.01.10 DVH
ROM date: 07/08/08
radio version: 1.06.00
protocol version: 1337.38
extromversion: Diamond (01)
Cpu: iNTELl(r) PXA263
speed: 400 MHz
RAM size: 128 MB
Flash size: 32 MB
Flash type chip: 2af128k3
data bUs: 32 bits
storage size: 60.30 MB
LCD: 240X320 TFT
colours: 65536
Model number: ph20b
platform: Pocket PC
My laptop's specifications are; Lenovo N500, 4 GB of memory, 2 GHz dual core, Windows 7 64 bit, conexant high definition smart audio 221, 250 GB hard disk, Windows 7 experience rating 3.5.
I put my telephone into boot loader mode, it says serial, and when I place it in the docking station it says USB.
However, when I run any of the software upgrades in Windows 7 without running in compatibility mode, it says there is the error 101 connection problem. When I run it in Compatibility mode Windows XP service Pack 2, error 103: ROM image file not found.
I have tried wm 6.5 23668WWE, and WM6.5_23409.
Any help, advice appreciated.
It's not Himalaya
It's BlueAngel
(btw, your nickname owns the world!!!!)
Related
Hello to all,
I have just purchased a used Qtek 9100 from Ebay for $163. NBD 9.3 is preinstalled on it by the seller. I have some problem while copying the files (i.e Songs, text file, vidoes, themes etc) to the built-in memory. It gives any error like "The device has either stopped responding or has been disconnected!" and the file will not copy!
I have installed Windows Vista with windows mobile device mobile 6.1. I have tested in my another pc which is windows xp with activesync is installed on it and it will work perfect with no errors!
I posted this in this http://forum.xda-developers.com/showthread.php?t=393078 link and some one told that it will be solved by upgrading/change the ROM.
But I do not know which ROM should be installed ( There are many ROM in this site). And also I do not know how to upgrade the ROM. I finded everthing in forum.xda-developers.com website but did not understand any thing.
I have installed & checked Wizard Service Tool v4.2.2 and got the info.
--------------------------------------------------------------------------
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008852681
=> Bootloaders:
IPL: 2.17.0001 (G4 device)
SPL: 2.17.0001 (G4 device)
Built on Feb 10 2006 at 11:55:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 18125.0.4.2)
ROM: 0.0
Registry AKU: .0.4.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4fb80df6 - 19.00k (0x4c00)
ee9ce08e - 9.99M (0x9fd800)
ceadaa12 - 43.24M (0x2b3e000)
eeb28aa2 - 50.88M (0x32e0000)
eeb287ee - 3.00M (0x300000)
0eb2879a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000fd23020138300e891503067f
Key Index: 2
--------------------------------------------------------------------------
but I did not understand any thing from this info. I know that I have the G4 Mobile and may be will be CID Unlocked.
I am upgrading/change my pda because I have the problem with file copying and also it is very slow. I Like to install a wm6 or wm6.1 based ROM which is best, simple and fast with best softwares.
Do I need to use hardspl or softspl to upgrade my mobile?
Please anyone help me, and Please guide me step by step.
I will be waiting......
Thanking you all
Hello,
Sorry I wrote wrong ROM version. It is NBD 9.2 installed, NOT NBD 9.3.
Thanks
Srikanth.k
alright, well, first off...you need to get a memory card for you phone, by copying files to your phones main internal memory you slow it down immensely! Secondly,you need to apply Hard-SPL to your device, and then you should be all set to upgrade it to a 6 or 6.1 ROM of your choice.
So I installed Fallout NV on my PC, but right after a few seconds of game launch, it crashes.
I have a Windows 7 Ultimate x64, and my hardware is:
Asus P5QC Motherboard - Intel Core2Duo E7300 - ATI Radeon 4850 (with latest x64 driver) - and 4 GB's of DDR2 RAM.
I've tried many of common fixes on the web, like Win XP compatibility mode, copying some DLL file... nothing worked.
Here's the problem detail on crash dialog:
Code:
Problem Event Name: APPCRASH
Application Name: FalloutNV.exe
Application Version: 1.0.0.240
Application Timestamp: 4c9808f2
Fault Module Name: FalloutNV.exe
Fault Module Version: 1.0.0.240
Fault Module Timestamp: 4c9808f2
Exception Code: c0000005
Exception Offset: 006002a5
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
On Sevenforums somebody suggested to update DirectX. And this happened:
At first it said Installed successfully. But Windows asked if the program was installed correctly. I chose to re-install using recommended settings and the installation crashed. Here's the log:
Hello
I'm using the Galaxy Note I (SHV-E160S / Galaxy Note I Korea SKT Version) fell in the Hardbricks state.
To fix the ORT-JTAG(ort-jtag.com) were purchased, according to the proposed process steps have been conducted.
with reference to the contents of youtube as progress, but is not working properly.
Screenshots have not been attached to all messages.
UniversalProgrammer Tab
CPU:
CPUID = 0x106A10E1
APQ8060
IOLevel: 1.8V
Flash:
FlashID = 0xFFFFFFFFFFFFFFF9
BlockSize = 512
PageSize = 512
Density = 0MB
OneButtonRepair Tab
Brand: Samsung
Model: SHV-E160S
After selecting the Repair button
Restore SHV-E160S Partition 0 Failed. Please check the jtag connection.
Naohmyeonseo that progress is not.
Detailed specifications are as follows:
Windows OS: Windows XP SP3 32bit / Windows 8 64bit (not working) / Windows7 SP1 32bit
I think the lack of power with the power port that can be connected by cable to the power supply was too.
I know, tried to browse all the way to progress, but the progress is not anymore.
Can I use QPST the program, such as hex files, and does not write.
Would not know why not.
I guess the problem is expected to offer a possible solution would be appreciated.
Thank you.
While running the Android Studio Setup Wizard, it concluded with this error:
Unable to install Intel® HAXM
Unknown Error
Please file a bug against Android Studio.
Please help, advise or offer suggestions.
I have been told that this error is because my computer is old or that Virtualization Technology was not enabled. I checked Virtualization Technology and found it is enabled.
Here is the information I have. And it seems that VT is Eables. So, what is next? Please advise.
Device name DESKTOP-EV0ANNJ
Processor Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz 3.50 GHz
Installed RAM 16.0 GB
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Home
Version 21H2
Installed on ?3/?2/?2021
OS build 19044.1586
Experience Windows Feature Experience Pack 120.2212.4170.0
Hello everybody!
I am trying to install ARM Linux distributions on Samsung Galaxy Book Go Laptop but unfortunately none of the attempts have been successful.
The Samsung Galaxy Book Go Laptop features a Qualcomm Snapdragon 7c Gen 2 processor (Kryo™ 468 Octa-core CPU up to 2.55 GHz);
RAM Memory 4 GB LPDDR4x Memory (On BD 4 GB);
Qualcomm® Adreno graphics card;
Internal storage 128 GB eUFS;
Windows 11 ARM Operating System.
Attempts to install Linux Distributions were with the following images:
Debian arm64, Arch arm64, Ubuntu Server arm64, Manjaro arm64.
Unfortunately, I couldn't launch the Linux installation boot screen, what happens is that simply Windows 11 ARM starts, even with Security Boot disabled in the BIOS.
Would anyone have any idea how to resolve this?
Cerberus_Tech said:
Hello everybody!
I am trying to install ARM Linux distributions on Samsung Galaxy Book Go Laptop but unfortunately none of the attempts have been successful.
The Samsung Galaxy Book Go Laptop features a Qualcomm Snapdragon 7c Gen 2 processor (Kryo™ 468 Octa-core CPU up to 2.55 GHz);
RAM Memory 4 GB LPDDR4x Memory (On BD 4 GB);
Qualcomm® Adreno graphics card;
Internal storage 128 GB eUFS;
Windows 11 ARM Operating System.
Attempts to install Linux Distributions were with the following images:
Debian arm64, Arch arm64, Ubuntu Server arm64, Manjaro arm64.
Unfortunately, I couldn't launch the Linux installation boot screen, what happens is that simply Windows 11 ARM starts, even with Security Boot disabled in the BIOS.
Would anyone have any idea how to resolve this?
Click to expand...
Click to collapse
How are you trying to boot into the installer media?? Are you pressing F8 during boot? Or going into Bios to change the Boot order?
If there is no Armbian for it, you can stop wasting your time.
I don't know if this is the correct place for it, but I somehow got a memory dump of the Tmo Galaxy Book Go 5G and wondered if it might be useful to any linux developer?