Database Develop

[PROBLEM] Camera autofocus not working

The camera autofocus indicator is supposed to turn green and then the pic will be taken. This happened the day i bought the cell. I changed to different shoot options and it worked.
At night i installed world card mobile, used it to recognise a business card. the autofocus feature worked and it recognised perfectly. i tried again with the same card, but this time the app hung and i had to do soft reset. I didnt use the camera again till the next day.
And thats when i realised that the autofocus feature was no longer working. The camera will make the focusing noise, the screen gets brighter, the navigation wheel lights up, but the white brackets do not turn green. Instead they display a red cross.
Having searched the forums, i found a few threads describing the same symptoms, but no solution. Someone mentioned using the camera application 6.01 from BEPEs rom... that didnt work for me.
I have done a hard reset using the original stock rom, latest shaks rom and duttys rom and bepes 0.99d rom... No relief...
Stock
ROM - 1.93.720.2 WWE
date - 8/7/08
Radio - 1.00.25.07
Protocol - 52.29.25.12G
DIAM140 64M
SPL-1.93.0000
I have the 2g EDGE only diamond.
Its under warranty, hopefully they will replace the cell, but i would prefer if a solution could be found. If possible, can some one who doesnt have this problem upload their camera.exe? Or am i being naive in assuming that simply replacing the camera.exe will solve my problems?
Thanks in advance,
Amith

Well, since you already tried to hard reset your device (multiple times even) and still it doesn't work, then you surely can rule out that it's a software problem...
I think you broke it my friend
If I was you I should go to the store where you got it since you have warrenty and all... One tip: flash your phone to the original rom (the rom you had when you bought it). If they see another rom on it, they probably won't help you

I had flashed it to the stock rom from the htc india site in the morning. Went to the shop in the afternoon. Today being a holiday, the shop was closed. Came back disappointed. Tried taking pics with the camera throughout the day. The focus only showed a red cross and the pics were clearly out of focus... And then...
It starts working again! On its on. I mean, I was hopeful something like this might happen, so I was trying taking pics every hour or so. And all of a sudden, the autofocus is back on. I took some 15 pics one after the other, only 1 pic [somewhere in between, dont remember which one] displayed the red cross, but even for that pic, the focus was proper...
The phone has had the stock rom for some 10 hours now. I dont know what caused the problem or what rectified it... I think i will play with it for a few more days, if it happens again, am going back to the shop.
Strange, eh??

strider.am said:
I had flashed it to the stock rom from the htc india site in the morning. Went to the shop in the afternoon. Today being a holiday, the shop was closed. Came back disappointed. Tried taking pics with the camera throughout the day. The focus only showed a red cross and the pics were clearly out of focus... And then...
It starts working again! On its on. I mean, I was hopeful something like this might happen, so I was trying taking pics every hour or so. And all of a sudden, the autofocus is back on. I took some 15 pics one after the other, only 1 pic [somewhere in between, dont remember which one] displayed the red cross, but even for that pic, the focus was proper...
The phone has had the stock rom for some 10 hours now. I dont know what caused the problem or what rectified it... I think i will play with it for a few more days, if it happens again, am going back to the shop.
Strange, eh??
Click to expand...
Click to collapse
I guess miracles do exist
Hope it stays in a working state! But you should go to the shop nonetheless, having it checked out... while you still have warranty

sonnybravo said:
I guess miracles do exist
Hope it stays in a working state! But you should go to the shop nonetheless, having it checked out... while you still have warranty
Click to expand...
Click to collapse
make sure u reflash the original SPL too, otherwise you warranty will be voided

mugglesquop said:
make sure u reflash the original SPL too, otherwise you warranty will be voided
Click to expand...
Click to collapse
Good point, 4got to mention that

as luck would have it, the autofocus aint working again... though there is some interesting news...
http://wmpoweruser.com/?p=3273
as per the above link, the touch pro received a minor rom upgrade that includes fixes for
The display of TouchFLO 3D sometimes may appear cracked.
When taking a picture, the auto focus function may malfunction in some circumstances.
In some circumstances, the preview screen will become black after taking picture.
In some circumstances, the device may hang while loading TouchFLO 3D.
Click to expand...
Click to collapse
is it possible to somehow find out what the fix was? maybe someone with a touch pro could download the rom and post its camera.exe?? maybe i should start a thread in the touch pro forum pointing to this post and request help there? what do you guys feel?
i took the cell to the vendor, he couldnt figure anything out. he said i was the first one to present this problem to him. the only option left for me is to take it to the service center where it will remain for atleast a week as per the vendor

Auto focus Polaris
I do have the same problme as you do. I tryed several things to repare this autofocus problem, but nothing is working! I m really disapointed in HTC. If they cant make a good auto focus, why do they try it!! I can't make good photos anymore with my Polaris, so i hope that this(touch pro file) will help to create a solution. I will not bring my polaris back to Htc because i dont want to lose all my progs and files!! Please find a solution !!! If it is a hardware problem HTC SUCKS!!!
Thanks for all!!

HELP!! my screen works....but it doesnt....

ok guys and gals, heres one for you. i know im a noob but this one has got me stumped and i cant for the life of me find anything in this or any forum or even google. i have the tilt. just flashed a cooked rom for the first time several weeks ago thanks to everyone on here and all the FAQs and stickies. (to any other noob, all the info is out there!!!!! dont be lazy!!! SEARCH AND READ YOUR HEART OUT!!!!) anyway, im running Witscheys latest 6.5 rom build 23071 HSPL 3.34 w/ radio 1.70.19.09. ive been tweakin it pretty much every day tryin to get it to the way i want.
well im so close to finishing and the the screen suddenly decided to randomly not respond to my touch. the buttons were the only way to control the phone. even after numerous soft resets. then it would decide to start responding. so i was doing some research and tried a couple diff methods of fixing "screen freezes" (but i dont think its a "screen freeze" as it worked fine with the use of the buttons) finally found a post in the thread for the room that read:
Originally Posted by cpala
Hi witschey,
I work with you rom a week a go, but sometimes the device screen freeze.
ugoff
Member
I had that same problem. Need to change the cache settings in Advanced Config. The filesystem cache defaults to 512kb, so I set it to auto and it doesn't freeze anymore. I also turned up the glyph cache to 32kb. Between the two, the phone interface runs fast and smooth.
so i tried that and it still didnt fix it. then i decided to just do a hard reset and install one app a day at a time (all the ones i had before the hard reset) to see if one of them was casing it. well after the hard reset i didnt notice the problem anymore. i was stoked. now all i needed to do was figure out which app was giving me trouble. WELL about 10 min later when i was texting my friends as usuall, my phone recieved a message but the screen was black. so i slid it open (wake on slide) and the screen turned on. replied to my buddy,closed the lid and the screen went black..... WTF? slid it open, screen on. closed, screen black.... and so forth. this is the way it has been since yesterday. even tried two more hard resets with no change.
NOW HERES THE WEIRD PART!!! if i slide it open JUST A LITTLE very slowly, the backlight turns on barely. just enuf to see the today screen but its very very dim. its as if there is a bad connection. but the screen is in portrait mode like it should be. if i open it fast the backlight turns on, screen shows portrait, then switches to landscape like it should. close it, it goes black but i know it switches back cuz the next time i open it, i can see it change again.
EVEN WEIRDER--- if open landscape, get into an app or program such as contacts where i can flick to scroll, ill close the lid, immediately flick the screen, open lid and low and behold my friends are just scrollin by!!!! the damn screen is responsive but there is no backlight!!! so to test i plugged into my laptop, activated mymobiler, and EVERYTHING works like it should when i touch the screen, use the buttons, open close the lid. it all shows up on my laptop. but the damn screen is still black when lid is closed. so i can literally look at my laptop and touch the black screen on my tilt and controll it!! WHY IS THE BACKLIGHT SHUTTING OFF WHEN ITS CLOSED!!!!???
so then i decided to tear the damn phone completely apart about 2 hours ago, check all connections, and clean all the dust. all connections checked out fine, put it back together and still have the problem. i know there is a magnet and sensor that tells the screen when to rotate when the screen is opened or closed but its obviously working cuz it will rotate the screen. my guess was that some kind of registry entry has been changed somehow. but then i realized thats not it because the hard resets didnt fix it. now im thinking hardware...... IM SO SORRY THIS POST IS SOOOOOO LOOOONNNNGGG but i dont know what else to do. phone was working great up until yesterday and i cant have this!!! has anyone had this problem with this or any other device or even know which direction to point me in??? PLEASE HELP!!! thanks in advance for any replies!!! the quicker ther better

I think your flat cable is broken. Doesn't make connection when closed (no backlight), barely connects when opened (backlight on).
So I think you need a new flat cable...

I agree with blueflame... I think it has nothing to do withthe rom flash.. it sounds like your ribbon cable is "Starting" to go.. unfortunatly it will only get worse where it wont; read you memory card, and evenutally your Sim card as well (speaking from experiance here).... If you are handy with tools, you can try to but a new one yourself and install it... But there are also some shops aroudnthe world, aswell and some members here who may be able to fix it for you... for a price (and not, I am not one of them)... Sorry for the bad news bud.. but I personally would rather knwo that than hard resettign 100 times and nrto beign able to figure out the problem...

hey. thanks for the fast replies! thats not exactly what i wanted to hear but like Teej said, its better to know than messing around with something else. now by flat cable are you reffering to the biggest ribbon cable inside the phone that connects the screen half of the phone to the keyboard half? Or the connector that comes directly out of the screen itself (meaning i buy a new screen and install and all is well) or is it another cable? but i think those are the only two that have anything to do with the screen other then the one for the sensor/magnet. here is a photo to help point out which ones. i have the manual so i can grab more photos if needed. thanks again for the help so far. good stuff. we are getting somewhere!!
photobucket.com/albums/b145/kewljay223/tilt.jpg

since im not allowed to post outside links yet, type this-----> h-t-t-p-:-/-/-i-1-8-. (minus the dashes between characters) in front of the link in my last post in your address bar to create the ACTUAL LINK and it should take you to the picture.

Droid 3 screen stays black .

So the phone (XT860 Bell) has problems when I unlock it the screen stays black. The phone works though cause when someone calls I can still pick up as I know somewhat where the green button is. But for the rest I can't do anything.
The only way to get the phone back is to remove the battery and restart the phone. Then it works again.
Anyone else had this problem?

have you tried hard resetting it?

No will do so. But before doing that I thought maybe there is some simple solution.
After the update to 2.3.6 things went all a bit wrong I think.

If you got this after the update, I am quite confident data wipe will solve your problem. You can try wiping cache only first - this way you won't lose your configuration and might solve the problem. The update supposedly wipes cache, but maybe that didn't work properly while you were updating. Enter stock recovery and give it a try.

Hey thanks for the help. But just did a reset. Not sure what went wrong when I did the update. Did wipe. Annnnyways. Right now it's stable. Let's see if it stays like this.

Ok sadly the reset didn't fix it. It took a whole day to go black again but still happened.
Any other solutions? I am scared that it's a hardware failure...but let's hope not cause I am in Holland.

I have the droid 3 and the same exact thing is happening to me. Sorry to tell you this but it has to deal wit the connector between the keyboard and screen. I've taken mine to get checked by a "phone doctor" and they told me that. I will tell you this now ,since it is still in the early stages, it's going to get worse to the point that it will stay black. Get it fixed by a techy or get a replacement soon. Mine reached it's point today and I am going to need to get it fixed. Hope it helps.

Johnny2293 said:
I have the droid 3 and the same exact thing is happening to me. Sorry to tell you this but it has to deal wit the connector between the keyboard and screen. I've taken mine to get checked by a "phone doctor" and they told me that. I will tell you this now ,since it is still in the early stages, it's going to get worse to the point that it will stay black. Get it fixed by a techy or get a replacement soon. Mine reached it's point today and I am going to need to get it fixed. Hope it helps.
Click to expand...
Click to collapse
Doesn't sound good man :-(......
Though it happened a lot the passed days since the reset ( knock on wood) only once. Do wonder why it happens less now.

Yea you can reset all you want it's going to go blank. I had to right the dial pad numbers with marker on the screen just to make calls. I say get it fixed or replaced soon

I've got the same issue here. I know the thread is old, but I'm from the Netherlands (just like eezdva) and would like to know how to repair this.

lucaspr said:
I've got the same issue here. I know the thread is old, but I'm from the Netherlands (just like eezdva) and would like to know how to repair this.
Click to expand...
Click to collapse
If you can't take it back and want to try to fix it yourself you need to search for a droid 3 flex cable. The one you want has the front facing camera, front sensors and earpiece speaker on it. Then head on over to ifixit for a teardown guide (sorry no repair manual yet, I plan on working on one).
I have to add that taking this phone apart to replace this part is no small feat, and it would probably be better finding a phone doctor to do it for you, or just getting a new phone.
When you buy the part, request an OEM part, I have been sent cables where the front facing camera displays sideways, or doesn't work at all. Most also don't come with the front button deflector, and that has to be transferred from the old cable.
Hope this helps

Ok . Well I don't really know what the problem is. But it went away. Actually it started I think after applying the update . I got myself another external sdcard . At a certain moment I decided to remove it and things cooled down. It now actually never happens anymore.

Well I gues you're lucky!
My screen sometimes starts all scrambled and the phone doesn't power on. Sliding the screen a couple of time sometimes helpes, but most of the time I don't really know howto get the phone working again. I think it's more stable when I leave the phone 'slided out' (don't know the right word now).
And I searched Motorolas website and found 2 reparing companies in the Netherlands. They both are authorized by Motorola, as of such I think this repair will be in warranty.
I do have to send it for repair. I don't want to take it apart because of what bitz_dv said. I'll let you know!

No Fix
When I was gone on a short holiday my college got a call from the 'authorized' motorola repair center. They can't fix my phone. I need to pay 11 euro to get it back and that's it. I tried calling them but there was no answer.
I sended my phone in on 22 may 2012 and now they decided they can't repair it. I spoke to Ted from Negri Electronics who told me to get in touch with Motorola as my warranty is still valid.
I'm a little confused, where should I go if an official repair center can't fix my phone but do tell me the repair is within warranty..
What can I do? Besides ordering the parts and take the phone apart myself..
I started my search for the flex cable... I did repair a N97 once, within the warranty period and later on sended it in and they repaired it under warranty....
Is this the cable I'm searching for:
http://www.globaldirectparts.com/Motorola-Droid-3-XT862-Motherboard-Flex-Ribbon-p/mot1040660.htm

I am from Netherlands, and have the same problem with the screen, looks like many users from Netherlands do.. coincidence?
When i jst slide out the keyboard , a little bit is enough, and the screen goes black ( black screen of death ) it doesnt power on with power button.
I looked for a flex cable at ebay, and it surprised me , that cable is also doing the front camera, and speaker... My front camera wasnt working too, and speaker made strange sounds many times, so it could be that cable, but not sure.
Check my thread, i have also uploaded a video to make it more clear
http://forum.xda-developers.com/showthread.php?t=1955892

[Q] Screen sensor bug. Please help

Hello,
After a month of using Note, I take the bug, that make device unusable. Touch screen press themselves, without of contacting of my fingers in the left bottom corner (near button 'z' on screen keyboard). And it become more and quickly.
But this problem have the "solve": when I connect the phone via usb and charge it, bug falling away. But if I disconnect, they return.
I try a lot of roms and kernels, but problem have not solved.
In the program "Multitouch vis test" i find that sensor take pressure in pixels placed 1108-1109 y and 95-120 x coords. So, maybe I can stop processing of touch sensor in that rect? How can I do that and can I do that at all?
Maybe charging let the screen sensor to be less sensable? Can I do this via programm (or kernel)?
And I don`t understand is it the problem with screen sensor or usb?(usb module is mush sheaper).
Sorry for long thread and bad English.
Thanks in advance, Giggsoff

What bag do you mean? Is it made of leather?

Army92 said:
What bag do you mean? Is it made of leather?
Click to expand...
Click to collapse
Oh, sorry , I mean bug, error, but write "bag", in traslit.
Any bag can`t solve my problem. I buy one today to try .

Sent from my GT-N7000 using xda premium

No problem
Maybe you can try this and this

Thanks for links, but it don`t solve problem.
I record video, with my phone. May be it describe my problem
youtu.be / kXzTh0UB7oc

Just saw your video.
Looks really weird.
How long does this bug exist? From the beginning?

your sensor is very sensitive

I got that after month of using (two weeks ago) when playing "Order & Chaos Online", or maybe I start notice that. In the bottom right corner of screen (in landscape orientation) the button, that mean fire, was located. So I press it fast. But I get massages "select the target" when I don't press any key.
I was in hospital, when I notice problem, and it didn't falling away, when I connected the charge. But when I back home, connect there phone to charge it is disappeared. I mean, that it was result of my operations (I open the phone and clean, reinstall os), but it was only because I had connected the phone. Now, I try to use S-Pen, cause it lock touch screen, but it's hard and don't a way out. So I am going to return the phone. It's hard, because I am an international buyer - from Germany to Russia. Intresting thing - when I open my box I see, that on charge was words in Russia (maybe cause in it )
It's going crazy

Returning it back is a good solution, I think.
It's definitely a hardware problem.

Ok, thank you. I will do it next week. Sadly lose that amasing phone for a month or longer, but I shall have to do it.

When I had returned my old Galaxy S it just took 10 days until I got it back, so let's hope the best

[Q] Camera stopped working after screen replacement

Hello guys,
As the title says, I replaced my P880 screen because it had an awful crack on it. The thing is that after I changed it, back in my house I tried to take a picture, but it said that it couldn't connect to the camera, or something like that. This had happened to me before, so I restarted the phone and nothing, so after reading some blogs (no one exactly related to the camera problem) I decided to make a full wipe of my phone and restoring it to factory settings. Always hopefully, it didn't work so I realized that the guy who made the replacement might have forgotten to reconnect the camera socket (is that the correct name?), but I can't take it to the service center to get it fixed because they are closed on saturdays and I can't go on monday because I'm leaving the country for a few weeks.
So I was wondering if I can make this check in my house, which tools would I need and, the most important thing, what and where should I check that is connected to the mainboard.
Thank you very much in advance, really hope someone can help, as I need the camera :/

Check my repair thread in the general section. I list all the tools needed and am pretty sure you only need to remove the back plate covering the motherboard. The camera module should have a cable, follow it and make sure it is pressed in all the way.
sent from my amazingly awesome OnePlus One
don't forget to hit thanks!