When I plug in my Nook Color running CM7 to my computer, it just charges and doesn't go into USB mode. I don't even get a USB debugging notification, even though USB debugging is on. What can I do to fix this? Other then this one issue, I love CM7, but if I can't solve this, I may have to switch back since this is a pretty major problem for me. Thanks in advance for your help.
I installed CM7 last night. My usb is working correctly. I don't believe I changed any of the default settings.
yea, I don't know why it's happening with my NC. Would really appreciate a solution from anyone.
make sure u have the drivers
Have you followed this procedure:
nookdevs.com/NookColor_USB_ADB
Related
I recently switched from fresh 1.1 to fresh 2.0b and also the new radio flipz came out with. I love it and I cant wait for all the bugs to be out. I do have a kinda serious problem tho and need the advice of a droid/linux guru. Why is my usb connection not working anymore. I tried it on 3 cpus and no recognization. Also I used the dev tools and it says everythings fine. Some other things I have done is wiped->flashed etc. no luck and also installed the drivers. nothin. On a side note it does charge! thanks alot any advice would help!!!
When you say your USB doesn't work, what exactly do you mean? Do you mean that your device is no longer recognized?
If that is the case, try this (also, make sure usb debugging is enabled):
I have win 7 64 and here is what worked for me:
1. Uninstall HTC Driver (this will likely give you an error, you can ignore it)
2. Uninstall HTC Sync
3. Download and install PdaNet
4. Follow the directions when installing PdaNet
Yea basically the phone is connected cia usb cable. by using the app" dev tools" i can tell the phone and computer are communicating with each other but no notification by windows or phone and they will not Activsync, htc sync, or mount. Also if you boot to recovery it will add files. really odd but it seems to be a problem with alot of ppl. Preciate it im trying what u said right now I will post with results.
pjung1 said:
Yea basically the phone is connected cia usb cable. by using the app" dev tools" i can tell the phone and computer are communicating with each other but no notification by windows or phone and they will not Activsync, htc sync, or mount. Also if you boot to recovery it will add files. really odd but it seems to be a problem with alot of ppl. Preciate it im trying what u said right now I will post with results.
Click to expand...
Click to collapse
turn on USB debugging
USB debugging is most definitley on. I double triple check it every time. The uninstallation of htc sync and driver and the install of the pdanet did not work everything was fine until 2.1 and the radio. But I did wipe and reflash a second time
bump still strugglin comin guys someone has to have the answer
well the radio should have NOTHING to do with connecting via usb... try nand-ing back to a 1.5 and see if you can connect through adb again.. my $0.02
I have the same problem and I am using damage 1.0...The problem is that it no longer gives me any options when i plug in to my computer. I have been working on this for a few days, it really sucks cuz i don't have any other roms on my memcard so I am kinda screwed if I can't figure this out...maybe i will just wipe and start over. I am 100% sure this is not related to the radio whatsoever. Does anyone know how to change the default for when u plug into a computer...i have tried just going to settings/connect to pc. Ask me is checked, and disk drive is default. I am wondering if there is a default to clear in apps management.
bee976 said:
I have the same problem and I am using damage 1.0...The problem is that it no longer gives me any options when i plug in to my computer. I have been working on this for a few days, it really sucks cuz i don't have any other roms on my memcard so I am kinda screwed if I can't figure this out...maybe i will just wipe and start over. I am 100% sure this is not related to the radio whatsoever. Does anyone know how to change the default for when u plug into a computer...i have tried just going to settings/connect to pc. Ask me is checked, and disk drive is default. I am wondering if there is a default to clear in apps management.
Click to expand...
Click to collapse
Got it.
Go to Settings > Connect to PC
Choose away
pjung1 said:
I recently switched from fresh 1.1 to fresh 2.0b and also the new radio flipz came out with. I love it and I cant wait for all the bugs to be out. I do have a kinda serious problem tho and need the advice of a droid/linux guru. Why is my usb connection not working anymore. I tried it on 3 cpus and no recognization. Also I used the dev tools and it says everythings fine. Some other things I have done is wiped->flashed etc. no luck and also installed the drivers. nothin. On a side note it does charge! thanks alot any advice would help!!!
Click to expand...
Click to collapse
well if you are using disk drive you need to use usb ports build into the mobo. idk why but any usb that is not built in will give you problems. even on my laptop the usb ports that are plugged into the mobo dont work but the ones built in do. try that.
Avalaunchmods said:
well if you are using disk drive you need to use usb ports build into the mobo. idk why but any usb that is not built in will give you problems. even on my laptop the usb ports that are plugged into the mobo dont work but the ones built in do. try that.
Click to expand...
Click to collapse
I am not sure what u mean by mobo? but it worked on the same usb's when i first flashed, i typically use the exact same usb for everything...i have 4 ports built into my laptop and none of them work for the phone. i even tried reinstalling drivers and htc sync...idk, i just wiped, and then restored and still no go, i guess i will try a wipe w/o restore.
If you're on a desktop, he means plug the cable into the USB ports on the back of the computer chassis. The USB ports there are soldered directly onto the motherboard, where as USB ports on the computer chassis are connected by a cable to the USB headers on the motherboard. What he's saying is that the cable could've been damaged/fried/came loose, so try the ones in the back.
mrinehart93 said:
If you're on a desktop, he means plug the cable into the USB ports on the back of the computer chassis. The USB ports there are soldered directly onto the motherboard, where as USB ports on the computer chassis are connected by a cable to the USB headers on the motherboard. What he's saying is that the cable could've been damaged/fried/came loose, so try the ones in the back.
Click to expand...
Click to collapse
OiC, that isn't the problem I have tried multiple ports on all of my computers(all laptops) as well as multiple cords...idk FML, just reflashed will see if it works.
ok so i just wiped and reflashed, now i am stuck at the X loading screen and the phone is frozen...FML, is it bricked, i can still get into recovery, i have the old fresh 1.1 ROM on my card, should i just flash that, or should i just use the nandroid backup i made from stock?
ok so flashed back to stock and my computer still won't recognize my phone...any other ideas, it has to be the computer right?
bee976 said:
ok so flashed back to stock and my computer still won't recognize my phone...any other ideas, it has to be the computer right?
Click to expand...
Click to collapse
unless your phone won't charge plugged into the wall (meaning it's your phone), then yes.
Did u check with changing the cord ??
I had a similar problem after upgrading radio & fresh 2.0b. I just changed the USB cable and it worked fine. Even now it doesnt yet work with the earlier cable. Something went wrong in that front, but a diff usb cable did the trick for me. try it out
i have changed 5 cords. have messed with every setting known to man after doing so wiped and reflashed. everything i have used every usb port 1.0 and 2.0 and my phone most definitly charges ( my phones never been so charged) i am a comp prog going on my mis degree im pretty good at this and know my stuff Im just wonndering 2 things is it phone or cpu? reason I keep being so indecisive is because comp will recognize a device when it is in heroc but wont verify its a hero( ive tried all drivers) but phone connected fine b4 2.0 i duno im all out of ideas im gonna try to install the new heroc .6 and hope for the best thanks for the input guys!!!
Hey Guys,
I am having a vexing problem with my rooted NC. All of a sudden, after 5 great days of rooted goodness my NC will not sync up with my PC at all, not as itself or as a mass storage device. Moments before this happened, I had downloaded some pdf magazines through Calibre and several moments before I had installed the RepliGo pdf reader app from the market. I have deleted the two magazines, rebooted both my nook and computer several times, tried all of my pc's usb ports, unchecked the usb auto mount, the re checked and nothing I have tried has worked. Everything else is working great and I can load files on to the sd card through my PC and they are recognized just fine after I re-install the card. Also, when I plug my cord in to the nook linked to the PC it starts charging just fine.
Any help would be appreciated.
OK, let's start with a dumb question. My NC can be fickle...sometimes when I connect USB, it automatically mounts, other times it takes a while. One thing is for sure...I get nothing unless I look at the screen, and make sure it's unlocked (swiped past the lock screen). Have you made sure to do that?
Sorry if that's an idiotic question.
-Matt
Thanks for the quick reply. Each time I plugged in my nook after I made some change I was sure to unlock to confirm that I was still having the same problem. Also, when looking in the device manager I doesn't seem to acknowledge that a new device has been plugged in which makes me thing something is going on with me nook.
Next question...have you tried a few different USB cables? Also, I'm on my second (soon to be third) Nook. The first had a USB port that appeared to have minor internal damage. When you plug in the USB does it go in smoothly, or does it take a few tries? If the latter you may have port issues.
-Matt
I haven't yet, but I plan on bringing the cord to a B&N close to my work tomorrow to see if that is the problem. Is there somewhere that I can get the nook color usb drivers? I have seen a link on nook devs but it is in the context of using adb so I don't know if it would apply to this situation.
Thanks
Jon
I get this too. Got my cable replaced at B&N today. Haven't tried it on my computer yet though. When I connected mine to my MacBook, it will say that the nook is drawing too much power and then disables my USB port. Annoying.
Sent from my XDA app on my Nook Color
I was going to mention reinstalling the drivers, but you noted that it isn't showing up in device manager. But I wonder...take a look at:
http://nookdevs.com/NookColor_USB_ADB
In particular, this might be helpful:
If you did not succeed, identify each nook entry in device manager (each device with a Hardware ID of USB\VID_2080&..., right click and uninstall it. There may be several. Uninstall all of them. Unplug the nookColor, replug it, and restart from Section III.
Click to expand...
Click to collapse
-Matt
So I would need to do all of the steps on the aforementioned nook devs site in order to reinstall the drivers. Also, in the device manager I looked at all the usb devices and did not find the right information to indicate the nook was attached.
Thanks for all of the help
Jon
I've been having USB driver issues for a while now with my captivate (On serendipity 4.2 right now, finally decided to try to get to the root of this issue and update); I've used the SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe (and I am on 32 bit Windows XP SP3), and have always received a "USB Device has malfunctioned" message whenever I have tried to plug my Captivate in.
My computer has 2 USB Ports; one of them has a USB 1.0 hub plugged in (which has a keyboard & Plantronics Microphone plugged in as well) and the other has a Logitech mouse. I've tried both of the main USB ports, as well as the hub. The hub's been plugged in when installing and uninstalling (I'm trying to give as many details as possible in the hopes that one of these might trigger a red flag).
Anybody know what the problem might be? Maybe I've been uninstalling the drivers incorrectly? (I've done it through device manager & restarting the computer before reinstalling)
EDIT: No Kies on this computer, has never been installed; I have been mounting the device via the notifications menu but it still gives me a malfunction error.
Hmmm.. You've done everything that I would try as well...
At this stage I can't really say it's anything specific... Have you tried it on any other computers by any chance? Or got it working before?
venomio said:
Hmmm.. You've done everything that I would try as well...
At this stage I can't really say it's anything specific... Have you tried it on any other computers by any chance? Or got it working before?
Click to expand...
Click to collapse
Should mention that I got it working by turning on USB Debugging mode on after installing the drivers, then plugging the device in, and after that it began to function as normally.
So is it working now or not? Sorry, the latest post is a bit confusing...
I think that's a known issue. I usually can not get my computer to recognize my captivate without enabling debugging
Sent from my SGH-I897 using XDA App
venomio said:
So is it working now or not? Sorry, the latest post is a bit confusing...
Click to expand...
Click to collapse
Yes, it is working 100% as it should be.
This may be a noob question and I hope there is a simple solution, but I couldn't find anyone with the same problem.
I just got a NC yesterday and used eyeballer's guide to install CM7, without the OC kernel. Installation went fine and now I'm running CM7, and everything appears fine, except for USB.
If I connect the USB cable, Windows 7 recognizes that NC is connected to it, and the NC batter starts charging, but there is no screen on the NC saying "USB mode" or whatever it is supposed to say, and I can't access the NC's data on my PC either.
Nevermind. NookColorUMS worked. Since I don't know what I'm doing it took a while to get it installed and figure it out.
What is NookColorUMS??
Hi first of all my phone is rooted and i have had no problems connecting usb to pc for awhile. I havent hooked it up to a computer in about a month. One day i tried and nothing happened on my phone or pc besides starting a charge. I have tried everything i can think of. I read something about modem settings and tried calling like 4 of them to change and none of them worked. I really want to figure this out but im out of options and writing this seems like my last resort. Iam very familiar with phones and roms and rooting installing rom ect. This just blows my mind.
Did you install the Samsung USB driver, maybe try a different cord also.
Sent from my SM-N910T using Tapatalk
It's almost for sure driver issue, I'm guessing windows 8.1 ?
Do you have USB Debugging enabled in Developer Options?
Thanks everyone. It turns out it was my phone connector. It was bad and I got it warranted. I knew it wasn't me