Related
Im looking for some advice/input. Im going to start running android on my HTC touch (Bell). What is the best Android rom to use? Are there many issues?
http://forum.xda-developers.com/showthread.php?t=712310
You will be happy you did...
Thanks for the response. Im actually looking at this now. I cant see any install instructions and not sure exactly what files to grab. Will it work with these steps:
Easiest Step-By-Step Android Tutorial for the Vogue (NAND Method/Internal Memory) thread?
Does it matter if I run it off the miniSD vs fully flashing my phone?
ChocBoyWonder said:
Thanks for the response. Im actually looking at this now. I cant see any install instructions and not sure exactly what files to grab. Will it work with these steps:
Easiest Step-By-Step Android Tutorial for the Vogue (NAND Method/Internal Memory) thread?
Does it matter if I run it off the miniSD vs fully flashing my phone?
Click to expand...
Click to collapse
That is a great thread to start at, it's where I first learned.
I've found that Android runs smoother while being run from the phone, not the sd card.
Those instructions should work. I have not really used them since Myn's Donut (older ROM). I dont see why not the process should be the same. I ran off SD for a while during donut days, things were slower. Running off NAND now and its a really nice experience.
It must just be me, but I haven't been able to get camera working on any Android builds. I am thinking my Sd card gets unmounted or something. Camera app starts, I can see display, then Force Closes.
I am running off sd card, I even tried partitioning cards, seems as though one of the ext2 partitions goes bad or something. If I place card in computer, one of the partitions is always corrupt?
I have re-formatted and re-partitioned 3 different cards using Gparted, always same error after installing Android system to Sd and Data to SD in install menu.
I apologize if this isn't clear, trying to explain it as best I can
WoW!
I just finished the install. Now working with Google sync to get my contacts over. I love it already and havent even done much! I may eventually install on the phone. Are the steps any different? Is there a thread to get setup?
Thanks for all the responses.
Go with Incubus26Jc's Super Froyo build on NAND I've been using for a month now and its been awesome hardly any problems
New G1 owner. Purchased this:
hxxp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rt=nc&nma=true&item=150522897074&si=ja459pNCCg3NN1jod0njqPzl3JI%253D&viewitem=&sspagename=ADME:X:RTQ:US:1123#ht_500wt_1156
No clue what it's running for Recovery though but I'm assuming the CM6 rom comes with one? I'm waiting for a response from the seller.
Now I want to buy a new 32GB Class 6 SDHC card for use with this particular phone. But I've noticed that partitioning the card is an important step during the installation of said ROM? How would I go about partitioning this new card without bricking my phone? I don't need any of the files off the new card since the seller mentioned that he had cleared it. What should I partition the card too? I've heard anywhere from 512MB to 1.5GB?
What are some applications that I should be aware of for this particular ROM? I'm very new to all of this and want to keep the phone running decently well. I've heard something about an application with the ability to run apps off the SD card to preserve memory? Would installing such a program be simple for someone as noobish as me? Or should I keep it simple and just install everything onto the phone?
Ok. Well first off you have a lot of reading to do. Hope you like to read. I can tell you that partitioning your sdcard is done through recovery mode. You need to get in there first. Also cm6 is a rom. It does not come with a recovery. That is totally different. It would be good to know what version you have. I assume amon ra 1.7.0 but it will tell you on the recovery screen. What values you set it to are up to you but you can just leave the values alone when your doing it and it will give you a starting point. The rom will tell you how to save your apps 2 sd. You have to read the first post to find that info out. Good luck and welcome to xda
now I realize I'll prolly get the lynch mob soon after i post this... being that all the research is over in the dev section, but my question is fairly complicated and i cant seem to find a direct answer from my own reading.
now i have root on my NC and i would love to put a custom recovery/rom on my NC. could any one point me in the right direction to get me started loading a custom recovery? i dont want to run froyo off of an SD card i would love to have it just be a giant version of my phone(I'm sorry if that's asking to much)
i learned and pushed myself to do it a while back on my EVO 4g when i saw there was a rom with wimax capability's and that was my first time rooting anything. I do on the other hand work as a sprint instore service and repair tech. so all of this reading isnt completely lost on me.
and my second question. when i booted my nook back up after i let the battery die, all my setting and apps were gone. any one know anything about it?
thank you for any answer, and I'm very sorry about my spelling and grammar, i know it sucks >.<
i think my biggest confusion/hangup so far has been the custom recovery not sure if i have this right or not but. these are the steps (i think) i need to take.
1. aquire root. [check]
2.custom recovery.[?]
3.custom kernel.[?]
4. custom rom.[?]
So what you want to do is flash a custom rom? You would just download a CWM sd card image. Burn that image to your SD card. Then, grab the rom you want, such as nookie-froyo, or whatever. Copy that zip to the SD card.
Put the SD card into your nook, then reboot. It should boot into CWR and from there you can just flash the zip. The same thing with a custom kernel, just copy the zip onto your CWM sd card, reboot, and flash the zip.
I'm not sure if that is what you are asking, though.
I've actually figured it all out finally. is there any way to see what my CPU is running at?
The speed of your NC can be done by downloading 2 free apps in the market:
Linpack for Android
Quadrant Standard
The Linpack app will tell you how many MFLOPS (Millions of Floating Point Operations Per Second) and Quadrant will give you a score to benchmark for CPU, I/O, and graphics. They will also give you as a reference how you compare to other devices.
claudius753 said:
So what you want to do is flash a custom rom? You would just download a CWM sd card image. Burn that image to your SD card. Then, grab the rom you want, such as nookie-froyo, or whatever. Copy that zip to the SD card.
Put the SD card into your nook, then reboot. It should boot into CWR and from there you can just flash the zip. The same thing with a custom kernel, just copy the zip onto your CWM sd card, reboot, and flash the zip.
I'm not sure if that is what you are asking, though.
Click to expand...
Click to collapse
So I'm new to Nook. In fact it's still being shipped for the wife, lol. Little that she knows, it's getting nootered before it even gets in her hands.
I've rooted phones and flashed custom ROMs.
From what you're saying above, does CWM reside solely on the SD card? That's different than a mobile phone. So any time we need to install a custom ROM (even the first time), we'd have to boot using the SD Card that has CWM, right? Of course I'd have to root the nook first.
following should really go into a different thread:
So whats the best ROM? So many out there. I just want to be able to use all google apps and market (for kindle app).
Thanks in advance.
jackal424 said:
From what you're saying above, does CWM reside solely on the SD card? That's different than a mobile phone. So any time we need to install a custom ROM (even the first time), we'd have to boot using the SD Card that has CWM, right? Of course I'd have to root the nook first.
Click to expand...
Click to collapse
You can still install Clockwork from the market and it'll run of the NC without an SD card. I've done it. But for the installation of CM7 (something to do with EXT4? I don't even know what that means...) CWM on an SD was necessary.
On what the best ROM is. Well, looking in the general section subsection here it looks like a lot of people are on rooted stock 1.1. I tried Froyo and it was cool and all, but I missed having the full 8GB of storage on the nook. I haven't tried Honeycomb yet, so no idea on that one. I currently have CM7 nightly 8 on my NC and really like it. I may not have all the storage space still (they're working on it) but it's snappy and sleek.
I just got my Nook Color and am looking into how to go about rooting it for CM7. I checked out CM's Wiki page on it here and it mentioned using uNooter. I haven't read about this tool anywhere else and Google searches for it turn up practically nothing. Is this not the right tool to use? The forums mostly seem to mention ManualNooter, Auto-Nooter, etc. Also is it possible to flash CM7 on the internal memory and avoid using an SD card altogether?
Never heard of unooter and I've been reading theses forums since December. Auto mooter was to root the older firmware 1.0 ,1.01,and 1.1. Manualnooter is for the newer froyo firmware.
Rooting stock is not required to install CM7.
You simply need to create a Clockworkmod recovery microSD card and you can then flash CM7 (which is pre-rooted) from Clockworkmod.
martian21 said:
Rooting stock is not required to install CM7.
You simply need to create a Clockworkmod recovery microSD card and you can then flash CM7 (which is pre-rooted) from Clockworkmod.
Click to expand...
Click to collapse
Thanks. I figured this would be relatively easy compared to rooting and putting CM7 on my EVO but reading on here there seemed to be a few different approaches. Will that method allow me to flash CM7 to the eMMC, and after that point will I no longer need the SD card to boot? I ask because I don't have a card on hand and am considering backing up the contents from my phone's card and using that.
xdp said:
Thanks. I figured this would be relatively easy compared to rooting and putting CM7 on my EVO but reading on here there seemed to be a few different approaches. Will that method allow me to flash CM7 to the eMMC, and after that point will I no longer need the SD card to boot? I ask because I don't have a card on hand and am considering backing up the contents from my phone's card and using that.
Click to expand...
Click to collapse
Correct.
You only need the SD to install a bootable CWM then you can flash CM7 from that. After words when CM7 is installed to eMMC you are able to use Rom Manager to install CWM to eMMC as well, so everything will be set up on the device's internal memory. SD is needed only for the initial boot of CWM to install CM7.
Nburnes said:
Correct.
You only need the SD to install a bootable CWM then you can flash CM7 from that. After words when CM7 is installed to eMMC you are able to use Rom Manager to install CWM to eMMC as well, so everything will be set up on the device's internal memory. SD is needed only for the initial boot of CWM to install CM7.
Click to expand...
Click to collapse
Thanks. From reading around it seems you can't use a phone or the Nook to mount the card and write the image, so I'll have to buy a reader and might as well get a card for the Nook at the same time. Since I'll be flashing CM7 to eMMC does it really matter if I get a class 4 or above card like many suggest? I'm not sure what's in my EVO but that is my benchmark. Class 2 seems to be what comes up in searches the most.
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Sent from my NookColor using XDA App
martian21 said:
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Sent from my NookColor using XDA App
Click to expand...
Click to collapse
Transcend 8 GBs have worked beautifully on all 3 NC's in my house.
xdp said:
I just got my Nook Color and am looking into how to go about rooting it for CM7. I checked out CM's Wiki page on it here and it mentioned using uNooter. I haven't read about this tool anywhere else and Google searches for it turn up practically nothing. Is this not the right tool to use? The forums mostly seem to mention ManualNooter, Auto-Nooter, etc. Also is it possible to flash CM7 on the internal memory and avoid using an SD card altogether?
Click to expand...
Click to collapse
I was the one that put together uNooter after being contacted by the individual that maintains the CyanogenMod wiki. They wanted a universal Nooter that would only root the device, install Superuser, ADB, RomManger, and work on all versions of the NC software. They asked that it be called uNooter. It is not released anywhere else, so that is why you did not see any mention of it on a Google search.
martian21 said:
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Click to expand...
Click to collapse
That information is really only relevant to running a ROM from the SD card. If you're only using the card for storage, or to get CM7 on eMMC, manufacturer and card class don't matter.
xdp said:
Thanks. From reading around it seems you can't use a phone or the Nook to mount the card and write the image, so I'll have to buy a reader and might as well get a card for the Nook at the same time. Since I'll be flashing CM7 to eMMC does it really matter if I get a class 4 or above card like many suggest? I'm not sure what's in my EVO but that is my benchmark. Class 2 seems to be what comes up in searches the most.
Click to expand...
Click to collapse
I wrote my image over USB to a card in the NC without a card reader. I've seen wiki guides saying there's a greater chance of the write getting interrupted, rendering the card unusable at least in the short term, but it worked for me. It was only when I wanted to revert the card to storage that I ended up needing a card reader. The links in my sig have a little more info about using the NC as your card reader, but you're probably better off just grabbing one.
Also, while CM7 does not require an SD card, many apps do. Your experience will be somewhat limited without one.
GMPOWER said:
I was the one that put together uNooter after being contacted by the individual that maintains the CyanogenMod wiki. They wanted a universal Nooter that would only root the device, install Superuser, ADB, RomManger, and work on all versions of the NC software. They asked that it be called uNooter. It is not released anywhere else, so that is why you did not see any mention of it on a Google search.
Click to expand...
Click to collapse
Great to hear directly from the source, thanks! I'm surprised more people don't point to your tool on the forums given that it's right on the CM Wiki. At this point I'm a little confused about the various approaches to do this. Does your tool install ROM Manager directly into the stock Nook interface, and then I flash from there, versus booting CWM off the SD as people mentioned earlier in the thread? Sorry if that's completely off-base.
Taosaur said:
That information is really only relevant to running a ROM from the SD card. If you're only using the card for storage, or to get CM7 on eMMC, manufacturer and card class don't matter.
I wrote my image over USB to a card in the NC without a card reader. I've seen wiki guides saying there's a greater chance of the write getting interrupted, rendering the card unusable at least in the short term, but it worked for me. It was only when I wanted to revert the card to storage that I ended up needing a card reader. The links in my sig have a little more info about using the NC as your card reader, but you're probably better off just grabbing one.
Also, while CM7 does not require an SD card, many apps do. Your experience will be somewhat limited without one.
Click to expand...
Click to collapse
Yeah, I thought about this as well and figured I'd want a full-time card for the device so I ordered a card with SD adapter. I figured the specs didn't matter at all for a data card but picked up a class 4 Sandisk anyway.
xdp said:
Great to hear directly from the source, thanks! I'm surprised more people don't point to your tool on the forums given that it's right on the CM Wiki. At this point I'm a little confused about the various approaches to do this. Does your tool install ROM Manager directly into the stock Nook interface, and then I flash from there, versus booting CWM off the SD as people mentioned earlier in the thread? Sorry if that's completely off-base.
Click to expand...
Click to collapse
I received notice this past Monday that the cleaned up version of the CyanogenMod wiki was online, so not a whole lot of exposure for people to talk about it. I believe the old wiki had listed the different Auto-Nooter and Manual-Nooter that went with each software version, thus taking up a lot of space and confusion. AN and MN are more tailored to people that want to stick with the stock software, but enable full Android Market access. People that want to go from stock to CyanogenMod don’t need all the extra software that is bundled with AN and MN just to be able to flash CyanogenMod. By eliminating all the version specific software I was able to create a version that would work on all current, and hopefully future, software versions.
Yes, my versions will install Rom Manager directly into the interface. You would then allow Rom Manger to install CWM Recovery, and then you can download and install CyanogenMod from the device. You could also take a full backup of your current stock rom. Using uNooter or bootable CWM will both get you to where you want to go, it is really up to you on how you want to get there.
Instructions for installing CM7 to the eMMC using CWM on a SD card (which can later be reformatted for storage) is in this thread: http://forum.xda-developers.com/showthread.php?t=1030227.
GMPOWER and bigbob23: Thanks for the info, that was exactly what I needed to clear everything up. I suppose backing up the stock ROM would be useful in case I ever needed to restore it for warranty purposes or anything. I'm not sure which approach I'll go with, my SD card came today so I'll be reading over both techniques and giving one a shot!
Thanks again.
I went through the process with uNooter as outlined on the CM Wiki and it went perfectly. The only thing was I had to use SD Formatter and the earliest 0.1 version of Win32 Disk Imager to get the image to write to the SD card. Not sure if that problem is specific to Win7 64-bit but maybe I can mention it on the wiki.
xdp said:
I went through the process with uNooter as outlined on the CM Wiki and it went perfectly. The only thing was I had to use SD Formatter and the earliest 0.1 version of Win32 Disk Imager to get the image to write to the SD card. Not sure if that problem is specific to Win7 64-bit but maybe I can mention it on the wiki.
Click to expand...
Click to collapse
I am glad that you got everything to work right. I think the problems that you might have experienced are more associated with win7 x64. My replacement laptop with win7 x64 will not be here for another two weeks for me to test it on, but in the past I have had to use Unlocker almost every time to unlock the usb drive before I could proceed with flashing using Win32 disk imager. On my current windows 7 x86 setup, I have yet had to use Unlocker to be able to flash an image with the win32 program. HERE is a post with people having problems in the past with win32 disk imager on win7 x64, they took the same path that you did with Panasonic SD Card Formatter to fix it.
uNooter
I guess this worked for the latest firmware of 1.2.0? (I am about to root one soon!) thanks in advance!)
AF9210 said:
I guess this worked for the latest firmware of 1.2.0? (I am about to root one soon!) thanks in advance!)
Click to expand...
Click to collapse
I just got my nook last week so I'm assuming I had the latest factory firmware when rooting, but I didn't check.
xdp said:
I just got my nook last week so I'm assuming I had the latest factory firmware when rooting, but I didn't check.
Click to expand...
Click to collapse
If you see "Read Forever" when booting (stock) then "Yes" you have the latest firmware.
ADB after uNooter?
Above, GMPOWER mentioned ADB as one of the items uNooter installed. I've rooted with uNooter in part because *nothing* *else* I could find would actually boot on my NC and in part because I liked the idea of a relatively minimal root. I figured I could then push any apk's I wanted to add with adb.
Unfortunately, that doesn't seem to be working. I used "NookColor Tools -> All Settings -> Development" to enable USB debugging, but 'adb devices' shows nothing. If I plug in my G2 with CM7, adb finds it just fine, so I'm pretty sure I've got the computer side of things working. Any hints about getting the NC to play nice?
Hi all,
After reading all the great stuff about the NC recently, CM7, Phiremod and the honeycomb releases Ive convinced a mate of mine in California who's visting the UK to bring me one over to tinker with..
Now.. After doing some research Im overwhelmed with info and thought Id ask for "up to date" pointers..
1. Is there a straightforward guide to rooting and installing the NC, as I live in the UK Im not fussed about the original NC rom. I've seen Cyanogenmods wiki entry http://wiki.cyanogenmod.com/wiki/Barnes_&_Noble_Nook_Color:_Full_Update_Guide is this the best approach?
2. Which rom is best? Plain CM7, Phiremod or Honeycomb as posted by deeper blue?
3. Any other pointers?
Sorry for such basic questions, im just overloaded and not 100% sure which is the best process to take.
thanks all in advance
Angelo
Take a look in the stickies, there are comprehensive guides to root....just make sure you're using the correct version. If your mate is buying a brand new one for you, you'll most likely need the version for rooting with partitions. I have used all 3 of the roms you mentioned and my personal preference is CM. Phiremod is just a heavily themed version of CM and the honeycomb build is ok, but it lacks some features and is still a bit buggy because the source code has not been released for honeycomb
Sent from my DROIDX using XDA Premium App
If you decide on CM7 (which I personally recommend), I would look for "How to Install CynaogenMod 7 on the Nook Color" (can't post links) on YouTube. I personally found it very useful. If something seems off, make sure you look at the description and read some user comments. With the way this guy explains it it's practically idiot proof and it's unlikely you'll mess anything up.
thanks
Thanks Guys,
I've been doing more reading and yeah looks straightforward..
Considering Im not interested in the core B&N OS, I was thinking of installing CM7 to the internal memory and then perhaps installing Honeycomb (deeperblue version) on a memory stick to "play with".
From what I can tell the HC port is nice as a toy but not robust enough considering HC hasnt been released to AOSP.
Makes sense?
If you are looking to 'play with' honeycomb on a MicroSD install, check out http://forum.xda-developers.com/showthread.php?t=1045018
You get Honeycomb and Phiremod in a dual-boot image tailored for a MicroSD install.
Read through the thread and see if it's to your taste.
For the most usable ROM, go with CM7. Just follow this guide in this post. Very simple.
http://forum.xda-developers.com/showthread.php?t=1030227
The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post.
After you get this running, you can read up a little more and create a SD card w/ Honeycomb or Phiremod to play around with. But CM7 is the most stable out there (well, I guess Phiremod is good to, because it is a customized CM7).
Good Luck.
Use CM7, it's the best for now.
HC is beauty but still a lot of work to be done.
jasoraso said:
For the most usable ROM, go with CM7. Just follow this guide in this post. Very simple.
http://forum.xda-developers.com/showthread.php?t=1030227
The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post.
After you get this running, you can read up a little more and create a SD card w/ Honeycomb or Phiremod to play around with. But CM7 is the most stable out there (well, I guess Phiremod is good to, because it is a customized CM7).
Good Luck.
Click to expand...
Click to collapse
+1 for this guide!
"The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post."
For some reason I thought that statement was obsoleted, am I wrong?
It was valid if you have v1.2 NC and flashing with CwM Recovery prior to v3.2.xx.
But since the instructions do indicate using v3.2.0.1 CwM, then why care about blue-dot or not since it has been taken care off unless v3.2.x.x not properly does the job.
Maybe because you have a choice in partition schemes?
You really will want to repartition the new nook. 1 gb is a very small partition for your programs. 5gb works much better and the change is fairly painless.
Sent from my NexusOne using Tapatalk
IFLATLINEI said:
Maybe because you have a choice in partition schemes?
Click to expand...
Click to collapse
That's a reasonable reason but again, it shouldn't be highlighted in RED, ORANGE at best
In fact, since it's a choice of good, it should be in GREEN.
thanks guys
Thanks guys, Im in awe with all the feedback and comments this thread is getting..
yes, Ive received the NC today and its charging Also doing loads and loads of reading
My nook does have a bluedot so my partitions are 5gb Data/1Gb Media.
I'll probably leave it like so, considering CWM supports this now its ok, and put most of my media on an external 16gb microsd card..
If Im right I can still install apps into the 5gb partition right?
Also , if I understand it correctly I can actually install CM7 onto a microSD and simply boot from this right ,without rooting/installing CWM... ?
Angelo
asantaga said:
If Im right I can still install apps into the 5gb partition right?
Also , if I understand it correctly I can actually install CM7 onto a microSD and simply boot from this right ,without rooting/installing CWM... ?
Angelo
Click to expand...
Click to collapse
You can still install apps into the /data partition but pls note: if your NC isn't rooted, you can only install apps that offered by B&N. You do not have full access of Android Market.
About CM7, yes, you can run CM7 off uSD and not touching the eMMC (aka internal memory) at all. Be considered getting a Sandisk (class 2 or class 4)
B-i-g thanks
All,
BIG Thanks to everyone,
I've successfully (actually flawlessly), repartitioned my nook to the old standard and installed CM7 into the internal memory..
All flawlessly. Also ordered a sandisk 16gb memory card from amazon.co.uk, so that will hold most of the media..
I was considering making the main partition >1Gb (1.9Gb) but decided to leave it as it is for now.. It was so easy yo tweak I thought Id try it vanilla and then grow if I need to..
Awesome-ness
ok wheres my 5gb?
ok got one question now..
/media is supposed to have 5gb available..
CM7 doesnt appear to allow me to use it as a SD card.. but ive found it mounted as /mnt/emmc
How does one use it ??? I tried downloading pdfs and I was told that an SD card was required for this... :-( when i get home I was going to try mounting it via usb to a computer but is that the only way?
There are 2 things you need to know
1. If you're running CM7, you MUST have a uSD. "MUST" does seem to be a strong word but for some reason, that I still try to figure out, an external uSD is required. W/o it, you can still using it but there's some apps won't run if no uSD plugged. It means the NC works 99.9% w/o uSD. I guess I should take the "MUST" back, ehhh
2. If you're running the recently nightly-build CM7, the USB storage utitlity should already be implemented within the ROM. All you need to do is
1. Connect NC and PC via USB cable
2. by this time, the usb indicator should be appeared on the NC, tab on it
3. Tab on Connect USB to transfer .......
4. Turn USB Mass Storage on
5. by this time, PC should recognize the /media on the NOOK
6. do what you want to do
votinh said:
There are 2 things you need to know
1. If you're running CM7, you MUST have a uSD. "MUST" does seem to be a strong word but for some reason, that I still try to figure out, an external uSD is required. W/o it, you can still using it but there's some apps won't run if no uSD plugged. It means the NC works 99.9% w/o uSD. I guess I should take the "MUST" back, ehhh
2. If you're running the recently nightly-build CM7, the USB storage utitlity should already be implemented within the ROM. All you need to do is
1. Connect NC and PC via USB cable
2. by this time, the usb indicator should be appeared on the NC, tab on it
3. Tab on Connect USB to transfer .......
4. Turn USB Mass Storage on
5. by this time, PC should recognize the /media on the NOOK
6. do what you want to do
Click to expand...
Click to collapse
Wicked, yeah didnt see the little icon down below
thanks
Hey Angelo, I just wanted to share my experience.
I love gadgets, and tinkering with gadgets. I am an IT manager/minor programmer/webmaster, etc. etc... so no surprise that I feel right at home here BUT, I also love to read and I think that the Nook app for Android is bunk (e.g. "poor") compared to the stock NC experience.
I decided pretty early on that I wanted to keep the NC stock (partially due to warranty) and have a dual boot option for CM7. I had initially installed CM7 on my NC, replacing the stock rom all together. I ended up putting the stock ROM back on.
Here is a post from another thread where I outline that experience...and the guides that I use.
I talk about partitions in that post, since you have a new NC, don't even bother yourself with that...just note the guides there that will get you where you want to go, either way....
asantaga said:
ok got one question now..
/media is supposed to have 5gb available..
CM7 doesnt appear to allow me to use it as a SD card.. but ive found it mounted as /mnt/emmc
How does one use it ??? I tried downloading pdfs and I was told that an SD card was required for this... :-( when i get home I was going to try mounting it via usb to a computer but is that the only way?
Click to expand...
Click to collapse
Many (older) apps in on Android are designed to ONLY look for storage called "sdcard". So your 5gb of internal (emmc) called "Media" will not be able to be utilized by those Apps.
Apps that are better programmed and designed can access the memory called "Media".