I just upgraded from the official optus 2.2 JP5 (i think) to the JVK 2.3.3 (its european) and the rom itself is working perfectly I can call text but can't get a data connection even when roaming is turned on. I also have a 3g symbol up the top which is weird because it's saying i have connection. YES i have selected my APN again when i flashed the rom with odin i didn't flash the CSC and PHONE is this why? i thought they were just for if you live in europe. thanks
yeah i know there are some compatibility issues when you just flash PDA if it doesnt already have a modem and CSC. Its best to just reflash JVK with the modem and csc from JP5 if you dont want to change.
But check your APN setting to see if its correct. I upgraded my brothers phone and I noticed the APN setting was incorrect (was set to internet instead of yesinternet).
http://ausdroid.net/apns/
dopeee said:
yeah i know there are some compatibility issues when you just flash PDA if it doesnt already have a modem and CSC. Its best to just reflash JVK with the modem and csc from JP5 if you dont want to change.
But check your APN setting to see if its correct. I upgraded my brothers phone and I noticed the APN setting was incorrect (was set to internet instead of yesinternet).
http://ausdroid.net/apns/
Click to expand...
Click to collapse
So far it's working THANKYOU SO MUCH!
I am not getting any 3g ie when I want to look up something on the net using the 3g it just times out - nothing downloading, only after I upgraded to gingerbread 2.3.3 XXJVK.
Kernel is
2.6.35.7-
I9000XXJVK-CL75655
se.infra SEI-28 #2
Any help with this will be much appreciated. Also I am trying to find a way to root this version but every post I go to has a download and when extracted its not what it says it should be. ie its zimage not a file with .tar after.
Suts
optus
I ended up calling optus and found that the upgrade had deleted the settings for the internet on 3g so for anyone upgrading on the optus network go to
settings
wireless & network
mobile networks
access point names, left hand menu button, add new APN
NAME optus internet
APN yesinternet
PROXY though to MMS on NOT SET
MCC 505
MNC 02
AUTHENTICATION TYPE pap
APN Type internet
Yes thats a standard problem with flashing a non standard rom probably with the wrong CSC for your area .
jje
After a unsuccessful flashing of Semaphore 1.0 kernel for Slim ICS, I lost my recovery access. I tried to flash an old 2.3.3 rom (XXJVH I think, official nordic firmware) with Odin, but it failed several times. Then I managed to flash an XXJVU (European value pack) rom, but phone couldn't recognize my SIM card. I tried to flash JVH again, and it failed again. Then I reflashed XXJVH, and now my SGS would recognize SIM card, but all the APN settings are gone, and I can connect to internet only with wifi. I'm planning to flash CWM to my phone and then Slim ICS again, but will the APN settings be restored? I also considered restoring a nandroid backup of my old, working XXJVH.
Which option should I do? Does nandroid backup restore my APN settings, or are they stored elsewhere?
Also, can the APN settings reappear after flashing Slim ICS or some another rom?
Your apns will usualy include in ics roms.
For jvu you can flash jvh csc. Or you can type in your apn manualy.
Sent from my GT-I9000 using Tapatalk 2
So, if I flash ICS, the APN settings can "mystically" reappear?
Just go to settings > wireless & networks > mobile networks > access point names then press menu button and add APN. If you don't know your APN settings just put to google your operator name and APN.
Thanks for advice for both of you! I flashed ICSSGS and APN settings were restored automatically. Case closed.
Hi I have the ATT Galaxy Tab Model SGH-i987 That I just flashed with Overcome 4.0.0 exactly per the instructions provided by Alterbridge86 here: http://forum.xda-developers.com/showthread.php?t=1881981 I checked and double checked each step before proceeding and even installing the "AT&T JK3 Modem.bin file in Odin as instructed.
Everything went smooth and everything seems to work including WiFi except, I have no AT&T data service at all. No Edge, no 3G, no H, nothing... :crying:
Thanks,
Tom
I also noticed that all my AT&T apps and widgets are gone even though I did a backup with Titaniun Backup as instructed.
well, if you backup, you need to restore.
But be aware that Overcome is GB based, your AT&T stuff is Froyo based.
You may not get it restored and working properly.
Now, do you have WiFi? As in not AT&T cellular. the 802.11g thing.
Can you make call and send sms?
what does it say under baseband in the phone info?
priyana said:
well, if you backup, you need to restore.
But be aware that Overcome is GB based, your AT&T stuff is Froyo based.
You may not get it restored and working properly.
Now, do you have WiFi? As in not AT&T cellular. the 802.11g thing.
Can you make call and send sms?
what does it say under baseband in the phone info?
Click to expand...
Click to collapse
Thanks for the reply... I restored what the overcome instructions told me to back up however, none of the AT&T apps or widgets where among them. My impression based on the instructions for the Overcome Flash was that my AT&T AT&T data plan would work. Out of the instructions I quote " The Overcome ROM/Kernel is intended for GSM-based Samsung GAlaxy Tabs Only! (GT-P1000/T-Mobile*/AT&T*/Telstra* Tabs Only) * Please use the appropriate modems when flashing!
Later it says to flash with the JK3 Modem.bin file which I did. Like I said, I followed the instructions exactly checking each step before proceeding. I had NO errors or hang ups in the installation and everything PASSED and is working fine except that I have no AT&T data service.
WiFi works on my home network. Here is the info requested:
Model Number now says: GT-P1000 before upgrade it was SGH-i987
Baseband Version is now: I9000UGK3 before upgrade it was I987UCK1
Kernel version is now: 2.6.357 Overcome-v4.0.0 #40 before upgrade it was 2.6.32.9 [email protected] #1
Build Number is now: Overcome 7 Series v4.1.0 before upgrade it was FROYO.UCJK1
This is the other info I have now:
Phone number: Same as before upgrade
Network: AT&T
Signal Strength: -92 dBm 9asu
Mobile Network Type: HSDPA
Service State: In Service
Roaming: Not Roaming
Mobile Network State: Disconnected
IMEI: Same as before Upgrade
IMEI SV: 05 this was 02 before upgrade
Network Mode is GSM/WCDMA
I also tried manually setting network operators. When searching two AT&T come up. When I select one of the two AT&T manually it says "your SIM does not allow a connection on this network." It registers to the other just fine however. When I "Select Automatically" It also seems to work.
I tried removing the SIM but all that does is want the Tab to go into initial reboot. when I reinserted the SIM and rebooted nothing had changed.
I can not make calls. An AT&T voice prompt comes up and says "The call you are trying to place is not allowed from this line."
I can also not send or receive SMS messages although I receive no errors. This however may be due to the fact that I previously called AT&T months ago and told them I did not want to receive SMS messages because I was getting all kinds of Spam messages every day and getting charged for them.
I am hoping that maybe phdeez can also chime in here since he says he has the Tab with AT&T. Here is my initial post to XDA that convinced me to update. http://forum.xda-developers.com/showthread.php?t=1982476
Thanks,
Tom
you can try these:
1) go to the modem thread in dev section
http://forum.xda-developers.com/showthread.php?t=1069727
first post has something called AT&T stock modem.
I am not sure if it is the same as Overcome JK3
Actually I would expect JK3 modem to have a "JK3" in the baseband, doesn't it?
Use CWM to flash that one from modem thread and see what the baseband said
(it better say I987UCK1 because it is stock...)
2. make sure you have AT&T APN correctly set.
about not able to make phone call, I think AT&T maintain a list of IMEI and know that you have a tablet. It is too bad that you can't make call, but the modem thing hopefully solve the 3G.
One note to you just as extra knowledge (not needed now), the CWM flashable modem only works for stock (so called BML partition) ROM, like Overcome.
When you move on to CM9 or CM10 (MTD partition rom), you only need to use root explorer to copy the modem.bin to /radio/modem.bin
priyana said:
you can try these:
1) go to the modem thread in dev section
http://forum.xda-developers.com/showthread.php?t=1069727
first post has something called AT&T stock modem.
I am not sure if it is the same as Overcome JK3
Actually I would expect JK3 modem to have a "JK3" in the baseband, doesn't it?
Use CWM to flash that one from modem thread and see what the baseband said
(it better say I987UCK1 because it is stock...)
2. make sure you have AT&T APN correctly set.
about not able to make phone call, I think AT&T maintain a list of IMEI and know that you have a tablet. It is too bad that you can't make call, but the modem thing hopefully solve the 3G.
One note to you just as extra knowledge (not needed now), the CWM flashable modem only works for stock (so called BML partition) ROM, like Overcome.
When you move on to CM9 or CM10 (MTD partition rom), you only need to use root explorer to copy the modem.bin to /radio/modem.bin
Click to expand...
Click to collapse
I agree with what priyana has stated above.
I believe ATT maintains a list of IMEIs to block calling, however there might be a workaround with a different SIM - calling did NOT work before the upgrade, right?
Possible Modem issue, however since you see networks, you're probably good
APN Settings are likely blocking internet
See here for APN settings for ATT link, however I would combine the settings into one APN since you're not using the phone function. So, the APN should look like:
Code:
Name: ATT
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: -
Password: -
Server: -
MMSC: http://mmsc.cingular.com/
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: -
APN Type: mms,supl,default,internet
APN Protocol: ipv4
I wish I could speak from experience on using my Tab with ATT Data (or with Overcome ROM), however as soon as I received it I disabled my plan and took the SIM out. I never actually ran data with ATT's network, and just recently attempted to use my ATT Tab on Tmo. For the longest time my Tab was a wifi-only Tab...
I am sooooo frustrated right now. I've tried several modems and checked and double checked the APN settings. I am beginning to wonder if maybe its not working because I no longer have the AT&T apps or widget? I don't know why they didn't get backup-ed and restored by Titanium Backup. I guess I just didn't have that option checked.
Where can I get the AT&T stock apps and widget?
Any additional help is appreciated...
Oh... Should I maybe try starting all over with the Overcome Flash from the beginning? I am so afraid of bricking my Tab.
Thanks,
Tom
is there at any stage you have baseband I987UCK1 in Overcome ?
keep that modem, and fix other things.
priyana said:
is there at any stage you have baseband I987UCK1 in Overcome ?
keep that modem, and fix other things.
Click to expand...
Click to collapse
I am back on baseband i987UCJK1... This is the original baseband that I had in Froyo and when everything was working and before the root and flash to Gingerbread... (beats head against wall)
post your internet APN here.
edit: and your AT&T plan name
edit2:
http://forums.att.com/t5/Android-Di...Samsung-Galaxy-Tab-for-Froyo-and/td-p/2801333
Name APN Broadband
APN Broadband
MCC 310
MNC 410
All other fields left blank.
or
Name AT&T
APN broadband
MCC 310
MNC 410
All other fields left blank.
priyana said:
post your internet APN here.
edit: and your AT&T plan name
edit2:
http://forums.att.com/t5/Android-Di...Samsung-Galaxy-Tab-for-Froyo-and/td-p/2801333
Name AT&T
APN broadband
MCC 310
MNC 410
All other fields left blank.
Click to expand...
Click to collapse
Ok... THANK YOU!!! THANK YOU!!! THANK YOU!!! :highfive: The above finally worked. I am using the stock AT&T Modem and on baseband ( i987UCJK1 ). Most importantly!!! Create a New APN... And fill out the APN just like it says in the quote by Priyana above and in the article. LEAVE EVERYTHING ELSE BLANK!!! No Proxy, no Port, No MMSC, No MMS info nothing. Working like a charm now.:laugh:
Now if I could only get the phone to work as a side benefit then that would be sweet... I didn't have it before in froyo so that would be new.
Thanks again guys and especially Priyana.
Tom
Hi i have an s3 LTE telstra i9305 and i flashed it with a few roms and now it wont connect to telstra network .
If i flash the stock rom does it flash the modem back to stock aswel
I get the little bars up the top and it actually finds testra in the network list but gets an error when i goto register on it
the error is something like this sim is not compatible on this network
as i type this im flashing stock rom so i will try it again and give the right error soon thanks
p.s does the stock rom flash bootloader and modem ???
IMEI
first 4 of my IMEI is 3547
hades302 said:
Hi i have an s3 LTE telstra i9305 and i flashed it with a few roms and now it wont connect to telstra network .
If i flash the stock rom does it flash the modem back to stock aswel
>>>>Flashes whatever modem is in the firmware .
the error is something like this sim is not compatible on this network
>> Change sim .
Suggest you manually add your networks APN settings and read the faqs and guides before flashing anything .
Click to expand...
Click to collapse
If its the original rom for my phone shouldnt the APN setting be already set and when i go into the settings to change them they are all none selectable all blanked out you can see the setting but cant change them.
APN - telstra.wap
MCC - 505
MNC - 01
APN type - default,supl
Protocol - IPv4
all other setting say NOT SET
worked it out my sim card has died for some reason