Related
Any workarounds for a voip app and microphone for a rooted book color?
the cool guys that know what they are doing are working on bluetooth, that seems to be the best bet to getting a microphone working with NC, cross your fingers!
what about a wired headset with a built in mic. does the nook have the connections to support this?
I think the two best options right now for voice applications are probably the Bluetooth and the slight possibility that the micro-USB port on the Nook seems to have quite a few extra pins on it, which may have left B&N open to a proprietary connector that would allow for additional device connectivity via the micro-USB port.
I've purchased a number of micro-USB adapters in order to plug various devices into the micro-USB port of the NC, with zero success (keyboards, USB headsets, mice, etc). Clearly that port isn't currently operating in that manner, and I'm sure there's a tech savy person that could drop in and give us a simple answer to why this is.
I was also curious about the headphone port possibly have mic capabilities, and was about to purchase a single post headset to test the theory, but then I took a (very unscientific) look at the headphones jack, and it would appear that there aren't enough ring connectors inside it to support an additional channel. Obviously the guys doing the tear-down would know far more about this than myself.
We'll see what turns up over the coming months.
Found this teardown post with spec list and it says that there is no mic input in the headphone jack. I know I read another teardown post which I cannot find that indicated the same thing. I agree that our best bet may be getting the bluetooth working.
KryptoNyte39 said:
I've purchased a number of micro-USB adapters in order to plug various devices into the micro-USB port of the NC, with zero success (keyboards, USB headsets, mice, etc). Clearly that port isn't currently operating in that manner, and I'm sure there's a tech savy person that could drop in and give us a simple answer to why this is.
Click to expand...
Click to collapse
Can you detail what sort of adapters you tried? Have you tried a gender changer (type a-a female-female) on the end of the nook cord attached to a keyboard?
Someone correct me if I am wrong but, in order for the usb to do something other than just charge and connect to the PC from the usb, you would have to activate USB host, which is not turned on in stock. Hence no of the fancy toys will work. There are a lot of funky pins on the connector so it may have to be some funky adapter, assuming you get usb host running. There are a lot of hackery potential, but until that project is completed, the wait for bluetooth continues.
Go Occip! (the guy hacking the bluetooth.)
Mike
This is what I've been thinking about. I don't have the ability to figure out how to activate the USB Host function, but I read several posts about how it worked on N1, D1, and Hero.
The thing I want to try is using a micro USB to 3.5mm minijack cable like those that came with the G1. It's the only thing I could think of that could logically be supported by the default system since it was necessary in 1.5 on that device.
I don't think anyone is using VOIP yet, but you may be very interested in this thread:
http://forum.xda-developers.com/showthread.php?t=989637
I'm running the CM7 image via SD card from that thread, and the Bluetooth works, and I can connect to my phone and my headset. Several people can connect to their standalone GPS units. Worth watching.
Anyone know if the micro USB port is even powered?
On a lot of phones, the USB connectors aren't powered by the device (like my HD2), so you have to hack together a proper setup that supplies power.
i am trying to connect my galaxy note to my Infiniti g37 nav screen which has standard av input i was able to do this with my previous jail broken iphone but i have not been able to find any cords that will plug into mhl for standard av. Does anybody know of a way to do this or a place i can buy this type of cord i have seen a way to do a lengthy conversion process with mhl to hdmi out, hdmi to av converter box ,av cables to video in, but that's allot of cordage to try to squeeze into my center console and none of the converter boxes connect to car power port and would require an additional power adapter. so again to restate im looking for an easy way to connect my note to for video out to my av in device
Hi All,
Is anyone aware of a dock for Android phones, similar to the laptop docks. It should be able to charge, provide HDMI and sound output. And also a port to connect a Mass storage device.
This is possible with the USB OTG. But I am not sure about the drivers for the HDMI out or audio out. Is there any place where we can find android drivers for these devices.
Thank you.
I just picked up the "multimedia" dock straight from Samsung, and really all it does is charge the phone. No access to the headphone jack as it becomes blocked, and as far as I know, there is no HDMI output for my NS4G. Granted, it does look nice with the phone docked, and it does everything I need it to do anyway - charge the phone and make it into a nice desktop clock. $17 on eBay in case you are interested. Let us know if you manage to find what you are looking for. Would be nice to find out I can do HDMI out after all.
USB/charging dock
As far as I know, you won't find any dock with HDMI or sound support for the Nexus S. All docks for this device do exactly the same thing, they only charge, and mount the SD when connected to a PC. You can find two or three different models on ebay for 20 or 30 dollars.
zeigan said:
I just picked up the "multimedia" dock straight from Samsung, and really all it does is charge the phone. No access to the headphone jack as it becomes blocked, and as far as I know, there is no HDMI output for my NS4G. Granted, it does look nice with the phone docked, and it does everything I need it to do anyway - charge the phone and make it into a nice desktop clock. $17 on eBay in case you are interested. Let us know if you manage to find what you are looking for. Would be nice to find out I can do HDMI out after all.
Click to expand...
Click to collapse
Can't you put it on the side to use it as a clock + access the headphones port?
its a good thing
polobunny said:
Can't you put it on the side to use it as a clock + access the headphones port?
Click to expand...
Click to collapse
no if you look at the dock its molded for the back phone, kinda of nice if you use your phone as alarm clock though
Sent from my Nexus S 4G using Tapatalk
USB Host mode driver for Nexus S
for tv out, follow this thread http://forum.xda-developers.com/showthread.php?t=1459304 !
I would really love a USB dock/ HDMI adapter for the Nexus S too. I watch stuff i dloaded from the internet on it all the time and i would love to be able to connect it to the big screen
Is there any way to use pen drives directly with nexus s, like it does in nokia n8
Didn't know we had our own thread now.
Anyways so I've been trying to hook my active up to my monitor -- an ASUS VX238H -- and I finally got the correct MHL to HDMI adapter, but I still can't get it to work and I've tried three different HDMI cables. With this Sypder C Class cable and this Belkin cable I have the phone would detect being plugged up to the HDMI, but the monitor wouldn't recognize it, and with this off brand cable when I plug it in my monitor goes black (and it has two HDMI inputs with my computer plugged into HDMI1 and the phone plugged into HDMI2). Is there a specific cable I need or perhaps cables without a specific feature (such as Ethernet)?
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
dibeachdude said:
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
Click to expand...
Click to collapse
From what I read that was only needed for wireless connections and that HDMI connections didn't need that. Guess I'll give it a shot after work and see if that is the issue, but still I don't understand why the one cable would cause my monitor to go black despite me not having selected the HDMI2 input...
I have a cable left over from my Motorola Atrix 4G. I will give it a try tonight to see if I get any better results.
dibeachdude said:
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
Click to expand...
Click to collapse
Ok so I tried enabling Screen Mirroring but it told me to disconnect the HDMI cable first. Guess I'll just have to wait till I get paid again and get a different HDMI cable to try with (one without Ethernet) and see if I have better results.
I was reading an article from pcmag about screen mirroring (Google "How to Connect Your Samsung Galaxy S 4 to Your TV"). It said something about using a specific MHL to HDMI connector and then connecting a separate HDMI cable and a power cable. I'm not sure why you would need all of the extra cables, especially the power cable. I would think that the digital audio and video signals would be low enough power that it would use less power than the backlight. Maybe there is something specific about the pinout of the Samsung USB that requires that particular cable. If I get a chance to try my other cable tonight, I will post the results. Good luck.
dibeachdude said:
I was reading an article from pcmag about screen mirroring (Google "How to Connect Your Samsung Galaxy S 4 to Your TV"). It said something about using a specific MHL to HDMI connector and then connecting a separate HDMI cable and a power cable. I'm not sure why you would need all of the extra cables, especially the power cable. I would think that the digital audio and video signals would be low enough power that it would use less power than the backlight. Maybe there is something specific about the pinout of the Samsung USB that requires that particular cable. If I get a chance to try my other cable tonight, I will post the results. Good luck.
Click to expand...
Click to collapse
I had posted in the S4 QA section there are two different types of MHL-HDMI adapters.
A 5-pin variation for the older generation of phones like the S2 and the Infuse.
A 11-pin variation for the newer generation of phones like the S3 and S4.
The adapter does need some power to power it since it is an electronic device but not much. The rest of the power that's not used by the adapter is used to charge the phone.
I initially bought a 5-pin adapter because I didn't research enough before hand (it was a bit of an impulse buy) and so I didn't know there were two different types. I then bought an official Samsung MHL-HDMI 11-pin adpater which is what I've been using now.
I really think the issue is with the cables I'm trying to use so when I do get paid again I'm going to buy a HDMI cable with just the base A/V transfer and see if that works.
Please ignore what I said altogether. I assumed that I had a cable from my previous phone that would work for HDMI, but the cable that I have isn't even a USB connector. It has a completely different plug on it. I never used it on my last phone, and I didn't even remember the phone having two different plugs. Now, I am wanting to get the proper cable and try it. I have always thought that it would be cool to run XBMC on my phone.
Found this one: http://www.ebay.com/itm/Samsung-MHL-To-HDTV-Smart-Adapter-For-Samsung-Galaxy-S3-S-III-EPL-3FHUBEGSTA-/261233789076?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item3cd2bf4894
I will post my results when it comes in.
dibeachdude said:
Please ignore what I said altogether. I assumed that I had a cable from my previous phone that would work for HDMI, but the cable that I have isn't even a USB connector. The one that I have is an entirely different interface. I never used it on my last phone, and I didn't even remember the phone having two different plugs. Now, I am wanting to the proper cable and try it. I have always that the it would be cool to run XBMC on my phone.
Found this one: http://www.ebay.com/itm/Samsung-MHL-To-HDTV-Smart-Adapter-For-Samsung-Galaxy-S3-S-III-EPL-3FHUBEGSTA-/261233789076?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item3cd2bf4894
I will post my results when it comes in.
Click to expand...
Click to collapse
That's the one I have now.
My cable came in today, and it works perfectly. It is the original Samsung (EPL-3FHUBEGSTA) MHL to HDMI cable. I noticed that they raised the price on ebay by $5.00. They can still be found for around $11 or $12 though. All I did was plug mine in to the phone, the power cable, and HDMI, and then, I selected "Screen Mirroring" in settings. The problem may be with you monitor. I have seen some monitors that do not connect with certain HDMI devices. I think it has something to do with supporting 1080i vs 1080p. I've never been able to test the theory, but at work we have a large plasma TV that very few devices (almost none) will connect to. I have found a few other, usually smaller, monitors that seem to do the same thing. Good luck.
dibeachdude said:
My cable came in today, and it works perfectly. It is the original Samsung (EPL-3FHUBEGSTA) MHL to HDMI cable. I noticed that they raised the price on ebay by $5.00. They can still be found for around $11 or $12 though. All I did was plug mine in to the phone, the power cable, and HDMI, and then, I selected "Screen Mirroring" in settings. The problem may be with you monitor. I have seen some monitors that do not connect with certain HDMI devices. I think it has something to do with supporting 1080i vs 1080p. I've never been able to test the theory, but at work we have a large plasma TV that very few devices (almost none) will connect to. I have found a few other, usually smaller, monitors that seem to do the same thing. Good luck.
Click to expand...
Click to collapse
Are you using a HDMI cable with Ethernet or just an A/V HDMI cable? All the HDMI cables I have have Ethernet except maybe my 360 HDMI cable. I'm going to order this other cable online and try with that and if it doesn't work then I'm just going to assume my monitor is like what you said. Just a fyi it's supposed to support 1080p.
Ok just thought I'd provide an update. I got the Belkin A/V (no Ethernet) cable in today and it too didn't work so I'm just going to chalk it up to my monitor not supporting the MHL signal. I suppose I shouldn't be too surprised since it is a computer monitor after all.
Hey Guys, been lurking for awhile with my Note 2 and before that my LG G2x, A few questions I hope someone can point me in the right direction as you guys have before just using the search button. I've done some searching but have found conflicting answers as well as not finding my certain situation
I recently broke my Verizon Note 2, not flashed, or rooted just basic stock updates and such. The screen and touch input are useless. I came across this 5-in-1 Micro USB MHL to HDMI Cable with OTG Camera Connection Kit / 11-pin Micro USB Adapter for Samsung Galaxy S2 S3 S4 i9500 Galaxy Note, Note II (Micro 5-pin to SD card slot/ TF card slot/Micro USB2.0/HDMI) on amazon and bought it without researching too much further.
I figured I would be able to plug in a USB keyboard or mouse and my HDMI connection to TV and away we go. The phone needs to be sent back to the insurance company and I'd like to get files off the phone to retain or at the very least erase everything. I have a lock screen with PIN and I don't have Bluetooth enabled or any wireless keyboard/mouse paired on the phone so I haven't been able to do too much, it seems that only MHL or OTG will work not both. I know the Samsung Smart Dock will work but since I already ordered, received and opened this device I thought I could get this working. When I plug HDMI, USB keyboard and external power from MicroUSB, in a what seems to be a certain necessary order, I get the note 2 to mirror onto my TV and a USB icon in the upper left hand corner. The optical mouse light turns on like its getting power but no pointer shows on screen. I've had the same indicators with a keyboard but when I input on keyboard no response on screen. I'm kind of lost in what to do next or if the Smart Dock is the best option. I've seen some posts in my searching that people opened up their OTG or MHL device and replaced or added resistors. I don't think that its a viable option as I can return this item less the restocking fee and buy the Smart Dock at a reasonable price. However, that being said I welcome any input as I am looking for help. Thanks in advance for any input or ideas.
If you can view your screen, use an otg cable first and connect a wireless or a wired mouse. With that you can atleast access your phone. U can then turn on ur wifi or bluetooth and connect other device.
Sent from my GT-N7100 using Tapatalk
Not able to view screen at all on Note 2. Only when is hooked up to the device I bought am I able to see it on TV. If the device is capable of doing both which I'm not sure of it, I'm kinda hoping that it thinks the USB keyboard or mouses that I have tried are mass storage. But again I don't know