tring to instal stock winmo on my xperia problem - XPERIA X1 Q&A, Help & Troubleshooting

I'm new to this. i have hard spl on my phone kovs110 0.72.olinex and the latest energy build. I want to flash with the stock rom via sony ericson update tool but when i try to it says that unnoficial software installed on the phone and that it can not be upgraded. what do i need to do to make it work? chage spl flash firs with a generic rom or what.

Related

is there a problem installing original GPS enabled ROM over cooked ones??

I have an HTC P3600 from france (Originally with SFR then deblocked and serial was accepted at HTC site for update) working with english Ausdim ROM and SPL 9.99-CF and i would like to try the original french ROM i downloaded from HTC site or the original english ROM from HTC wiki.
Would that cause a problem or reblock the CIF or block install of any modded ROM later
also if i try the DOPOD original ROM would it cause same problems or not??
THX for your help
should i flash SSPL before using original rom or still use Hard-SPL??
anybody there??
Since nobody answered and I actually tried it
YES it is possible to downgrade from cooked roms to original version but always use SSPL as recommended by trinityguides.info and it will propably revert your SPL & radio version to original But not CID as I have seen.
But you have to install Hard-SPL again before installing a cooked rom.
Sometimes just installing the original rom can unbrick the phone stuck at boot screen even if failed to complete but of course this is not done using SSPL so i dont assume it is that safe
these remarks are from my personal experience

Please advice !!!

My brother bought for me X1 from Leipzig Germany its factory unlocked and has no branding. But it has windows in German.
My question is can I flash english rom vithout any spl unlocking?
and if yes please give me link which english wwe rom can flashed to my device.
I have experience with Elfin and Elfin was bought from china has chinese wm so I used wwe elfin rom and directly without unlocking it flashed.
So is there any chance that I can have englisj X1 rom original not cooked that can drieclty flash to my device?
You will need to flash HardSPL for X1 first (it's sticky on this forum), then you can flash UK rom. Remember that German version of X1 have qwertz keyboard, so if you will flash UK rom then some keys will have another function then they show.
But after that hardspl when I will change to UK can I go directly SEUS to recoknized my phone as UK phone and update via website? So if somebody have experience flashed German rom to UK generic and after that tested SEUS service please share here the results.
Can somebody give me link for UK Generic non customized rom I found on forum but it says at then begingn of link Customized UK I need original genereic UK rom please help me to find also if you tell me how to dump my rom I can dume German Generic rom for share with forum
When you've done HARDSPL you can use the SE update service
Thannks for info Fards
One more question I have conected with SPL things.
I have experience workign with HTC TOUCH XL USPL tool and flashed lot of roms with that tool but in HTC any time you need to flash another rom you should use USPL tool and then at some stage start RUU and flash your rom.
also if you stack in bootloader or in other stage you can always recover your phone using RUU and your device default rom.
Is this possible in X1?
Lets say I have German Genereic rom deivce I want to flash to UK rom direclty without any SPL tools and stucked in some stage with error. Can I use Kovski RUU and German Genereic rom (which is the my device's defalut rom) and recover from that stage?
Thanks in advance
ITMASTER said:
Thannks for info Fards
One more question I have conected with SPL things.
I have experience workign with HTC TOUCH XL USPL tool and flashed lot of roms with that tool but in HTC any time you need to flash another rom you should use USPL tool and then at some stage start RUU and flash your rom.
also if you stack in bootloader or in other stage you can always recover your phone using RUU and your device default rom.
Is this possible in X1?
Lets say I have German Genereic rom deivce I want to flash to UK rom direclty without any SPL tools and stucked in some stage with error. Can I use Kovski RUU and German Genereic rom (which is the my device's defalut rom) and recover from that stage?
Thanks in advance
Click to expand...
Click to collapse
You should be able to yes, obviously make sure you've done hardspl before going to the UK rom.
The SEUS uses RUU to flash the rom.
If you have your own rom (such as stock german one) then it's much much easier to flash from the SD card. Jack did a decent walkthrough of that.. but just rename the file to KOVSimg.nbh and go into bootloader (volume down and reset at the same time).
is USPL available for the X1?? or its just the HD?
USPL is not available for Xperia... would be cool if it is made available at some point, though I've already flashed HardSPL!

sony update service: no update available

i'd like to restore to a valid update from the sony update service.. so i restore my stockspl successfully , loaded update service however it says there is no update for my device.
currently i have x1_firestorm_v5.0.28005LEO-MAX ... it works well however like i said above i need to restore to the original sony firmware
i dont know why it says no update is available?
pls help?
u flashed stock spl without going back to an official rom first?
nevermind here are all the official roms:
http://forum.xda-developers.com/showthread.php?t=475482
ok i downloaded this one
but its a .image file.
what or how do i use this image file?
can i rename to nbh and ???
APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.image
got it.
renamed to ruu_signed.nbh and added romupdateutility.exe.
first time it failed for some reason at 10%
tried again with success
u update your phone while using stock spl?
i installed STOCKSPL 0.72
on the colored screen it says:
KOVS110
SPL-0.79.0000
MICROP1-707
MICROP2-707
updateservice says i am at the latest, R3AA010
is this the latest?
is there a ROM with arabic localization?
because when i bought the x1 i remember it had a button that said "iTouch"... i backed up that rom but damn it doesnt work. the backup i made DOES restore just fine but it doesnt go back to the way the phone was when i bought it.

What should the boot loader screen shows for Stock SPL

Hi everbody
I used HARDSPL to flash cocked roms on my X1
the point is I have to send it to repair the keypad, I tried SE update center to flash the stock 6.1 ROM, but it didn't work as I expected, so I flashed the stock RUU_SIGNED from the sticked Hard SPL thread here, tried to update again using update center, and bingo, it's working, but my point is, what should the boot loader screen now be showing, mine shows
"KOVS110
SPL-0.78.0000
MicroP1-787
MicroP1-707"
any problems if I sent it to the repair center now?
thx
Maybe this topic can help you to find out how to restore SPL
read "how to restore Stock SPL for warranty reasons."
http://forum.xda-developers.com/showthread.php?t=431218
thx dreaminside
yes, I already did, I followed it
but I don't know if I succeeded or not
oh sorry for that
i forgot the default SPL number too.
http://forum.xda-developers.com/showthread.php?t=497511
4. How To Install The Stock Rom (For Warranty Reasons)
Download .mov file here 31mb (Quicktime Format)
try this one , maybe it will help you find out
black heart said:
Hi everbody
I used HARDSPL to flash cocked roms on my X1
the point is I have to send it to repair the keypad, I tried SE update center to flash the stock 6.1 ROM, but it didn't work as I expected, so I flashed the stock RUU_SIGNED from the sticked Hard SPL thread here, tried to update again using update center, and bingo, it's working, but my point is, what should the boot loader screen now be showing, mine shows
"KOVS110
SPL-0.78.0000
MicroP1-787
MicroP1-707"
any problems if I sent it to the repair center now?
thx
Click to expand...
Click to collapse
you're fine, that's how it should look like.
(actually, you reflashed stock-spl 0.72 and SEUS updated it to 0.78)
if you still had hard-spl on it, it would read "0.72.OliNex".
edit:
did you flash a stock-rom first or not? you should do that BEFORE flashing stock-spl... (in case you're using a custom rom)
Thanks dreaminside
caliban2 said:
you're fine, that's how it should look like.
(actually, you reflashed stock-spl 0.72 and SEUS updated it to 0.78)
if you still had hard-spl on it, it would read "0.72.OliNex".
edit:
did you flash a stock-rom first or not? you should do that BEFORE flashing stock-spl... (in case you're using a custom rom)
Click to expand...
Click to collapse
well, I couldn't flash stock rom using SEUS without first flashing Stock SPL, so yeah, I flashed SPL first, then ROM, but boot loader is still showing the same msg, so am I still fine ??
black heart said:
Thanks dreaminside
well, I couldn't flash stock rom using SEUS without first flashing Stock SPL, so yeah, I flashed SPL first, then ROM, but boot loader is still showing the same msg, so am I still fine ??
Click to expand...
Click to collapse
well, if SEUS didn't complain...
concerning the bootloader-figures you're fine.
Looking at your SPL its looks like you've been successful

Flashing official ROM: need to revert SPL, radio to original?

A few questions:
my diamond (mda compact iv) is hard resetting everytime i soft reset after installing the gen.y r5.5 sense 2.1 rom. i have hardspl 1.4.
i've spent all day today ****ing around with the phone. i think my next step is to try flashing an official phone, hard reset, then reflash a different rom, then hard reset again.
1: since it was originally a t-mobile branded mda compact iv, do i need to find the original t-mobile rom or can i just flash any official htc 6.1 rom?
2: do i need return all the spl, radio to the original as well before i flash to an official rom?
thanks.
Hi, since you have hard spl, you can flash any official diamond rom. You don't need to revert spl, or to change the radio. If the official rom has radio inside it will be flashed.
freakzone said:
Hi, since you have hard spl, you can flash any official diamond rom. You don't need to revert spl, or to change the radio. If the official rom has radio inside it will be flashed.
Click to expand...
Click to collapse
I have a problem with my Diamond, HTC USB Sync Drivers which i downloaded
wouldn't work, i can't extracted them. No archives found????
Hi and welcome to xda , what is the os on your pc. From what I remember the hotsync drivers were installed automatically. Try to download the rom again, maybe the RUU was toasted.

Categories

Resources