Database Develop

USB NOT WORKING

OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !

Reset, enter bootloader, reflash

how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?

DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...

i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?

DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader

just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C

HTC Hero (Sprint) CDMA - Help need! No power

Hello dear all,
Yesterday i installed CyanogenMod 7.2 on my HTC Hero (Sprint) CDMA. - It was awesome and worked great!
and today, i wanted to update my radio. I just found it from my folder. (It was downloaded some days ago)
I copied the file (update-hero-radio-63.18.55.06JU_6.35.09.26-signed) to SD card root and reboted my phone with recovery.
Installed from sd card and it just stucked while updating radio.
So i waited so long and nothing happens.
Then i put my battery out and inserted it.
Tried to power on the device but NO POWER ON. Even no power on LED when it connected to charger.
I just want to mention that IT WONT WORK IF I PRESS (VOL DOWN + POWER/ HOME + POWER/ MENU + POWER/ VOL DOWN + GREEN + POWER )
When i press Power button + VOL UP, it vibrates 3 times
What can i do to get my phone back to normal?
Please help me.
Thank you.
Kasun Jayarathna

truekasun said:
Hello dear all,
Yesterday i installed CyanogenMod 7.2 on my HTC Hero (Sprint) CDMA. - It was awesome and worked great!
and today, i wanted to update my radio. I just found it from my folder. (It was downloaded some days ago)
I copied the file (update-hero-radio-63.18.55.06JU_6.35.09.26-signed) to SD card root and reboted my phone with recovery.
Installed from sd card and it just stucked while updating radio.
So i waited so long and nothing happens.
Then i put my battery out and inserted it.
Tried to power on the device but NO POWER ON. Even no power on LED when it connected to charger.
When i press Power button + VOL UP, it vibrates 3 times
What can i do to get my phone back to normal?
Please help me.
Thank you.
Kasun Jayarathna
Click to expand...
Click to collapse
Hold volume button down and then press power button. This should load fastboot and allow you to either install stock image if loaded on sdcard or get into recovery menu.
Hope this helps.

jamstewonline said:
Hold volume button down and then press power button. This should load fastboot and allow you to either install stock image if loaded on sdcard or get into recovery menu.
Hope this helps.
Click to expand...
Click to collapse
No buddy, FAST BOOT or HBOOT doesn't start.. even no vibration or power up.

truekasun said:
Hello dear all,
Yesterday i installed CyanogenMod 7.2 on my HTC Hero (Sprint) CDMA. - It was awesome and worked great!
and today, i wanted to update my radio. I just found it from my folder. (It was downloaded some days ago)
I copied the file (update-hero-radio-63.18.55.06JU_6.35.09.26-signed) to SD card root and reboted my phone with recovery.
Installed from sd card and it just stucked while updating radio.
So i waited so long and nothing happens.
Then i put my battery out and inserted it.
Tried to power on the device but NO POWER ON. Even no power on LED when it connected to charger.
I just want to mention that IT WONT WORK IF I PRESS (VOL DOWN + POWER/ HOME + POWER/ MENU + POWER/ VOL DOWN + GREEN + POWER )
When i press Power button + VOL UP, it vibrates 3 times
What can i do to get my phone back to normal?
Please help me.
Thank you.
Kasun Jayarathna
Click to expand...
Click to collapse
Looks like you flashed a "hero," not a "heroc" radio? They always say the only way to really brick your hero is to mess up flashing a radio :/
Sent from my SCH-I535 using xda app-developers app

ajrty33 said:
Looks like you flashed a "hero," not a "heroc" radio? They always say the only way to really brick your hero is to mess up flashing a radio :/
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Is there any way to re-flash this?

Unfortunately not, without hand flashing equipment and a bit of engineering knowledge your phone is a brick. There is no way to recover it.
Sent from my cm_tenderloin using xda app-developers app

Shelnutt2 said:
Unfortunately not, without hand flashing equipment and a bit of engineering knowledge your phone is a brick. There is no way to recover it.
Sent from my cm_tenderloin using xda app-developers app
Click to expand...
Click to collapse
What do i need to fix this?
Let me know about it please.
Thank you.

[Q] samsung galaxy ace didnt automatically reboot after installing rom..

hi guys.. pls help me with my problem..
my samsung galaxy ace is now powerless, i cant turn the power on,, and i cant even charged it..
this is what happen. im on installation of roms for my unit, before all the instructions are done i thick its now totally brick..
after installing the rom it says installation conpleted but it didnt automatically reboot after that so i manual select reboot as i read in instruction but what i what wonder is it didnt automatically reboot.. after i manual reboot the unit it turns powerless and black out instead it will automatically boot but didnt.
now even i turn on the power button it didnt work, i push the home+power botton at the same but also didnt work, ive read some instructions on google on how to unbrick .. i push volume + and volume - at the same time then push power button but still it didnt turn on..
pls.. anybody can help me to fix my unit.. plsssss
tnx in advance for those who are going to help me..

excile25 said:
hi guys.. pls help me with my problem..
my samsung galaxy ace is now powerless, i cant turn the power on,, and i cant even charged it..
this is what happen. im on installation of roms for my unit, before all the instructions are done i thick its now totally brick..
after installing the rom it says installation conpleted but it didnt automatically reboot after that so i manual select reboot as i read in instruction but what i what wonder is it didnt automatically reboot.. after i manual reboot the unit it turns powerless and black out instead it will automatically boot but didnt.
now even i turn on the power button it didnt work, i push the home+power botton at the same but also didnt work, ive read some instructions on google on how to unbrick .. i push volume + and volume - at the same time then push power button but still it didnt turn on..
pls.. anybody can help me to fix my unit.. plsssss
tnx in advance for those who are going to help me..
Click to expand...
Click to collapse
Download mode can be accessed by holding Volume Down and Home and Power buttons together.
If nothing happens and you're sure that your battery has some remaining charge, then there's a good chance it is hard bricked.
You could also try a USB Jig (ebay is your friend) and see if that helps but otherwise it's off to the Samsung Service Center for you.

excile25 said:
hi guys.. pls help me with my problem..
my samsung galaxy ace is now powerless, i cant turn the power on,, and i cant even charged it..
this is what happen. im on installation of roms for my unit, before all the instructions are done i thick its now totally brick..
after installing the rom it says installation conpleted but it didnt automatically reboot after that so i manual select reboot as i read in instruction but what i what wonder is it didnt automatically reboot.. after i manual reboot the unit it turns powerless and black out instead it will automatically boot but didnt.
now even i turn on the power button it didnt work, i push the home+power botton at the same but also didnt work, ive read some instructions on google on how to unbrick .. i push volume + and volume - at the same time then push power button but still it didnt turn on..
pls.. anybody can help me to fix my unit.. plsssss
tnx in advance for those who are going to help me..
Click to expand...
Click to collapse
try to go in download mode by pressing vol down plus home plus power button simultaneously. if it goes in download mode then flash original firmware of your phone and restore it
and if it doesn't go in download mode then there is nothing much we can do,,,, you have to take it to service center
Sent from my fastest galaxy fit using xda premium app

[Q] I think I bricked my phone :( :( - PLEASE help!

Hi,
I tried the regular fastboot method to load CWM recovery.
Whenever it got to the point of loading the recovering, it would just say "flashing recovery on the device...".
Then, when restarting bootloader and clicking on "recovery", it would just shut down the phone.
I decided to experiment to try fix the issue, and I came across this post:
http://forum.xda-developers.com/showthread.php?t=1928551
I downloaded the ZIP file and I ran the root.bat
It flashed some boot images and now my phone wont start
It is stuck on the "warning bootloader unlocked screen" and will not go any further.
Please help . I'm so scared that I've bricked my phone. Is there ANYTHING I can do?
Thanks in advance for the help!

The methods u used can't brick your phone
Reboot in boot loader by pressing the power button and volume - button at the same time. Just at the moment the phone shuts-down/reboot release the power button. It will boot in boot loader. After this flash cwm or twrp again and with the volume down button go to recovery. Select recovery with the volume up key and u are done. Cwm/twrp is flashed and will boot in the recovery.
In recovery I would install the ROM from Omar. It will restore your system and boot.IMG so it will work. Don't forget to wipe data.
If this doesn't work flash the home made fast boot files somewhere in the development section
Sent from my XT890 using xda app-developers app

Hazou said:
The methods u used can't brick your phone
Reboot in boot loader by pressing the power button and volume - button at the same time. Just at the moment the phone shuts-down/reboot release the power button. It will boot in boot loader.
Click to expand...
Click to collapse
Thanks - I tried that. I do let go of the buttons as soon as it starts to reboot itself, but it doesn't start the bootloader - it still just shows the screen "warning bootloader unlocked". I can not get back into the bootloader

Do u reset the phone with the 4 buttons and just when it resets does your phone reboots immediately?
Sent from my GT-P5110 using XDA Premium HD app

Hazou said:
Do u reset the phone with the 4 buttons and just when it resets does your phone reboots immediately?
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
If I hold all 4 buttons, the screen goes blank, and the green light stays on. My PC then finds hardware called "MEDFIELD" but wont find drivers for it.
Does this help at all?

alkit said:
If I hold all 4 buttons, the screen goes blank, and the green light stays on. My PC then finds hardware called "MEDFIELD" but wont find drivers for it.
Does this help at all?
Click to expand...
Click to collapse
The above applies when connected with usb.
If I press all 4 buttons without USB connected, it just reboots and gets stuck on the "unlocked bootloader" message again

alkit said:
Then, when restarting bootloader and clicking on "recovery", it would just shut down the phone.
Click to expand...
Click to collapse
Just of curiosity - which button you used to select recovery - power button or vol.up button?
alkit said:
I do let go of the buttons as soon as it starts to reboot itself, but it doesn't start the bootloader
Click to expand...
Click to collapse
You should let go only of power button and hold vol.down button (at least for me)
If your PC finds hardware - can you do fastboot devices to check whether it is actually recognized properly?
And last thing - which method you used to load recovery (and were you on ICS\JB)? You were rooted and used automated methods or you unlocked bootloader and wanted to root afterwards (manually through fastboot)?

Divina Angelus said:
Just of curiosity - which button you used to select recovery - power button or vol.up button?
You should let go only of power button and hold vol.down button (at least for me)
If your PC finds hardware - can you do fastboot devices to check whether it is actually recognized properly?
And last thing - which method you used to load recovery (and were you on ICS\JB)? You were rooted and used automated methods or you unlocked bootloader and wanted to root afterwards (manually through fastboot)?
Click to expand...
Click to collapse
You are a GENIUS!!! A LIFE SAVER!!! I can't begin to tell you how grateful I am. BOTH of your points fixed the phone.
I could never get into recovery becuase I was pressing the power button. I could never get into fastboot becuase I was holding both the power and volume down button.
So, for anyone using a RAZR I... please note the following SIMPLE things:
1) In the bootloader menu, the power button does NOT select the option. The VOL UP button selects the option
2) To boot into BOOTLOADER : Hold both power and vol down buttons until the phone restarts, and then RELEASE the power button, while still HOLDING the volume down button! It will then load the bootloader.
Again, THANKS so so much for reviving my phone for me. I was going crazy without a phone!

alkit said:
You are a GENIUS!!! A LIFE SAVER!!! I can't begin to tell you how grateful I am. BOTH of your points fixed the phone.
I could never get into recovery becuase I was pressing the power button. I could never get into fastboot becuase I was holding both the power and volume down button.
So, for anyone using a RAZR I... please note the following SIMPLE things:
1) In the fastboot menu, the power button does NOT select the option. The VOL UP button selects the option
2) To boot into BOOTLOADER : Hold both power and vol down buttons until the phone restarts, and then RELEASE the power button, while still holding the volume down button! It will then load the bootloader.
Again, THANKS so so much for reviving my phone for me. I was going crazy without a phone!
Click to expand...
Click to collapse
I was going through everything you've faced yesterday. So yeah, glad I was of help to someone else as well)

This has never happened to me before but don't stress one bit because nothing ever permanently bad comes from this. You can forget about it being destroyed. These aren't iPhones, haha. You can get it going again pretty easy I hear. Just don't stress because there is no point and you WILL get help. Just listen to what these experienced dudes are saying and you should be back on track. Good luck!
- - - - - - - - - -
UPDATE: Nice! Glad to see you got the help you needed and everything's back on track!

Nice that it is solved. I gave u the solution on my first post, but nice that someone els did a better job in explaining it
There is almost no possibilities to brick your device if u only flash things like the boot, system, recovery or data partition. They can he solved very easy. If u flash the other partitions like the radio u can get a problem.
Sent from my XT890 using xda app-developers app

Hazou said:
Nice that it is solved. I gave u the solution on my first post, but nice that someone els did a better job in explaining it
There is almost no possibilities to brick your device if u only flash things like the boot, system, recovery or data partition. They can he solved very easy. If u flash the other partitions like the radio u can get a problem.
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
You are 100% right. I just re-read your post, and noticed that you did mention those 2 points. I must've just read over them really quickly and didn't pay attention to the details of which buttons to press. :angel:
Thanks a ton for your help! Really appreciate it! :highfive:

I need help with my Xperia TL (SOLVED)

so the other day i decided to root my phone it went all well i also installed CWM it also worked. so i also decided to install a custom rom i cant remember the rom since it was download to my phones memory. either way i delete everything cache dalvek etc.. after it installed through recovery menu it said it needed a reboot so i did, but when i rebooted it came to the sony logo. since then its been stuck in the sony logo until it runs out of battery i can't access anything it wont go pass that not even the recovery menu. i don't know what to do. ALSO MY COMPUTER WILL NOT DETECT WHEN I PLUG MY PHONE IN SO I CAN'T USE PCC, Flash tool or seus... any help?

killmehere said:
so the other day i decided to root my phone it went all well i also installed CWM it also worked. so i also decided to install a custom rom i cant remember the rom since it was download to my phones memory. either way i delete everything cache dalvek etc.. after it installed through recovery menu it said it needed a reboot so i did, but when i rebooted it came to the sony logo. since then its been stuck in the sony logo until it runs out of battery i can't access anything it wont go pass that not even the recovery menu. i don't know what to do. ALSO MY COMPUTER WILL NOT DETECT WHEN I PLUG MY PHONE IN SO I CAN'T USE PCC, Flash tool or seus... any help?
Click to expand...
Click to collapse
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "

Have you tried flash mode
Sent from my One X using XDA Premium 4 mobile app

it doesnt connect to the pc i cant do anything.
FaiselW said:
Have you tried flash mode
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse

i let it charge for a little and tried the volume up plus power buttom it vibrated but boot it back to sony screen.
Alex5699 said:
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Click to expand...
Click to collapse

killmehere said:
it doesnt vibrate when it turns on. also tried what you said but didnt work. THIS CASE IS RARE AND MAYBE CAN HAVE A SOLUTION. JUST NEED TO DIG IN.
Click to expand...
Click to collapse
I think what should be focused on first is getting juice back in that battery. Plug it in to the charger and let it sit for a few hours (like, at least 8 hours). It may boot loop but maybe it will still get some juice? (not sure about this..). Then you can try again to get into Flashmode. (Are you experienced in flashing stock FTF's with flashtool?)

no... i let it charge for a little and tried the volume up plus power buttom it vibrated but boot it back to sony screen.
LaZiODROID said:
I think what should be focused on first is getting juice back in that battery. Plug it in to the charger and let it sit for a few hours (like, at least 8 hours). It may boot loop but maybe it will still get some juice? (not sure about this..). Then you can try again to get into Flashmode. (Are you experienced in flashing stock FTF's with flashtool?)
Click to expand...
Click to collapse

By turning it on with VolUp+Power, what were you expecting to happen?

i am not sure. when i tried connecting it. it connects for 5 secs then disconnects.
LaZiODROID said:
By turning it on with VolUp+Power, what were you expecting to happen?
Click to expand...
Click to collapse

Alex5699 said:
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Click to expand...
Click to collapse
AT FIRST IT didn't work now it did thanks. how do i put it as solved?

killmehere said:
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
Click to expand...
Click to collapse
Go to the original post in this thread and click the Edit Post button. Then near the Save button should be a "Go Advanced" button. You can edit the thread title in there. Glad to hear it worked out for you.

killmehere said:
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
Click to expand...
Click to collapse
sure, the very first post u made with your initial question, When you press edit, press on "go advanced and then u can change it up from there :good: