I have a unbranded HTC HD7 T9292 with firmware version 2250.09.12302.707. Recently I updated to Windows Phone OS version 7390. Now all of a sudden, my phone hangs when starting up. It hangs displaying the HTC logo with no response. I tried removing the battery for a while and restarting it but it does not start up and hangs displaying the HTC logo.
I tried hard reset the phone as mentioned in this blog
http://www.technipages.com/htc-hd7-factory-reset.html
However nothing happens.
I then checked the CRC following showed up
BL CRC-0x3CC20DC0
OS CRC-0xFED59CF9
OS(SI) CRC-0x3959A69D
What do I do. Please help.
Thanks in advance
Looks like a problem with the microsd card. Reseat the mmc back into the slot and check if it can reboot..The mmc is located in the bottom part of the hd7, Refer this for further instructions on how to reseat the mmc..
http://forum.xda-developers.com/showthread.php?t=883582
Now after hard reset. the phone stays in bootloader mode.
I already told you how to solve in the other 3000 threads you opened....
bubbl3 said:
I already told you how to solve in the other 3000 threads you opened....
Click to expand...
Click to collapse
Thanks for counting, but flashing the ROM is not working. Like i said in other posts it stops at 0% and RUU enters into recovery mode. Then after, phone again boots in the booloader mode. Do you know by any chance how to get out of bootloader mode and then do a hard reset.
Thanks if you deserve it
Related
Hello all,
as the title says, one of my touch diamond's is stuck in bootloader screen.
I didnt do anything in between it working and not working, it was on my desk, put it there working, got it 5mins later, and it was in bootloader screen (tricolor screen).
What i've already done to try and fix it:
flash it with the original HTC rom, flash completes succesfully, phone reboots to tricolor screen, so no solution there.
install mtty and format the phone, this completes, reboot the phone, again goes to the bootloader.
reflash the phone with original rom after cleaning it with mtty, flash again completes succesfully but when it reboots after flashing it just goes to bootloader again.
Tried to flash a Hardspl: stuck at 0% and stays there. so that doesnt work.
BUT! when in mtty i give the "boot" command, it DOES start to boot WM. but then again, when i turn the phone of, and on again, or it reboots because of first start after flash, it goes to bootloader again. The VOLDOWN button is NOT stuck, cause when it boots i can use the vol buttons perfectly fine.
Anyone got an suggestion in how to unbrick it? i have a second, perfectly working diamond here too, if that helps in any way.
Some more info ive just seen in mtty, when i told it to boot, it said ONE BAD BLOCK IN CE, remove block ---- to ---- (dont know the exact numbers anymore)
hi..i had something like that...
just download this.
"RUU_Signed_1_93OliNex_HSPL_UnsignedEdition"
it's only 1.7MB and it's will make it work.. atleast it did the job for me...
Hi,
My T mobile touch diamond stuck in bootloader screen? Any experties to help me please.
Thanks in advance.
I recently tried to update HTC HD7 firmware after a hang issue. I had hard reset the phone and the phone now boots in bootloader mode. I cannot exit the bootloader mode. Also, I may have tried flashing the device with RUU_Schubert_hTC_Asia_WWE_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo
When the ROM version of the phone is 2250.09.12302.707. Now my phone is unusable. It starts in bootloader mode any attempt to flash it with other 707 ROMs RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_RELEASE fails with a update error 270: saying the ROM file is corrupt please help. My phone is unbranded.
Thanks,
Please help
The windows phone support tool 'might' be able to help you out here.
://support.microsoft.com/kb/2530409
Unfortunately as a noob to the forums I can't post links. Add http to the above to make it into a link.
I had the same problem, but i managed to solve!!!
Invert the flash order from this thread: http://forum.xda-developers.com/showthread.php?t=1000520
Flash b2 (big one) first and ignore the error then flash b1 (small one) and the phone will boot
Now guys my phone is toast. It does not work beyond the bootloader mode. I tried flashing the device but the process gets stuck at 0%. I tried formatting the SD card but the same tricolor boot screen appears. What the hell has gone wrong? Anyone who can help me thanks a million. I would really appreciate it.
did you try flashing one of these 707 roms ?
http://forum.xda-developers.com/showthread.php?t=888747&page=20
if u stuck in bootloader mode, pull out the battery , and install it back again
It could be a faulty USB port during the flash process. Try another USB port.
I'm able to flash this to any rom but it just keeps getting stuck at the htc splash screen. I tried all stock tmob roms and DeepShining's rom and always the same, hung at the splash. Any suggestions would be greatly appreciated.
Thanx in advance.
What does your screen say when you enter bootloader mode?
xdrc45 said:
What does your screen say when you enter bootloader mode?
Click to expand...
Click to collapse
Every time I was able to enter boot loader mode and flash to the appropriate bl depending on upon the rom. Even when I ran the dft xspl install and launch exe's and then loaded DeepShining rom it hung on the DS splash screen.
Update:
Turned out to be a hardware problem. Tore the phone apart and it seems the camera button was the problem.
Lol...looks like you figured it out before I could suggest that, it seems to be a problem with the hd7 camera button getting stuck and not allowing the rom flash to complete. Glad you figured it out though!
Alright, i have an extreme problem with my HTC One s. It is rooted. I was trying to flash my first ROM, but somewhere in the process i did something wrong, and it wouldnt go past the htc splash screen. I restored to my backup, but was still not able to get past the splash screen. I then accidentally hit factory reset at the hboot menu, and now my phone has no OS, the sd card gets an error mounting, and my computer wont recognize my phone. I have read ways to get past the bootloop, but they need me to connect my phone to my computer, but i cant! Can anyone help me???
Umm this is the HTC M7 forum.
hi there, I have a new HTC One on AT&T. I tried to do a soft reset, and since then now it will load with the Quietly Brilliant screen, but after that the screen is blank. It won't do anything. I tried to do a factory reset and it still does the same thing. I did notice on the bootloader screen it says my device is locked? I tried connecting it to my macbook and the HTC Sync manager says my device is locked and it is unable to recognize it, please unlock it and reconnect.
I can get into HBOOT but nothing from there seems to lead me to anything but the blank screen again (from which I can hard reset or go to the HBOOT)
I'm at a complete loss as to what I should do, please help!
darkenedaura said:
hi there, I have a new HTC One on AT&T. I tried to do a soft reset, and since then now it will load with the Quietly Brilliant screen, but after that the screen is blank. It won't do anything. I tried to do a factory reset and it still does the same thing. I did notice on the bootloader screen it says my device is locked? I tried connecting it to my macbook and the HTC Sync manager says my device is locked and it is unable to recognize it, please unlock it and reconnect.
I can get into HBOOT but nothing from there seems to lead me to anything but the blank screen again (from which I can hard reset or go to the HBOOT)
I'm at a complete loss as to what I should do, please help!
Click to expand...
Click to collapse
You can unlock the boot loader, and flash a custom rom
MacHackz said:
You can unlock the boot loader, and flash a custom rom
Click to expand...
Click to collapse
How do I unlock the boot loader?