hello all,
question about the 3 button fix for the captivate. I just got the captivate a few months back and before i decided to rom it i investigated all the recovery tools i would need just in case.
I found 2 different variants of Odin3 one that needed a pit file and PDA file and another that had just one click restore to 2.1.
I tried the pit / PDA first if i recall it appeared to lock up, not sure on what part but i got it back in DL mode and then tried the one click which worked.
now let me preface this with before i tried anything i ensured the 3 button combo for download mode worked, and it did. I flashed Apex 5.2 and ever since then the 3 button combo ceased to work. I recently flashed to Firefly 3.0 and still the 3 button doesnt work, it would also appear the recovery mode does not work as well.
I have been getting to these modes using ADB, which works fine, but I would love to get 3 button back... but if its a risky procedure i will live with it, i do have a jig on the way, which just in case i can use to get back. but that leaves recovery mode not really accessable unless i use ADB?
any how thoughts comments suggestions are all welcome and thanks for being such an awesome site!
On a custom rom, hold the power button. Extended power menu has recovery and download right there.
How have you not seen it??
also SEARCH there is an odin that fixes the 3 button combo...
download mode is 2 button combo and no way to loose it.
hold both volumes + then plug in usb (keep held til screen comes on)
recovery mode is 3 button combo..
hold both volumes + then hold power (keep ALL held til screen comes on for 3 seconds)
studacris,
Yes i have seen the reboot into recovery, which is great the only issue i have is when flashing a different rom i want a back out solution. I also have found the fix, but was wondering how risky is it to apply this fix, and will it stay fixed? i would rather live with a minor inconvenience then a hard brick situation. thanks for the info=)
edit: this is the thread i was reading for the fix is this the most up to date one? also the attachment is missing the PIT file, is it needed anymore?
http://forum.xda-developers.com/showthread.php?t=818439
TRusselo,
yeah i cant do either of those, which is my concern
odin one click flashes both bootloaders but sometimes, in later build phones the one click sbl.bin will, lose it's combo. The fix flashes the secondary bootloader, that is known to always work.
It's about as risky to flash as odin one click if not safer because it's only flashing one bootloader instead of both.
The pit file isn't needed you are not messing with the partitioning table in the least. Just put the .tar in the pda slot.
Just note, if you go to gingerbread, go back to stock with the one click. If you use the 3 button fix version you will guaranteed brick your phone.
Important to note that if you've flashed an I9000 based ROM your 3 button may have changed to vol up-home-power. If that doesn't work and you're on a 2.1 or 2.2 ROM then you've probably just lost the sbl for 3 button and need to reflash it.
You should always be able to get into download mode via hold down vol up and vol down and plugging in the USB cable, I've never lost that.
awesome thank you for putting my mind at ease,
if i flash the fix will i need to flash the fix every time i flash to a new froyo based rom?
hmm odd cause i seem to have lost download mode.
what i have been doing to get into DL mode is;
turn off the phone,
pull battery and sim (i dont have an external SD),
put battery back
hold vol up and vol down then plug in usb cable that is connected to a PC i will get a battery charging display on screen
once you flash it you should be good to flash whatever else on top of it.
one last thing,
in that thread i linked with the fix, the instructions say to take a PDA.tar file and a pit file which was added with the odin download, but the odin download is by itself no pit file, opening the PDA.tar file i can see the SBL.bin file so i am assuming that we may not need the pit file?
you dont need the pit. it is fine.
thank you, i'll give it a try next time a flash a new rom =)
i appreciate all the info guys =)
Related
Hey guys!
I'm new to Android and how it all works.
here I have a Galaxy S I9000 on T-Mobile with 2.1
I wanted to upgrade to 2.2 and from what I've read on the forums I did the following:
downloaded Odin and .pit files (used odin 1.7, and pit file ending in 512)
then used for PDA file I9000UGJL2_homebinary_add_param.tar
plugged my phone in, went into download mode and started installing the 2.2 I guess.. and now is COMPLETELY DEAD!! won't turn on at all and I'm really frustrated. I removed the battery and the sd card and tried to boot it up few times ... but NOTHING!!!
please help!!!
You can try this, remove the battery then just press the buttons for download mode while its held down find a way to insert the battery back, this should give you back your download mode.
my phone doesn't have the 3 button thing... my home button is a touch button not a regular one.
Then do the combo keys required for your phone ( if any ) while the battery is removed and insert the battery while having it held down. Should have researched a lot before flashing with Odin.
Don't worry, the t-mobile version is pretty hard to brick
here is the correct forum for ur phone: http://forum.xda-developers.com/forumdisplay.php?f=708
EarlZ said:
Then do the combo keys required for your phone ( if any ) while the battery is removed and insert the battery while having it held down. Should have researched a lot before flashing with Odin.
Click to expand...
Click to collapse
what is the combo key? I can't find it anywhere.
p.s. just found out that my phone is hardware locked, so I guess I'm done with the phone good thing I got the best buy black tie protection....not till saturday tho.
Hi
I tried to remove Bejeweled using a program I downloaded (I can't remember the name). It said it would reboot twice, but it seemed to have frozen after the first reboot, so I pulled the battery.
Now, every time I try to turn the phone on, it goes into ClockworkMod 2.5.1.0 and stays there. None of the buttons do anything at all, so I can't get to any of the options.
Samsung Kies and Odin 3 don't seem to recognise the phone when I plug it in by USB and I can't find any button combinations that stop it going to ClockworkMod.
I only got the phone a few days ago, so I'm not sure if I can send it back and claim the Froyo update on Kies broke it. I would prefer to fix it myself though. Is there a way to do this?
Thanks in advance.
So can you get into download mode or not?
No, I can't get to anything other than clockworkmod, and that freezes.
When I plug the usb lead in, it turns on without pressing the power button, but still freezes at clockworkmod. Hope that helps.
ld9211 said:
When I plug the usb lead in, it turns on without pressing the power button. Hope that helps.
Click to expand...
Click to collapse
GOOD
What you want to do is, pull battery out, put it back in, Hold volume down and Home button, THEN put in the usb lead, That should put you into download mode, then you can flash thru odin
Pull ur battery so phone is completely dark hold the 3 button combo for the download mode the phone should power in download mode or last option is get a jig for a pound on ebay
Sent from my GT-I9000 using Tapatalk
Thanks for your help. When I tried azzledazzle's solution, it went to frozen clockworkmod again, but the Galaxy S screen at the start doesn't show. Also, my version has never responded to any key combos, even when it worked.
I have attached a picture of what Odin shows when I put the USB lead in. Not sure if I can do anything with it. By the way, I've never used Odin before so I don't know if there are any settings I need to change.
I'll order one of those 'jigs' but hopefully I can get it fixed before that arrives.
you have selected 512 pit, but you havent ticked re-partition, that is whats causing your problem.
you say your phone never responded to button combo's. does that mean you have never been in download mode ??
The 'jig' has arrived and put me straight into download mode! Definitely recommended for anyone who can't use the three button combos. I have used a new rom with the 512 pit and repartition unchecked, and Android 2.2.1 installed fine. This also solved the button combo problem.
In reply to azzledazzle, the only time I saw download mode before the jig arrived was when Kies mucked up an update.
ok guys i'm definitely a noob at this but i think i messed up this morning downloading the gb drivers for my captivate. i was running serendipity 6.4 and i was trying to flash serendipity VII. i didn't flash back to stock 2.1 eclair with odin one click before i followed the instructions on downloading the new drivers for the gb. i went to the power menu on the 6.4 and hit download mode and plugged in the usb. it went halfway through the downloading process and stopped. my screen was blank without the downloading sign anymore and on odin it was at a halt. i waited for about 45 minutes for it to proceed and nothing so i unplugged it. when i did the factory recovery screen came up and i could use the volume up and down buttons to scroll through the menu choices but it wouldn't let me use the power button to make a selection at all like the power button wasn't working. i pulled the battery and put it back in after a while and now all i get is the galaxy s gt-i9000 samsung screen and nothing else. it wont let me back into recovery or download mode no matter what button combo i try. did i brick my phone and is there a way for me to fix this without having to buy another one? any help would be greatly appreciated.( guys, i realized i messed up shortly after it was done and messed up that i should've odin one clicked it back to factory before i did this,but by that time it was too late.)
When a problem comes along, you must jig it!
You might want to look into buying/making a jig to get you to a place where you can repair your phone.
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Please use more descriptive thread titles. Your title is useless to anyone doing a search.
440hsp said:
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Click to expand...
Click to collapse
Could you please quote/reply to these steps to getting into download mode?
From powered-off state, Hold V+/V-, insert USB cable
With battery out, Hold V+/V-, insert USB cable
From powered-off state, Hold V-, press & hold power button
If you haven't tried this combo yet, try using the home softkey in place of the power button with some of these combos - there have been reports of the power button getting remapped to the home softkey.
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
440hsp said:
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
Click to expand...
Click to collapse
Just out of curiosity, when you're at the android man/exclamation screen, if you have odin up already and plug in the phone, does it recognize that the phone's attached?
If so, you might be able to use the odin one-click to get back to stock eclair.
i will try that and get back to you. hopefully it will work.
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
440hsp said:
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
Click to expand...
Click to collapse
Hmm... I've reached the end of things I know to say to try. I'm assuming you've tried changing which port you're plugging your phone into on the computer?
Also, have you tried using adb to reboot to download? If not, get adb and use the "adb reboot download" command (I think...) to see if that gets you there. You may need to be in the recovery menu (if you can get back there), or the exclamation point / android guy might work, too.
Although, if you can get back to recovery, you might be able to mount your phone to the computer, drop a copy of CWM on there and reinstall that so you can have more options available to you.
Your best bet at this point might be to buy or build a jig. That should hopefully make the phone go into download mode so that you can get to where you need to be.
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
440hsp said:
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
Click to expand...
Click to collapse
Nope, root isn't needed to flash that ROM.
440hsp said:
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
Click to expand...
Click to collapse
Good to hear there's a glimmer of hope. If you do manage to get there, you might want to make an EFS backup before moving any further, just so you have one more tool in your arsenal of preventing phone problems.
After reading this whole thread I think your problem is that you now have gingerbread bootoaders and your button combos have changed and you don't know it.
Sent from my SAMSUNG-SGH-I897
i think you may be right about having the GB bootloaders. now first question is how to i manage to make an efs back up? secondly, if i have the GB bootloaders then what do i do to flash the complete serendiptiy VII onto the phone? the reason why i ask is because the phone just quit downloading the flash in the middle of the download and that's when all hell broke loose. lolol. but you guys are right. i might just have a glimmer of hope.
If you do have the GB bootloaders, you should (theoretically) be able to get to download mode with the volume - & power button combination. This may take a little fiddling to find a timing after you've started the phone to find out when you can get to it.
As far as flashing Serendipity, you could try, but my advice would be to try and get to stock Eclair first and then go forwards. You're in a place with a lot of variables, and stock Eclair would be as variable-free as you're likely to get.
As far as backing up the EFS, under the CWM recovery menu, there's an option to make a nandroid backup. That's step 1. Once you've made the backup, just copy it from the clockworkmod folder to a safe place.
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
440hsp said:
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
Click to expand...
Click to collapse
--------------------> delete
+1 on the jig...odin is very finicky and a jig will get you to download mode when you need it most...
buy or make one...worth every penny.
I had Cognition 4 flashed but had a problem that whenever the battery was removed when the phone was on, about half of my apps, wifi, and texting would force close on reboot and never be able to open until I reflashed Cogntion. Because of this, I decided to try Serendipity VII. I put the zip file on my phone, rebooted into recovery, then tried to do the same thing that I did for Cognition. When I did this it said that it was installing, then said install complete without rebooting. I decided to reboot the phone, and when I tried, it keeps looping on the att screen. I do not see the battery charge signal when I plug it in. I see a loading gear for the battery for about five seconds, then the screen has electric looking blue lines flash through the center and then nothing. I cannot boot into recovery or download, it just keeps looping on the ATT screen.
Make or buy a jig to force it into download mode.
Sent from 234 Elm Street
slow_DC4 said:
Make or buy a jig to force it into download mode.
Sent from 234 Elm Street
Click to expand...
Click to collapse
How do I force it into download mode?
So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*
cappysw10 said:
So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*
Click to expand...
Click to collapse
Ya, I had a feeling I should have read more about it, but I was anxious and stupid. I didn't do any of those things. No matter what I try I can't get to recovery. How would I get into download?
JIG
10 char
Thanks for all the help, I will be buying a jig from amazon for about ten bucks. I hope this works. But if it doesn't, at least this will teach me to read instructions before doing something that I don't understand very well.
to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped
srkoza said:
to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped
Click to expand...
Click to collapse
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway
jmj45 said:
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway
Click to expand...
Click to collapse
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers
Mr. Janderson said:
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers
Click to expand...
Click to collapse
I tried this and all it did was do the att loop screen thing. Also, my computer dinged that it saw a usb device being plugged in, but then the restart loop restarts the phone and continues this indefinitely. Thanks for the help anyway.
You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.
abmicyau said:
You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.
Click to expand...
Click to collapse
Thanks, but I already screwed up my phone by doing something that I did not fully understand, it's a small wonder that I can use Linux and not be too confused. I think I will take the easy way out with this one.
Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?
Mr. Janderson said:
Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?
Click to expand...
Click to collapse
It loops if whether or not I hold any buttons down. If I hold the power button down while trying to get into download mode, then it just turns it off.
Turn off the phone, remove the battery, get a stock odin one click for the captivate.
I897UCJF6-final-OCD-REV0 seems to be a reliable flash when I run into trouble.
Start odin, plug the phone into the USB cable, hold the volume up/down key or try any combination up/down or both. Insert the battery and hopefully it will go into download mode.
Been reliable so far...
Hi. I'm unable to get into recovery mode after I flashed the Talon kernel as per the instructions here.
http://www.team-continuum.net/forum...ses/(guide)general-installation-instructions/
I'm consistently able to get into download mode and reflashed the talon 0.1.2 kernel as per the instructions there, but still to no avail. Any other suggestions to get my phone into CWM ?
Im trying to flash Continuum 6
Might as well get the Jig easy Download mode xD. I made mine myself cost a whole $2.50 for one xD
I am hoping someone can help me out. Yesterday I was using Odin to flash Apex 10. I was loading the bootloaders when the usb cable was pulled out and I didnt have the battery cover on and the battery fell out. Now I cant get into download mode. I have pulled the battery a thousand times. Before this happened I was able to use the three buttons to get into download mode. I need to start the process all over but cant do anything without getting into download mode. I dont have a jig. I searched and saw where I could download the three button fix. When I use CWM and reboot to recovery it doesnt give me the option to install from SD card.
The phone works but when I turn it on the booting animation says Galaxy i9000. Im currently on 2.2...baseband I897UCKB2.
Can I use AIO toolbox to correct this problem? After messing up last night I'm a little nervous at this point.
Also could someone point me to the correct bootloader for the Captivate? I want to make sure I used the right one.
Thanks in advance and please dont flame me. I searched this forum and honestly what I found only confused me more.
^
Do not use the 3 button fix or u may hard brick ur phone.
The i897 gingerbread bootloaders link is in my signature below.
Right click and run as administrator the Odin 1st. Then...
To get in download mode try leaving out ur battery, connect usb end of cable to usb port in the back of desktop computer or 1st port on laptop, connect micro usb end to phone while holding volume down button only , replace battery and cover, Odin may recognize your phone now, if so flash the i897 booloaders. Set phone aside and wait, should not take long.
If you get the "phone ! computer firmware upgrade fail" screen, don't worry, just treat it as a download screen. If all this does not work, then u will need to make or buy a jig.
Do not flash the 3 button fix over this you will hard brick your phone
If u can boot your phone after all this thn you are one lucky guy, You messed while flashing th BL and your phone still works, If you have i9000 boot screen that means you have flashed the i9000 bootloaders.
After flashing the i9000 BL the combination for the DL and recovery chages to.
Volume down plus power= DL
Volume up plus power = Recovery
.
I swear I love both of you. I got the phone in download mode by volume dwn + power. I will see if I can accomplish what I set out to do last night.