Database Develop

MMS problem on ANY non-stock ROM

I have problem with MMS on any non stock ROM. I tried Darky 9.0.2, Insanity 0.5.2. MMS is permently on SENDING status. I cant open MMS from other people too.
I have deleted all APN and retyped all data according to my providers www. APN type set to "mms". I restored default APN settings... no success.
Important thing is that all non stock ROMS gives me the same 3 APNs. One is my prioviders APN and other two are strange APN from some kind MVNO providers thus I suspect that all ROM-cooks use the same multi CSC file.
On stock, clean ROM's MMS works perfectly.
Any idea how to make MMS working ??? Flash CSC specific to mu country with ODIN ???

I have the same issue also!

I suspect that all ROM-cooks use the same multi CSC file.
Nope but you do not flash a rom based on an area without your network .
Suggestion is to use the Kitchen build your own rom and choose your CSC .
http://romkitchen.org/sgs/?s=home
http://forum.xda-developers.com/showthread.php?t=817703
jje

(MMS And Send/Receive Picture Fix) Get Your Messaging working on 2.3.4 HKTW

Go to Mobile network settings and go to SMSC Settings and put in +13123149810 click update. This number is for ATT US. Try looking up your SMSC Android settings on your carrier and putting it in andn hopefully it works. If not try restarting and see if it works then. Make sure u have all of your APN settings setup for your carrier 2.
I Have Radio 01.97.00R http://forum.xda-developers.com/showthread.php?t=1128963
I upload my APN for AT&T, (Update) Should be able to send and receive pictures and video to and from people for At&t only!
Download ApnManager From Market.
Put ApnManager Folder in to the internal sdcard.
Open ApnManager and click resort APN. See if u can now send and receive, If not try restarting.
My old APN had Custom Tethering that messed up Picture Messaging! You can try deleting that if u can't send or receive pictures!2.

This doesn't work for me. My SMSC number was already the one you listed, and MMS doesn't work still...

so how many APN's are listed on your setting....i have 4 (AT&T US, AT&T HSDPA, AT&T US Tether, AT&T US MMS)
i get mms now, but i got a much slower speed. around 1MB download and upload speed.
also, which one are you generally suppose to be connected to? I'm connected to AT&T US
EDIT: Actually i just found out, after about 10 minutes, your phone should be fully logged into their server. I live in Las Vegas so the territory has VERY fluctuant connection, i had moments where id get 7.2MB and then jumps down to 0.8MB. Alright, so the apn worked perfectly.

i had to enter a mms apn for fido to get mms working, smsc number was already there for my carrier. here's the settings.
Fido mms
apn: mms.fido.ca
mmsc http://mms.fido.ca
mms proxy: 205.151.011.013
mcc: 302
mnc: 370
apn type: mms

Still having issues sending and receiving MMS, I had it working previously but don't know what has changed. I've got everything set correctly per the instructions. Does anyone have any other possible solutions... though I did find it a tad weird that it still says 4.1.83 for Systerm Version, but my build number correctly reflects that it's 2.3.4. Please help.

flashing the 1.97 radio and using the supplied apn's worked for me. After a reboot.

wicked_beav said:
Still having issues sending and receiving MMS, I had it working previously but don't know what has changed. I've got everything set correctly per the instructions. Does anyone have any other possible solutions... though I did find it a tad weird that it still says 4.1.83 for Systerm Version, but my build number correctly reflects that it's 2.3.4. Please help.
Click to expand...
Click to collapse
maybe trying doing a fresh install of 2.3.4, start by flashing back to 4.1.83. it doesnt sound right that it still says 4.1.83 after you install 2.3.4, might be a bad flash. my system version is 45.3.0.mb860.retail.en.05 after flashing 2.3.4.

I am also still having trouble with my mms...I did a clean flash to 2.3.4 and updated the radio, but I am still not able to view picture messages. My apn's appear to be set correctly...any ideas?

The instructions in the OP worked for me. I had a clean install of 2.3.4 HKTW, new radio, with the v1.8 update rollup fix, and mms would not work.
1. Download APN Manager
2. Copy the folder in the OPs zip file to your Internal SD
3. Open APN Manager and do a Restore
4. Reboot phone
My APN settings were the same before I did this, but it would not work until I followed these instructions.

[Q] In Mexico. Which modem for Telcel?

Serendipity 6.4
Kernel: 2.6.32.9 - [email protected] #32
Baseband Version: I9000UGJK4
Firmware: 2.2.1
And I've also tried
Serendipity VII Build 3
Firmware: 2.3.3
Baseband: I9000TUBJV6
This phone was unlocked and it worked just fine in Taiwan.
I'm now in Baha Mexico, I have a Telcel SIM card, but it just does not work. And I absolutely must get this to work because checking email is critical for me. I don't know what to do. Do I need to update my modem? Which one do I need to update to?
1. My APN settings are all correct for Telcel:
Name: Internet
APN: internet.itelcel.com
Username: webgprs
Password: webgprs2002
MCC: 334
MNC: 020
Authentication Type: PAP
APN Type: Internet
2. I show signal on the signal bar, but no 3G or 1X. It says "Emergency Calls Only."
3. When I go dial the number to activate (*333) I get "Data Network Not Available"
4. When I search for the available Network Operators, Telcel pops up, but if I click on it I get "Unable to connect. Try again later." and "unable to select network. Select automatically." This happens over and over.
5. I called Telcel and it is confirmed that they are still waiting on me to dial in and activate my SIM card, using *333. The problem is, I can't dial in.
AHHHHHHHHHHHHHHH!!!!

Hope I helped
Is your IMEI correct, ive seen that cause problems so make sure you dont have the generic one as that will allow you to connect to some networks but not all, also if you keep having problems i'd suggest odin back to stock (that for sure Works on Telcel's network and if your IMEI is missing it might even give it back)and then update back up SlimBean seams to work quite well for me. Hope i helped, would have answered earlier but just bearly stumbbled on to this thread

agrs22 said:
Is your IMEI correct, ive seen that cause problems so make sure you dont have the generic one as that will allow you to connect to some networks but not all, also if you keep having problems i'd suggest odin back to stock (that for sure Works on Telcel's network and if your IMEI is missing it might even give it back)and then update back up SlimBean seams to work quite well for me. Hope i helped, would have answered earlier but just bearly stumbbled on to this thread
Click to expand...
Click to collapse
Sorry to say that this thread is nearly a year old, this guy probably doesn't need this info anymore

Please HELP! AT&T service is gone after Overcome Flash

Hi I have the ATT Galaxy Tab Model SGH-i987 That I just flashed with Overcome 4.0.0 exactly per the instructions provided by Alterbridge86 here: http://forum.xda-developers.com/showthread.php?t=1881981 I checked and double checked each step before proceeding and even installing the "AT&T JK3 Modem.bin file in Odin as instructed.
Everything went smooth and everything seems to work including WiFi except, I have no AT&T data service at all. No Edge, no 3G, no H, nothing... :crying:
Thanks,
Tom

I also noticed that all my AT&T apps and widgets are gone even though I did a backup with Titaniun Backup as instructed.

well, if you backup, you need to restore.
But be aware that Overcome is GB based, your AT&T stuff is Froyo based.
You may not get it restored and working properly.
Now, do you have WiFi? As in not AT&T cellular. the 802.11g thing.
Can you make call and send sms?
what does it say under baseband in the phone info?

priyana said:
well, if you backup, you need to restore.
But be aware that Overcome is GB based, your AT&T stuff is Froyo based.
You may not get it restored and working properly.
Now, do you have WiFi? As in not AT&T cellular. the 802.11g thing.
Can you make call and send sms?
what does it say under baseband in the phone info?
Click to expand...
Click to collapse
Thanks for the reply... I restored what the overcome instructions told me to back up however, none of the AT&T apps or widgets where among them. My impression based on the instructions for the Overcome Flash was that my AT&T AT&T data plan would work. Out of the instructions I quote " The Overcome ROM/Kernel is intended for GSM-based Samsung GAlaxy Tabs Only! (GT-P1000/T-Mobile*/AT&T*/Telstra* Tabs Only) * Please use the appropriate modems when flashing!
Later it says to flash with the JK3 Modem.bin file which I did. Like I said, I followed the instructions exactly checking each step before proceeding. I had NO errors or hang ups in the installation and everything PASSED and is working fine except that I have no AT&T data service.
WiFi works on my home network. Here is the info requested:
Model Number now says: GT-P1000 before upgrade it was SGH-i987
Baseband Version is now: I9000UGK3 before upgrade it was I987UCK1
Kernel version is now: 2.6.357 Overcome-v4.0.0 #40 before upgrade it was 2.6.32.9 [email protected] #1
Build Number is now: Overcome 7 Series v4.1.0 before upgrade it was FROYO.UCJK1
This is the other info I have now:
Phone number: Same as before upgrade
Network: AT&T
Signal Strength: -92 dBm 9asu
Mobile Network Type: HSDPA
Service State: In Service
Roaming: Not Roaming
Mobile Network State: Disconnected
IMEI: Same as before Upgrade
IMEI SV: 05 this was 02 before upgrade
Network Mode is GSM/WCDMA
I also tried manually setting network operators. When searching two AT&T come up. When I select one of the two AT&T manually it says "your SIM does not allow a connection on this network." It registers to the other just fine however. When I "Select Automatically" It also seems to work.
I tried removing the SIM but all that does is want the Tab to go into initial reboot. when I reinserted the SIM and rebooted nothing had changed.
I can not make calls. An AT&T voice prompt comes up and says "The call you are trying to place is not allowed from this line."
I can also not send or receive SMS messages although I receive no errors. This however may be due to the fact that I previously called AT&T months ago and told them I did not want to receive SMS messages because I was getting all kinds of Spam messages every day and getting charged for them.
I am hoping that maybe phdeez can also chime in here since he says he has the Tab with AT&T. Here is my initial post to XDA that convinced me to update. http://forum.xda-developers.com/showthread.php?t=1982476
Thanks,
Tom

you can try these:
1) go to the modem thread in dev section
http://forum.xda-developers.com/showthread.php?t=1069727
first post has something called AT&T stock modem.
I am not sure if it is the same as Overcome JK3
Actually I would expect JK3 modem to have a "JK3" in the baseband, doesn't it?
Use CWM to flash that one from modem thread and see what the baseband said
(it better say I987UCK1 because it is stock...)
2. make sure you have AT&T APN correctly set.
about not able to make phone call, I think AT&T maintain a list of IMEI and know that you have a tablet. It is too bad that you can't make call, but the modem thing hopefully solve the 3G.
One note to you just as extra knowledge (not needed now), the CWM flashable modem only works for stock (so called BML partition) ROM, like Overcome.
When you move on to CM9 or CM10 (MTD partition rom), you only need to use root explorer to copy the modem.bin to /radio/modem.bin

priyana said:
you can try these:
1) go to the modem thread in dev section
http://forum.xda-developers.com/showthread.php?t=1069727
first post has something called AT&T stock modem.
I am not sure if it is the same as Overcome JK3
Actually I would expect JK3 modem to have a "JK3" in the baseband, doesn't it?
Use CWM to flash that one from modem thread and see what the baseband said
(it better say I987UCK1 because it is stock...)
2. make sure you have AT&T APN correctly set.
about not able to make phone call, I think AT&T maintain a list of IMEI and know that you have a tablet. It is too bad that you can't make call, but the modem thing hopefully solve the 3G.
One note to you just as extra knowledge (not needed now), the CWM flashable modem only works for stock (so called BML partition) ROM, like Overcome.
When you move on to CM9 or CM10 (MTD partition rom), you only need to use root explorer to copy the modem.bin to /radio/modem.bin
Click to expand...
Click to collapse
I agree with what priyana has stated above.
I believe ATT maintains a list of IMEIs to block calling, however there might be a workaround with a different SIM - calling did NOT work before the upgrade, right?
Possible Modem issue, however since you see networks, you're probably good
APN Settings are likely blocking internet
See here for APN settings for ATT link, however I would combine the settings into one APN since you're not using the phone function. So, the APN should look like:
Code:
Name: ATT
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: -
Password: -
Server: -
MMSC: http://mmsc.cingular.com/
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: -
APN Type: mms,supl,default,internet
APN Protocol: ipv4
I wish I could speak from experience on using my Tab with ATT Data (or with Overcome ROM), however as soon as I received it I disabled my plan and took the SIM out. I never actually ran data with ATT's network, and just recently attempted to use my ATT Tab on Tmo. For the longest time my Tab was a wifi-only Tab...

I am sooooo frustrated right now. I've tried several modems and checked and double checked the APN settings. I am beginning to wonder if maybe its not working because I no longer have the AT&T apps or widget? I don't know why they didn't get backup-ed and restored by Titanium Backup. I guess I just didn't have that option checked.
Where can I get the AT&T stock apps and widget?
Any additional help is appreciated...
Oh... Should I maybe try starting all over with the Overcome Flash from the beginning? I am so afraid of bricking my Tab.
Thanks,
Tom

is there at any stage you have baseband I987UCK1 in Overcome ?
keep that modem, and fix other things.

priyana said:
is there at any stage you have baseband I987UCK1 in Overcome ?
keep that modem, and fix other things.
Click to expand...
Click to collapse
I am back on baseband i987UCJK1... This is the original baseband that I had in Froyo and when everything was working and before the root and flash to Gingerbread... (beats head against wall)

post your internet APN here.
edit: and your AT&T plan name
edit2:
http://forums.att.com/t5/Android-Di...Samsung-Galaxy-Tab-for-Froyo-and/td-p/2801333
Name APN Broadband
APN Broadband
MCC 310
MNC 410
All other fields left blank.
or
Name AT&T
APN broadband
MCC 310
MNC 410
All other fields left blank.

priyana said:
post your internet APN here.
edit: and your AT&T plan name
edit2:
http://forums.att.com/t5/Android-Di...Samsung-Galaxy-Tab-for-Froyo-and/td-p/2801333
Name AT&T
APN broadband
MCC 310
MNC 410
All other fields left blank.
Click to expand...
Click to collapse
Ok... THANK YOU!!! THANK YOU!!! THANK YOU!!! :highfive: The above finally worked. I am using the stock AT&T Modem and on baseband ( i987UCJK1 ). Most importantly!!! Create a New APN... And fill out the APN just like it says in the quote by Priyana above and in the article. LEAVE EVERYTHING ELSE BLANK!!! No Proxy, no Port, No MMSC, No MMS info nothing. Working like a charm now.:laugh:
Now if I could only get the phone to work as a side benefit then that would be sweet... I didn't have it before in froyo so that would be new.
Thanks again guys and especially Priyana.
Tom

PLS help :(

Hi i have an s3 LTE telstra i9305 and i flashed it with a few roms and now it wont connect to telstra network .
If i flash the stock rom does it flash the modem back to stock aswel
I get the little bars up the top and it actually finds testra in the network list but gets an error when i goto register on it
the error is something like this sim is not compatible on this network
as i type this im flashing stock rom so i will try it again and give the right error soon thanks
p.s does the stock rom flash bootloader and modem ???

IMEI
first 4 of my IMEI is 3547

hades302 said:
Hi i have an s3 LTE telstra i9305 and i flashed it with a few roms and now it wont connect to telstra network .
If i flash the stock rom does it flash the modem back to stock aswel
>>>>Flashes whatever modem is in the firmware .
the error is something like this sim is not compatible on this network
>> Change sim .
Suggest you manually add your networks APN settings and read the faqs and guides before flashing anything .
Click to expand...
Click to collapse

If its the original rom for my phone shouldnt the APN setting be already set and when i go into the settings to change them they are all none selectable all blanked out you can see the setting but cant change them.
APN - telstra.wap
MCC - 505
MNC - 01
APN type - default,supl
Protocol - IPv4
all other setting say NOT SET

worked it out my sim card has died for some reason