Related
Ok so I'm running Darky's 7.5 ROM just loaded it and it's flying . i'm having issues connecting to my carrier. I"m from canada and run on a network owned by Sasktel. We get our phones from Bell and our current release is JL2 I think. I was running this ROM fine but wanted to see what all the hype was about .
Now the only problem i'm having is I can't register on my network and thus my phone isn't working as a phone, lol. can someone help me set it up. here are the frequencies we run on.
SaskTel
GSM - N/A
UMTS/HSPA - 850/1900
I went into the APN and set that up so I should have data I just need to get registered. I can see the network Sasktel but it wont let me register. I get the exact message when clicking on it
"Registering on Sasktel......You SIM card does not allow a connection on this network"
any help would be great, thanks
I tried going in here *#2263# but didn't know what to pick so I left it to automatic
I don't know.
When you flash back to official firmware, everything works fine again ?
This may sound funny but try 'sim unlock' your phone.
after flashing, your phone might have reverted back it's original lock which is to BELL.
I agree with the other reply stating for you to have your phone unlocked.
xxgg said:
I don't know.
When you flash back to official firmware, everything works fine again ?
This may sound funny but try 'sim unlock' your phone.
Click to expand...
Click to collapse
I unlocked my phone a while back and it's unlocked still, Network lock = off. and yes flashing to other roms specifically for my phone will work fine on the network. Is this because Darky's ROM is based on a European ROM JPY and i'm supposed to be running a Canadian ROM JL2?
Hi. I have a SGS straight from Sasktel here in SK. I checked my setting under 2263, and it is automatic (top one). After I checked it, it lost cellular connection for about a minute, then eventually came back (phew!).
adamge said:
Hi. I have a SGS straight from Sasktel here in SK. I checked my setting under 2263, and it is automatic (top one). After I checked it, it lost cellular connection for about a minute, then eventually came back (phew!).
Click to expand...
Click to collapse
awesome what happens when you go back into 2263 and click on the wcdma band, which ones are stared in there?I have 2100, 1900 and 900 starred but 850 is not.....Also could you post your APN settings. those are in settings, wireless network, mobile networks, access point names and then click on the inet.stm.sk.ca one and if it's not too much for you could you post them up here along with the wcdma band settings. Thanks bud
can we actually install darkys rom on BELL vibranat i9000M
i would like to find out if darkys Rom works with Bell vibrant thats i9000M from canada ?
well his rom is up and running fine yes, I just have to get the right setting to run on my carrier....I own a i9000m it's a bell phone that my carrier gets supply from. So yes his rom works great on this phone, it's so fast, I might try flashing a modem for the canadian phones and see if that works i'll post back
SOLVED - Sasktel (Bell) running Darky's ROM
So I figured it out, I was running JL2 and then flashed speedmod kernel to get 2e. I then upgraded to Darky's 7.5 ROM, when that came up I was unable to get on the network. I was getting an error "Sim doesn't allow connection on the network" error when looking in providers. anyways, I just flashed the JK3 modem and i'm back on the network with Darky's rom
I grabbed the modem from here.
http://forum.xda-developers.com/showthread.php?t=846237
I used JK3 because they were having issues with JK4 bricking for some reason and didn't want to risk it. now to just get JL2 modem some how
There is a JL2 modem floating around somewhere.
I am also running jk3 modem with xxJPY, love my phone now.
No more bridling issues
BlackDino said:
There is a JL2 modem floating around somewhere.
I am also running jk3 modem with xxJPY, love my phone now.
No more bridling issues
Click to expand...
Click to collapse
Me too, so fast and smooth
If we could get jl2 modem with darkys
Is there a way to get jl2. Modem working with darkys then it would be perfect if u do find it let us know and make a step by step tutorial how it's done from the scratch for newbees canadiens thanks
notoriouspk said:
Is there a way to get jl2. Modem working with darkys then it would be perfect if u do find it let us know and make a step by step tutorial how it's done from the scratch for newbees canadiens thanks
Click to expand...
Click to collapse
It's very simple, TURN OFF ANY/ALL lag fixes!!!!! Back your **** up. then you can begin
You phone should be unlocked but might not have to be.....mine was, you can grab sgs unlocker form the app market also, You have to be running 2e recovery. so check on that first by powering your phone off, wait till it's actually off, froyo vibrates when it's shut down. After it's off, hold volume up, home button and power till you see the i9000m then let it go. it should boot into recovery. If you were running Froyo then you will have a 3e recovery, we need 2e. Also you should check and make sure you can get into download mode, by powering off, volume down, home and power key. If you can't get inot download mode you have to fix that first. if you can proceed:
So grab the recent stable speedmod kernel from hardcore here DON'T get the development version:
http://forum.xda-developers.com/showthread.php?t=822756&highlight=speedmod
depending on how you want to flash grab either the CWM or the other one which needs to be flashed via odin. Flash either or and your phone should boot with 2e. follow the instructions hardcore has posted and make sure you hit the thanks button for him .
After we have 2e installed you can grab Darky's ROM located here:
http://forum.xda-developers.com/showthread.php?t=814091
I used the non wipe one and didn't have issues, make sure you back your **** up before flashing anything. If you notice battery drain after you flash you could flash the wipe version just to make sure. anyways, Follow Darky's instructions to the T and dont forget to thank him
After his ROM boots, I grabbed a modem for our phones (bell, sasktel) I used JK3 because the search wasn't working last night but found this morning a link to JL2....i'm not sure if this is legit JL2 because I haven't used it but give it a shot if it doesn't work flash another on top (I can confirm JK3 works)
JL2: http://forum.xda-developers.com/atta...1&d=1293577837
Grabbed that from a link Samdroid_G_S posted so thank him for that.
JK3: was from docs link located here:
http://forum.xda-developers.com/showthread.php?t=846237&highlight=bell
you can thank him for that. I used JK3 because of the issues JK4 was causing. I wouldn't use JK4 but that' up to you.
again you can use either odin or CWM to flash the modem. once you flash the modem you should be able to register on the network. you might not have internet, so you will need to go in and edit your access point name. Located in your phone here:
Settings | wireless and network | Mobile Networks | access point names
If it is blank click the menu button and New APN, all you need for sasktel's is a name, can be whatever and APN, the APN should be "inet.stm.sk.ca" without the quotes. Leave everything else default and save it. you will have to click the bullet after you created it so it knows to use it. should be good after that. For bell just do a quick google search for bell apn or bell access point name, i'm sure someone has posted on xda also.
I am not responsible if you brick your phone, this is entirely on you if that happens.
Thanks man
That's what I have been looking for . A step by step tutorial how is the rom working for you I will give it a shot . I hope sd card Won't die on me again .I can deal with other problems but what could u do when sd card dies
on u .Thanks!
Hey no problem, by default the voodoo lag fix is disabled but honestly you won't need it.....
Sent from my GT-I9000 using XDA App
Nice, one of the great posts ever on xda. Is there any advantage to running darky's ROM? My SGS on JL2 has been good, and battery life seems awesome now that I turned off automated email checking.
adamge said:
Nice, one of the great posts ever on xda. Is there any advantage to running darky's ROM? My SGS on JL2 has been good, and battery life seems awesome now that I turned off automated email checking.
Click to expand...
Click to collapse
Pretty much preference I guess. I love Darky's ROM but JL2 was good, Darky's seems faster it's built upon 2.2.1 and I read Samsung did some kernel upgrades so that's why it's faster. If you do try it out just make sure you can get into recovery and download mode first.
i can confirm that Darkys rom works, I'm running 7.6 atm. I did notice that the APN settings in my original settings were missing ports numbers for data.
I tried this and it did not work, I still don't have data connection and I am on Bell canada.
Are u still getting text's? If so then you are registered on the network, all you have to do is go into your access point names and create an entry, then highlight it after it's saved. See my post above
Sent from my GT-I9000 using XDA App
Hi Everyone,
Kies has updated my I9000 SGS to froyo from éclair and since then I haven’t had any access to either 2g/3G networks (except for a precious couple of hours). I bought the phone in the Netherlands and I am using it in Brazil, but this had not been an issue until the firmware update.
I have already hard-reset my SGS a few times , tried several froyo distributions and used several CSC with no avail.
Currently, my firmware is:
PDA: iI9000XXJPU
Phone: I9000XXJPU
CSC: I9000OXAJPU
Kernel:2.6.32.9 root sep-55 # 11
I’ve got signal (about -111dBm 1 asu), the phone has an imei, and it recognizes my SIM card, but as I said, it has no network connection.
After checking debug screen, I’ve also noticed the following info:
- Basic Information: No Service
- MM sate: NO_CELL
- CONN_STATE:Idle.
Anyone out there could help me out with this problem? I’ve really run out of ideas. Let me know if you people need more info on the current status of my SGS.
Cheers.
You probably need to enter the apn settings for your carrier
It has updated to Netherlands firmware modem and CSC they work in Brazil ??
jje
terranq said:
You probably need to enter the apn settings for your carrier
Click to expand...
Click to collapse
I've tried several times, with different carriers (meaning different SIM cards). It hasn't worked.
Any other idea?
JJEgan said:
It has updated to Netherlands firmware modem and CSC they work in Brazil ??
jje
Click to expand...
Click to collapse
As I mentioned, the phone was working perfectly fine under Eclair. Moreover, oddly enought, my wife's, who owns a UK orange SCS, is working perfectly over here under froyo.
I am afraid of bricking my SGS by trying my wife's SGS firmaware on mine, since is Orange specific. Does anyone see any problem with that?
Probably Ok with orange . But is their not a Brazil thread on here that may have more clues .
jje
I rooted my phone yesterday and when my phone wouldn't boot up the rom I installed, I tried to reinstall the backup I had.
After that didn't work, I used odin to flash a stock ROMI downloaded on the internet and it is working now.
The stock rom I downloaded upgraded my phone from android 2.3.3 to 2.3.6. I don't know if that would make a difference.
So after this was all done, I realised I can't connect to 3g or any mobile network.
Why is this?
How can I fix it?
I live in Ireland so maybe it has something to do with the Stock ROM being from a different country?
Sorry, I am a noob at this kind of thing.
If anyone could help me, I would really appreciate it.
Thanks in advance.
Spaffle said:
I rooted my phone yesterday and when my phone wouldn't boot up the rom I installed, I tried to reinstall the backup I had.
After that didn't work, I used odin to flash a stock ROMI downloaded on the internet and it is working now.
The stock rom I downloaded upgraded my phone from android 2.3.3 to 2.3.6. I don't know if that would make a difference.
So after this was all done, I realised I can't connect to 3g or any mobile network.
Why is this?
How can I fix it?
I live in Ireland so maybe it has something to do with the Stock ROM being from a different country?
Sorry, I am a noob at this kind of thing.
If anyone could help me, I would really appreciate it.
Thanks in advance.
Click to expand...
Click to collapse
Hey,
The CSC (what country the rom is from) doesn't matter, I'm running a stock 2.3.6 rom from the UK even though I'm in New Zealand
Try first going into
Settings -> About Phone -> Status.
Scroll until you see IMEI. If this is odd (maybe XXs in the number code or its different), then that explains why your phone can't connect to any network. Maybe from a bad flash- there a tutorials on these forums on how to recover your IMEI.
Also in this menu check your signal status- whether it says "Connected" or "Disconnected" in Network Status or whatever.
Alternatively, go to
Settings -> Wireless and Network -> Mobile Networks -> Access Point Names.
In here are your APNs- the network "gateways" that your phone connects to for 3G and so on. Make sure these are configured correctly- if not, your provider's website should tell you how to set these up nicely.
Hope I helped
Sent from my GT-I9000
For a while now my galaxy note has been losing mobile internet.
Ive noticed that data just stops working, sometimes i will lose the letter indicator is (H or 3G) but i can still make calls. Other times the indicator will still be there but data wont work. This happens maybe once every couple of days
I know its not the rom as it happened when i used slimbean and also happens on cyanogenmod.
I know its not the carrier as it happened when i was with T Mobile up until last month. Im on Three now and it does it just as much.
to rectify it i have to either switch off data then back on, if this doesnt work, i try aeroplane mode, if thise doesnt work i have to reboot the phone. If i reboot then data comes back straight away.
I wondered if an upgrade to the baseband would help. im on N7000XXLT3. my phone is unbranded and unlocked and was originally on TMobile when purchased.
I found this article:
http://androidromupdate.com/2013/07...xxlt9-landed-in-uk-samsung-galaxy-note-n7000/
which states
Select the exact stock firmware file according to your country of origin.
Unbranded Stock 4.1.2 N7000XXLT9 Firmware:
N7000XXLT9_N7000OXXLT3_XEU.zip - United Kingdom, Ireland
Click to expand...
Click to collapse
is this the rom i need to flash? i realize this will take me back to stock.
can i expect any trouble flashing this rom? ie brick?
thanks
try the XXLSO modem.
nokiamodeln91 said:
try the XXLSO modem.
Click to expand...
Click to collapse
any pointers?
What do you mean? There is a thread about modems.. Just search in Google for all radio n7000. Get the xxlso modem and flash it from recovery.
I have a HTC J ONE HTL22 and a few days ago I lost my network signal completely. Contacted my network provider everything was good,bought a new sim tried that and still no network. The day I lost it I went into the service menu #*#*4636*#*# and into Phone Information and was just trying some different network settings. I clicked select radio band...and I saw Euro Band,Japan Band,US Band ,AUS Band ,AUS2 Band. I tried US Band to see the result and than i lost that menu ,now I only see Automatic, Cellular(800-MHz Band) and PCS(1900-MHz Band). When I try Automatic it says Unsuccessful. The other 2 successfully work but don't give me my network back? I've done a factory reset and still nothing changes. When I manually search for a network,it comes up blank. before it showed Bell,Telus,Rogers etc. So it's defiantly something with my radio.
My cell is UNLOCKED, S-OFF, CID-11111111, HBOOT-1.54.0000, RADIO-1.23.11.0829 and CWM installed,running stock 4.2.2. So I'm wondering is there a way to reset my radio or any help on flashing a new radio? Thanks
WarSupport said:
I have a HTC J ONE HTL22 and a few days ago I lost my network signal completely. Contacted my network provider everything was good,bought a new sim tried that and still no network. The day I lost it I went into the service menu #*#*4636*#*# and into Phone Information and was just trying some different network settings. I clicked select radio band...and I saw Euro Band,Japan Band,US Band ,AUS Band ,AUS2 Band. I tried US Band to see the result and than i lost that menu ,now I only see Automatic, Cellular(800-MHz Band) and PCS(1900-MHz Band). When I try Automatic it says Unsuccessful. The other 2 successfully work but don't give me my network back? I've done a factory reset and still nothing changes. When I manually search for a network,it comes up blank. before it showed Bell,Telus,Rogers etc. So it's defiantly something with my radio.
My cell is UNLOCKED, S-OFF, CID-11111111, HBOOT-1.54.0000, RADIO-1.23.11.0829 and CWM installed,running stock 4.2.2. So I'm wondering is there a way to reset my radio or any help on flashing a new radio? Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51047999&highlight=htc+j+one+htl22#post51047999
clsA said:
http://forum.xda-developers.com/showthread.php?p=51047999&highlight=htc+j+one+htl22#post51047999
Click to expand...
Click to collapse
Thanks for the link. Today I tried to install a new radio through CWM. I pick the zip to install and after a few seconds it says complete...I reboot and my radio never changes. I've tried it through CWM and Rom manager. Am I doing something wrong?
WarSupport said:
I have a HTC J ONE HTL22 and a few days ago I lost my network signal completely. Contacted my network provider everything was good,bought a new sim tried that and still no network. The day I lost it I went into the service menu #*#*4636*#*# and into Phone Information and was just trying some different network settings. I clicked select radio band...and I saw Euro Band,Japan Band,US Band ,AUS Band ,AUS2 Band. I tried US Band to see the result and than i lost that menu ,now I only see Automatic, Cellular(800-MHz Band) and PCS(1900-MHz Band). When I try Automatic it says Unsuccessful. The other 2 successfully work but don't give me my network back? I've done a factory reset and still nothing changes. When I manually search for a network,it comes up blank. before it showed Bell,Telus,Rogers etc. So it's defiantly something with my radio.
My cell is UNLOCKED, S-OFF, CID-11111111, HBOOT-1.54.0000, RADIO-1.23.11.0829 and CWM installed,running stock 4.2.2. So I'm wondering is there a way to reset my radio or any help on flashing a new radio? Thanks
Click to expand...
Click to collapse
Anyone know of a way to get my Radio Bands back? or any other service number codes to possibly reset the Radio. Thanks
WarSupport said:
Anyone know of a way to get my Radio Bands back? or any other service number codes to possibly reset the Radio. Thanks
Click to expand...
Click to collapse
the same problem
anybody know how to fix it?
Possibly...
WarSupport said:
Anyone know of a way to get my Radio Bands back? or any other service number codes to possibly reset the Radio. Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2550929
This might be of a bit more value. It seems the prior link was for a different HTC One model. Above link is for M7. Check it out if you still need a radio/baseband.
I also realized your phone is a Japanese variant...I dont know if that makes a difference or not in compatibility, but I wanted to mention you could try using ADB to flash the radio/baseband instead of using recovery. I think you could also upgrade your firmware,which usually includes the baseband. Good luck...
Thanks for reply
Nothing help
flash radio through fasboot and TWRP does not matter
Same here...still no luck yet. Still have no network. Makes no sense why the radio bands cant be restored!?
many service centers, many ROMs nothing help