Can't copy the big files (like video ,more than 200M) to my NOOK 8G disk by the USB cable ,but it's OK for the small files (like document, mp3 , less than 100M). After the copy start ,The PC will show the error "the disk is not ready", then the copy is interrupted. Erased and rebooted the NOOK, changed the PC and the USB cable, but the problem still exists. What's the problem? Thanks!
Related
description: During file transfer from my PC to my Diamond the process was stuck, then sot reset i have looked on my diamond and couldn't find Internal Storage via file explorer.
via memory manager there is a message of " Internal Storage: not installed".
i dont have backup of Internal storage and i don't want to format it. how i can safe my Diamond?
thx
Internal Storage disappears when you connect USB
Hi
When you connect USB, you get two options - Disk Drive and Active Sync. If you connect as Disk Drive, the PC takes over and it cannot be seen inside the explorer of Diamond. Better connect with Active Sync for transferring data.
this works try it. google htc diamond internal storage hot fix.
I also have the problem that the internals storage can not be found anymore. I tried everything including double hard reset,... - internal storage could not be formated because it was not found or "not installed". I can connect my Diamond to the PC via ActiveSync but not as a storage device (harddisc).
Cant`t install the sprint hotfix on my german Diamond either (wrong device message).
There is a chance that your internal storage is infected by some virus. The virus for windows desktop versions might not affect Windows mobile, certain times, it could block you from accessing your internal storage.
I had this issue with my Symbian phone (nokia N91), where i got infected by an autorun.inf file, and symbian was unable to access data from the builtin harddrive.
I had this problem last night. Here's how I fixed it:
Connect the phone via USB, and select Disk Drive.
Go into Windows Explorer and wait for the drive to show up. Don't try opening it!
Just right click the drive and wait... When I did this, this step took 10 minutes!
When the menu finally loads up, click Format.
You should be able to leave the defaults that come up. But here's the settings to the best of my memory.
Format: Fat 32, Allocation: 4032 (or something like that), check Quick Format then click Format. And wait some more...
For more info read: http://forum.ppcgeeks.com/showthread.php?t=67255&highlight=lost+internal+storage
Post #7 was helpful.
I'm having multiple problems connecting my NC to my Win7 PC via USB, particularly from stock 1.2. Every time I connect, Windows attempts to install device drivers, and is successful only half the time, at most. If it successfully mounts the NC as USB storage, it may or may not also mount the SD card (again, maybe half the time).
I also boot CM7 from an SD card using verygreen's size-agnostic image. From there, the connection has been 100% reliable--turn on USB tethering, and both the system and storage partitions get mounted as USB storage.
HOWEVER, plugging in the NC from either OS frequently causes a really odd problem with my external HDD: both the drive and the uppermost layer of the file structure will still be listed in Computer, but click any of those folders and they show as empty. The HDD is also "in use" if I attempt a safe eject, but unplugging the USB and plugging it back in solves the problem.
Are other people running 64-bit Windows 7 having these problems? Any idea what could be causing my PC to get 'confused' about the HDD?
Does anyone know why the SGN (or is it all android phones) do not multitask during file transfer to and from the PC?
I transfer many/large files to and from the external 64GB sandisk and would like to be able to use the phone during the file transfer - what is the problem - even the iphone can do this...
mitch000 said:
Does anyone know why the SGN (or is it all android phones) do not multitask during file transfer to and from the PC?
I transfer many/large files to and from the external 64GB sandisk and would like to be able to use the phone during the file transfer - what is the problem - even the iphone can do this...
Click to expand...
Click to collapse
You connecting the phone through the MTP protocol or the USB mode?
In USB mode the apps and widgets that are on sd card will stop working and even can hang the phone as they stop responding to the system commands!
I connect my SGN via the USB cable to my PC so i can transfer files to the SGN. I have USB debugging off.
I have had no issues with copying files back and forth between my PC and SGN.
My un-answered question still stands: Why is there no multitasking during USB file transfer like on other smartphones?
When I connect my 4s (EU) to my PC, it detects the SD card (128GB Kingston or 64GB, both tried exFat and FAT32 formatted), but when opening the contents, it says there's nothing on it, while it has over 40 gb of data on it...!
What's going on? The card is up to spec!?!
The phone's own memory is shown correctly and I can access all maps. The SD card however is detected, but not accessible.
The only files I can see are the ones I copy from PC to phone's sd card over USB connection. But I want to copy photos and videos from phone to PC.....
I already tried uninstalling the Alcatel Idol 4s driver, and reconnected to get this phone mounted again, and the result is the same.
Anyone have this too? Fix?
PS: I've tried FAT32 formatting as well as ExFAT, both cases the PC detects the card, even tells me how much space is available, but shows NO contents and tells me the map is EMPTY!?!?!
Do you try usb debugging? Is ur phone locked when you connect it to pc?
7.1.2 lineage (although the following happens from a very long time)
So I plug my nook hd+ in my laptop. I select file transfer (MTP) option. Laptop shows me the storage and the external microSD card. I'm trying to make order in my files in the internal storage using the pc, but when I cut a file and paste it in another directory of the internal storage I hear the windows error sound, and the file doesn't get pasted. And it disappeared.
Then I try to copy a thing to another directory and bam, error sound and nothing done.
I already uninstalled the nook from device manager, fixed nothing. What is this problem and how can I solve it?
Also, I cannot change the scheduler. When I try it freezes the tablet and I have to reboot manually