Database Develop

How to Flash Stock Rom

WARNING: Internal SD content will be erased
To begin with go here and download the ROM of your country/region
Secondly download smartflash and drivers from here and install them
Now run SmartFlashTool_P990.exe
Turn the phone off,remove the battery and connect the phone to pc via usb while holding down the vol.down button.
Now you should be able to see the software upgrade screen, and COM port of smartflash will change automatically.
Now in smart flash select "ROM Copy D/L"
Make sure that "Normal Mode" is checked and "Erase Cal" is NOT checked
In AP Bin click browser and select the (BIN) file
In CP Bin click browser and select the (FLS) file
Click start, sit back and wait
I'll try to remember next time that I return to stock rom record it and upload it
Here is the video I said i would record

Yes i do it many time and works very good.
The flash take about 7 minutes

I. Thought you had to nvflash to put stock rom back on device? Or is that just if the phone is bricked?
Sent from my LG-P990 using XDA Premium App

thatguychris said:
I. Thought you had to nvflash to put stock rom back on device? Or is that just if the phone is bricked?
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
Follow my instructions and everything is gonna be ok

nice tutorial. well done. thanks for sharing

Optimus2XPrime said:
Follow my instructions and everything is gonna be ok
Click to expand...
Click to collapse
I'm going to trust you and try this later
Sent from my LG-P990 using XDA Premium App

thatguychris said:
I'm going to trust you and try this later
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
IIt seems that today I'll flash uk 10d ROM and i'm thinking of making a video!

Optimus2XPrime said:
IIt seems that today I'll flash uk 10d ROM and i'm thinking of making a video!
Click to expand...
Click to collapse
Would you be able to share the link in this thread if possible? I have used nvflash before but smartflash is much easier. I'm on modaco fr17 at the moment.but want to go stock again ready for update if it ever happens
Sent from my LG-P990 using XDA Premium App

thatguychris said:
Would you be able to share the link in this thread if possible? I have used nvflash before but smartflash is much easier. I'm on modaco fr17 at the moment.but want to go stock again ready for update if it ever happens
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
lucky i have made nandroid backup on my stock rom too ~~...

gliew_87 said:
lucky i have made nandroid backup on my stock rom too ~~...
Click to expand...
Click to collapse
That's what I will do this time I think saves alot of hassle, have you tried the smartflash method?
Sent from my LG-P990 using XDA Premium App

Hello,
Sorry for my english.
Yesterday, i want to flash the new 606 baseband on my LG O2X.
I use smartflash but i was wrong in using this program.
I have cheked the box "Erase CP" and now my O2X does'nt find the network. My phone send "carte incorrect" or "No network".
My SIM work in another phone and another SIM work in my phone.
I try to flash all the other baseband like 208, 318 or 405 but each time the problem is the same, i have no network.
I don't know what to do.
Thank you.

thatguychris said:
That's what I will do this time I think saves alot of hassle, have you tried the smartflash method?
Sent from my LG-P990 using XDA Premium App
Click to expand...
Click to collapse
for flashing baseband yes, rom nope yet.

Video Added

I can not get the Software Update on O2X
hi i am new in this forum, after checking video i thought i got the solution.
i downloaded all the require software for example smartflash and its drivers.
once i connect the usb and hold down -volume key nothing happens. in video the phone goes into software update.
Please guide me what trick i am missing basically.
By the my phone always get reboot automatically and i am using V10b just upgrade it from LG, before on V10a it was working fine.
Thank you in advance and looking forward to hear from you guys.

atiqkh said:
hi i am new in this forum, after checking video i thought i got the solution.
i downloaded all the require software for example smartflash and its drivers.
once i connect the usb and hold down -volume key nothing happens. in video the phone goes into software update.
Please guide me what trick i am missing basically.
By the my phone always get reboot automatically and i am using V10b just upgrade it from LG, before on V10a it was working fine.
Thank you in advance and looking forward to hear from you guys.
Click to expand...
Click to collapse
You have to turn off your phone, connect it to usb and press the vol.down button at the same time

Optimus2XPrime said:
You have to turn off your phone, connect it to usb and press the vol.down button at the same time
Click to expand...
Click to collapse
basically my phone always reboots, even i do hard restart it stuck on LG logo or sometimes at initialization. even with hard restart it does not start.
i did all the procedure that you mentioned...turned off the phone and hold down -volume key and plug usb...nothing happening. but when i hold volume key + and - my laptop detect phone with APX. but nothing after that....any suggestion on this.
Thank you

@Optimus2xPrime Thanks for the tutorial and making of video.
Sent from my LG-P990 using XDA App

I do with several time it always die at 50% with message "time out error" how to solve this problem ?.

You can't use the app Rom Manager to do this?

Nice the tutorial and video!!
Big Help...
Thanks!!

Invalid software package

I got a new update install according to the phone bit once i download it it gives me invalid software package. The pack is 4.5mb and my baseband is from 04/06/2011 so i guess its a new baseband vs my fw is 10c i tried with LG mobile update but he says that i am running the latest (not the greatest)
I am really thinking about costum Rom LG are really disappointing me
P.s i tried playing back and forword with the clock to get the update again still bust
Anyone has an idea about this issue or should o wait for gingerbread ?
Thanks a lot for you're help
Sent from my LG-P990 using XDA App

Do you have a Custom Recovery or are you Rooted?

iam rooted , but running stock LG 2.2.2 with BB 20110405 v1-b
should i remove the root and try again?

Don't worry, it's nothing just do the update from LG PC Suite

Optimus2XPrime said:
Don't worry, it's nothing just do the update from LG PC Suite
Click to expand...
Click to collapse
i cannot the LG pc suite says my phone is up 2 date
maybe its because i got clockworldmod installed , but no custom rom?

Still cannot update any ideas about it?
Sent from my LG-P990 using XDA App

i read somewhere did because i have removed system apps i will not get ota anymore is that so?
could that be the reason? i didn't freeze anything just removed them permanently.
if so how can i get back to the original STOCK LG (the easiest way)
because then i can just restore my backup and i am done.

Perform a SmartFlash.
Sent from my LG-P990 using XDA App

shpapy said:
i cannot the LG pc suite says my phone is up 2 date
maybe its because i got clockworldmod installed , but no custom rom?
Click to expand...
Click to collapse
The problem is because you have CWM on the phone,
I had the same issue.
you have to remove CWM (don't know how to do that).
Or do a flash with smartflash back to V10A and then you can update to V10B and then again to V10C.
You are from the netherlands you can also look here: http://gathering.tweakers.net/forum/list_messages/1453370 (is in dutch)

thanks,
i just flashed with 0614 bb and new kernel (BIN_LGP990AT-00-V10c-EUR-XX-APR-16-2011+0)
restoring now the backup

[GUIDE]Installing Gingerbread on Thrill and back to Stock (Updated 11/23)

1. Phone must be rooted and have CWM recovery installed
2. Download Rom of choice and place on internal sdcard
3. Make sure all LG drivers and software are removed from computer
4. Install LG Flash Tool
5. Install Drivers
6. Remove phones battery, sim, and sdcard
7. Hold volume + button while plugging in phone (keep holding volume + until phone is recognized)
8. When asked for location of drivers choose the correct location (this will ask twice) Should be C:\Program Files\LG Electronics\LG Android Driver
9. Right click on My Computer and select manage
10. Click on device manager
11. Click on ports and then right click on the phone port and select properties
12. Click on tab for ports settings and click on advanced
13. Change port to 41 and click ok
14. Unplug phone from computer
15. Run LG Flash tool by selecting the alternate .exe file
16. Select the appropriate .dll file and select the appropriate .fls file for the S/W, select the USB button for connection mode, click ok
17. Select the picture up top that looks like a printer cable and select port 1, click OK
18. Click on the yellow arrow up top and make sure port 1 says ready
19. While holding your volume + button, plug in your usb cable and hold volume + until port 1 shows some activity
20. Process should run until 22% and then say failed. Choose the red circle with a minus sign to exit.
21. Unplug USB from phone and insert battery, sim, and sd card.
22. Boot phone and after booted power down.
23. Boot into CWM recovery and wipe data/factory reset, wipe dalvik cache, install zip from sdcard, choose zip from internal sdcard, select Rom. Reboot system and enjoy.
Hopefully this simplifies things for those of you that are trying to get Gingerbread installed. If you need screen shots for certain parts I will try to help out.
Watch Video and follow steps above "http://youtu.be/ExwoHC5pOiQ"
To get back to stock just use the V10e .fls file and then load the stock rom from CWM recovery.
For factory stock try this http://forum.xda-developers.com/showthread.php?t=1270832 after the baseband is restored
Files you will need to Flash Baseband from Froyo to Gingerbread and Back http://www.mediafire.com/?c2i2f4c9sz8u8z2
Froyo baseband for Brazil below. Might help users not getting signal in Canada or Latin America.

Just for the record, I'm not taking credit for anything other than just putting the information already out there into simple step by step directions that I used.
Sent from my LG-P925 using XDA App

Read through thread seems to be unstable....is this what your experiencing?
Sent from my LG-P925 using xda premium

smartzmc said:
Read through thread seems to be unstable....is this what your experiencing?
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
It actually seems great to me. Battery life is improved a little, plus you have some added features and a better camera. So far I've been happy.
Sent from my LG-P925 using XDA App

Nice,,, post some pictures of new features?
Sent from my LG-P925 using XDA App

dcmcc99 said:
It actually seems great to me. Battery life is improved a little, plus you have some added features and a better camera. So far I've been happy.
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
I've heard really good things about the camera. They say its a lot faster.
Sent from my LG-P925 using Tapatalk

I'm installing xp right now to try this
Sent from my LG-P925 using XDA App

dcmcc99 said:
It actually seems great to me. Battery life is improved a little,
Click to expand...
Click to collapse
That's it? A little? That's not very encouraging. I've been waiting to see how GB improves battery life but if it's just 'a little', that's not good. I'm going to just return this damn thing.

hidarez said:
That's it? A little? That's not very encouraging. I've been waiting to see how GB improves battery life but if it's just 'a little', that's not good. I'm going to just return this damn thing.
Click to expand...
Click to collapse
By a little, I mean about 3-4 hours. It's not life changing but any improvement was needed.
Sent from my LG-P925 using XDA App

Great guide man it worked like a charm idk if i had to but i installed the omap flash installer also. Also after everything i edited the flex file and apn and everything seems to be working great. Ill report back once i get a day or do with it.
Sent from my LG-P920 using XDA App

been using for 2 days its not a way better battery experience but a very stable and clean GB for thrill

So, everybody confirm that Thrill p925 can upgrade to 2.3.5 leak as instruction? Sorry for noob question, cuz i have just bought it one day. And in my country Vietnam, there is no way to get warranty or replacement. But i kinda want to be on 2.3.5 ^^

civi309 said:
So, everybody confirm that Thrill p925 can upgrade to 2.3.5 leak as instruction? Sorry for noob question, cuz i have just bought it one day. And in my country Vietnam, there is no way to get warranty or replacement. But i kinda want to be on 2.3.5 ^^
Click to expand...
Click to collapse
If your phone is rooted and has CWM recovery installed, then yes it will work.
Sent from my LG-P925 using XDA App

How do I check if my phone is rooted? (I'm sorry I recently started looking into this)
Sent from my LG-P925 using XDA App

Did you use superoneclick to root it? And do you have cwm? If you do odds are your rooted! Btw I'm loving GB super fast and smooth. I'm using coh'a lite rom instead of the Acura one the only problem I have with it is that Swype keeps force closing so I had to install some other swipe keyboard from the market, but its not a bad tradeoff
Sent from my LG-P920 using XDA App

dcmcc99 said:
If your phone is rooted and has CWM recovery installed, then yes it will work.
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
How about 3g signal? My country only has 3G with 1900 mhz. Now i am very exited. Downloading has almost done ^^

i have been having trouble with step 16
can you clarify on what i have to do for the step with lg flash tools and were to find the correct files

If I update the baseband and use this method to flash an O3D GB rom and dislike it, will I be able to use a nandroid backup to go back to a useable state?
tl;dr - Will a nandroid restore reverse the baseband change?

Tyqar said:
If I update the baseband and use this method to flash an O3D GB rom and dislike it, will I be able to use a nandroid backup to go back to a useable state?
tl;dr - Will a nandroid restore reverse the baseband change?
Click to expand...
Click to collapse
no i think you will still need to flash froyo baseband

thatruthiz said:
no i think you will still need to flash froyo baseband
Click to expand...
Click to collapse
Yeah i also think that. But it looks hard to find froyo baseband for P925?
We should use XP to flash bootloader rather than win7, shouldn't we?

[information] GB is released for p920

Link to thread http://forum.xda-developers.com/showthread.php?goto=newpost&t=1355879

Already installed and its working for the thrill

josuelopezv said:
Already installed and its working for the thrill
Click to expand...
Click to collapse
A bit more specific...
Sent from my LG-P925 using XDA App

I downloaded the file from Lg Server
Followed the guide on how to install a KDZ files (link posted above) thanks to adixtra
When the phone rebooted it when into a bootloop so i removed the battery put it back on and went into recovery (volume down + 3D button + power button) wipe data and factory restore
reboot the phone and now I have gingerbread
did a superoneclick root access to gain root
installed CWM again
added the APN's and did a titaniumBackup batch restore and now everything its working and with the nice features
working on a rom for the thrill to add windows FX and other things

Are you able to go back to stock froyo afterwards? All features work? 4G, gps, mms, etc. Also, will there be a need to go to stock and grab the OTA gingerbread update for the thrill when it is released? Thanks in advance.
Sent from my LG-P925 using xda premium

Mart1an said:
Are you able to go back to stock froyo afterwards? All features work? 4G, gps, mms, etc. Also, will there be a need to go to stock and grab the OTA gingerbread update for the thrill when it is released? Thanks in advance.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Yes you can go back to froyo just by doing the exact method but selecting the KDZ file for froyo.
ALL the features works (this is the live official update LG is pushing to european handsets) i have tried everything on my thrill and its working. (As I said before I can't test 4g so you can go ahead and try) obviosly have to set the APN lists manually because you are flashing a debranded (optimus 3d) firmware instead of the AT&T
I suppose that AT&T will release the Official Thrill firmware in the first week of december but unitl then you can install this update risk free and have the advantage of running the new gingerbread roms without going into the hassle of flashing the baseband alone with an XP machine and all that hard work.
Anyone else has installed this on there Thrill besides me? someone in the US so can test the 4G?

I am thinking about doing it. But don't wanna get stuck because I am new to android and I am going to be getting a new phone thru warranty. I figured its perfect to try since i will be replacing this phone anyway, just wanted to make sure I could go back to stock first. Maybe I will try it tonight. I am currently running "Thrill Seeker" custom rom. Do I need to go to stock before doing this?
Edit: also, sorry if this is a stupid question, but does this come with 3D converter?
Sent from my LG-P925 using xda premium

Still can't connect at even 3g at home with the new 920 update. So I doubt 4g will even work

Mart1an said:
Do I need to go to stock before doing this?
Edit: also, sorry if this is a stupid question, but does this come with 3D converter?
Click to expand...
Click to collapse
Yes it comes with 3D converter, flash in the 3D camara, camara button remapped, etc ..
jznomoney said:
Still can't connect at even 3g at home with the new 920 update. So I doubt 4g will even work
Click to expand...
Click to collapse
Did you add the APN's ??

I'm not gonna bother with it then. I do need to try a different rom tho. Using Thrill Seeker and I like it but the DPI setting is too small for me.
Sent from my LG-P925 using xda premium

On my version of gb with 4g... bugs are have to use 3rd party dialer and the 4g works but not the signal bars just as others have reported. ill try to upload next day or two. You still have to flash kdz or baseband befire installing gb roms
Sent from my LG-P925 using XDA App

You can use dpi changer for that.
Sent from my LG-P925 using XDA App

I can confirm this is working on my ATT branded LG thrill.
Once i loaded the ROM it automatically restart the phone but stayed lg screen for long time,.I had to power+vol down+3d button to go to recovery mode and did factory reset ..working like charm.

adixtra said:
Link to thread http://forum.xda-developers.com/showthread.php?goto=newpost&t=1355879
Click to expand...
Click to collapse
Dear friends,
I tried to install by this method but did not continue the installation. There was a message "there is sufficient charge in the battery, recharge the device to continue", the battery has 80% load, it is normal that message appear?
This rom is for the LG Optimus 3D P-920. She will work on AT & T P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, etc.)

I was at 72 when I started. Went fine.
Sent from my LG-P920 using Tapatalk

Well, after flashing last night and spending some time using it, and getting some calls, so far so good.
Everything seems smoother overall, with less freezes. App compatibility seems better, and there is a definite difference in battery life.
Call quality and signal strength seem overall about the same, bit I thought it was pretty good before. Not quite as strong as my Atrix in bad areas, but not enough to bother me.
The only thing I haven't tried yet is 3g, or fauxG if you want to call it that. We have edge only at home. When I go back to work Monday I will be able to test that.
Sent from my LG-P920 using Tapatalk

This rom is for the LG Optimus 3D P-920. She will work on AT&T 4G thrill LG P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, Clockwork recovery, etc.)

stonyperson2 said:
This rom is for the LG Optimus 3D P-920. She will work on AT&T 4G thrill LG P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, Clockwork recovery, etc.)
Click to expand...
Click to collapse
There is no need to install anything beforehand the KDZ file has everything needed although it is recommended that after flashing to do a factory reset through recovery. It is in deed for the p920 but it works as well for the p925 although some users report the signal drops a little for the 4g although it works. Everything else function pretty well and most important battery life is longer.
---------- Post added at 10:34 AM ---------- Previous post was at 10:33 AM ----------
stonyperson2 said:
Dear friends,
I tried to install by this method but did not continue the installation. There was a message "there is sufficient charge in the battery, recharge the device to continue", the battery has 80% load, it is normal that message appear?
This rom is for the LG Optimus 3D P-920. She will work on AT & T P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, etc.)
Click to expand...
Click to collapse
If you have CWM you can try this:
-Charge the battery to 100%
-reboot to recovery
-wipe battery stats
-retry to apply the KDZ file

josuelopezv said:
There is no need to install anything beforehand the KDZ file has everything needed although it is recommended that after flashing to do a factory reset through recovery. It is in deed for the p920 but it works as well for the p925 although some users report the signal drops a little for the 4g although it works. Everything else function pretty well and most important battery life is longer.
---------- Post added at 10:34 AM ---------- Previous post was at 10:33 AM ----------
If you have CWM you can try this:
-Charge the battery to 100%
-reboot to recovery
-wipe battery stats
-retry to apply the KDZ file
Click to expand...
Click to collapse
thanks to two. Although I have not CWM, because my device does not install it by any method posted here on xda. (Rom manager, ADB, nothing).
Edit.
Thank you guys,
gingerbread successfully installed.
Now, CWR.
(???)

i flash my 925 with the kzd rom for 920,and my device's name change from 925 to 920 .at first ,seem all right ,and smooth,but today ,found bluetooth wrong ,can't open ,enles reboot,wifi have the same problem too.sorry for my english

Ice Cream Sandwich Update

Just a head up guys. Official Ice Cream Sandwich came out for Lg optimus 3d, and you can easily get it on your Thrill by using Lg Flash tool found here <http://forum.xda-developers.com/showthread.php?t=1491870>
kdz file is here <http://forum.xda-developers.com/showthread.php?t=2185406> have fun with ice cream sandwich!

ICS
Did you flash this for the thrill? Any extra steps to get it fully working on the thrill?

All you have to do is change the kdz file name to similar formats like other ones
Sent from my LG-P920 using xda app-developers app

ICS
I got it flashed and it works great. Everything is fully functional on the thrill so far that I tried. It is a nice change over GB for sure. If anyone is curious how to flash this, here was my method...
1.) Get the KDZ file from here (http://www.android-files.de/P920V28B_00.kdz) and rename it to V28B_00.kdz.
2.) On this page (http://forum.xda-developers.com/showthread.php?t=1491870) go down to number 3 and set up Lg Flash Tool EXACTLY how it says.
3.) Select the renamed kdz file you just downloaded in the lg flash tool program and let it do it's thing.
4.) On my first bootup it stayed on the bootlogo forever and just would not start up so save yourself some time and do a factory data reset before your first bootup and it will load up fine. The proper way to do a factory hard reset after flashing is to hold VOL DOWN + PWR till it vibrates and it will prompt you to press the power button twice to reset.
Everyone enjoy ICS on their Lg Thrills!

thanks so much!
I am running v20p stock, rooted and unlocked.
I suppose I can directly flash the renamed ics kdz?
And my thrill will be not rooted afyerwards, but still stays unlocked?
Sent from my LG-P925 using xda app-developers app

As long as you follow all the steps above it will flash with no issues. Root and recovery are lost but I think there is a method to get both of them already. I will try to root and recovery later today. As far as staying unlocked after flashing, I am using straight talk so I didn't have to unlock. Hopefully someone else can help you out on that one.
Sent from my LG-P920 using xda app-developers app

ktan.us said:
thanks so much!
I am running v20p stock, rooted and unlocked.
I suppose I can directly flash the renamed ics kdz?
And my thrill will be not rooted afyerwards, but still stays unlocked?
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
just look in the optimus 3d thread everything you need is there i wouldnt even bother lookimg in the thrill thread anymore

at&t released ics today for thrill
Sent from my SAMSUNG-SGH-I747 using xda premium

kornklown69 said:
at&t released ics today for thrill
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Wow, I had given up hope. I will try it out since the ported ICS I've been on has some lingering issues with MMS and camera.

kornklown69 said:
at&t released ics today for thrill
Click to expand...
Click to collapse
Does that mean the "Software Update" on a stock GB Thrill would install ICS?
Or maybe boot it into "Emergency Mode" (or whatever it is) and using the official LG Tool would work to get ICS without having to do all the smallsrv stuff?
I guess what I'm really asking is, if AT&T officially released ICS, isn't there an easier way to install it?

If you are on stock maybe you can install using the LG Mobile Support Tool. Trying to use that from my ported ICS has messed my phone up though. I'll have to try to rebuild it tonight, hopefully just using the Flash Tool to flash the bin and fls.

I flashed the Korean ICS, hated the bugs, and reverted to GB.
Trying to use the LGMobile Support Tool to install official ICS and it fails. So I guess I'll have to flash the kdz manually.

The Mobile Support Tool appeared to be working for me, until it tried to reboot and I got an "Encryption Unsuccessful" screen.
Now I've used the bin and fls from here - http://forum.xda-developers.com/showthread.php?t=2198069
After flashing the above with LGFlashTool, I still booted into the "Encryption Unsuccessful" screen, but powered down by long-pressing Power, then turning back on into factory reset mode with Volume down + Power. Following the reset, I appear to be running okay now.
Edit: Nevermind, having an issue , the phone won't work with either of the microSDs I have around. First it's saying they need to be formatted so I attempt that. Then it says the card is damaged.

osoryw diforder
ewtdr said:
The Mobile Support Tool appeared to be working for me, until it tried to reboot and I got an "Encryption Unsuccessful" screen.
Now I've used the bin and fls from here - http://forum.xda-developers.com/showthread.php?t=2198069
After flashing the above with LGFlashTool, I still booted into the "Encryption Unsuccessful" screen, but powered down by long-pressing Power, then turning back on into factory reset mode with Volume down + Power. Following the reset, I appear to be running okay now.
Edit: Nevermind, having an issue , the phone won't work with either of the microSDs I have around. First it's saying they need to be formatted so I attempt that. Then it says the card is damaged.
Click to expand...
Click to collapse
I had the same problem. You need to go to settings - storage and clear both memories. After that, everything is going to be ok. Do you know how to root this official ICS version? (Already tried the adb and unlock root methods to no avail)

Jcman8309 said:
I had the same problem. You need to go to settings - storage and clear both memories. After that, everything is going to be ok. Do you know how to root this official ICS version? (Already tried the adb and unlock root methods to no avail)
Click to expand...
Click to collapse
Thanks! I just stumbled into this and was coming to add the fix too! Both cards back !
I was going to attempt this method for root, but haven't tried yet - http://forum.xda-developers.com/showpost.php?p=39338374&postcount=3

I got the KDZ flashed. Running Official unrooted AT&T ICS now.
However, it seems I didn't do a factory reset and didn't NEED to. It's running just fun.
My system ROM is 619MB with 7.38MB free.
I'm wondering if that's normal... That's going to make some things pretty tough. (Guessing unsintalling Gulliver's Travels and that other crap will help)

I did the reset. My system memory is showing 102 MB of Apps (I installed a handful of things already), and 770 MB available.

ewtdr said:
I did the reset. My system memory is showing 102 MB of Apps (I installed a handful of things already), and 770 MB available.
Click to expand...
Click to collapse
I meant System ROM, not internal.
And odd, finally rooted, browsing SystemROM with ES File Explorer. Gulliver's not there. Biggest app is Golf and LG Home at 16MB each...
I remember someone made an app to get rid of most of the AT&T crap. That still work for ICS? I remember AT&T Contacts is required. Don't remove that...
Every boot takes a LONG ASS time, about 10 minutes, to scan my media. That's with no SD card inserted. I might do a factory reset.

ewtdr said:
Thanks! I just stumbled into this and was coming to add the fix too! Both cards back !
I was going to attempt this method for root, but haven't tried yet - http://forum.xda-developers.com/showpost.php?p=39338374&postcount=3
Click to expand...
Click to collapse
no problem...
thank you! but that method does not have instructions and does not seem safe enough...
everyone keeps talking about this rom but no one is saying how to root the rom and no one is pointing out the 3D Converter problem, it does not work at all!!! it works the same way as the xbsall port LOL! and when it does, you can't adjust the brightness...:silly:
Its basically the same version as the xbsall port (v30b) but for some reason it cannot be rooted through the same methods...

I did a factory reset, and the phone stopped booting. Bizarre.
Anyways, I wiped everything but system, and reflashed the KDZ. It's booting now.
Then I flashed the ICS bootloader BUT I used the GB CWM v6. The other recoveries didn't seem to flash properly. So I'm stock rooted now. Now to remember what file to change to make the 3D button work as a shutter.