Hey, i made a BIG MISTAKE...
I flashed a stock kernel on a custom ROM (with sgs kernel flasher) but forgot to UNCHECK the reboot button.
now my sgs got stuck at boot.
3button combo won't work and kies isn't installed on this PC..
PLEASE HELP WITHIN 1-2 HOURS!
the only thing what works is the 2e recovery (auto boot into when it got stuck at sgs logo twice)
Have you tried pulling out the battery and then putting it back in, and then trying to get into recovery?
pull the battery out and insert then try to go download mode again if it doesn't work you have to use JIG for enter to download mode.
electrotune1200 said:
Have you tried pulling out the battery and then putting it back in, and then trying to get into recovery?
Click to expand...
Click to collapse
i've edited my post but i cant do anything in 2e recovery
trustsyzaa said:
pull the battery out and insert then try to go download mode again if it doesn't work you have to use JIG for enter to download mode.
Click to expand...
Click to collapse
JIG?
my phone got stuck at boot (or recovery) NOT MORE...
even my PC can't see that a phone is connected
can you install the earlier kernel through 2e recovery?
should i give my phone into repair?
is it warranty then ( i mean no custom thing is flashed)
trustsyzaa said:
can you install the earlier kernel through 2e recovery?
Click to expand...
Click to collapse
how to?
recovery only shows
reboot
flash update.zip
wipe data/factory reset
wipe cache patition
and i idiot pressed wipe data/factory reset
so it means i have to flash the custom rom again and then...?
PoTi_96 said:
Hey, i made a BIG MISTAKE...
PLEASE HELP WITHIN 1-2 HOURS!
__________________
If you like someones post pls press the "THANKS" button
AND PLEASE USE THE SEARCH BUTTON BEFORE ASKING
Click to expand...
Click to collapse
Maybe you should:
1) use a less useless thread subject, a sensible subjects gets you help faster
2) avoid caps and demanding a 1-2 hour solution (unprofessional)
3) respect what's said in the capital letter line in your own signature
4) don't panic! Since recovery mode is still working you should be able to save your phone.
If nothing works, a Jig might help you (see #3 in this posting). If even that doesn't help, you can still send it in for repair after all.
5) general hint: get 3 button combo mode working first before flashing, it's said all over the forums. As a noob, I respected that, got myself a JIG prior and was able to save my phone after a soft brick.
Landorin said:
Maybe you should:
1) use a less useless thread subject, a sensible subjects gets you help faster
2) avoid caps and demanding a 1-2 hour solution (unprofessional)
3) respect what's said in the capital letter line in your own signature
4) don't panic! If nothing works, a Jig might help you (see #3 in this posting). If even that doesn't help, you can still send it in for repair after all.
5) for everyone: get 3 button combo mode working FIRST before flashing, it's said all over the forums. As a noob, I respected that, got myself a JIG prior and was able to save my phone after a soft brick.
Click to expand...
Click to collapse
thanks
i know, but the problem is it's not actually my phone... it's a friends phone
and he wants it back in 2 hours
i told him now he should go to get it into repair and if it costs something i have to pay...
or should i try hamsterbread? it has a ROM and a Kernel in one update.zip?
so how do i get back to stock 2.1 ROM + stock Kernel then?
I am not very familiar with recovery mode (never had to use it to save my phone so far), but afaik you can still flash that way somehow.
Anyways: take your time to not make additional mistakes, if you can save the phone your friend will surely stay your friend, and try what people suggested or will suggest here (change subject title to gain more help faster).
As said, you can still send it in for repair after all but why not try something first with recovery mode? There's not much to lose now anyway.
Do not panic, take a deep breath, ignore the clock! Your friend would be more pissed if you had to send it in (which can take weeks or months)! I wouldn't see why you want to do that as long as either download or recovery mode is still operational. So go change the subject, remove the 1-2 hour demand sentence and I'm sure you will get help!
Btw a jig is some USB dongle or cable you can plug into the phone to activate download mode. Costs just a few euro. Available on ebay as well as self made: http://forum.xda-developers.com/showthread.php?t=819551
So can you get into download mode?
Preferably, you need a 3 file 2.1 stock firmware you can flash with Odin3 using a 512 pit and re-partition.
I have a 3 file stock 2.1 firmware for Australia if you want it. It will at least get you stable, then you can flash anything you want after that.
electrotune1200 said:
So can you get into download mode?
Preferably, you need a 3 file 2.1 stock firmware you can flash with Odin3 using a 512 pit and re-partition.
I have a 3 file stock 2.1 firmware for Australia if you want it. It will at least get you stable, then you can flash anything you want after that.
Click to expand...
Click to collapse
nope :/
ok i usually got it into clockwork recovery (dont ask me how :O )
and flashed the custem kernel and custom rom i was using before again.
now it got stuck at "ultimate kernel" logo -.-
THX 2 ALL FOR YOUR HELP
i love you guys
Just try this before you panic.
Pull the battery. Hold the power button for 10 seconds. Put the battery back in.
Hold the download mode sequence until it forces itself into download mode. Sometimes it can take a minute. Just keep holding it.
electrotune1200 said:
Just try this before you panic.
Pull the battery. Hold the power button for 10 seconds. Put the battery back in.
Hold the download mode sequence until it forces itself into download mode. Sometimes it can take a minute. Just keep holding it.
Click to expand...
Click to collapse
tried that 5 minutes long....
nothing happened... :/ damnit
nothing works... no 3 button thing, not download mode, no recovery, no bootup...
repair?
Order a jig from Ebay and try to get it express posted. Will be alot quicker than a repair center. Then you have one in case you get into trouble again.
electrotune1200 said:
Order a jig from Ebay and try to get it express posted. Will be alot quicker than a repair center. Then you have one in case you get into trouble again.
Click to expand...
Click to collapse
no... I'm not buying stuff for my friend...
i'll say him -> REPAIR
(how much will it cost?)
This was my last phone on anything custom, when it's not my phone damnit...
THX 4 YOUR HELP ANYWAYS
There's a strong chance they will send it right back un-repaired because there's a custom rom on it.
Remind me to never let you borrow my phone...
Sent from my GT-I9000 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=819551
Run to the shop en make a jig.
Related
hi all, I have my captivate stuck on the at&t logo, I cant get it to recovery mode. is there an "idiot" guide of how to flash it into recovery or back to the stock version?
thanks in advance!
Use odin to flash back to stock. Just search it. Will correct any mistakes you made.
Sent from my SAMSUNG-SGH-I897 using XDA App
What did you do to get it this way?
im stuck on the same thing i cant get into download mode though
becuse my phone ethier boots into the battery screen and doent stop boot again and again
or
it goes to the att screen and then turns off and goes to the screen again and again
i just update it to the ofical 2.2 and flashed backed using ondin3 one click to root the phone
how do u force the phone into download mode
ive tried all the butto combutions
Well,
axis01 said:
What did you do to get it this way?
Click to expand...
Click to collapse
I used clockwork mod and formatted all of the options including system and etc etc
UnBrickable mod is easier then 3 button fixes or jigs.. Simply remove the battery, replace the battery, plug into USB, then click the "Download Mode" button. After that, use a Heimdall One-Click to flash software. There's no fooling around with timing or trying to get the order correct, or anything... it just goes into download mode every time.
Just thought I'd put that in here. I like UBM, it's great.
I did the same, you found the solution?
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
charlie2610 said:
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
Click to expand...
Click to collapse
Did you find the solution, because i´m in the same problem but worst because my sgs2 doesn´t turn on anymore, please help
charlie2610 said:
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
Click to expand...
Click to collapse
You have a few options and these options are as much as we can help you here.
1) Keep trying the button combos. It just might work one of these times. If you ever get it into download mode then try to flash it back to stock immediately.
2) Buy a Jig. They are available for cheap and will probably help you out. They force your phone into download mode and will allow you to flash it then.
3) Do the unbrickable mod. This involves sending your phone off for a few days, spending some cash, and having it worked on. It will come back in working order and there are even ways to have the person who worked on it flash a custom rom for you.
These are your options. And honestly, more than telling you the above, I dont think there is much more help we can offer here.
EDIT: Holy hell I just realized this post is from April. I just wasted a few minutes typing all of that. Damn.
yea. Thread resserection
Sent from my Captivate using XDA App on Team Hacksung ICS
I'm really sorry, I searched for solutions but didnt found one that fits my problem.
I'm a total newbie and ****ed up my phone in many ways. I started trying to install something it wasnt suposed to work on my phone (rom destinated to 9000 and stuff). I have a Samsung Galaxy S GT-I9000b (sold to latin amarica) and came from factory with android 2.2.
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Before I try any further I'd like your advices as how to procede regarding my 9000b. Pulling the battery out, putting it in again and holding either vol down or both volumes and either pluging the phone on usb or pressing power allways gives me the same result, the screen with phone exclamation triangle and pc.
So, before I buy a jig cable on ebay that will probably take 3 weeks to get here (Brasil) is there anything else I can try?
Please help me, I'm desperate and I dont want to take it to assistence, it would cost me much money and ruin all my courage in trying to use Roms.
Thanks alot and sorry for the bad english.
so did you have the 3 button combination before this happened ??
have you tried to charge the phone whilst powered off, then when the phone gets hot, try download mode then ? sometimes this works, as heat can help download mode work.
another thing that has worked for SOME people, is leaving the battery out for 10mins, doing the 3 button combo, and whilst holding the 3 buttons, insert the battery.
you could try these and see what happens,
And 3 weeks delivery for the JIG is a long time, couldnt you make one in less that 3 weeks.
If you can't get into download mode, you are screwed until you get your hands on a jig, simple as that. Just wait. Patience is a virtue.
Thanks in advance for the quick reply guys, I ordered the jig, estimated 20 days, usualy it takes the same amount from the central postal ofice to my home since they allways restrict packages from hong kong. I'm considering making one but I'm a total denial in eletronics.
I was able to get to download mode before this problem yes. I would just hold down vol and center key and then power. Now even when I plug it in to charge I get the screen with the exclamation.
Any more sugestions?
no other suggestions other than whats listed above
looks like you will have to wait for the JIG to arrive.
Loner-phone here you come lol
Then I have a couple of questions.
1) Since I plut it in directly on the power and still recive the same screen is the phone still charging? Or once the battery is over I'm ****ed up twice?
2) Is there any chance that the jig wont work or I in some way ****ed up my I-9000b permanently?
3) After I make/get a jig how should I procede? I heard about one-click odin, but apears that its for another model of phone, and since I got on all this trouble exactly for trying to do things to my phone that were suposed to be only for another model, I'm kind of lost.
Inputs?
Thank you all for already awnsering my questions.
1) the system is corrupted so the charging indicator will be too - thus leading to Phone ! PC image - this is the only image the phone can now produce
2) The 'JIG' has a 100% success rate - providing that the motherboard is not fried - which it isnt as it still shows an image
3) the jig is just a modified USB, just plug it into the phone whilst powered off and download mode will appear, and then you just attach your genuine USB cable and flash stock ROM thru ODIN.
azzledazzle Thank you very much for your patience, but since I`m a total newbie to all this, some of your awnsers I didnt understood fully, do you care explain me better?
Regarding question 1) The power indicator is corrupted, ok. But this means if my battery die out of usage it wont charge again or just that the indicator wont show that is charging but the battery actualy is charging?
and for question 3) Is ther any tutorial directed to I-9000 on how to use odin to flash a stock ROM ? like baby steps? After all that I'm even afraid to turn the phone on, so I would like to know exactly what to do. I`m cosindering asking someone with technical skills to help me on a home made jig.
oh im sorry, i get carried away sometimes.
1) i assume the battery will be charging yes. only the phone will not be able to show this due to the corruption.
2) when you have made / bought a JIG (link below) you ideally want to flash a Stock ROM, you can get this from samfirmware (link below) and also on this site is a tutorial on how to use ODIN, its fairly easy if you just read the instructions provided.
JIG: http://forum.xda-developers.com/showthread.php?t=819551&page=3
Firmwares : www.samfirmware.com
ODIN download and guide : http://forum.xda-developers.com/showthread.php?t=846913
Its a miracle, somehow I managed to get into download mode. But I'm still a bit insecure
Here is the deal, I dowloaded a .tar file that alledgedly from my carrier and for my country. The tar is named JPA_JP3_JPA.
Inside the file there are cache.rfs factoryfs.rfs modem.bin param.lfs zimage
But what should I put where on ODIN if I only have PIT PDA PHONE and CSC?
And how can I discover if I should use pit 512 or 803?
Should I consider a master clear setting?
the file you downloaded is a full firmware compressed into 1 .tar file.
so in odin load the .tar file into PDA section and THATS IT !!
DO NOT USE PIT WITH THIS FILE.
press start and enjoy
PS do a factory reset after the flash
vongikking said:
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Click to expand...
Click to collapse
Hello all!
I've got my hands on a GT-I9000 today.
It's got 2.3.3 Android on it.
Wanting to install CM7, I was first of all trying to root it.
I'm on Mac OS X 10.6.8, thus I downloaded heimdall-frontend and the "Hardcore's SpeedMod kernel with ClockworkMod Recovery".
When I put my phone into DL Mode and connect it to my Mac, I can't write the image to it.
Heimdall is failing with "Failed to receive device info response!"
What do you ppl suggest me to do now?
Thanks,
F.
Try to flash with Windows!
Sent from hell to take your soul
Lunchbox115 said:
Try to flash with Windows!
Sent from hell to take your soul
Click to expand...
Click to collapse
Indeed I now managed to get Windows XP PC.
one trouble still remains: after rooting the device remains in an infinite reboot loop!!!
It only stops when WiFi is disabled.
Any help bout this?
Or at least any means to get back to a factory ROM?
I got 2.3.3 before flashing...
Thanks!
Try to flash the nightly again, should solve the bootloop-issue.
Or you can wipe cache/dalvik cache, this helped me too.
Lunchbox115 said:
Try to flash the nightly again, should solve the bootloop-issue.
Click to expand...
Click to collapse
Which nightly do you intend me to re-flash?
Or you can wipe cache/dalvik cache, this helped me too.
Click to expand...
Click to collapse
How do I achieve these two things?
Thanks,
F.
Just take the latest nightly. To wipe the cache/dalvik cache you have to boot into recovery (hold volume UP + home button + power button.
Sent from hell to take your soul
So I recently made a thread how adb wasn't working and that evolved into not being able to get into download mode. Now after not being able to get into download mode for days, I'm still stuck on cm7 with no way of getting back to stock. 3-button recovery won't work, the only way to get into recovery is adb reboot recovery. No button and cable methods work to get phone into download mode as well as adb reboot download. I even recently tried http://www.youtube.com/watch?v=lojU5bvGz3c which is a makeshift usb jig. I successfully made it but it would only turn the phone on. WTF. I'm afraid to buy a real usb jig from online because it most likely will cause the same thing. What is there to do? I'm completely lost. The phone works, the rom is okay I just cannot get back to stock and get rid of cm7. There are lots of issues I need to fix and cannot because of this. Any ideas?????
EDIT: Now I'm completely f'ed. I tried flashing cm7 instead of MIUI again to try once more if I would have better luck on just cm7, but during flash in cwm the phone turned off because the battery compartment was loose and now the phone boots up and goes into recovery shows some code then turns off again
(This post just in case anyone missed the reason in the edit)
Reason: EDIT: FIXED! Don't know what happened. Rearranged resistors and tried again and finally got it
Click to expand...
Click to collapse
I just went back to cm7/miui and it happened again. Nothing to get into download mode is working. What's wrong with cm7 on my phone?
mikel.canovas said:
I just went back to cm7/miui and it happened again. Nothing to get into download mode is working. What's wrong with cm7 on my phone?
Click to expand...
Click to collapse
What's your process to get CM7/Miui installed?
On a side note, ADB won't connect to your device unless you have the Nexus S drivers installed on you computer when CM7/Miui is installed
When I was last on cm7 adb reboot download doesn't work.
Drivers installed
Just sayin
Sent from my unbrickable cappy *bam*
yeah, i distinctly remember the first CM7 build threads that came up here saying that adb reboot download DOES NOT work, and you DO need working 3 buttons or a jig
not sure why that was removed from the threads
A jig should work
You might be coming into contact with the resistors (I can't watch that youtube video from work--firewalled--so I don't know what the setup looks like). Any contact with the them will make it not work. Try insulating them more with some heavy packing tape.
I cut up my mini-usb plug from my car charger (didn't need it), and peeled off all the plastic so I could easily touch the correct two pins with the jig when the hacked up mini-usb is plugged in. Works like a charm. Sometimes if you aren't touching them just right, or if one end of the pin is touching the wrong point the power will come on.
Try harder with the jig, I guarantee you it will work (and you shouldn't have to buy one--it's too easy to do yourself for less than $2 and about 5 minutes).
Good luck!
Just a thought. Are you installing GB boot loaders before flashing CM7/Miui? If so, the way to get into Recovery/Download mode changes. Recovery is vol+/power, Download is Vol-/power.
Just thought I'd toss that out there...just in case
kangi26 said:
Just a thought. Are you installing GB boot loaders before flashing CM7/Miui? If so, the way to get into Recovery/Download mode changes. Recovery is vol+/power, Download is Vol-/power.
Just thought I'd toss that out there...just in case
Click to expand...
Click to collapse
That is only for I9000 GB bootloaders.
On I897 GB bootloaders its still the same as eclair/froyo!
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
That is only for I9000 GB bootloaders.
On I897 GB bootloaders its still the same as eclair/froyo!
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Yeah, I know, but without all of the details. I figure it doesn't hurt to ask
Sent from a autonomous device
Thanks a ton for the info on GB i've been beating my head trying to get my Mesmerize flashed to a rooted EH09. The vol down button was teh trick i needed.
No download Mode after I897 GB Bootloaders on CM7
Hi there, i've got a question. If i can't get into download mode using the 3 button combination nor the Vol- + Power nor the connect+press buttons+insert baterry trick , do i have chance to get into download mode using the YIG? Thank you
I've lost the 3combo after installing the GB bootloaders with CM7 but the Odin Connection was lost on the SBL, The phone is not even Powering on anymore
If your phone has no signs of life at all, then sadly you are hard bricked...
But it can be fixed through jtag or the unbrickable mod.
So is there hope?
4-2ndtwin said:
If your phone has no signs of life at all, then sadly you are hard bricked...
But it can be fixed through jtag or the unbrickable mod.
Click to expand...
Click to collapse
So if i open the phone and do the unbrickable mod is there a chance to solve the problem? thank you in advance
Yes, according to those that have done jtag or the unbrickable mod, these methods are successful. To get better info though, I would recommend going to those specific threads.
4-2ndtwin said:
Yes, according to those that have done jtag or the unbrickable mod, these methods are successful. To get better info though, I would recommend going to those specific threads.
Click to expand...
Click to collapse
Thank you man i'm going to talk with Adam to see if i can solve the problem.
guilleglad said:
Hi there, i've got a question. If i can't get into download mode using the 3 button combination nor the Vol- + Power nor the connect+press buttons+insert baterry trick , do i have chance to get into download mode using the YIG? Thank you
I've lost the 3combo after installing the GB bootloaders with CM7 but the Odin Connection was lost on the SBL, The phone is not even Powering on anymore
Click to expand...
Click to collapse
I don't think you need jtag (but you can look into it). If your phone is able to at least power on, you should be able to use a Jig to get it into download mode. That is what I did with mine when all the options fail.
good luck.
0gravity1 said:
I don't think you need jtag (but you can look into it). If your phone is able to at least power on, you should be able to use a Jig to get it into download mode. That is what I did with mine when all the options fail.
good look.
Click to expand...
Click to collapse
If the phone doesn't show any signs of life (wich it wont if he failed on sbl) Jtag or Unbrickable Mod would be your 2 best bet. (Id use Unbrickable mode since it will protect you from future issues.)
Sorry haven't checked this thread in a while. My process for going to cm7/miui is flashing stock eclair through odin one click, then rooting and installing cwm. From there I just flash the latest nightly or whatever it is. Nothing I'm doing seems to be wrong
The problem is that I should be able to get into download mode without having to use a jig every single time. 3 button combo should work, but it doesn't when using cm7/miui for some reason
Hello,
I tried to flash back to the stock ROM of Galaxy S and then install a new Jetpack 8.2 custom ROM.
Apparently, since I did a bad search on the internet on finding a stock ROM and pit file, i downloaded a pack from xda with the .pit file pda file phone file and CSC file.
I DONT REMEMBER which it was..i selected all the files from the pack through odin and re-partitioning was ticked (i saw it after the flash finished).
So when the processes was completed waited a bit and since the phone was not responding i pulled it out.
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Is there anything i can do to fix it?
p.s: havent tried a usb jig but from searches i made on the internet and on xda forums ppl said it will prolly not work. are there any instruction on how to make one (link would be appriciated)?
Thanks in advance
Best option would be to try a Jig (you can buy one on ebay or dealextreme) and see if you can go into DL mode. Sometime the button combination for Download mode changes depending on the firmware. Try pressing the middle of the volume rocker and power at the same time.
If not wait for a Jib or build yourself one. There should be instruction in this forum on how to build one.
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
evanogrady said:
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
Click to expand...
Click to collapse
Worth a try. Just tell them it suddenly stopped working and you have no idea what's wrong. It's not like they can power it on and see that you failed flashing it or something. and even if they use a jig they can only get to download mode and reflash it...
even if they say no... a jig costs like $1.5 on eBay. search for "i9000 jig".
Insert if, press the power button and poof, you're in download mode,
the thing is that the phone is not under any warranty or something and the store i got it is far away now !!
JTAG service if you're in the UK: http://www.fonefunshop.co.uk/
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
As long as your bootloader is intact, the jig will get you to the download mode
Wrongly flashed i9000 with i897 rom has been confirmed to work with the jig, but i don't know i9000 with i9003 rom...
Or you can apply the unbrickable mod if your phone's warranty was voided already, if not, send it back to the shop.
immortalcy said:
Hello,
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Click to expand...
Click to collapse
Had that also yesterday putting a new ROM on my GS. The process of writing the PDA halted.. Black screen, no way to start it up en no screen indications of charging etc..
I removed it from my USB, Removed the battery a few times did the three way download mode trick several times and finally I got the download mode screen from where I successfully loaded the new ROM.
So try a few times.. even when you get a black screen !!
let me be clear once more..i downloaded a complete I9003 rom pack from xda... some guy posted..i just missed that it was I9003 and not I9000..
and on odin re-partition was clicked..but the process was completed successfully even thou after that the phone wont start or go into download mode :/
i used not only PDA and PIT files but 2 more was included as well :/ so what i am asking is if this could really have damaged the bootloader or not
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
dk206 said:
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try jig first.
Next try JTAG or UNBRICKABLE mod.
Then Try a service centre.
in case it wokes up.. anyone has links for stock rom and pit to flash with odin?
thanks again
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Taxiozaurus said:
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Click to expand...
Click to collapse
Any updates on this ? cause I'm also having the same issue!
Dan_Aykroyd said:
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
Click to expand...
Click to collapse
Are you 100% sure the JIG wont work if bricked with a black screen. Are there any other possibilities to unbrick the phone. I really need this phone back or my dad will kill me..
I have been searching for a solution, but haven't found any..
I flashed to kingdroid rom a while ago from stock GB with abyss kernel. Everything went fine, and later wanted to try a new rom.
So I wiped the data and factory reset in CWM and tried to restore the old stock GB. I don't know if anything went wrong in that process, but now I can't even turn on the phone? I can't boot up CWM either?
fruddy said:
I have been searching for a solution, but haven't found any..
I flashed to kingdroid rom a while ago from stock GB with abyss kernel. Everything went fine, and later wanted to try a new rom.
So I wiped the data and factory reset in CWM and tried to restore the old stock GB. I don't know if anything went wrong in that process, but now I can't even turn on the phone? I can't boot up CWM either?
Click to expand...
Click to collapse
Can you enter download mode??If so flash any GB rom.If the flash is getting stuck at factoryfs or somewhere for long than 15 mins..you have superbricked your phone by doing a wipe.Only way is to replace the mobo or trying this
yeah go on download mode. Use odin pc. It will raise the counter, but its much better than a brick note.. Hehe
Download mode is volume down, home key and turn on key right?
Doesnt work.. how long is I supposed to hold it in?
And what is a MOBO?
Easy ... Don't Panic
fruddy said:
I have been searching for a solution, but haven't found any..
I flashed to kingdroid rom a while ago from stock GB with abyss kernel. Everything went fine, and later wanted to try a new rom.
So I wiped the data and factory reset in CWM and tried to restore the old stock GB. I don't know if anything went wrong in that process, but now I can't even turn on the phone? I can't boot up CWM either?
Click to expand...
Click to collapse
The First Thing you did was right, since you did the wipe using the AbyssKernel kernel, witch was safe and away from the HardBrick Thing around the Stock ICS Kernel.
But what you did wrong, is that you did wipe and restore using the Kernel inside the rom you used, wich of course was in cause !!!! so Here is what you will do, just Follow the Steps in My following Post, and you are done
http://forum.xda-developers.com/showpost.php?p=26772618&postcount=12
IF this Helped, Then you Know what to do
Glad to hear kimifender!
Sorry for not being that bright in all this.. But how can I do all the instructions when I can't turn the phone on? I can't find the sdcards on my computer either when i connect the phone to the computer
Sounds like you have a big paperweight. You need to somehow get it to a Samsung repair center to get the motherboard replaced. There's a thread in the General section that MIGHT help revive it, but no guarantees.
Always make sure you read, read, read before you flash anything. Like other people said, the restore is what bricked it.
kimifender said:
The First Thing you did was right, since you did the wipe using the AbyssKernel kernel, witch was safe and away from the HardBrick Thing around the Stock ICS Kernel.
But what you did wrong, is that you did wipe and restore using the Kernel inside the rom you used, wich of course was in cause !!!! so Here is what you will do, just Follow the Steps in My following Post, and you are done
http://forum.xda-developers.com/showpost.php?p=26772618&postcount=12
IF this Helped, Then you Know what to do
Click to expand...
Click to collapse
He said he wiped after beeing on the other rom. So he wiped with an unsafe kernel.
=> Superbrick.
So there is no way I can revive my phone?
Maybe im just not turning it on the right way?
fruddy said:
So there is no way I can revive my phone?
Maybe im just not turning it on the right way?
Click to expand...
Click to collapse
If you're pushing the power button, you are turning it on. If you are holding down volume up/down + power + home button you are trying to put it in download/recovery.
Sorry, but it sounds like it is a paperweight/brick.
fruddy said:
So there is no way I can revive my phone?
Maybe im just not turning it on the right way?
Click to expand...
Click to collapse
Check battery. make sure it still has power. Pull out and leave out 5 minutes and replace it back as well.
Then turn it on and try to enter download mode (Home volume-down and power) and connect it to PC odin (even in case the screen does not turn on) and see the yellow box is there. If there is, you can flash kernel that has CWM as well, and there is hope to revive it.
If you cannot get odin to see it, then SS service is the only way.
fruddy said:
So there is no way I can revive my phone?
Maybe im just not turning it on the right way?
Click to expand...
Click to collapse
Well Of course, If your phone is not ON, it won't show any usb storage on the PC.
Don't Give up Yet !!!
Are you sure your phone has enough battery charge,
Not Sure? well Do this :
- Keep your phone under AC Battery Charger (no USB charging) for at least 45 min.
- Take Off the Battery for at least 10s seconde,
put it back, Then try to to enter to download mode directly : Vol down + Power + Home Button at the same time untill you see the Yellow Dowload Logo, Don't Try to turn your phone on by Pressing the power Button as Normally, It Simply won't turn on !!
Keep taking the Battery Off and Back untill it works, believe me this happened before.
How much would it cost to get it fixed?
How much would a new motherboard cost?
fruddy said:
How much would it cost to get it fixed?
How much would a new motherboard cost?
Click to expand...
Click to collapse
Try My Post First untill it works, Believe it or not !!!!!
I really doubt that will work if he has a superbrick. If it does it would be amazing.
But how can i flash, when I can't even turn on the phone?
fruddy said:
But how can i flash, when I can't even turn on the phone?
Click to expand...
Click to collapse
Try what I told you in Post N°12,
If you get the chance to get into the download mode : then Follow My Post N°5.
You Have to Make sure your phone is really Dead, or just need a push to wake up again.
I swear this happened to me before, and believe me I'm no noob.
Just Try First. If it doesn't work, then Buy another one ;;;;
how i fixed it
Iám new as a member here but not new on reading here on this forum.
Want to post fast how i brickt my phone with ics and kernel problems and wipe going wrong.
Cwm still working but nothing is going anymore.
In cwm flash a franco kernel (i used Franco kernel 10 because had it on my sd card) then reboot into recovery and flash the Abys kernel.
Reboot into recovery and install your rom or restore an backup you made.
I hope sthis works for all.
annoniem said:
Iám new as a member here but not new on reading here on this forum.
Want to post fast how i brickt my phone with ics and kernel problems and wipe going wrong.
Cwm still working but nothing is going anymore.
In cwm flash a franco kernel (i used Franco kernel 10 because had it on my sd card) then reboot into recovery and flash the Abys kernel.
Reboot into recovery and install your rom or restore an backup you made.
I hope sthis works for all.
Click to expand...
Click to collapse
Reaaaaaaad,
He can not wake his phone up, or turn it on !!!
So How would he install any Franco or what ever ...... !!!!!!!!
bricked Note
kimifender said:
Reaaaaaaad,
He can not wake his phone up, or turn it on !!!
So How would he install any Franco or what ever ...... !!!!!!!!
Click to expand...
Click to collapse
You tell him lol, i love how he wrote "Im new as a member here but not new on reading here on this forum"