Hi,
I am using JVB 2.3.3 android version. However, when I try to install CWM or flash anything else I get this:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I found some information how it is possible to repair this problem on other phones, however none of them was for galaxy s. I am not experienced android user. And I am a little bit scared to use methods that were made for other phones. So maybe someone had similar problem to mines and know how to solve it?
That's because you have 3e recovery instead of 2e, which requires the package to be signed by Samsung. Go the development section and download CF root kernel. There's no other way around it. You have to get a custom kernel.
wenoxx said:
Hi,
I am using JVB 2.3.3 android version. However, when I try to install CWM or flash anything else I get this:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I found some information how it is possible to repair this problem on other phones, however none of them was for galaxy s. I am not experienced android user. And I am a little bit scared to use methods that were made for other phones. So maybe someone had similar problem to mines and know how to solve it?
Click to expand...
Click to collapse
This will do the trick, I had the same issue and this is how I got around it, someone was nice enough to point me to this so Im happy to share with someone else in need.
http://forum.xda-developers.com/showthread.php?p=10624454#post10624454
This last trick does not work for i9000 obviously is different from Captivate. Did not work for me.
the trick d'not
work for my galaxy S (firmware 2.3.3, version I9000BUJV3, kernel 2.6.35.7-I900BUJVA-CL220544 [email protected] #2)
twentyfour-fr said:
This last trick does not work for i9000 obviously is different from Captivate. Did not work for me.
Click to expand...
Click to collapse
andromonk said:
work for my galaxy S (firmware 2.3.3, version I9000BUJV3, kernel 2.6.35.7-I900BUJVA-CL220544 [email protected] #2)
Click to expand...
Click to collapse
Same here, on 2.3.3 it simply doesn't work, even that trick you posted. Galaxy s i9000
I'll thank everyone who helps me
same problem
Hey everyone,
I´m having the same problem and i´m unable to overcome this.
Can you help me?
I have the following firmware:
I9000XDJV1
2.35.7-I9000XXJW4-CL1043937 [email protected] #2
GINGERBREAD.XWJW5
I have to flash the kernel, is that it?
How can I do it and wich kernel version? I´ve done a upgrade with the CF-Root-XX_OXA_JW4.v4.4-CWM3RSF.zip
Thank you.
help on ClockworkMod Recovery - galaxy S i9000
Hello
Could you please help me with my galaxy s?
I'm trying to install ClockworkMod Recovery” and I get:
Finding update package…
Verifying update package…
E:Failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I have (rooted):
firmware ver : 2.3.6
base band I9000XXJVT
kernel: 2.6.35.7-I9000XWJW1-CL788890
build nr: GINGERBREAD.XWJW1
Thank you much
where i find the rsa or the samsung signature viewer any ideas?
Related
I am trying to install lagfix on froyo and force it. When I go into flash mode and apply the aip file i get the error message
E:signature verification failed
Installation aborted
Can anyone suggest any ideas
This is when trying to root the phone
BTW it worked fine on JM1
Any one help me???? Please
Samsung uses a different signature verification for froyo, so things that are intended for android 2.1 no longer work, i suggest the oneclick lag fix, it is available in the android market for free
Thats where I got if from, the market, and having this issue
you have to manually root the phone, and the process is different for 2.2
If you're running JPK, the root method is here
Thread moved to Q&A section
Will the one click root for Froyo work with the just released version of Froyo (IE Feb 24)?
The one click rooting tool I mean can be found here.
http://www.xda-developers.com/android/one-click-root-for-froyo-running-captivates-emerges/
The old one for Eclair doesn't work anymore and gives an e certificate error.
tnerb123 said:
Will the one click root for Froyo work with the just released version of Froyo (IE Feb 24)?
The one click rooting tool I mean can be found here.
http://www.xda-developers.com/android/one-click-root-for-froyo-running-captivates-emerges/
The old one for Eclair doesn't work anymore and gives an e certificate error.
Click to expand...
Click to collapse
it should work fine. just follow the instructions. i didnt see any real changes to the rooting method that was used in JI6....
just go with a custom rom, they will be faster than stock and without the ATT bloat anyway...and its rooted for you
I too am unable to root the O/S after updating to Official FroYo...
Following all procedures available to root leads to the following error -
E:signature verification failed
Installation aborted.
Looking for a way around this... Other than having to flash back to Eclair... I kind of want to give the Official Froyo a run.
Any ideas?
RaptorOne3 said:
I too am unable to root the O/S after updating to Official FroYo...
Following all procedures available to root leads to the following error -
E:signature verification failed
Installation aborted.
Looking for a way around this... Other than having to flash back to Eclair... I kind of want to give the Official Froyo a run.
Any ideas?
Click to expand...
Click to collapse
i guess you failed to follow the link to the proper one click?
http://forum.xda-developers.com/showthread.php?t=803682
your queations have been answered in the 2.2 threaf. Have a look there. You need to patch the recovery.
Sent from my SGH-I897 using XDA Premium App
Hi Guys,
I'm trying to get cyanogenmod jellybean onto my Rooted galaxy s I9000
I'm having some trouble
I've tried installing clock work mod recovery onto the phone but the It doesn't seem to be working I seem to still be getting the samsung stock recovery.
When I try to boot into recovery from the clockworkmod app I get the following message.
E:failed to verify whole-file signature
E:signature verification failed.
I've been told in the past that the problem is kernal related problem.
However I'm not sure what kernal would be suitable.
Could someone please give me some help/suggestions?
My phones specs are listed below, Thanks in advance.
Firmware version: 2.3.3
Baseband version: I9000XXJVO
Kernal version: 2.6.35.7-I9000XWJVH-CL184813 root @dell101 #2
Build number: GINGERBREAD.XWJVH
http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=13
http://hdtechvideo.com/community/index.php
http://www.cyanogenmod.com/devices/samsung-galaxy-s
checkout these guys good luck also totallydubbed on youtube hes a legend videos going back about a year or so
This is what i see during installation
Install /sdcard
Finding update package...
Opening update package...
Verifying update package...
Installing Update...
######################
PhilZ Touch Recovery
Full Touch CWM Based
+
Advanced Features
Phone n7000
######################
This package is for 'galaxynote.n7000.N7000.GT-N7000' devices: this is a 'GT-N7000B'.
E: Error in /tmp/sideload/package.zip
(Status 7)
I know my model is N7000B but i didn't get a PhilZ for the Same, what can i do?? plz Help
I Want to Update my Rom
Model : GT-N7000B
Android Version: 4.0.4
Baseband version : N7000BDVLR2
Build Number : IMM76D.DVLR4
Thanks In Advance
I think you are trying to install a temp recovery. Go to Philz kernel thread original development section and download a 4.0.4 kernel and try..
Similar issue
nokiamodeln91 said:
I think you are trying to install a temp recovery. Go to Philz kernel thread original development section and download a 4.0.4 kernel and try..
Click to expand...
Click to collapse
Im getting a similar error while installing philz_touch_6.07_.9-n7000.zip on my GT-N7000. The only difference is that it is not defining my device as anything. I mean instead of it saying that this device is GT-N7000B or something else it just show inverted commas and nothing else
To be precise this :
This package is for 'galaxynote.n7000.N7000.GT-N7000' devices: this is a ''.
E: Error in /tmp/sideload/package.zip
(Status 7)
WHat do i do? I'm flashing a custom rom for the first time cause im bored with touchwiz now. I followed steps mentioned on the omnirom website but couldn't install twrp as recommended by them. After much reading i found that philz works for GT-N7000. Also, as per omni recommendation i have also rooted my phone using Framaroot. Im not getting this procedure of installing a custom rom at all. Im completely new to this and would really appreciate if someone can help me install the latest 4.4.2 omnirom on my galaxy note n7000. Have i done something wrong?
deepesh_p said:
Im getting a similar error while installing philz_touch_6.07_.9-n7000.zip on my GT-N7000. The only difference is that it is not defining my device as anything. I mean instead of it saying that this device is GT-N7000B or something else it just show inverted commas and nothing else
To be precise this :
This package is for 'galaxynote.n7000.N7000.GT-N7000' devices: this is a ''.
E: Error in /tmp/sideload/package.zip
(Status 7)
WHat do i do? I'm flashing a custom rom for the first time cause im bored with touchwiz now. I followed steps mentioned on the omnirom website but couldn't install twrp as recommended by them. After much reading i found that philz works for GT-N7000. Also, as per omni recommendation i have also rooted my phone using Framaroot. Im not getting this procedure of installing a custom rom at all. Im completely new to this and would really appreciate if someone can help me install the latest 4.4.2 omnirom on my galaxy note n7000. Have i done something wrong?
Click to expand...
Click to collapse
I'm also getting this exact message, with just '' rather than any device name. Is there a line of code I need to change? I'm wanting to flash a new ROM and not getting anywhere. Pleas epoint me in the right direction guys.
use his kernel from here:
http://d-h.st/users/philz_touch/?fld_id=25295#files
vkkkr said:
This is what i see during installation
Install /sdcard
Finding update package...
Opening update package...
Verifying update package...
Installing Update...
######################
PhilZ Touch Recovery
Full Touch CWM Based
+
Advanced Features
Phone n7000
######################
This package is for 'galaxynote.n7000.N7000.GT-N7000' devices: this is a 'GT-N7000B'.
E: Error in /tmp/sideload/package.zip
(Status 7)
I know my model is N7000B but i didn't get a PhilZ for the Same, what can i do?? plz Help
I Want to Update my Rom
Model : GT-N7000B
Android Version: 4.0.4
Baseband version : N7000BDVLR2
Build Number : IMM76D.DVLR4
Thanks In Advance
Click to expand...
Click to collapse
OMG！！！how can u get a N7000 Philz safe kernel for ur N7000B ？
Is a different kernel ！ R u trying to brick ur phone ？
If i'm not wrong N7000B is LTE phone ！
wish u good luck ！
workyticket said:
I'm also getting this exact message, with just '' rather than any device name. Is there a line of code I need to change? I'm wanting to flash a new ROM and not getting anywhere. Pleas epoint me in the right direction guys.
Click to expand...
Click to collapse
I got the same error. My device type is not mentioned.
It just say ## "This package is for "galaxynote,n7000,N7000,GT-N7000" devices; this is a "". ##
Now I am still on Stock ROM, wanting to change to CM11
(Found this treath by googling, but no answer yet.)
Hi
I'm trying to update from 2.3.6 (Gingerbread.nejw3) to C-RoM-KK-v6.3.
I try to apply the update and I get "failed to verify whole-file signature" from googling this seems to be something to do with the kernel version.
2.6.35.7-i9000nejw3-cl1092934 [email protected]#2
Anyone have any step by step instructions on how I can get upto the right level so I can apply this update, there are so many threads and fragmented bits of information I'm struggling to find out exactly what to download from where and what order to do it in as I'd like to avoid bricking it.
Thanks
eqkosch said:
Hi
I'm trying to update from 2.3.6 (Gingerbread.nejw3) to C-RoM-KK-v6.3.
I try to apply the update and I get "failed to verify whole-file signature" from googling this seems to be something to do with the kernel version.
2.6.35.7-i9000nejw3-cl1092934 [email protected]#2
Anyone have any step by step instructions on how I can get upto the right level so I can apply this update, there are so many threads and fragmented bits of information I'm struggling to find out exactly what to download from where and what order to do it in as I'd like to avoid bricking it.
Thanks
Click to expand...
Click to collapse
If you want to upgrade to 4.4 install XXJVU (2.3.6) first and then install CM9, CM10 and finally C-RoM.