[Q] samsung galaxy ace didnt automatically reboot after installing rom.. - Galaxy Ace S5830 Q&A, Help & Troubleshooting

hi guys.. pls help me with my problem..
my samsung galaxy ace is now powerless, i cant turn the power on,, and i cant even charged it..
this is what happen. im on installation of roms for my unit, before all the instructions are done i thick its now totally brick..
after installing the rom it says installation conpleted but it didnt automatically reboot after that so i manual select reboot as i read in instruction but what i what wonder is it didnt automatically reboot.. after i manual reboot the unit it turns powerless and black out instead it will automatically boot but didnt.
now even i turn on the power button it didnt work, i push the home+power botton at the same but also didnt work, ive read some instructions on google on how to unbrick .. i push volume + and volume - at the same time then push power button but still it didnt turn on..
pls.. anybody can help me to fix my unit.. plsssss
tnx in advance for those who are going to help me..

excile25 said:
hi guys.. pls help me with my problem..
my samsung galaxy ace is now powerless, i cant turn the power on,, and i cant even charged it..
this is what happen. im on installation of roms for my unit, before all the instructions are done i thick its now totally brick..
after installing the rom it says installation conpleted but it didnt automatically reboot after that so i manual select reboot as i read in instruction but what i what wonder is it didnt automatically reboot.. after i manual reboot the unit it turns powerless and black out instead it will automatically boot but didnt.
now even i turn on the power button it didnt work, i push the home+power botton at the same but also didnt work, ive read some instructions on google on how to unbrick .. i push volume + and volume - at the same time then push power button but still it didnt turn on..
pls.. anybody can help me to fix my unit.. plsssss
tnx in advance for those who are going to help me..
Click to expand...
Click to collapse
Download mode can be accessed by holding Volume Down and Home and Power buttons together.
If nothing happens and you're sure that your battery has some remaining charge, then there's a good chance it is hard bricked.
You could also try a USB Jig (ebay is your friend) and see if that helps but otherwise it's off to the Samsung Service Center for you.

excile25 said:
hi guys.. pls help me with my problem..
my samsung galaxy ace is now powerless, i cant turn the power on,, and i cant even charged it..
this is what happen. im on installation of roms for my unit, before all the instructions are done i thick its now totally brick..
after installing the rom it says installation conpleted but it didnt automatically reboot after that so i manual select reboot as i read in instruction but what i what wonder is it didnt automatically reboot.. after i manual reboot the unit it turns powerless and black out instead it will automatically boot but didnt.
now even i turn on the power button it didnt work, i push the home+power botton at the same but also didnt work, ive read some instructions on google on how to unbrick .. i push volume + and volume - at the same time then push power button but still it didnt turn on..
pls.. anybody can help me to fix my unit.. plsssss
tnx in advance for those who are going to help me..
Click to expand...
Click to collapse
try to go in download mode by pressing vol down plus home plus power button simultaneously. if it goes in download mode then flash original firmware of your phone and restore it
and if it doesn't go in download mode then there is nothing much we can do,,,, you have to take it to service center
Sent from my fastest galaxy fit using xda premium app

Related

My diamond is dead

I tried to unlock my diamond, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ppcgeeks.com/Diamond/Users/Tob...20Unlocker.rar[/url]
Yep, just did the same.. Got an error that it was the wrong model id at the end. Now i cant enter bootloader, its a brick.
http://forum.ppcgeeks.com/showthread.php?t=36062
Have you tried going back into bootloader via the power button and volume down?
I have the same problem.
Did you solve it or not?
If you did what did you done?
you can not solve this problem my friend becouse i made the same thing and the phone is dead....I just found some litle informations in my searches and it can be done only by jtag mode
so if u are an expert and if u have a programmer u maybe can do this.....
here is the link : http://forum.revskills.de/viewtopic.php?f=25&t=117[/URL]
Maybe Ill can Help
Once i stuck in the boot of my phone in a rom everytime i turned it on ? oO but i solved the problem (after 2 ****in weekz without phone)
But this is what i Did
Ill simply pressed this at same time(Vol down, reset button & back arrow)
and deleted the which deleted the old OS backup (your phone still works)
and then i turned it off and pressed the same combo again
which will turn your phone in USB mode then put it into ur PC u maybe wont see it but that doesnt matter the same happened 2 me just go 2 HTC website from ur country and download the latest ROM update they got and let it load into and when ur done just reset ur phone and everything should be OK u can just load a new custom rom (Note u need HardSPL Installed i do not think u can do without ) just PM me if u need more help
blackster said:
Once i stuck in the boot of my phone in a rom everytime i turned it on ? oO but i solved the problem (after 2 ****in weekz without phone)
But this is what i Did
Ill simply pressed this at same time(Vol down, reset button & back arrow)
and deleted the which deleted the old OS backup (your phone still works)
and then i turned it off and pressed the same combo again
which will turn your phone in USB mode then put it into ur PC u maybe wont see it but that doesnt matter the same happened 2 me just go 2 HTC website from ur country and download the latest ROM update they got and let it load into and when ur done just reset ur phone and everything should be OK u can just load a new custom rom (Note u need HardSPL Installed i do not think u can do without ) just PM me if u need more help
Click to expand...
Click to collapse
I tried this with mine and it did nothing. Anyone else have any ideas?
thanks.
EDIT: I got mine working by pressing Power + Vol Dwn + Enter (circle button) + reset and hold them till the screen turns white. then follow the steps on the screen.

[Q] Accidentaly off during downloading firmware upgrade

How to solve? My SGS I9000 accidentaly off during downloading firmware upgrade. Now, when I switch on the phone, no Samsung and Galaxy S logo appeared, but the connected phone-pc icon appeared with warning icon in the middle. What can I do?
You have semi bricked it. you need to put it back in to download mode (vol down + home key + power button) press all 3 buttons at once. When in download mode reflash it again with Odin. If your 3 button doesn't work then you need a jig
Thanks for the reply.
Yeah.. 3 buttons doesn't work. I don't have any JIG right now. Maybe the best is go to Samsung Service Centre. Huu..
Plenty of jigs available on ebay or see the thread on here about making one
Anyone can verify this solution, is it work? Mine can't:
SOFT BRICK
Resolution
First off DO NOT PANIC. there is a simple solution, just remove the battery , plug the phone into the computer, press and hold volume down and it will enter download mode.
Click to expand...
Click to collapse
Source: forum.androidcentral.com/u-s-cellular-mesmerize/64681-how-full-system-wipe-restore-samsung-mesmerize.html
night_reader said:
Anyone can verify this solution, is it work? Mine can't:
Source: forum.androidcentral.com/u-s-cellular-mesmerize/64681-how-full-system-wipe-restore-samsung-mesmerize.html
Click to expand...
Click to collapse
You can't because it doesn't work that way. If you have a semi brick or brick (without the combo) you need a JIG/JTAG.
Other tricks like "heat the battery" "heat the Cellphone" or the one you pointed are just fake.

Stock in recovery mode! Please HELP!!

Hi guys. I just installed the value pack to 2.3.6 and was working fine but i got into recovery mode and cant get out of it. Home button just doesnt work. I've tryied to pull baterry of for 30min and put it back, hold all combo of buttons but the phone always goes to recovery mode and there a can go to reboot phone option but cant hit OK through Home button.... What could i do to solve this????
Please anyone??
I tryed also the adb reboot but the pc doesnt identify the phone while in recovery.
Thankx in advance.
Try menu button some recovery version us it or power button
Sent from my GT-I9001 using xda app-developers app
kalitza said:
there a can go to reboot phone option but cant hit OK through Home button.... What could i do to solve this????
Please anyone??
I tryed also the adb reboot but the pc doesnt identify the phone while in recovery.
Thankx in advance.
Click to expand...
Click to collapse
select with volume button and use power button to activate and check out Quick Fixes and Solutions (link below) for other options
xsenman said:
select with volume button and use power button to activate and check out Quick Fixes and Solutions (link below) for other options
Click to expand...
Click to collapse
Thankx both but power button doesnt do anything, tryed already. The menu button only make the options desapear and make them appear, so i'm stuck...
Any other advice?
Thankx
kalitza said:
Hi guys. I just installed the value pack to 2.3.6 and was working fine but i got into recovery mode and cant get out of it. Home button just doesnt work. I've tryied to pull baterry of for 30min and put it back, hold all combo of buttons but the phone always goes to recovery mode and there a can go to reboot phone option but cant hit OK through Home button.... What could i do to solve this????
Please anyone??
I tryed also the adb reboot but the pc doesnt identify the phone while in recovery.
Thankx in advance.
Click to expand...
Click to collapse
you have i9001 ?
Laurentyu1995 said:
you have i9001 ?
Click to expand...
Click to collapse
No. i9000
I've found that sometimes going to "advanced-->reboot recovery" and then "reboot phone" sometimes fixes this. Everything seems pretty hit-and-miss though, you sometimes just need to mess around and flash the hell out of it.

[Q] Power reset or unknown upload mode after flashing CM10

Hello guys!
While flashing to CM10 from CM9, my phone rebooted and stopped into screen "Power Reset or Unknown upload mode", no keys are pressed while booting. Any ideas how to fix this? I discharged battery completely and put it again but still this screen shows up.
any idea?
try to enter download mode it seems that kernel is broken
Sent from my GT-I9001 using xda premium
Enter download mode, and then using odin just install any custom firmware or a stock firmware !
Hope it helps ! :fingers-crossed:
i've tried home + vol down+ power button
only logo of Samsung showed up, after that annoying message "Power reset......"
any idea?
Are you able to boot into CWM? if yes, ask someone if he can take your sd card and download a CWMflashable zip to it. The plug it into your own phone and flash... :fingers are crossed for you:
------------------------------
working on:
SuperRom64 (2.3.6)
Project Stock (4.0.4)
whatever i'd press, all the time i see samsung logo and after 30 secs an error message.
1. Switch off your mobile.
2. Now, press and hold the volume up key and the power button. Leave both buttons when you see the SAMSUNG logo.
3. After "Galaxy S" splash screen you will get a white box and android logo image like below,then press menu soft key and wait some second.
4. If you boot into recovery, then wipe everything and then flash the ROM.
And it seems that you have managed to brick your mobile ! But try this I hope it solves your problem.
Doesnt work ;/ will try with jig
HAve the same problem
baju said:
Doesnt work ;/ will try with jig
Click to expand...
Click to collapse
Hello Well I got the same message when trying to install a rom to my i9003 and after trying many times i was able to get to CWM by presing the volume up + power and menu, thank god I always have a back up Rom in the SD so i was able to reinstall evrything... hope this works for you..

Stuck on bootloop

Hey guys, I flashed a .tar file from here: http://theunlockr.com/2012/11/22/how-to-install-clockworkmod-recovery-on-the-samsung-galaxy-s-i9000/
Via odin and now my device is turning on, shows the galaxy logo and then shuts down and turn on again.
I should probably mention that my home button doesn't work so I can't get into download mode to fix this.
I ordered a JIG usb from eBay, should get it any day now, but until then...
What should I do?
if your home button doesnt work how did you use odin to begin with or did it stop working after your flash if it stopped working after your flash just pop out your battery for a minute put it back in and try three button combo again also
http://www.youtube.com/user/puggereduk?feature=watch
TIGER 123 said:
if your home button doesnt work how did you use odin to begin with or did it stop working after your flash if it stopped working after your flash just pop out your battery for a minute put it back in and try three button combo again also
http://www.youtube.com/user/puggereduk?feature=watch
Click to expand...
Click to collapse
but I just said that my home button doesn't work, how will the 3 button combo help me?
while its looping
try to hold volume down and power together, should get you to recovery, from there you can go on.
did it before, hope will work for you too.
Bullmans said:
try to hold volume down and power together, should get you to recovery, from there you can go on.
did it before, hope will work for you too.
Click to expand...
Click to collapse
Nothing
Anyone?
.
since u flashed with that .tar file ....I thik u lost ur recovery also.....
in case if u still have any recovery access... just do a data wipe........helps to get rid of bootloops after flashin....

Categories

Resources