hi guys im not new to android i had an x10 which was fully customised but have just had a moto milestone. ive flashed several roms in open recovery and they all get stuck at the boot logo and keeps looping. what am i doing wrong. please help
amanda30001 said:
hi guys im not new to android i had an x10 which was fully customised but have just had a moto milestone. ive flashed several roms in open recovery and they all get stuck at the boot logo and keeps looping. what am i doing wrong. please help
Click to expand...
Click to collapse
Post your step first and give more details...
Sent from my A853 using XDA App
i installed rsd did recovery, installed open recovery put the update in open recovery/updates and installed zip. did this with several roms.
Did you wipe data,dalvik,cache?
That the problem most of the time.
Sent from my Milestone using XDA Premium App
yea i did that, do basebands have anything to do with it?
omgosh im so sorry i think ive done it, i didnt wipe partition. im so sorry lol. but thatyou if you hadnt of said that i wouldnt of tries it again
Related
Hello, so yes as it says in the topic. I downloaded gapps for desire while having captivate and i flashed it. I didn't realize that after i was stuck in the boot loop. I'm a huge noob in this, i got this phone yesterday but somehow managed to get cyanogen to work on it. Please help me out somehow. Is there any way to get my phone back to stock rom from this? Btw I can open recovery mode, and download mode. I was trying to master flash while in recovery but it didn't work. So since i can't get the phone to boot up idk what to do. Thanks, and help me out please.
Recovery
Mounts and storage
Format cache, system, data
Flash cm7 initial again
Factory reset
Boot
Odin to get back to stock
Sent from my SGH-I897 using XDA Premium App
I've done that few times, still the same thing. I have no idea why.
#edit#
trying the new method that u just posted up
#edit2#
worked! thanks a lot man!
Please post in the CM7 sticky at the top of this forum AFTER you read through it and see if this issue has already been corrected. Also, try reading the actual CM7 thread in Development forum as there might be help in there.
What he said
Anyone please i need help!!!!!
so here is the scenario...
i flashed my asian galaxy tab to overcome1.4.4
i followed the pdf version of its install instruction...
i flashed over to JME-stock-safe via odin... ok PASSED!!!
then i flashed the kernel... ok PASSED
then upon installing the Overcome ROM 1.4.4 it stucked up to Installing new system in the CWM...
So i started back to the first step to redo the process
still no luck...
i tried it so many times still no luck...
what should i do now...
please help me out guys....
You say you flashed the overcome Kernel, did you get the sexy robot voice during the EXT4 conversion? What error are you getting IN CWM when it fails?
Sounds to me like you didn't let the system do it's conversion before you tried to flash the new ROM.
My advice would be to reflash the kernel, and let it boot after you have done so. Reboot into recovery and flash the ROM.
@btyork
yes i did hear the sexy robot converting and it even reboots at its own
then i followed the steps in installing the overcome room...
i even get to the point where it says " Installing New system"
then i've waited for it to finish..
but... i've been waiting for about an hour... so then i decided to redo the process to the top ( reinstalling again the JME-stock-safe) .... OK PASSED again
I did install the overcome kernel.... OK PASSED again
heard the sexy robot converting....
but now it didn't boot on its own...
i've been waiting again for about an hour then nothing happens...
its stocked up to " GALAXY TAB" screen
i didn't run the bootloader patch in the first placed though...
is it something connected to a signed bootloader???
what else can i do????
It may indeed be the bootloader, although I doubt it if you got the kernel installed....
Did you repartition with the hidden.pit file when you went back stock?
Sent from my GT-P1000 using XDA Premium App
hey buddy we can help u fix ur problem but u hav to ask it on the thread u got the rom from.... mods close this thread please
Try recovery mode, then wipe all the data and reboot.
Sent from my GT-P1000 using XDA App
If you are still able to enter recovery mode and you were wise enough to create a nandroid backup before you flashed overcome you could just use the recovery to get back to your phones state just before you flashed overcome. Sounds maybe asif your zip file may have been downloaded wrong or something ... that's why its also always a good idea to check the md5 of the Rom before you flash it ...
Sent from my Desire HD using XDA App
you probably tried this but just checking, did you try powering off, for some reason after the install mine just hung...it took 2 or 3 poweroffs to get it to start booting...been fine ever since.
Hello all, I would like to ask, if the phone is stuck on bootloop on the lg logo, should i just flash another rom through cwm. I was using cm7 before and then i thought of using some modded stock rom. So when i flashed it bootlooped for several minutes. Now my phone is working after flashing the latest kang. Is that the correct thing to do? thx
lopiop said:
Hello all, I would like to ask, if the phone is stuck on bootloop on the lg logo, should i just flash another rom through cwm. I was using cm7 before and then i thought of using some modded stock rom. So when i flashed it bootlooped for several minutes. Now my phone is working after flashing the latest kang. Is that the correct thing to do? thx
Click to expand...
Click to collapse
If it works, why do you even ask? :what:
Sent from my Optimus 2X using xda premium
I just wanted to know if that is the correct thing to do, thx anyways
lopiop said:
I just wanted to know if that is the correct thing to do, thx anyways
Click to expand...
Click to collapse
If you flash a Stock ROM coming from a CM7 ROM it is recomended to do a wipe before flashing, and vice versa, or else it will get stuck on boot loop.
vcrp94 said:
If you flash a Stock ROM coming from a CM7 ROM it is recomended to do a wipe before flashing, and vice versa, or else it will get stuck on boot loop.
Click to expand...
Click to collapse
I have to add: that happens due to the different file system. Cm7 uses ext3 I believe and stock roms something else.
Sent from my Optimus 2X using xda premium
folks iam kind of stuck at bad position. i recently found my old g1 figur i mess around with and see if i can install a rom, so start following couple of guides.. i get my phone rooted then i install A-ROM recovery then i install bootloader and then the radio 2.22.28.25.. then i was flashing roms and for some odd reason none of them worked like some goo up to boot animation and then get stuck in boot animation for infinite time or some wont get past G1 screen.. any one who went through this or knows the answer kindly help i am somewhat technical guy but not very. any help is appreciated.
Make sure the ROMs you choose support your radio/SPL if not you may need a different kernel. Also do complete wipes, fastboot erase system -w or a super wipe is best.
Sent from my Nexus 7 using xda premium
demkantor said:
Make sure the ROMs you choose support your radio/SPL if not you may need a different kernel. Also do complete wipes, fastboot erase system -w or a super wipe is best.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
thanks for the reply dem... so i went on g1 roms and downloaded roms that stated these SPL .....13d and radio 28.25 and i have that boot loader and radio so when i flashed the rom and the custom kernel directed by the guide it boot up but for some reason both of the roms that i tried keep looping the boot animation.. also when i touch the buttons they do light up even the keyboard lights up.. i still dont understand why is every rom i try to install is looping.
could you guide me kindly, if you have clue why is this happening
Hi,
I would like to begin by thanking all the CM 10 developing team for their fabulous work!
Also, I'm sorry if this is a repost or posting in the wrong area. I searched allover but no one has had this issue on this device. I finally had to make a account as this is my first problem that's why I could not post in the development question.
I recently got the HTC Vivid. I did everything required to install Cyanogenmod mod, i.e. install rom, (I'm S-On) fastboot boot.img, etc...
After I had the phone setup and apps installed, I rebooted the phone. The phone stuck on the Cyanogenmod logo. I knew there was a problem after it did this twice. So, I booted into recovery to reinstall the rom after a full wipe. When selecting "choose zip from internal sd card", it gave "cannot mount internal emmc". I knew I had to start from the beginning as this is a soft brick. So, I relocked the bootloader, reverted to stock, then did everything again.
Again it did the same thing but this time it mounted the internal emmc but it would not boot past the logo.
I tried looking allover, even in other device forums, I did not find anything. PLEASE HELP!
JUST FYI, I AM NOT A DEVELOPER AND ALSO NOT A NOOB! I have rooted all the devices I have owned and I know what I'm doing for the most part. This is the first problem I have ever encountered!
Thanks
mubby93
Sounds like you are using clockworkmod
Uhhh...
Get twrp or the other recovery...
Then flash that...
Boot to recovery
Mount via USB in recovery
Let windows tell you it needs formatting and format it
Burn incense... pray to deity of choice...
Do happy dance
Sent from my Vivid 4G using Tapatalk 2
I will give that a try when I get home.
Is the problem from cwm then?
Isn't it recommended to use cwm with cm?
Sent from my HTC Vivid
No... CWM is not recommended...
Its unofficial and breaks partitions
Sent from my Vivid 4G using Tapatalk 2
We seriously need to remove all links to cwm for this phone
Sent from my Vivid 4G using Tapatalk 2
rignfool said:
Sounds like you are using clockworkmod
Uhhh...
Get twrp or the other recovery...
Then flash that...
Boot to recovery
Mount via USB in recovery
Let windows tell you it needs formatting and format it
Burn incense... pray to deity of choice...
Do happy dance
Sent from my Vivid 4G using Tapatalk 2
Click to expand...
Click to collapse
I did all the above! This time it is stuck on the logo for the first boot up...
I also did RUU back to stock, locked bootloader and did it again.. same result
EDIT:
I did it again and this time it worked! It even rebooted properly. Thanks!