Database Develop

problem updating froyo 2.2

I have downloaded the file and rename it to update.zip
The device couldn't verify the update and "Installation aborted", can anyone help?

More info needed.

same error
Hi Bro ,
yesterday i bought my new Nexus one from Google , but its on 2.1 Rom , and i guess its NON Rooted as in
NON- Rooted Nexus One , 2.1 , build EPF21B ?
Firmware version says " 2.1-update1
am starving for 2.2 Froyo , but since ur Trackball fills out the need for now , still not able to use it ,as i've tryed to update the 2.1 to 2.2 no help yet
can u atleast help me loading this TRACKBALL feature working , with proper instructions as what i tryed with you zip , i put it on my 4 GB SD which was almost filled around 3.1 GB already but i paste it on root , dint rename ur file , and tryed to update it in Recovery but it says the same error that i faced when i tryed to upgrade to Froyo ,
E;Can't open /cache/recovery/command
--Install from sdcard...
Finding update package...
Openeing update package...
Verifying update package...
E:Signature verification failed
Installation aborted.
Please help me , would appreciate this .

stonner said:
Hi Bro ,
yesterday i bought my new Nexus one from Google , but its on 2.1 Rom , and i guess its NON Rooted as in
NON- Rooted Nexus One , 2.1 , build EPF21B ?
Firmware version says " 2.1-update1
am starving for 2.2 Froyo , but since ur Trackball fills out the need for now , still not able to use it ,as i've tryed to update the 2.1 to 2.2 no help yet
can u atleast help me loading this TRACKBALL feature working , with proper instructions as what i tryed with you zip , i put it on my 4 GB SD which was almost filled around 3.1 GB already but i paste it on root , dint rename ur file , and tryed to update it in Recovery but it says the same error that i faced when i tryed to upgrade to Froyo ,
E;Can't open /cache/recovery/command
--Install from sdcard...
Finding update package...
Openeing update package...
Verifying update package...
E:Signature verification failed
Installation aborted.
Please help me , would appreciate this .
Click to expand...
Click to collapse
Looks like you have the AT&T N1, which you will need to unlock the boot loader and put a custom recovery on to get it updated to the current 2.2 out there now.
The current 2.2 that has been released is for the T-Mobile phone only (from Stock that is) which is ERE27.

aaronyan116 said:
I have downloaded the file and rename it to update.zip
The device couldn't verify the update and "Installation aborted", can anyone help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=6823272&postcount=2

[Q] failed to verify whole-file signature

Hi,
I am using JVB 2.3.3 android version. However, when I try to install CWM or flash anything else I get this:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I found some information how it is possible to repair this problem on other phones, however none of them was for galaxy s. I am not experienced android user. And I am a little bit scared to use methods that were made for other phones. So maybe someone had similar problem to mines and know how to solve it?

That's because you have 3e recovery instead of 2e, which requires the package to be signed by Samsung. Go the development section and download CF root kernel. There's no other way around it. You have to get a custom kernel.

wenoxx said:
Hi,
I am using JVB 2.3.3 android version. However, when I try to install CWM or flash anything else I get this:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I found some information how it is possible to repair this problem on other phones, however none of them was for galaxy s. I am not experienced android user. And I am a little bit scared to use methods that were made for other phones. So maybe someone had similar problem to mines and know how to solve it?
Click to expand...
Click to collapse
This will do the trick, I had the same issue and this is how I got around it, someone was nice enough to point me to this so Im happy to share with someone else in need.
http://forum.xda-developers.com/showthread.php?p=10624454#post10624454

This last trick does not work for i9000 obviously is different from Captivate. Did not work for me.

the trick d'not
work for my galaxy S (firmware 2.3.3, version I9000BUJV3, kernel 2.6.35.7-I900BUJVA-CL220544 [email protected] #2)

twentyfour-fr said:
This last trick does not work for i9000 obviously is different from Captivate. Did not work for me.
Click to expand...
Click to collapse
andromonk said:
work for my galaxy S (firmware 2.3.3, version I9000BUJV3, kernel 2.6.35.7-I900BUJVA-CL220544 [email protected] #2)
Click to expand...
Click to collapse
Same here, on 2.3.3 it simply doesn't work, even that trick you posted. Galaxy s i9000

I'll thank everyone who helps me

same problem
Hey everyone,
I´m having the same problem and i´m unable to overcome this.
Can you help me?
I have the following firmware:
I9000XDJV1
2.35.7-I9000XXJW4-CL1043937 [email protected] #2
GINGERBREAD.XWJW5
I have to flash the kernel, is that it?
How can I do it and wich kernel version? I´ve done a upgrade with the CF-Root-XX_OXA_JW4.v4.4-CWM3RSF.zip
Thank you.

help on ClockworkMod Recovery - galaxy S i9000
Hello
Could you please help me with my galaxy s?
I'm trying to install ClockworkMod Recovery” and I get:
Finding update package…
Verifying update package…
E:Failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I have (rooted):
firmware ver : 2.3.6
base band I9000XXJVT
kernel: 2.6.35.7-I9000XWJW1-CL788890
build nr: GINGERBREAD.XWJW1
Thank you much

where i find the rsa or the samsung signature viewer any ideas?

[Q] Can't update to official 2.3.4

Hi, this problem really affected be for one months, I don't know can I asking such question in here but I can't find anybody to help me.
When I accepted the OTA update it rebooted the phone and installation started but soon i was getting a triangle with exclamation sign in it sign on my screen. I tried serval time and the results are the same.
Then, I decided to update my N1 to 2.3.4 maunally. I've follow the procedure but some messages have been shown.
Opening update package...
Verifying update package...
Installing update...
Verifying current system
assert failed: apply_patch_check(“/system/fonts/DroidSansFallback.ttf”, …..)
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
P.s. My Build Number: GRI40 and the N1 are 100% stock rom
what should I do now?
Thanks all!

Follow the unroot/restore guide in the wiki...

Dear danger-rat
Thanks for your reply, but i never rooted my N1 before

Doesn't matter. The guide just does a clean install of the stock ROM, which is going to get you back to a working phone...

danger-rat said:
Doesn't matter. The guide just does a clean install of the stock ROM, which is going to get you back to a working phone...
Click to expand...
Click to collapse
Is it doesn't matter restore stock Froyo ROM if my N1 version is 2.3.3 because i just find out FRG83 ROM from wiki
Is there any methods to reinstall my 2.3.3 ROM?

Ya just do what he said with the 2.2.1 and update back the 2.3.3.

Basically, once you get the stock Froyo on your phone, the updates will follow shortly afterwards...

Trying to upgrade Samsung I9001 without much luck

Hello Form
I have been trying to upgrade my Samsung I9001 without much luck after searching this forum and Google
Below is the following info for my Phone.
firmware 2.3.5
BandVersion I9001XXKPF
Kernal 2.6.35.7-perf [email protected]#1
Build Number GINGERBREAD.XXKPP
pda: i9001xxkpp
phone i9001xxkpf
csc i9001vitkp2
Via this form I have been able to gain root access to my phone and have been trying to install one of the latest roms from this forum
ICS333-2.0.1-signed but I keep getting an error message "Error in /cache/update.zip (status 2) installation Aborted"
So I have read further on this form and with google and people write that I need to install a Value pack to upgrade the firmware 2.3.6 using Odin and setting the phone in Download mode, this I have tried and after 20 mins and changing diffrent USB ports didnt seem to work.
I then bought the Pro version of ROM Manager where you can download the latest roms "Darkys_v9.5" this downloads but when I try to install I get the same error as above "Error in /cache/update.zip (status 2)".
So after a couple of days searching and reading im not any further, so tought that I would ask the more experienced users of this forum for help
Is is possible to upgrade my phone to the Latest Android Version and what software scripts do I need for my phone version
Thanks in advance for any help
Alpah981

alpha981 said:
firmware 2.3.5
BandVersion I9001XXKPF
Kernal 2.6.35.7-perf [email protected]#1
Build Number GINGERBREAD.XXKPP
pda: i9001xxkpp
phone i9001xxkpf
csc i9001vitkp2
Click to expand...
Click to collapse
First thing you should do is use the WIKI for i9001 http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 , IF you try to use i9000, you will have only problems

xsenman said:
First thing you should do is use the WIKI for i9001 http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 , IF you try to use i9000, you will have only problems
Click to expand...
Click to collapse
Hello xsenman, with your help and link I managed to update my Phone now to
firmware 2.3.6, I9001XXKPL , GINGERBREAD.XXKQG using Odin and the ValuePack
So I need just to find the correct ROM for my Phone to boost me to the Latest Android Version
Alpha981

alpha981 said:
Hello xsenman, with your help and link I managed to update my Phone now to
firmware 2.3.6, I9001XXKPL , GINGERBREAD.XXKQG using Odin and the ValuePack
So I need just to find the correct ROM for my Phone to boost me to the Latest Android Version
Alpha981
Click to expand...
Click to collapse
same link has links to custom ROMS but first you need a CWM recovery, you can find there or on my Android collections link below, use i9001 CWM 6.0 recovery

xsenman said:
same link has links to custom ROMS but first you need a CWM recovery, you can find there or on my Android collections link below, use i9001 CWM 6.0 recovery
Click to expand...
Click to collapse
Hello Xsenman, thanks for your replay and like to your goodies page
I have done what you said and and added a CWM 6.0 Recovery via Odin and when I enter the recover mode it says CWM_based Recovery v6.0.1.0 so this is working, I then tried to install the "Darky Rom" or the once from this forum ICC333-2.01,
But get the message e: error in /sdcard/ICS333-2.0.1-signed.zip (Status 7) inall aborted
or from darky Amend scripting (update-script) is nolonger supported was deprecated by google swich to Edify scripting (update-script and update-binary) to create working update zip pakages. install aborted
So im a little lost on waht to do now.
Alpha 981

alpha981 said:
So im a little lost on waht to do now. Alpha 981
Click to expand...
Click to collapse
I think you are trying to Flash an i9000 Rom on a i9001, it won't work, use only i9001 ROMS.. http://forum.xda-developers.com/showthread.php?t=1409605, like I said earlier you need to use the WIKI

xsenman said:
I think you are trying to Flash an i9000 Rom on a i9001, it won't work, use only i9001 ROMS.. http://forum.xda-developers.com/showthread.php?t=1409605, like I said earlier you need to use the WIKI
Click to expand...
Click to collapse
Hello Xsenman,
Thanks for your help and time, I think the biggest problem that I had was that I was looking for information for the Samsung S1 and reading stuff
for the i9000, anyway with your kind help and Patience you managed to guide me in the right direction.
I have now managed to upgrade my phone to the Android 4.04 from Gingerbread 2.3.6
So thank you
Alpha981

update from 2.3.6

Hi
I'm trying to update from 2.3.6 (Gingerbread.nejw3) to C-RoM-KK-v6.3.
I try to apply the update and I get "failed to verify whole-file signature" from googling this seems to be something to do with the kernel version.
2.6.35.7-i9000nejw3-cl1092934 [email protected]#2
Anyone have any step by step instructions on how I can get upto the right level so I can apply this update, there are so many threads and fragmented bits of information I'm struggling to find out exactly what to download from where and what order to do it in as I'd like to avoid bricking it.
Thanks

eqkosch said:
Hi
I'm trying to update from 2.3.6 (Gingerbread.nejw3) to C-RoM-KK-v6.3.
I try to apply the update and I get "failed to verify whole-file signature" from googling this seems to be something to do with the kernel version.
2.6.35.7-i9000nejw3-cl1092934 [email protected]#2
Anyone have any step by step instructions on how I can get upto the right level so I can apply this update, there are so many threads and fragmented bits of information I'm struggling to find out exactly what to download from where and what order to do it in as I'd like to avoid bricking it.
Thanks
Click to expand...
Click to collapse
If you want to upgrade to 4.4 install XXJVU (2.3.6) first and then install CM9, CM10 and finally C-RoM.