This is the new Stock Rom that is available in some country's including Denmark.
This doesn't include the new baseband as Paul O'Brien will release that tomorrow.
Instructions:
Drivers for NVFlash can be found here: http://android.modaco.com/content/l...lash-setup-instructions-drivers-links-active/
You can skip step 1 in that guide as the NVflash util is included in the download with the ROM.
Rest is taken from Paul O'Briens post:
* Download the ROM file below
* Download driver from djmcnz post that i linked to (Edited a bit this step)
* Turn device off, remove battery, plug device in while holding volume up and down - screen will stay black but Windows will add a new 'APX' devices
* Install drivers extracted from driver file download
* Run 'flash.bat' from ROM file download
* Wait for flash to complete and device to reboot
Download link: http://www.multiupload.com/KLGZ3OUQF4
MD5 Checksum: 918e5d2dd40ad0bc95282ac29b5ac11f
And yes i have tested that this works on my phone.
Credit to djmcnz and Paul O'Brien for guide and drivers
Good to have it but afaik Paul‘s FR ROMs are better
Sent from my LG-P990 using XDA App
How is the battery life on this version?
Better than earlier date stock firmwares?
Related
I'm please to make the latest (*at time of writing) LG 2X baseband release available for your use in SmartFlash format. You can check your current baseband in your device's 'About' page.
Please note that you use this at your own risk!
Installing this file WILL fully wipe your device, including the Internal SD. Back up!
SmartFlash for P990 is for use on Windows PCs.
To use P990 flash to flash this baseband:
Download the utility file below
Download the driver file below
Download the baseband file below
Run the SmartFlashTool_P990.exe application on your PC
Turn device off, remove battery, plug device in while holding volume down - you should see a software update message on screen and the COM port should be filled automatically in the flash application below after installing the drivers if required.
Select the 'ROM Copy D/L' tab
Ensure 'Normal Mode' is selected
Ensure 'Erase CAL' is NOT selected
Click the browse button next to 'CP Bin:' and select the baseband (FLS) file
Click 'Start' and wait for the flash to complete
The all important files...
SmartFlash P990 - DOWNLOAD (Mediafire Pro) - MD5: fe350443518c98f7e089fac48fa36be3
SmartFlash drivers - DOWNLOAD (Mediafire Pro) - MD5: 70ebd70389c0e3011d4d6b4434f8458a
[*]Baseband 1035.21_20110614 - DOWNLOAD (Mediafire Pro) - MD5: 8a5e3fc28333774c9ee8f7af6737f684
Baseband 1035.21_20110606 - DOWNLOAD (Mediafire Pro) - MD5: bbffa6a6e36af5750cda0d3ef90b3af0
Baseband 1035.21_20110502 (from LG U660 10S update) - DOWNLOAD (Mediafire Pro) - MD5: d7975ee80189c5933ce99e17fc8cc240
Baseband 1035.21_20110405 - DOWNLOAD (Mediafire Pro) - MD5: 599fb242c0224894b1ad2eb004586527 (thanks for the file you-know-who!)
Baseband 1035.21_20110315 - DOWNLOAD (Mediafire Pro) - MD5: 9b6f600cfa9f528595e5106305770448
Enjoy!
P
I'll try it coming from 20110302.
Thank's
just tried this, it worked! I previously had baseband dated 23februari, and had very bad call quality sometimes. I will test if it's any better now...
Maybe worth to mention, but if you flash this baseband your phone gets a hard reset, so you will loose all your settings and apps!
yup works nicely, didnt wipe the internal SD though... in fact I was hoping it did...
Great job! works nicely! looking forward for new updates!
Thanks a lot.
Nandroid backup/flashed baseband/restored nandroid
All works perfect
Sent from my LG-P990 using XDA App
20110302 is better of 20110315 in quality of the speaker sound?
Any way to update baseband without resetting the phone to factory setting?
Or to flash the radio drivers via CWM
i make a nandroid backup, after installated the radio and restore the backup
all perfect
Error
Followed the instructions, but only got to this part:
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :PSI RAM writing start
00:12.0 Sec :Timeout error is occured
00:12.0 Sec :error!
edit: fixed itself
i've a problem...
when connect the phone, he find the first , but the second and third driver continue to installation and not find them.
fixes the bad call quality
now it sounds great
My first post here on the forum (which btw is a really great one)
Just wanted to thank the author of the thread for an awesome update and an easy guide. I had problems with really poor call quality - like hearing someone talking into a can with lots and lots of amplification. After the update my phone (..0223 baseband) became normal so no more asking the caller to repeat them self 2-3 times.
Thanks again.
///M
hello does it need root?? Will improve also the battery?
thx
alexrax said:
hello does it need root?? Will improve also the battery?
thx
Click to expand...
Click to collapse
No root required, although it will restore your phone to factory default meaning you'll be loosing data - so get a backup, maybe even root and then backup.
///M
Wrong md5 checksum
I'm getting the wrong md5 checksums for SmartFlash drivers and the Baseband 1035.21_20110315. I tried downloading several times with no luck. How can i make i work?
allandroid said:
I'm getting the wrong md5 checksums for SmartFlash drivers and the Baseband 1035.21_20110315. I tried downloading several times with no luck. How can i make i work?
Click to expand...
Click to collapse
Weird. That was not a problem here.
allandroid said:
I'm getting the wrong md5 checksums for SmartFlash drivers and the Baseband 1035.21_20110315. I tried downloading several times with no luck. How can i make i work?
Click to expand...
Click to collapse
http://android.modaco.com/index.php?s=&showtopic=335494&view=findpost&p=1647191
@opusheks
What's your point? I see the similar problem but not the solution?
djmcnz writes: "Mine is also: 9B6F600CFA9F528595E5106305770448
And it failed halfway though and has broken my radio. I now have baseband ver: "unknown" and no radio function at all."
I really don't want to experience that.
Maybe someone could upload the files again with the correct md5 checksum?
I got the same result as djmcnz, and it worked just fine...
Just ask Paul on the Modaco board to post the sums again to be sure.
Hi guys!
I got a little question. I do have ClockworkMod Recovery and my device is rooted.
Running stock at the moment as awaiting any news ergarding cm7.
I have seen the post regarding the radio baseband. I have seen many users have flashed it on theiers 02x`s but I`m not sure if this update apply to uk version. My current one running Baseband 1035.21_20110315. The update version is Baseband 1035.21_20110405 that apparently improves radio and signal performance.
I did try to flash the radio on mine with smartflash, did nandroid backup, flashed the baseband, did nandroid backup and my phone didn`t boot. It got stuck on lg loading bar and that`s it. I did try to flash it back to stock but it didn`t help.. Had to returned my phone for new one
Do you guys in uk have any luck with flashing new baseband? Should we? My signal on vodafone reallly sucks.. And battery very poor so far but I just did second charge..
That baseband is for all regions, however it also requires an updated RIL. Do a search for that either here or on MoDaCo.
Sent from my LG-P990
Thanks for prompt replay,
So far I found:
SmartFlash for P990 is for use on Windows PCs.
To use P990 flash to flash this baseband:
Download the utility file below
Download the driver file below
Download the baseband file below
Run the SmartFlashTool_P990.exe application on your PC
Turn device off, remove battery, plug device in while holding volume down - you should see a software update message on screen and the COM port should be filled automatically in the flash application below after installing the drivers if required.
Select the 'ROM Copy D/L' tab
Ensure 'Normal Mode' is selected
Ensure 'Erase CAL' is NOT selected
Click the browse button next to 'CP Bin:' and select the baseband (FLS) file
Click 'Start' and wait for the flash to complete
The all important files...
SmartFlash P990 - DOWNLOAD (http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110315/) (ROMraid Load Balancing) - MD5: fe350443518c98f7e089fac48fa36be3
SmartFlash drivers - DOWNLOAD (http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110315/) (ROMraid Load Balancing) - MD5: 70ebd70389c0e3011d4d6b4434f8458a
Baseband 1035.21_20110405 - DOWNLOAD (http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110315/) (ROMraid Load Balancing) - MD5: 599fb242c0224894b1ad2eb004586527 (thanks for the file you-know-who!)
Baseband 1035.21_20110315 - DOWNLOAD (http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110315/) (ROMraid Load Balancing) - MD5: 9b6f600cfa9f528595e5106305770448
They do not mention anything about flashing RIL.
I found this one http://android.modaco.com/content/l...r-r1-stock-patch-pack-updated-ril-1301920892/
Is there any chance you could help me with that please?
As I see it is:
1. nandroid backup
2. Flash baseband with SmartFlash P990
3. flsah ril from clockworkmod
4. clear cache
5. restore backup
Is that right?
http://forum.xda-developers.com/showpost.php?p=12923153&postcount=30
The RIL is in the BIN file.
So download the zip archive and follow the instructions.
Hi kopchev. I`m sorry for being a pain but where can I download the bin file?
I already downlaoded my Baseband 1035.21_20110405 - DOWNLOAD (http://android.modaco.com/content/lg...5-21-20110315/) (ROMraid Load Balancing) - MD5: 599fb242c0224894b1ad2eb004586527 (thanks for the file you-know-who!). Is this the massive file I need to download from the link you provided in your replay?
Can you provide me please with the link to the ril bin file I need? I would appreciate.
http://www.fileserve.com/file/Wapeq87/BIN_LGP990AT-00-V10b-234-XX-MAR-14-2011+0.zip
Thank you very much kopochev and withoutwings for all the help! I did as you said, just performed a nandroid backup and it worked like a charm. Got latest baseband up and running! You are stars!
Any feedback from the new radio. I flashed my mom's 2X and I still find the intalk sound a bit distorted and muffled...
Actually just made a couple of phone calls and tested with my voicemail. It actually made a bit of difference for me. It seems to be much better in my case. The voice quality has improved and seems cleaner as well.
i'm a beginner of samsung galaxy s I9000 user, i would like to upgrade my froyo 2.2 to gingerbread 2.3.3 (is 2.3.3 beta ver or full ver?)
i dint roots my I9000 before, what should i do? and i found out that there are a lot of file to download, such as :-
With bootloaders: (The bootloaders in this firmware are safe and will not disable Download Mode)
XWJVB NEE Multiupload Link: Download (155.6 MB) Double-click to extract
XWJVB XEE Multiupload Link: Download (155.7 MB) Double-click to extract
XWJVA LUX Multiupload Link: Download (144.3 MB) Double-click to extract
XXJVK Multiupload Link: Download (146.72 MB) Double-click to extract
XXJVK Mediafire Link: Download (146.72 MB) Double-click to extract
and
Without bootloader:
XWJVB NEE Multiupload Link: Download (155.4 MB) Double-click to extract
XWJVB XEE Multiupload Link: Download (155.4 MB) Double-click to extract
XWJVA LUX Multiupload Link: Download (144 MB) Double-click to extract
XXJVK Multiupload Link: Download (146.5 MB) Double-click to extract
XXJVK Mediafire Link: Download (146.5 MB) Double-click to extract
thats why i'm getting confuse which file should i download and use
http://media.xda-developers.com/images/smilies/confused.gif
please advise, i really need help in this.please guide me step by step and what s/ware i should use.
THANKS
by Chen.Koji
Gingerbread is Beta .
http://www.theandroidsoul.com/how-to-install-xwjvb-gingerbread-rom-gaalxy-s/
Installing may brick your phone and invalidate warranty .
Backup your current firmware .
jje
If you have no idea what your trying to do, you might wanna consider waiting until a official release which can be obtained through KIES. Otherwise, if your willing to take chances, you could try one of the betas. But be aware that you could seriously brick your phone... although it being i nice brick though
Update to 2.3.3
I suggest going into JVB (I don't tried JVA, but should be almost the same)
http://forum.xda-developers.com/showpost.php?p=12979275&postcount=1613
Detailed instructions, links to downloads and video, but basically:
Get Odin and JVB with bootloaders (XWJVB NEE)
No pit and no re-partition:
* Start Odin without connecting the device.
* Load the files that you want to flash:
PDA = PDA
PHONE = PHONE
CSC = CSC
* Put the phone on Download Mode and connect the device.
* Wait for Odin to detect the device and hit Start
In this thread are some images too.
http://forum.xda-developers.com/showthread.php?t=1011901
Hope that helps, and as everyone said, your warranty is broken and u can brick your phone, but if u follow instructions u should be safe.
And remember, if u are not sure on what are u doing, read, look and ask.
Official Rom from LG - v30a!!!!
This release is the same that is from 7.12.12!!!!!
---------------------------------------------------------------------------------------
links for download:
official link from lg (kdz version)
http://csmg.lgmobile.com/swdata/WEBSW/LGP990/ANEUDW/V30a_00/V30A_00.kdz
Smartflash version of the Rom
http://file.qip.ru/get/EpX_YlZ5/BIN_LGP990AT-00-V30a-EUR-XXX-N.html
mirrors:
http://www.multiupload.nl/Z4413CU6XN (thanks to sander-m)
http://www.putlocker.com/file/28C0DF5FDD929E34 (thanks to tiagorl)
Ril http://www.multiupload.nl/2764GZ1F8Q
BB http://www.multiupload.nl/0C893V659X (thanks to cojo11)
---------------------------------------------------------------------------------------
You are going to download zipped file. This The download contains the following files: (thanks to petr.klos)
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
---------------------------------------------------------------------------------------
For flash use Smartflash
Smartflash tutorial by PAUL (thanks to petr.klos)
I would just add, that this thread is focused on flashing sole baseband. To flash firmware (ROM) you have to add one single step.
Where is
"--Click the browse button next to 'CP Bin:' and select the baseband (FLS) file--"
you add
"--Click the browse button next to 'AP Bin:' and select the firmware (BIN) file--"
For those who get errors while flashing, this is what always fixes issues for me: (thanks to Custom40)
1) Reboot PC and just start over.
Or:
2) If you face an error in the middle of the installation, then re-plug the phone, start over but this time put the AP file in the CP bin box and the CP file in AP box.
---------------------------------------------------------------------------------------
-=How to get root=-
=1= (thanks gabrielecif)
To get root easy (no data wipe and original bootloader) go to these thread:
http://forum.xda-developers.com/showthread.php?p=35138820#post35138820
=2= (thanks to RobYyY)
UNLOCKED BOOTLOADER+CWM6+ROOT
o2x-nvflash-bootloader_unlock_v30a+CWM6.zip
♦unzip attached archive
♦put your phone into nvflash mode(don't know how? use search button)
♦open "flash-boot.bat"
♦put again your phone into nvflash mode
♦open "cwm.bat"
♦boot into cwm and flash SuperSU Root.zip
♦reboot and enjoy
EDIT1: Root doesn't work with su303.zip i don't know why.. but i have made a zip with supersu and root is working. have fun(supersuroot.zip is attached)
=3= (thanks to joiN85)
-After you install with smartflash v30a rom, download and flash "Bootloader unlock ICS Official" and "Recovery 5.0.2.8e v30a Official"
-Flash with NVFlash: Recovery 5.0.2.8e v30a Official + Bootloader unlock ICS Official
-Go in cwm and install "Superuser-3.1.3-arm-signed-tradotto.zip"
-Reboot
-Now you have Root
IMPORTANT!!!
Some users have charging problems (while connect your phone to charge with screen on - it breaks)
It is becouse of root in some case, without root everything is ok. Need more fredbacks for this!
Credits to Daniel Aminov, he received the link (smartflash version from 4.12.12).
wow. hope this is real.. can't wait to test
Yeah, i hope so too) Now i must go and I'll return in the evening, and downloading the firmware will be finished i think. Then I'll be able to say exactly.
It looks like that it comes from anonymous.
Gesendet von meinem Optimus 2X mit Tapatalk 2
URL from Leaker doesn't say error 404 anymore for me, but still can't download KDZ file :fingers-crossed:
sander-m said:
OK, new mirror for those who want stable/fast download (mirror by google);
http://goo.gl/RDqeW
Click to expand...
Click to collapse
File contains:
Code:
LGP990AT-00-v30a-EUR-XXX-NOV-30-2012+0_AP.bin 01.12.2012 00:02:38
LGP990AT-00-v30a-EUR-XXX-NOV-30-2012+0_CP.fls 30.11.2012 22:14:06
Could anyone who downloaded it, put it onto some other fileshare? (Kindly please)
Was at it myself but only downloaded 45 MBs then it crashed.
By my WinRAR, it contains
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
uncompressed filesize 1 018 167 296 B
and probably CP, which I cannot confirm, since my download failed and I can't w8 for another 12 minutes to redownload it. Worksh[ee]t.
downloading now. hope its real and genuine...for me, the leaker still says not found
donwloading
Downloading...
downloading 20 min left
The download contains the following files:
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
I will see if I can upload to a mirror.
Who got the baseband for this 30a?
Finally waiting to get back home n try this........
Shadowchaz said:
The download contains the following files:
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
I will see if I can upload to a mirror.
Click to expand...
Click to collapse
Can u confirm whether its genuine and can u gives all some more details after installing. I probably wud've done it if i had downloaded it... And thanks a million for mirroring it...waiting for the link...
orbital_71 said:
Who got the baseband for this 30a?
Click to expand...
Click to collapse
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?
naazgulla said:
Can u confirm whether its genuine and can u gives all some more details after installing. I probably wud've done it if i had downloaded it... And thanks a million for mirroring it...waiting for the link...
Click to expand...
Click to collapse
Trying to upload to my dropbox, but the upload keeps failing
rxformula91 said:
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?
Click to expand...
Click to collapse
We cannot correct you, since you in fact are correct.
rxformula91 said:
Correct me if I am wrong but Isn't the baseband just the fls file in the zip?
Click to expand...
Click to collapse
I just want BB
Thanks for sharing this,
I've completed the download, currently smartflashing it to my O2X.
I'm also uploading it right now to other filehosting services.
I will report back soon. Maybe this is the real deal.
Edit:
Mirror:
http://www.multiupload.nl/Z4413CU6XN
Smartflash error occured . Maybe it's just a fake or whatever. Device is still at v28G.
Flashing.....
Hello!
I give up! I just can't find a stock KDZ flash file for my P990 Every download link is down.
I am going to use this tool:
http://forum.xda-developers.com/showthread.php?t=2020737
to flash a stock ROM and then update to ICS with the new bootloader.
Every ROM i try has problems with the Kowalski kernel. The phone is just sluggish! So a complete refresh i needed as there are several other issues too.
Can somebody provide me with one? It has to be European Open or danish, right?
Current ROM is the old Topogigi Froyo ROM. But even with that i have trouble.
Hejsa. Det nemt.
Download the attached file, extract it and open the program. Write P990 as model and write down your IMEI without any -
It will download the official ICS for your phone automatically. Then use the AIO Toolkit. Extract it with the tool and then flash with Smartflash - that's the easiest way.
Held og lykke kammerat.