Problem with screen orientation - Captivate Q&A, Help & Troubleshooting

Help me please! I can not solve the problem with the orientation of the screen on my Cappy. The screen is always in landscape mode.
I'm flashing different firmware (stock 2.2, darky 9,5 darky 10rc5, GR-11 and other), flasing different kernel-nothing helps correct orientation screen ((
on these ROM I get only landscape mode anywhere (setting, apps ....)
The screen orientation is only supported on 2.1 stock one click.
How can I fix it?

are you getting the roms and kernels in the captivate area or the i9000 area?
i9000 kernels that ARE NOT reoriented do that.

I'm get kernel and ROM in the Captivate area.

Have you tried calibrating on your settings > display? And when you flash back to stock did you do a master clear?
Sent from my SAMSUNG-SGH-I897 using XDA App

Yes, I'm calibrate sensor settings > display and calibrate with terminal > libsensor_yamaha.... Nothing has helps...
I"m have 2 Captivate, may replace system files from one to another?
Or possible to disable both landscape mode through root explore?

pinoyplaya said:
And when you flash back to stock did you do a master clear?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yes, i did reset to default.

A now my cappy brick.... (!-comp), but DM vol- and Power On is work!
After all I flashinggg ... wanted to do a rollback to 2.3.3 JVK on Darky 9.2 through oDin ... Restart PC 15 times before the body caught in one ... After this, the mapping Pit'a continue - setup connection. Do not Target!!! He sat and waited, doing nothing disabled phone from the PC. Try to include: burning the body-triangle-Comp.
In download mode enters the phone at times only two or so. (Thanks Bout 2.3.3), while trying to enter the recovery comes out bloody triangle. Already tried 20 times to connect the body to the computer does not see one phone.
Reinstall Windows with Seven on XP, tried it 10 times, not once does not see one's phone. Take in hand the second Captivate, load into dm, ODin immediately sees it and picks up ...
Che for the crap guys? Within the body of Che is dead or what? I must say, when he sat on 2.3.3 when you connect the body to a computer almost always been a purely charge, a mount did not jump out (check mark in the development of standing).
Right now I do not know even in which direction to dig! Possible that the bottles flew all the same? Or the body would not be going down in DM?
I tried right now, the resistor body in the DM does not to go why?

Umm ... What?

ilyxa said:
A now my cappy brick.... (!-comp), but DM vol- and Power On is work!
After all I flashinggg ... wanted to do a rollback to 2.3.3 JVK on Darky 9.2 through oDin ... Restart PC 15 times before the body caught in one ... After this, the mapping Pit'a continue - setup connection. Do not Target!!! He sat and waited, doing nothing disabled phone from the PC. Try to include: burning the body-triangle-Comp.
In download mode enters the phone at times only two or so. (Thanks Bout 2.3.3), while trying to enter the recovery comes out bloody triangle. Already tried 20 times to connect the body to the computer does not see one phone.
Reinstall Windows with Seven on XP, tried it 10 times, not once does not see one's phone. Take in hand the second Captivate, load into dm, ODin immediately sees it and picks up ...
Che for the crap guys? Within the body of Che is dead or what? I must say, when he sat on 2.3.3 when you connect the body to a computer almost always been a purely charge, a mount did not jump out (check mark in the development of standing).
Right now I do not know even in which direction to dig! Possible that the bottles flew all the same? Or the body would not be going down in DM?
I tried right now, the resistor body in the DM does not to go why?
Click to expand...
Click to collapse
Umm, what?

Related

unsuccesfull vibrant flashing on captivate

hello have flashed virant android 2.1 russian on the captivate due to mistake after that volume button and screen rotation problems i had. i was recomended to flash captivate kernel - i donloaded it and flashed it with mistake - i think i flashed in in wrong place ( i do not remember if i chose PDA, CSC, or PHONE) after that i have a big problem i downloaded one clock odin make phone into download mode by pressinf 2vol buttons, inserting usb cable, than the battery - because other ays i cant enter download mode in odin one clock com4 recognizes i pusg start button but nothing after @DO NOT TURN OFF [email protected] notice is done phone still with the yellow android man in triangle and nothing happens, please help me to solve it i searched this captivate forum for half of a day but no answed found my phone is brick for now and i need a phoen for my work
is there any wariant for reflashing it?
by the way i tried to reflash it by odin vith the vibrant firmware it flashed but on first startup screen gone with different dots on it ( like bad tv signal on television) than it flashed and started but still with that problems can i go back to any working captivate firmware? and how? thanks
maxxis said:
hello have flashed virant android 2.1 russian on the captivate due to mistake after that volume button and screen rotation problems i had. i was recomended to flash captivate kernel - i donloaded it and flashed it with mistake - i think i flashed in in wrong place ( i do not remember if i chose PDA, CSC, or PHONE) after that i have a big problem i downloaded one clock odin make phone into download mode by pressinf 2vol buttons, inserting usb cable, than the battery - because other ays i cant enter download mode in odin one clock com4 recognizes i pusg start button but nothing after @DO NOT TURN OFF [email protected] notice is done phone still with the yellow android man in triangle and nothing happens, please help me to solve it i searched this captivate forum for half of a day but no answed found my phone is brick for now and i need a phoen for my work
is there any wariant for reflashing it?
by the way i tried to reflash it by odin vith the vibrant firmware it flashed but on first startup screen gone with different dots on it ( like bad tv signal on television) than it flashed and started but still with that problems can i go back to any working captivate firmware? and how? thanks
Click to expand...
Click to collapse
Hello maxxis.
I actually run in to this all of the time. Odin *never* works the first time for me. It basically hangs and I have to screw with unplugging and plugging in my phone.
Do not take this as advice, this is what I have done and it works on my phone:
0) Make sure the 3 button combo gets you in to download mode. If not, stop, find a 3 button fix and make sure it works or make a jig: http://forum.xda-developers.com/showthread.php?t=841512
1) Start Odin. Wait for it to get ready.
2) Put your phone in download mode
3) Plug in your phone to a USB cable connected to the BACK of your MOTHERBOARD - no add-in cards, hubs, front ports or any other nonsense.
4) Try to flash with Odin. If it hangs, remove your phone, reboot and put back in download mode and try again. Do not unplug it if it is doing anything.
This usually works on my second or third try. Good luck!
You need to do a master clear. Or format the internel SD. Then flash vibrant rom.
Or try his post lol. I was too slow i guess
but i have captivate if i flash vibrant rom again it will not work correctly

Frustration at it's peak.

Hi there guys, That's it .
After reaching my highest limit of searching / installing / removing , z4root , super onclick, which btw none work, I am on the edge, basically , loosing my mind, and all I would like to do is just root my phone and have it working properlly and faster.
Now there are so many old root methods as the one I tryed Does any of you guys can help me out and explain how do I root my Samsung Galaxy S I-9000, with froyo 2.2 firmware ?
Thank you Omri.
what exact firmware,
i used JL2 and super one click worked for me.
try all of them.
Gets stuck on " Waiting for Device "
and i already unplugged the phone a couple of times with usb debugging on/off , any chance that im doing somthing wrong?
flash speedmod kernel.. or cfroot kernel
Can you see phone from the PC?
It sounds like the Odin method of flashing a custom kernel is not an option (if not try that - lots of info in the kernel posts)?
If your computer is not recognizing the phone try remove and reinstall drivers and kies and then also clean out the port on the phone with alcohol (and try another usb cable if you have one).
That my two bits. I tried in vain to root from the phone alone with 2.2 but finally got odin working by cleaning the port and now the possibilities are endless.
What exactly is this "Flashing / Kernel" options exactly , because the computer recognizes the USB just fine. ??
See here
http://forum.xda-developers.com/showthread.php?t=822756
This is for speedmod (if you need other options go to the stickies in the development section and look for the kernel list near the bottom of the stickies).
Follow the procedure for Odin installation. You will need to ensure you can go into download mode (Vol Down, home and power buttons to see - it should show android with a shovel in yellow - you can pull the battery to stop it if just checking but don't touch anything while Odin is working). If you cannot get 3 button download working, look for that fix in the forums too. I did not have that issue so I can't point you in the right direction there.
I think hardcore's page (author of the rom) has a link to an Odin guide. But its worth getting to know a bit as it will save your bacon if you need to get back to stock for warrenty.
Once you have this rom you'll be rooted and have clockwork Mod which allows flashing from the phone if you like (most custom roms are based on CWM installation). This is what I did once I got mine back from warrenty with 2.2 and then I flashed Darky's rom keeping the stock modem.
juvenileomri said:
Gets stuck on " Waiting for Device "
and i already unplugged the phone a couple of times with usb debugging on/off , any chance that im doing somthing wrong?
Click to expand...
Click to collapse
If you are stuck at "waiting for device"
do not exit Super One Click
1. pull out the usb from the phone,
2. turn off by pulling out the battery
3. put the battery back, turn on & plug in the USB

[Q] Phone, Exclamation Triangle, PC - No Download mode

I'm really sorry, I searched for solutions but didnt found one that fits my problem.
I'm a total newbie and ****ed up my phone in many ways. I started trying to install something it wasnt suposed to work on my phone (rom destinated to 9000 and stuff). I have a Samsung Galaxy S GT-I9000b (sold to latin amarica) and came from factory with android 2.2.
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Before I try any further I'd like your advices as how to procede regarding my 9000b. Pulling the battery out, putting it in again and holding either vol down or both volumes and either pluging the phone on usb or pressing power allways gives me the same result, the screen with phone exclamation triangle and pc.
So, before I buy a jig cable on ebay that will probably take 3 weeks to get here (Brasil) is there anything else I can try?
Please help me, I'm desperate and I dont want to take it to assistence, it would cost me much money and ruin all my courage in trying to use Roms.
Thanks alot and sorry for the bad english.
so did you have the 3 button combination before this happened ??
have you tried to charge the phone whilst powered off, then when the phone gets hot, try download mode then ? sometimes this works, as heat can help download mode work.
another thing that has worked for SOME people, is leaving the battery out for 10mins, doing the 3 button combo, and whilst holding the 3 buttons, insert the battery.
you could try these and see what happens,
And 3 weeks delivery for the JIG is a long time, couldnt you make one in less that 3 weeks.
If you can't get into download mode, you are screwed until you get your hands on a jig, simple as that. Just wait. Patience is a virtue.
Thanks in advance for the quick reply guys, I ordered the jig, estimated 20 days, usualy it takes the same amount from the central postal ofice to my home since they allways restrict packages from hong kong. I'm considering making one but I'm a total denial in eletronics.
I was able to get to download mode before this problem yes. I would just hold down vol and center key and then power. Now even when I plug it in to charge I get the screen with the exclamation.
Any more sugestions?
no other suggestions other than whats listed above
looks like you will have to wait for the JIG to arrive.
Loner-phone here you come lol
Then I have a couple of questions.
1) Since I plut it in directly on the power and still recive the same screen is the phone still charging? Or once the battery is over I'm ****ed up twice?
2) Is there any chance that the jig wont work or I in some way ****ed up my I-9000b permanently?
3) After I make/get a jig how should I procede? I heard about one-click odin, but apears that its for another model of phone, and since I got on all this trouble exactly for trying to do things to my phone that were suposed to be only for another model, I'm kind of lost.
Inputs?
Thank you all for already awnsering my questions.
1) the system is corrupted so the charging indicator will be too - thus leading to Phone ! PC image - this is the only image the phone can now produce
2) The 'JIG' has a 100% success rate - providing that the motherboard is not fried - which it isnt as it still shows an image
3) the jig is just a modified USB, just plug it into the phone whilst powered off and download mode will appear, and then you just attach your genuine USB cable and flash stock ROM thru ODIN.
azzledazzle Thank you very much for your patience, but since I`m a total newbie to all this, some of your awnsers I didnt understood fully, do you care explain me better?
Regarding question 1) The power indicator is corrupted, ok. But this means if my battery die out of usage it wont charge again or just that the indicator wont show that is charging but the battery actualy is charging?
and for question 3) Is ther any tutorial directed to I-9000 on how to use odin to flash a stock ROM ? like baby steps? After all that I'm even afraid to turn the phone on, so I would like to know exactly what to do. I`m cosindering asking someone with technical skills to help me on a home made jig.
oh im sorry, i get carried away sometimes.
1) i assume the battery will be charging yes. only the phone will not be able to show this due to the corruption.
2) when you have made / bought a JIG (link below) you ideally want to flash a Stock ROM, you can get this from samfirmware (link below) and also on this site is a tutorial on how to use ODIN, its fairly easy if you just read the instructions provided.
JIG: http://forum.xda-developers.com/showthread.php?t=819551&page=3
Firmwares : www.samfirmware.com
ODIN download and guide : http://forum.xda-developers.com/showthread.php?t=846913
Its a miracle, somehow I managed to get into download mode. But I'm still a bit insecure
Here is the deal, I dowloaded a .tar file that alledgedly from my carrier and for my country. The tar is named JPA_JP3_JPA.
Inside the file there are cache.rfs factoryfs.rfs modem.bin param.lfs zimage
But what should I put where on ODIN if I only have PIT PDA PHONE and CSC?
And how can I discover if I should use pit 512 or 803?
Should I consider a master clear setting?
the file you downloaded is a full firmware compressed into 1 .tar file.
so in odin load the .tar file into PDA section and THATS IT !!
DO NOT USE PIT WITH THIS FILE.
press start and enjoy
PS do a factory reset after the flash
vongikking said:
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Click to expand...
Click to collapse
Hello all!
I've got my hands on a GT-I9000 today.
It's got 2.3.3 Android on it.
Wanting to install CM7, I was first of all trying to root it.
I'm on Mac OS X 10.6.8, thus I downloaded heimdall-frontend and the "Hardcore's SpeedMod kernel with ClockworkMod Recovery".
When I put my phone into DL Mode and connect it to my Mac, I can't write the image to it.
Heimdall is failing with "Failed to receive device info response!"
What do you ppl suggest me to do now?
Thanks,
F.
Try to flash with Windows!
Sent from hell to take your soul
Lunchbox115 said:
Try to flash with Windows!
Sent from hell to take your soul
Click to expand...
Click to collapse
Indeed I now managed to get Windows XP PC.
one trouble still remains: after rooting the device remains in an infinite reboot loop!!!
It only stops when WiFi is disabled.
Any help bout this?
Or at least any means to get back to a factory ROM?
I got 2.3.3 before flashing...
Thanks!
Try to flash the nightly again, should solve the bootloop-issue.
Or you can wipe cache/dalvik cache, this helped me too.
Lunchbox115 said:
Try to flash the nightly again, should solve the bootloop-issue.
Click to expand...
Click to collapse
Which nightly do you intend me to re-flash?
Or you can wipe cache/dalvik cache, this helped me too.
Click to expand...
Click to collapse
How do I achieve these two things?
Thanks,
F.
Just take the latest nightly. To wipe the cache/dalvik cache you have to boot into recovery (hold volume UP + home button + power button.
Sent from hell to take your soul

[Q] Help! I don't know what I did to my phone! Can anybody help me?

I've been browsing for a while all over google and this site and still can't find anything that can help me so I'm asking.
I'm a basic Captivate user with no experience with flashing and rooting, but I saw Serendipity7 and thought the instructions were simple enough to follow on the weebly site. I downloaded the ROM files and the Installation files and extracted them. I followed the instructions perfectly by installing the drivers for my phone, opening Odin3 1.7, selecting the PDA, PHONE, CSC and PIT files then put my phone in download mode. I waited for the ID:COM to pop up then hit start. The blue bar on my phone and the one in Odin started working for about 30 seconds to a minute, not even the first box was done, then my phones screen turned straight blue, and Odin3 said it failed. The popup in the corner of the computer screen then said that my phone is no recognized for some reason.
Now my phone opens to the boot screen that says
"GALAXY S
gt-i9000
SAMSUNG"
and it just sits there. I can't get into download mode, and when I plug it to charge the screen with the battery level freezes and sits there.
Can somebody help me? I am a serious noob here that assumed simple directions were easy to follow (who knew they weren't?).
Thanks a million
Looks like Odin failed(again) you need to try to get into download mode again. Might need a jig.don't ask me about the jig tho cause i never had to use one. And I got mine when it came out.
Sent from my SGH-I897 using XDA Premium App
That happened to me once after flashing Firefly. Because we had a postal strike at the time I couldn't order one but I followed this guide and made my own and it worked perfectly. http://forum.xda-developers.com/showthread.php?t=819551
Yea, just try to reflash. There are 3 ways to get into download mode again. See this post. Number 3 always worked for me the best.
http://forum.xda-developers.com/showthread.php?t=819105
If you keep having problems with Odin, try Hemidell.
http://forum.xda-developers.com/showthread.php?t=1191094
You have I9000 bootloaders pull the battery reinsert and download mode should be volume down and power no usb cable insertion needed...
Yea you're definitely gonna be able to fix that quickly. Redo flash get into download mode either holding down volume down and inserting usb or hold down and hit power.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
Were the GB bootloaders even installed?
Sent from my GT-I9000 using XDA App
Thanks everyone who helped out, one thing tho...
None of the key combos are working for me so I'm just gonna us the jig fix to get into download. I know I need to use a 300k ohm resistor but does it matter if I use a 1%, 2% or a 5% resistor?
Thanks again
^ I've used 1/4 watt 5% tolerance with success.

[Q] Phone Exclamation Point Computer

Got stuck here working with a friend's captivate. We were in the process of cobbling together a jig when we notices that Odin seemed to recognize the phone whenever it was at the P!C screen.
The jig wasn't working out (resistors were 5% weaker than nominal), so we just gave Odin the go ahead at the P!C screen. To our surprise, a progress bar popped up on the phone and Odin successfully flashed the stock kernel back on.
So my question is, is the P!C screen just another face for download mode? Do you really need to jig from P!C to DL mode, or are you already there?
Not 100% of the time, but most of the time yes.
studacris said:
Not 100% of the time, but most of the time yes.
Click to expand...
Click to collapse
Cool, that makes life easier. When it isn't, does Odin not pick it up? Or does it show but fail to flash? Just trying to get an idea of how these things act when they're pseudo-bricked. I'm coming from Droid X land where 2nd-init and SBF solve everything.
Odin will only find the phone if it can get into download mode. (Usually vol up + vol down > plug in cable)
Not true, Odin shows a com port when booted into Android and in recovery. But will only succeed if download mode protocol is initiated on the phone.
studacris said:
Not true, Odin shows a com port when booted into Android and in recovery. But will only succeed if download mode protocol is initiated on the phone.
Click to expand...
Click to collapse
And to further add clarity, it's only the phone-!-computer screen that says "Hardware Upgrade Failure" (or something like that) that doubles as download mode. Coincidentally, that is only found in Gingerbread bootloaders. Happy Flashing
"Firmware upgrade failed" and even that's not completely true...if the flash you're attempting fails before the image for download mode is rewritten, then when download mode is initiated there is nothing to call on but that "flash failed screen" regardless of bootloaders.
That happened to me on my sisters captivate once...with eclair boots.
studacris said:
"Firmware upgrade failed" and even that's not completely true...if the flash you're attempting fails before the image for download mode is rewritten, then when download mode is initiated there is nothing to call on but that "flash failed screen" regardless of bootloaders.
That happened to me on my sisters captivate once...with eclair boots.
Click to expand...
Click to collapse
Weird. So, that would explain our situation. The flash failed while it was trying to negotiate the connection with the phone (or something worded like that, one of the first steps). So this jig is for real huh... Nothing like that in DROIDX land. Now that we've got it built right (no multimeter at the time, 301.6k ohms now) can we test it without altering anything? In other words, if we initiate download mode with the jig does any other kind of hard reset happen? NAND wipe or something like that? Or can we jig in to download mode to test the jig, then battery pull and reboot normally? (without plugging it in to a computer obviously - just a dry run)
Yeah, forcing dl mode shouldn't hurt anything. How do you think they test the ones that they make?
And you don't even need to yank the battery..just hold all 3 buttons and it'll reboot, if you hold them slightly too long it'll boot into recovery, but you can reboot it from there no big deal
Nice, thanks for the tip. I'll test it out tomorrow and see if my handiwork paid off. These unlocked bootloaders are fun! I do love my droid x but maybe the Verizon Galaxy S (fascinate?) would have been a good pick too.
Tangent: my friend is now up and running with the Corn KK4 7.06 under the stock ROM, got his root back. Next step, rom land.
ive Odined from the Exclamation point screen a couple of times
phone still running amazing
jayRokk said:
ive Odined from the Exclamation point screen a couple of times
phone still running amazing
Click to expand...
Click to collapse
Me too!
I'm glad to hear you got your phone back up and running. This phone is pretty hard to kill for good, and with the unbrickable mod its impossible!
Sent from my SGH-I897 using xda premium

Categories

Resources