Database Develop

[Q] Cappy Bricked??? Pls help!!!! unique problem!!!

Ok i know and have seen that there are many experienced users in this forum, so i give you this!!Pls help sum1!!!
I think i bricked my fone, tried to get cwm 3 on it, then while rebooting, it wont reboot. went into download mode with odin (3 button fix) (i have done this 9-10 times before, not a noob to this), selected pit and tar and hit start. odin stuck on factoryfs and fully orange screen on fone. removed battery, fone, usb, odin restart, tried again, yellow screen. again. red screen. now got frustrated. tried normal odin(not the 3 button fix), again yellow screen.took out battery to try again, but fone wont start/go in dl/recvry mode anymore. tried on 2 different comps with xp/win7. no go.
SCREWED??
BTW, i ordered a jig.should arrive by end of week.

It'll be fine after you get your jig.
Sent from my SAMSUNG-SGH-I897

same thing happened to me...but i just got it replaced..as there was no way i could wake it up...but try Jig..or just get it replaced...every captivate is under warranty...tell them u were doing official Froyo update and lost electricity or something....

yes will try that and post.
In the meantime, can sum1 pls run me thru the steps to install custom ROM on preinstalled froyo cappy? My prev 1 was stock eclair, i filed 4 insurance and am sure the new 1s gonna b stock froyo. I have heard that there are a no. f probs with stock froyo phones????

Its a semi uncommon problem.I have had the random colored screens before and had to pull battery. Managed to get odin to work after a couple of times
Sent from my SAMSUNG-SGH-I897 using XDA App

psycho2097 said:
yes will try that and post.
In the meantime, can sum1 pls run me thru the steps to install custom ROM on preinstalled froyo cappy? My prev 1 was stock eclair, i filed 4 insurance and am sure the new 1s gonna b stock froyo. I have heard that there are a no. f probs with stock froyo phones????
Click to expand...
Click to collapse
flash to stock using full Odin(full odin to avoid loosing 3 button combo), flash CWM.Zip....flash any froyo custum rom
or just flash the fix for sign verification (its somewhere in the threads) then you can avoid flashing to stock....just flash CWM and Custom rom

viny2cool said:
flash to stock using full Odin(full odin to avoid loosing 3 button combo), flash CWM.Zip....flash any froyo custum rom
or just flash the fix for sign verification (its somewhere in the threads) then you can avoid flashing to stock....just flash CWM and Custom rom
Click to expand...
Click to collapse
YEA, I THOT SO 2... JUZ WANTED 2 VERIFY, WAT ABOUT WEN CHANGING ROMS?do i need to flash to stock every time, or can i just take a backup f froyo stock using cwm?(sorry 4 the caps...)

Most of the custom roms don't require flashing to stock now a days. But if its mentioned in the instructions than I would do it.
But definitely you should disable lagfix and stuff before flashing over new rom.
Sent from my SGH-I897 using XDA Premium App

viny2cool said:
Most of the custom roms don't require flashing to stock now a days. But if its mentioned in the instructions than I would do it.
But definitely you should disable lagfix and stuff before flashing over new rom.
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.

psycho2097 said:
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
Click to expand...
Click to collapse
If u flash any zip from stock froyo it gives you sign verification error. So u need to fix that a nd than just flash custom rom as u normally do
Sent from my SGH-I897 using XDA Premium App

Crash N Burn....Owch!
psycho2097 said:
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
Click to expand...
Click to collapse
Sounds as though your bootloader got hammered.
Yes, as another posted, with 3e recovery you'll get a signing error, but there is a workaround, depending on your device and ROM you're using to have files pass through as if it were on 2e recovery. Another method is if one passes files that are unsigned. (only load if it's from a trusted source)
Is it possible you performed a nandriod backup before this debacle occurred?
If so, try a restore from recovery with your last nandroid backup. This should restore the bootloader and correct partitioning on your disk.
HtH
Peace-

Liv33viL said:
Sounds as though your bootloader got hammered.
Yes, as another posted, with 3e recovery you'll get a signing error, but there is a workaround, depending on your device and ROM you're using to have files pass through as if it were on 2e recovery. Another method is if one passes files that are unsigned. (only load if it's from a trusted source)
Is it possible you performed a nandriod backup before this debacle occurred?
If so, try a restore from recovery with your last nandroid backup. This should restore the bootloader and correct partitioning on your disk.
HtH
Peace-
Click to expand...
Click to collapse
inncidentally i did do a couple of nandroids before "all the **** hit the fan". and i could use it to restore. but how? my fone simply wont turn on, neither go in2 recv/ dl. so how 2 restore???????

all 2.2 have 3e recovery, custom roms built on 2.2 come pre cracked.
here is the 3e recovery fix. http://forum.xda-developers.com/showthread.php?t=909213
it works on all 2.2 stocks with 3e.
if you are rooted using "one click root 1.7" (NOT ODIN ONE CLICK!!!) you dont need adb commands just root explorer to mount and replace file. or use adb to mount and push file. the instructions in the thread have the 2 methods mixed together.
no offence but ignore Liv33viL on this one

Trusselo said:
no offence but ignore Liv33viL on this one
Click to expand...
Click to collapse
Dude, that's just plain wrong. Let each person decide on their own who's advice to take and who's to ignore. It's an open forum and we all have the right to share our knowledge and experience. The focus here should be helping people get the assistance they need, not to diminish someone's credibility based on a personal opinion.
In short, grow up.

Trusselo said:
no offence but ignore Liv33viL on this one
Click to expand...
Click to collapse
ok, but then do u mean my bootloader is not damaged? can it be still repaired by using jig? can i restore nandroid?? but how 2 do so since my fone wont turn on at all?

What happens when you do turn it on- nothing? Or does it hang on the boot screen?
Sent from my SAMSUNG-SGH-I896 using XDA App

I had the very same problem. Your bootloater is boogered up now. I sent mine to an xda member and he fixed it.
Even with a jig I wasn't able to do anything. My phone would go into d/l mode with it but that was all it would do.
I paid $50 to have mine fixed which in my opinion is well worth it. That doesn't include shipping costs. I had connexion2005 fix it for me. He a great guy and does very fast work. It beats buying a new phone.
Hope this helps.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

All shameless advertising aside, it's worth trying a fix where others give up and pay someone. Through the process of elimination we can determine if you need professional help lol!
Sent from my SAMSUNG-SGH-I896 using XDA App

Thanks guys..will try connexion when the jig fails.
Sent from my SAMSUNG-SGH-I897 using XDA App

N does anybody know what to do, as my newly arrived cappy has a distinctive yellow tint to the screen. Do I call samsung and ask for a new one? Or is there some method to fix it by software?
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Need to go back to stock

Hey guys I need to send my phone back for warranty replacement and I am afraid to use Odin one click, because I know it bricked a friends phone recently beyond even JIG repair. His was an 11.02 or something and mine is a 10.07.
All I have flashed is DG's Cognition if that helps.
What should I do to go back to factory stock, will oneclick kill mine like his?
I cant afford to brick this one so I just need some confirmation, thanks guys.

Odin back to stock is the preferred method. While there is risk of brick, it generally doesn't happen that often. I have used it countless times.
But Odin will bring you back to stock and wipe any evidence from having a custom ROM.
http://www.megaupload.com/?d=SBSMALFJ
*Also, you could always say you were trying to update via kies and it stopped working (if anything went wrong) They won't ever know and it'll just get flashed stock firmware once they get ahold of it anyway.

I believe you can flash back to stock using OdinOneClick. But just to be sure you can flash this package instead
--> http://forum.xda-developers.com/showthread.php?t=995143
That package flashes everything but the two bootloaders and param.lfs. Meaning if anything goes wrong you still can use the combos or a jig to get back into download mode .
Just to double check you use:
Vol up, Vol down & power key to get into recovery mode?
&
Vol up, Vol down & usb cable to get into download mode?

It doesn't matter at all if you brick it. You're sending it in for a warranty replacement already. If odin one click bricks it tell them some bs about kies doing it.

studacris said:
It doesn't matter at all if you brick it. You're sending it in for a warranty replacement already. If odin one click bricks it tell them some bs about kies doing it.
Click to expand...
Click to collapse
+1
10 char
Sent from my SGH-I897 using XDA Premium App

Another thread for a question easily answered by doing a search first.

Miami_Son said:
Another thread for a question easily answered by doing a search first.
Click to expand...
Click to collapse
Is it really necessary to post a useless post, with no information?
You really think I didn't search these insanely complicated and deep forums?
A friend of mine just ended up with a hard brick after using odinoneclick.
Something about a later build phone. But nobody seems to know much about this issue.
So needless to say I would like to be a bit cautious now.

brannutz said:
Is it really necessary to post a useless post, with no information?
You really think I didn't search these insanely complicated and deep forums?
A friend of mine just ended up with a hard brick after using odinoneclick.
Something about a later build phone. But nobody seems to know much about this issue.
So needless to say I would like to be a bit cautious now.
Click to expand...
Click to collapse
About as necessary as you starting a new thread for a common issue instead of posting to an existing related thread. And the problem with later build phones (1008 and up) is also well documented in here. Be cautious all you want, but respect the forum by not starting redundant threads.

brannutz said:
Hey guys I need to send my phone back for warranty replacement and I am afraid to use Odin one click, because I know it bricked a friends phone recently beyond even JIG repair. His was an 11.02 or something and mine is a 10.07.
All I have flashed is DG's Cognition if that helps.
What should I do to go back to factory stock, will oneclick kill mine like his?
I cant afford to brick this one so I just need some confirmation, thanks guys.
Click to expand...
Click to collapse
Mine is a 10. 07 and I have flashed to stock with one click plenty of times
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

brannutz said:
Hey guys I need to send my phone back for warranty replacement and I am afraid to use Odin one click, because I know it bricked a friends phone recently beyond even JIG repair. His was an 11.02 or something and mine is a 10.07.
All I have flashed is DG's Cognition if that helps.
What should I do to go back to factory stock, will oneclick kill mine like his?
I cant afford to brick this one so I just need some confirmation, thanks guys.
Click to expand...
Click to collapse
Im trying to get back to stock from GB. Mine is 10.06, OdinOneClick (with 2 bootloaders) wont work, odin3 works but I cant find a stock rom with those 2 bootloaders.
I could tell you to use odin3, but I cant link you a stock rom with 2 bootloader.

xisque said:
Im trying to get back to stock from GB. Mine is 10.06, OdinOneClick (with 2 bootloaders) wont work, odin3 works but I cant find a stock rom with those 2 bootloaders.
I could tell you to use odin3, but I cant link you a stock rom with 2 bootloader.
Click to expand...
Click to collapse
Have you tried the one click from designgears thread it is in development... If you can that is your best bet... You might want to try that
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

leezrd said:
Have you tried the one click from designgears thread it is in development... If you can that is your best bet... You might want to try that
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I tried this one:
http://forum.xda-developers.com/showthread.php?t=731989

xisque said:
I tried this one:
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
And still nothing?
Sent from my SGH-I897 using XDA Premium App

is there a way to go back to stock compleately?
I used odin and it brings it back to stock software, but what about the data on the phones internal memory all that stuff is still there. Like pictures, music, titanium backup files, etc.
Can the internal memory be formated?

Coreym said:
And still nothing?
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
OneClickOdin doesnt work with my phone as I posted before.

usSiR said:
is there a way to go back to stock compleately?
I used odin and it brings it back to stock software, but what about the data on the phones internal memory all that stuff is still there. Like pictures, music, titanium backup files, etc.
Can the internal memory be formated?
Click to expand...
Click to collapse
Yes, search for master clear.

usSiR said:
is there a way to go back to stock compleately?
I used odin and it brings it back to stock software, but what about the data on the phones internal memory all that stuff is still there. Like pictures, music, titanium backup files, etc.
Can the internal memory be formated?
Click to expand...
Click to collapse
Or dial *2767*3855# were you dial numbers (dialer) because master clear with odin lags and hang up sometimes
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Coreym said:
And still nothing?
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
rwaarrrrrrrrr!!!
I got a new computer and new cable and now odin 1 click is working good!

Odin and Windows 7
Just an FYI for all Windows 7 user about Odin3 (oneclick or otherwise) in general. Use Windows XP service pack 2 compatibly mode to make this run without getting locked up as often.

New to Rom Flashing - URGENT Help needed!

Hi all,
Sorry if i sound stupid, but I am new to all of this. I am trying to flash a gingerbread ROM onto my Rogers branded captivate. Currently I am running Rogers stock Froyo.
I have rooted and unlocked my phone using one click root, and the SGS unlock tool from the android market. I have also applied Ryans OCLF. I have busybox installed and the lasted version of Rom Manager.
However, every time i go to backup my stock rom using rom manager, nothing happens. I try to first flash the Clockwork Mod recovery, select the Captivate file and let the phone reboot, black screen with a yellow exclamation point in a white triangle with a Droid device laying under it. It will sit there forever until I manually restart the phone, at which point it acts fine.
I have backed up using titanium backup but cannot do it thru ROM manager. I have read countless forums, but it havent found a solution that works.
So i decided to proceed without a backup. I tryed to put the phone in download mode using the buttons so that I can flash it using ODIN but it doesnt go into download mode using any of the buttom press methods. I have tried to reinstall the packages from the boot menu, but i then get an error saying "e: failed to verify whole signature...."
I have also put a copy of the recently leaked gingerbread rom on my SD card and tried to install the ROM using rom managers install ROM from SD card, but i get the same black screen with yellow exclamation point and nothing happens until i maually start the phone.
I have no clue what I am missing? How to fix this? I have read and watched so many tutorials, followed all the steps. THey seem so easy on paper, but nothing that is supposed to happen, happens for me. Anyone have any suggestions on what I am doing wrong?
Please help!!

You need to follow installation instructions in the thread for whatever GB rom you are installing TO THE LETTER.
Which one are you trying?

You need to search for fixing the 3e recovery. 3e won't let you install custom roms. Also rom manager is just a gui interface for clockwork mod so in. wouldn't use it
Sent from my GT-I9000 using XDA App

cappysw10 said:
You need to follow installation instructions in the thread for whatever GB rom you are installing TO THE LETTER.
Which one are you trying?
Click to expand...
Click to collapse
I was trying to install the Official Gingerbread 2.3.3 for Captivate that was just leaked for the ATT captivate. I beleive the build number is I897UCKF1.
I do remember seeing the 3e recovery in the boot menu. Thanks alot, I will try to find a recovery fix and try that, then post the update.
Thanks alot for the suggestions so far. Its greatly appreciated!

Please for the love of all that is good in the world, do some research before you brick yourself for good. All of your issues would have not happened had you read more first before jumping in. I have seen far to many of these types if threads lately. Yes it takes a few hours to go through the threads but you save yourself the time you would spend (sometimes days) fixing your mistake.

zelendel said:
Please for the love of all that is good in the world, do some research before you brick yourself for good. All of your issues would have not happened had you read more first before jumping in. I have seen far to many of these types if threads lately. Yes it takes a few hours to go through the threads but you save yourself the time you would spend (sometimes days) fixing your mistake.
Click to expand...
Click to collapse
Your absolutely right, I did ALOT of reading, been doing so alot over a few weeks. Unfortunately, (or perhaps, I did not do enough digging) none of the tutorials, even the ones for beginners that i found on this forum mentioned anything about finding a fix for the 3e recovery. No one mentioned that the 3e Recovery bundled with the Rogers version of Froyo did not allow the install of custom roms, it also did not allow backups. Thanks to Crystalhand for letting me know this.
Anyway i found this link which helped:
http://forum.xda-developers.com/showthread.php?t=909213
I am FINALLY able to make a full backup image of my stock ROM and apps using CWM. This puts me more at ease now knowing i can also revert to stock if i install a rom that is not working properly for me.
The backup is completing as I type this. I will update again once I am able to install the gingerbread Rom I wanted to install.
Thanks again to all of you for the help!

that backup is not to restore the stock rom directly from whatever you flash. that is an imaage of your set up on stock rom. so you have to use odin to flash back to that stock rom you are on then restore that backup and it will be like you never flashed anything at all. if you just restore that backup onto the custom rom you flash it will not work properly.
the app backup your making with titanium backup will restore your apps on whatever you flash, but the rom backup doesnt work like that.

I would suggest using designgears odin 1 click, becuase no offence but you seen new and that would be least likely way for you to hard brick going to gb... Good luck
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Flashing is usually easy and safe (for the most part). But if something happends and it gets bricked u could always make/buy jigs. Easiest way to make I've seen is
forum.xda-developers.com/showthread.php?t=841512
Or you can buy them for about $8 maybe more depending your location (making em can cost less). The only thing I haven't tested the jig with is messed up bootloaders, example flashing gb bootloaders and flash froyo secundaries, everything else the jig works (atleast my experience)
Sent from my SGH-I897 running Cog 5 Beta 2

prbassplayer said:
Flashing is usually easy and safe (for the most part). But if something happends and it gets bricked u could always make/buy jigs. Easiest way to make I've seen is
forum.xda-developers.com/showthread.php?t=841512
Or you can buy them for about $8 maybe more depending your location (making em can cost less). The only thing I haven't tested the jig with is messed up bootloaders, example flashing gb bootloaders and flash froyo secundaries, everything else the jig works (atleast my experience)
Sent from my SGH-I897 running Cog 5 Beta 2
Click to expand...
Click to collapse
With messed up bootloaders you have to jtag
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

leezrd said:
With messed up bootloaders you have to jtag
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Well that's good to know. I'm not paying $150 for a jtag.
Sent from my SGH-I897 running Cog 5 Beta 2

$50 not $150.

prbassplayer said:
Well that's good to know. I'm not paying $150 for a jtag.
Sent from my SGH-I897 running Cog 5 Beta 2
Click to expand...
Click to collapse
Actually $50 by connexion 2005 but still expensive got something you don't need you to do
EDIT: Nevermind studacris beat me by a couple second to it
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

studacris said:
$50 not $150.
Click to expand...
Click to collapse
Oh? where?
Edit:
leezrd said:
Actually $50 by connexion 2005 but still expensive got something you don't need you to do
EDIT: Nevermind studacris beat me by a couple second to it
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Dosen't he charge $50 for a fix? not the jtag itself?

Mobiletechvideos.com

Bootloaders?

Quick question,if i want to go to a rom that has gb bl.s from 1 with froyo bl.s can i just download and flash gb bl,s stay in rec.then flash rom?
Sent from my SAMSUNG-SGH-I897 using XDA App

it is so risky to flash bootloaders in recovery....and should not be done that way

Pirateghost said:
it is so risky to flash bootloaders in recovery....and should not be done that way
Click to expand...
Click to collapse
I wasnt aware of a full package for bootloaders that is set up to flash with CWM.

mrhaley30705 said:
I wasnt aware of a full package for bootloaders that is set up to flash with CWM.
Click to expand...
Click to collapse
dont know of any off hand, but i do know that you can flash sbl.bin via CWM...and its extremely risky to do so

Pirateghost said:
it is so risky to flash bootloaders in recovery....and should not be done that way
Click to expand...
Click to collapse
Ok,thanks can you download bl,s to phone from pc then flash rom?
Sent from my SAMSUNG-SGH-I897 using XDA App

DEW-SCGS said:
Ok,thanks can you download bl,s to phone from pc then flash rom?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
my first recommendation is Heimdall, second would be ODIN
if you have to ask about downloading bootloaders to the phone from the PC, then you shouldnt be doing this. this would indicate you have a lot more reading to do to understand what you are actually doing.

Odin
Sent from my unbrickable cappy *bam*

Pirateghost said:
my first recommendation is Heimdall, second would be ODIN
if you have to ask about downloading bootloaders to the phone from the PC, then you shouldnt be doing this. this would indicate you have a lot more reading to do to understand what you are actually doing.
Click to expand...
Click to collapse
Reason i asked is a friend of mine dl a rom based on gb bl,s he was on rom,with froyo bl,s ended up messed up phone i got it fixed with help on here ,all i had to do is dl gb bl,s to his phone and it worked fine i did I
Use odin just curious if would work again or if i got lucky that time
Sent from my SAMSUNG-SGH-I897 using XDA App

hello everyone,yesterday i was intend to downgrade the rom i was using for my captivate.i went to download menu and with odin i completed the steps.but when when it rebooted now all i can see is the at&t screen flashing and if i try to plug it with my pc the battery ico shows like charging.so i am badly in need of help.cuz i cant go to the download menu(and i tried all the 3 buttons combo usb jig every single thing but nothing happens),so plz help me out.what should i do.i got no idea i tried a lot but nothing happens plz help me out if anyone knows anything about it.

Phone will be turned off when I wake up in the morning.

My phone is on yesterdays CM 10.1 nightly.
Sometimes when I wake up my phone will be off, or if I leave my phone at home when I get home from work it will be off.
Is there some error log? Does anyone else have these issues?

Did it just start happening with some of ur latest flashes or has it been an ongoing problem ??
If it has been a persistant problem, it could be ur power button failing...or simply ur battery goin dead.
Sent from my SAMSUNG-SGH-I747 using xda premium

4-2ndtwin said:
Did it just start happening with some of ur latest flashes or has it been an ongoing problem ??
If it has been a persistant problem, it could be ur power button failing...or simply ur battery goin dead.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
When I boot back up battery is > 70% usually. I just bought the phone used with stock ROM on it, so I rooted, installed ROM Manager, then did a full wipe to a CM 10.1 nightly.
Therefore I have no idea if this is a software or hardware related bug. I cant trust the phone to be an alarm clock for me I can tell you that much.
Anything else I can do?

The basic thing that i would do, is get fully charged, flash back to stock kk4 firmware and see how it does, in order to rule out a rom issue. But if ya don't want to do that, keep in mind that ur phone is probably over two yrs old and the life of the battery just may be almost over. There is a date stamped on the stock battery if that is what ya have.
I recently bought a couple of replacement batteries for my old captivate, at the first part of this year, from mobiletechvideos.com. New batteries make a big difference... is an understatement.
Sent from my SAMSUNG-SGH-I747 using xda premium

4-2ndtwin said:
The basic thing that i would do, is get fully charged, flash back to stock kk4 firmware and see how it does, in order to rule out a rom issue. But if ya don't want to do that, keep in mind that ur phone is probably over two yrs old and the life of the battery just may be almost over. There is a date stamped on the stock battery if that is what ya have.
I recently bought a couple of replacement batteries for my old captivate, at the first part of this year, from mobiletechvideos.com. New batteries make a big difference... is an understatement.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks! Ill check that battery date and ebay myself one if need be. Ill aslo flash back to stock. The phone is for my girlfriend so she doesnt need anything fancy. Where can I get a stock ROM to flash? id like to try to avoid ODIN/Hemidal if possible.

In my signature link below (if u r on a pc or in a web browser on ur phone) are a lot of useful links. Since u r on CM rom, u will have to use Odin or Heimdall to get back to Stock KK4. :/ sorry, no way around that, because of the different partitions used on CM as opposed to Stock. If u decide to use an Odin or Heimdall in my sig, just use one Without bootloaders, unless u don't have the Gingerbread bootloaders already.
Sent from my SAMSUNG-SGH-I747 using xda premium

Wing_Zero_Custom said:
My phone is on yesterdays CM 10.1 nightly.
Sometimes when I wake up my phone will be off, or if I leave my phone at home when I get home from work it will be off.
Is there some error log? Does anyone else have these issues?
Click to expand...
Click to collapse
May be you have enabled the deep idle mode.
Captivating my captivate, Thanks to Sephhi

4-2ndtwin said:
In my signature link below (if u r on a pc or in a web browser on ur phone) are a lot of useful links. Since u r on CM rom, u will have to use Odin or Heimdall to get back to Stock KK4. :/ sorry, no way around that, because of the different partitions used on CM as opposed to Stock. If u decide to use an Odin or Heimdall in my sig, just use one Without bootloaders, unless u don't have the Gingerbread bootloaders already.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Used the kk4 one click phone is booting up now hopefully this will take care of the phone for a while.
I may root to block ads from my host file.
Avikar said:
May be you have enabled the deep idle mode.
Captivating my captivate, Thanks to Sephhi
Click to expand...
Click to collapse
Not sure how to do that.. but turning the phone off? Thats one deep idle!!

[Utility]KK4 Easy Root by Red_81 is in my sig link as well...if u need it.
Later.
Sent from my SAMSUNG-SGH-I747 using xda premium

Wing_Zero_Custom said:
Used the kk4 one click phone is booting up now hopefully this will take care of the phone for a while.
I may root to block ads from my host file.
Click to expand...
Click to collapse
Why not just flash a different ROM if going back to stock fixes it? Imo, nightly builds for anything are good and bad. Good, because fixes come out everyday, bad because way too many bugs.
There are plenty of other custom ROMs available, no point in staying on 2.3.5 or w/e when you can have 4.2.2 that runs fine on most devices

x0ne215 said:
Why not just flash a different ROM if going back to stock fixes it? Imo, nightly builds for anything are good and bad. Good, because fixes come out everyday, bad because way too many bugs.
There are plenty of other custom ROMs available, no point in staying on 2.3.5 or w/e when you can have 4.2.2 that runs fine on most devices
Click to expand...
Click to collapse
KK4 did not solve the problem. Its either battery or hardware related. I just ordered an eBay battery, my current batter says 2010/8/4 and seems to hold a charge very well, I cant imagine there is something wrong with it.
4-2ndtwin said:
[Utility]KK4 Easy Root by Red_81 is in my sig link as well...if u need it.
Later.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Also... with the KK4 when the phone reboots the screen scrambles between the ATT screen and the Galaxy S animation. Its pretty nasty looking and lasts for about 3 seconds.

That pixelated screen means u don't have the Gingerbread bootloaders installed.
Sent from my SAMSUNG-SGH-I747 using xda premium

4-2ndtwin said:
[Utility]KK4 Easy Root by Red_81 is in my sig link as well...if u need it.
Later.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Your dropbox link and its mirror is dead, i need to root to flash recovery and boot to recovery from terminal. Three button doesnt do anything.
I just flashed the Corn kernel, still cant get into recovery with three button.
Okay going to get the bootloaders now.

Wing_Zero_Custom said:
Your dropbox link is dead, i need to root to flash recovery and boot to recovery from terminal. Three button doesnt do anything.
Click to expand...
Click to collapse
If you don't have the GB bootloaders, Recovery should be vol up+power.
Also, to flash Odin KK4 with bootloaders, you only need download mode, which is vol down+power.

BWolf56 said:
If you don't have the GB bootloaders, Recovery should be vol up+power.
Also, to flash Odin KK4 with bootloaders, you only need download mode, which is vol down+power.
Click to expand...
Click to collapse
Okay I just ODINed this: i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe
Could that have been the cause of my reboots? Should flash CM 10.1 now or should I just stay on KK4 and find out if it was really the boot loaders?

Wing_Zero_Custom said:
Okay I just ODINed this: i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe
Could that have been the cause of my reboots? Should flash CM 10.1 now or should I just stay on KK4 and find out if it was really the boot loaders?
Click to expand...
Click to collapse
Up to you. You can always stay on KK4 for a day or two and see how it behaves.

BWolf56 said:
Up to you. You can always stay on KK4 for a day or two and see how it behaves.
Click to expand...
Click to collapse
True.
Okay lets get technical...
what does the boot loader and kernel have in common? Doesnt the kernel tell the software how to talk to the hardware?
When then would boot loaders have an effect on the three button? Do the boot loaders handle what partition to boot into?

Wing_Zero_Custom said:
True.
Okay lets get technical...
what does the boot loader and kernel have in common? Doesnt the kernel tell the software how to talk to the hardware?
When then would boot loaders have an effect on the three button? Do the boot loaders handle what partition to boot into?
Click to expand...
Click to collapse
They actually don't have much in common. They handle completely different things and don't affect each other (so one could be change and it wouldn't affect the other). That being said, the ROM and Kernel are built around the bootloaders, therefor, you need GB bootloaders to use GB and up (same goes for froyo and down). Also, kernel doesn't talk to the phone until it's booted up, while the bootloaders will start before the ''OS'' and pretty much guides the kernel.
Not sure if that answers your question. If not though, there's a lot of information about ROM, kernel, recovery and bootloaders online.

Wing_Zero_Custom said:
Your dropbox link and its mirror is dead, i need to root to flash recovery and boot to recovery from terminal. Three button doesnt do anything.
I just flashed the Corn kernel, still cant get into recovery with three button.
Okay going to get the bootloaders now.
Click to expand...
Click to collapse
Here ya go... (dropbox was suspended for too much traffic :/) https://hotfile.com/dl/204220999/540f395/KK4_Root_v1_1.zip.html
Sent from my SAMSUNG-SGH-I747 using xda premium
---------- Post added at 11:30 AM ---------- Previous post was at 11:26 AM ----------
Wing_Zero_Custom said:
True.
Okay lets get technical...
what does the boot loader and kernel have in common? Doesnt the kernel tell the software how to talk to the hardware?
When then would boot loaders have an effect on the three button? Do the boot loaders handle what partition to boot into?
Click to expand...
Click to collapse
If i remember correctly the sbl (secondary bootloader) contains the button combo info to get into download and recovery modes.
And the i897 GB Bootloaders will fix ur button combos.
Download = phone off, press both volumes, insert micro usb.
Recovery = press both volumes and power until phone boots and u see the first boot splash screen, then release.
Sent from my SAMSUNG-SGH-I747 using xda premium

BWolf56 said:
They actually don't have much in common. They handle completely different things and don't affect each other (so one could be change and it wouldn't affect the other). That being said, the ROM and Kernel are built around the bootloaders, therefor, you need GB bootloaders to use GB and up (same goes for froyo and down). Also, kernel doesn't talk to the phone until it's booted up, while the bootloaders will start before the ''OS'' and pretty much guides the kernel.
Not sure if that answers your question. If not though, there's a lot of information about ROM, kernel, recovery and bootloaders online.
Click to expand...
Click to collapse
Thats exactly what I wanted to know. Now I just need to learn all the technical stuff about my HTC One M7