[Q] thin case for NS4G - Nexus S Accessories

They just came out so I don't expect miracles but I figured that one of these stretch rubber kind might fit it. However, I hate to add more thickness to the phone so does anyone know of an extra thin one?

You can try a i9023 case as I believe the super LCD Nexus are slightly thicker than the i9020s. I'm not too sure if the thickness is the same as the sprint versions though.
Sent from my Nexus S using XDA App

The sprint store has a few gel cases that are thin. People are also reporting that the CaseMate Pop fits the 4G.

Has anyone gotten this case:
http://shop2.sprint.com/NASApp/onli...=Carry+&+Protect&selectedAccessoryID=CZS0566R
How is it? what's the fit like. Can you post some pics?

I went with the Incipio Feather case. Its the thinest I know of.
http://www.myincipio.com/Google-Nexus-S-Cases-Accessories/Incipio-Samsung-Google-Nexus-S-feather-Ultralight-Hard-Shell-Case.asp

Does it snap on well on the NS4G?
Sent from my Nexus S 4G using XDA App

obsanity said:
Does it snap on well on the NS4G?
Click to expand...
Click to collapse
It hasn't shown up yet so I wont know for another day or 2. Users on other forums have confirmed that it fits well.

As reported in other thread incipio case fits NS4G without problems, the only "complaint" is that the cutout for power button is not centered but lowered, still it doesn't affect/press the button.
Mine came cracked at the bottom, called incipio, they're sending a new one.

i got this case and its a pain to press the power button
http://shop2.sprint.com/NASApp/onlinestore/en/Action/OSBrowseAccessoriesDetail?categoryRefName=Carry+%26+Protect&PHONE_ID=SPHD720KIT&selectedAccessoryID=CZS2033R&topPageNumber=0&subPageNumber=0
wish power was on top rather then on the side .. i usually change the volume when trying to turn on volume with my other fingers.
My wife wants this case but i dont believe that it will fit on the 4g version
http://cgi.ebay.com/Samsung-Nexus-S...706558?pt=PDA_Accessories&hash=item48406faf7e
even though it says it does
all the other ones on ebay say they wont fit

Honestly I had the hard case from best buy and it fit my ns4g better than my tmo ns Im sure any hard case will work with it. That said dont get the platinum hard case from best buy it is garbage. Those gel cases from sprint seemed about the same thickness as the best buy hard case it hit the holster perfectly but i didnt put one on the phone. Instead I went with this
http://shop2.sprint.com/NASApp/onli...ryID=CHS8564R&topPageNumber=0&subPageNumber=0
I am very happy with this case it fastens together very securly and fit even with the invisa-sheild

When I got my ns4g I had the same problem so I got both a red incipio feather and the case/holster combo from sprint
http://shop2.sprint.com/NASApp/onli...ryID=CHS8564R&topPageNumber=0&subPageNumber=0
The incipio fits fine minus the fact that power button is a little off but its really not a problem or a deal breaker. The case from sprint works great and isn't too bulky either, though not as thin as the incipio case. I personally would suggest both.
Sent from my Nexus S 4G using XDA App

myeyez said:
The sprint store has a few gel cases that are thin. People are also reporting that the CaseMate Pop fits the 4G.
Click to expand...
Click to collapse
Just a heads up. The gel case at the Sprint store sucks.. It's so tight you barely have to touch the phone to turn it on, or key a volume key.. It's really awkward pressing buttons through a layer of gel.

obsanity said:
Has anyone gotten this case:
http://shop2.sprint.com/NASApp/onli...=Carry+&+Protect&selectedAccessoryID=CZS0566R
How is it? what's the fit like. Can you post some pics?
Click to expand...
Click to collapse
Here you go, the phone was very thin to begin with [Coming from an evo mind you] so i wanted to add some bulk using the case, but it doesn't add much at all...very little
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1621.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1619.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1618.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1617.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1612.jpg

XxsydenxX said:
Here you go, the phone was very thin to begin with [Coming from an evo mind you] so i wanted to add some bulk using the case, but it doesn't add much at all...very little
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1621.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1619.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1618.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1617.jpg
http://i98.photobucket.com/albums/l274/XxSydenxX/IMG_1612.jpg
Click to expand...
Click to collapse
Yeah.. This is the sucky gel case I threw in the trash. Very annoying to operate the power button and volume keys through that layer of gel.

Well... I've successfully tried ALL available cases for the NS4G now, and I'll say this... they ALL suck. All of them. I hope some decent offerings become available soon.

droidmage said:
Honestly I had the hard case from best buy and it fit my ns4g better than my tmo ns Im sure any hard case will work with it. That said dont get the platinum hard case from best buy it is garbage. Those gel cases from sprint seemed about the same thickness as the best buy hard case it hit the holster perfectly but i didnt put one on the phone. Instead I went with this
http://shop2.sprint.com/NASApp/onli...ryID=CHS8564R&topPageNumber=0&subPageNumber=0
I am very happy with this case it fastens together very securly and fit even with the invisa-sheild
Click to expand...
Click to collapse
How does this phone fit the ZAGG Invisashield? Does it match up well with the power buttons etc?
Thanks!

The Incipio Feather case is perfect. Nice matte black finish, feels great in hand, and us thin, but still overlaps the top of screen which is great.
I know it fits slightly off on my 4G version but that's barely noticable. Looks awesome.
I have the Feather case on my EVO as well, but it does not come up and overlap top of screen, it only goes up 90% on the sides which I do not like. Wish it was designed same as the Nexus-S version.
Sent from my EVO 4G "Myn's RS 5"

styckx said:
Just a heads up. The gel case at the Sprint store sucks.. It's so tight you barely have to touch the phone to turn it on, or key a volume key.. It's really awkward pressing buttons through a layer of gel.
Click to expand...
Click to collapse
Thanks for the heads up.

The clear argyle gel case is what I have. Yes, in the beginning it was a pain in the ass to push the buttons. I tried a little cutting on the case and now it's not so difficult to deal with. I got a brand new exacto knife blade with a tip blade. I put the case on the phone and gently made a surface mark on the top, bottom, left and right of where the buttons actually are. The volume seemed centered correctly but the power wasn't. Anyways, I made my marks with the tip of the knife so I knew where to cut. I went about a millimeter farther than I needed to go on the borders. I removed the phone and put something the same thickness as the phone on the inside of the gel to give me some leverage to carefully make the cutouts in the gel. I didn't try to cut it all in one shot. I made many passes on the line I was cutting until I managed to go all the way through. It doesn't look stock and it's not ocd perfect but it got the job done and the case is still strong. I originally got the two piece with the holster at sprint but I didn't like it quickly when holding it in my hand with a flat palm, the phone would slide down easily in my hand. I was too afraid of that adding to the chance it might fall out of my hand. The gel is still strong, covers all the phone, has a lip on the front where the screen is so it's not flush on the screen and it doesn't interfere with a zagg screen protector. I could post pics if anyone is interested in seeing it.

herbthehammer said:
The clear argyle gel case is what I have. Yes, in the beginning it was a pain in the ass to push the buttons. I tried a little cutting on the case and now it's not so difficult to deal with. I got a brand new exacto knife blade with a tip blade. I put the case on the phone and gently made a surface mark on the top, bottom, left and right of where the buttons actually are. The volume seemed centered correctly but the power wasn't. Anyways, I made my marks with the tip of the knife so I knew where to cut. I went about a millimeter farther than I needed to go on the borders. I removed the phone and put something the same thickness as the phone on the inside of the gel to give me some leverage to carefully make the cutouts in the gel. I didn't try to cut it all in one shot. I made many passes on the line I was cutting until I managed to go all the way through. It doesn't look stock and it's not ocd perfect but it got the job done and the case is still strong. I originally got the two piece with the holster at sprint but I didn't like it quickly when holding it in my hand with a flat palm, the phone would slide down easily in my hand. I was too afraid of that adding to the chance it might fall out of my hand. The gel is still strong, covers all the phone, has a lip on the front where the screen is so it's not flush on the screen and it doesn't interfere with a zagg screen protector. I could post pics if anyone is interested in seeing it.
Click to expand...
Click to collapse
I'm interested. I'm a little OCD... but I'm coming from the EVO and it just feels like the NS is like a bar of wet soap that I'm going to drop, and I have no rope.

Related

Any case available that doesn't inhibit 'screen edge' touching?

Like when you move an icon from one home screen to another, you slide it to the edge and wait. I've tried a few different cases and they all have such a high edge on them taht they inhibit my thumb/finger's ability to go all the way to the edge of the screen - making it virtually impossible to move an icon.
The bigger issue is that it affects my typing when trying to quickly swype through the "P" or "Q", etc.
So...anyone have a case with a very low profile..allowing your finger to glide over that are similar to a case-less phone? I rarely, if ever, see that being discussed when cases are talked about.
I too am interested in what people have to say about this. I have a 2-piece hard case i don't use because it prevents me from using Swype effectively, so i just resorted to the Zagg full-body screen and avoid putting things in my pocket alongside my phone lol
I just use the verizon high gloss black case. it's a great fit. I actually had the body glove before but moved down to this one... don't drop my phone so I don't feel a need for a huge case ya know? I can now use swype and drag effectively as well.
Is the verizon case a two piece snap on or a flexible pull on?
Try the 'ElCheapo' in my sig.. swype works GREAT with it.
magicmycote said:
Is the verizon case a two piece snap on or a flexible pull on?
Click to expand...
Click to collapse
The Verizon case is a one piece flexible pull on.
I does have the raised lip you are talking about but it is not as pronounced as some of the aftermarket cases I've seen.
Here is one on eBay (this is the one I bought).
Verizon HTC Incredible Black Silicone Gloss Cover OEM
Just a side note...
When moving items from one screen to the other, I find it hard even without a case. A solution that works for me is to press the item you want to move and then use the virtual trackball to move from one screen to the other.
gadget!
gadget! said:
The Verizon case is a one piece flexible pull on.
I does have the raised lip you are talking about but it is not as pronounced as some of the aftermarket cases I've seen.
Here is one on eBay (this is the one I bought).
Just a side note...
When moving items from one screen to the other, I find it hard even without a case. A solution that works for me is to press the item you want to move and then use the virtual trackball to move from one screen to the other.
gadget!
Click to expand...
Click to collapse
not that I'm moving icons around constantly, but this will definitely help me, thanks!
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=12056&page=1
I have never had any troubles with swype while using this case. It covers no section of the screen and grips onto the small outer edge of the phone. Works like a charm!
I also hate hitting my case when swyping the screen. I find that the argile design case from amzer.com works best for me and I've been using it for a month.
Sent from my ADR6300 using XDA App
admittedly, I don't have my DInc just yet but I ordered/received the Seidio Innocase Actice II for HTC Incredible... It came with a cardboard insert that mimics the phone actually being inside of it... The edges on this case seem to be really low profile and with this cardboard insert my finger can easily glide off edges.
You can get find an in-motion view of the same case for Evo on Youtube—I can't link as I am a n00b
My DInc is coming tomorrow so I will update with results but with the silicone edges and a slight inner bevel to this I think it may be what you're looking for... case features an outer exoskeleton that protects back and corners for more protection than just the silicone material could offer.
UgXvibe said:
Try the 'ElCheapo' in my sig.. swype works GREAT with it.
Click to expand...
Click to collapse
Thanks a bunch for this. Handhelditems.com is amazing!! I just ordered two "ElCheapo" skins and a 3-pack of screen protectors with express shipping (3-5 days) shipping for $15. I've seen a good review of the screen protectors and I think I'll wind up being very pleased for the money.
I used the 30% off coupon code found at http://www.techbargains.com/vendor_detail.cfm/596/Hand-Held-Items-coupon-code
Seidio Active case is pretty much non-intrusive...with good access to the screen.
http://forum.xda-developers.com/showpost.php?p=7424801&postcount=6
UPDATE...
Swype beta appears to be closed but I've had my phone and Seidio Innocase Active for a few weeks now and I think this case will work just fine with Swype and the edge issue you mentioned.
Silicone case from best buy. Just for a red one today.
Sent from my ADR6300 using XDA App
the Barely There case by Case-Mate is the best i've seen thus far. I absolutely love mine. Though the face of the screen isn't protected very well, the corners and back are. Its material feels the same as the battery cover on the back of the device. It looks nice and is very comfortable.
http://www.case-mate.com/HTC-Droid-...e-HTC-Droid-Incredible-Barely-There-Cases.asp
vantagejuan said:
Thanks a bunch for this. Handhelditems.com is amazing!! I just ordered two "ElCheapo" skins and a 3-pack of screen protectors with express shipping (3-5 days) shipping for $15. I've seen a good review of the screen protectors and I think I'll wind up being very pleased for the money.
I used the 30% off coupon code found at http://www.techbargains.com/vendor_detail.cfm/596/Hand-Held-Items-coupon-code
Click to expand...
Click to collapse
Well, I just got my cases and screen protectors yesterday. The cases are fantastic for the price. The screen protectors on the other hand were all cut to big and left bubbles after applying them, so I'm having them send me new ones. At least it was only $4 for all three.
I picked up the Spect case from my local VZW yesterday. I had the faded black/red from vzw and I hated the sides on it.. I wanted a one piece, not a 2 piece..
well this one is friggin awesome. The sales folks working there had never heard/seen the case before and In the 30 minutes I was in the store, 4 employees bought it after playing with it on my phone and 2 additional customers bought it as well. its a one piece design and the interior is cloth so it wont scratch up the screen. I dont have an issue with Swype as it doesn't cover the front at all.
Well worth checking out...
Innocase ii here, no issues at all.
vantagejuan said:
Well, I just got my cases and screen protectors yesterday. The cases are fantastic for the price. The screen protectors on the other hand were all cut to big and left bubbles after applying them, so I'm having them send me new ones. At least it was only $4 for all three.
Click to expand...
Click to collapse
Your welcome! What colors did you get? I got the black first then ordered the Burgundy later on.. I was kinda hoping it would be a bit darker though.
Did they give you any kinda application fluid for the screen protectors?
mattymo said:
the Barely There case by Case-Mate is the best i've seen thus far. I absolutely love mine. Though the face of the screen isn't protected very well, the corners and back are. Its material feels the same as the battery cover on the back of the device. It looks nice and is very comfortable.
http://www.case-mate.com/HTC-Droid-...e-HTC-Droid-Incredible-Barely-There-Cases.asp
Click to expand...
Click to collapse
Those look nice. I'm going to look into those. Thanks

New Case Help

I have one of those junk TPU silicone cases and it drives me nuts. I cant reach the edge of the screen. I cant push the buttons. Aside from that its perfect.
Im looking for a case that has a clear back and a very soft rubber or open areas where the buttons are or something with a carbon fiber pattern.
My buddy has an iPhone 4 case that snaps on the back, but leaves the screen and the edges totally free and the top and bottom have a cutout for the adapter and the buttons on top. Something like that would be great.
Perhaps the Griffin "Reveal" case would work?
http://forum.xda-developers.com/showthread.php?t=933198
aatrek said:
Perhaps the Griffin "Reveal" case would work?
http://forum.xda-developers.com/showthread.php?t=933198
Click to expand...
Click to collapse
Highly recommended. Using it now. It has a frosted back though, but you can certainly still see whats going on through it.
Sent from my Droid Incredible running CM7.0.3.
I like the case but Im hoping to find it on eBay. I've got eBay bucks to spend. I found one similar.

[Q] Case & screen protector questions

Hey guys,
Anyone found a hard case that fits in the car dock yet? Tried the incipio one but it's pretty tight, and the last thing I wanna do with my shiny new bionic is to go wedging and squeezing it
Also, I've heard that because the screen is gorilla glass there's really no need for a screen protector, anyone wanna weigh in on this? I generally carry the phone in my pocket with nothing else in it, should I be worried about scratches or scuffs through normal use and carrying? In the event of a bad enough drop/scratch that the screen would get damaged, would a screen protector provide any help anyway?
Thanks in advance for any advice, and hope everyone is enjoying their phone as much as I am!
soul777toast said:
Hey guys,
Anyone found a hard case that fits in the car dock yet? Tried the incipio one but it's pretty tight, and the last thing I wanna do with my shiny new bionic is to go wedging and squeezing it
Also, I've heard that because the screen is gorilla glass there's really no need for a screen protector, anyone wanna weigh in on this? I generally carry the phone in my pocket with nothing else in it, should I be worried about scratches or scuffs through normal use and carrying? In the event of a bad enough drop/scratch that the screen would get damaged, would a screen protector provide any help anyway?
Thanks in advance for any advice, and hope everyone is enjoying their phone as much as I am!
Click to expand...
Click to collapse
The screen protectors they try to sell you at the VZ stores are *always* useless on *all* phones. And since the Bionic has gorilla glass, even the invisibleSHIELDs and Bodyguardz are useless also. You don't have to worry about scratches and scuffs at all on a device that has gorilla glass.
As for cases, I don't plan on using one at all, so I don't have an opinion on that.
i purchased the Shell Holster combo from Verizon and if you remove the insert in the car dock the phone will fit in it with the hard shell on it.
The hard shell also works with the extended battery.
I'm looking for a case that fits over the extended battery. Didn't like the uncomfortable plastic one verizon offers. Haven't seen any others.
Sent from my DROID BIONIC using XDA App
I tried the shell holster combo, didn't seem to fit in the car dock even with the insert removed. It felt like the bulge that allows for the extended battery made the case too wide for the clamp on the car dock to fit over the phone, but I was also being pretty delicate with the thing (like I said, I REALLY don't want to go wedging and squeezing anything on my new baby!), but maybe I missed something? Can you post pics of yours in action?
I'll also say that I thought it was odd that the only clamshell holster that my verizon store had was one that fit the extended battery, it definitely seemed to add a lot of bulk to the phone that you don't need if you're not using it. Is there just the single "one size fits all" version of this case, or are there separate ones for the standard and extended batteries (which seems like it would make a lot more sense)?
Also, thanks for the advice on the gorilla glass, I did get a set of verizon screen protectors (even though I know they're worthless) just as a temporary measure until I could get a better one, but I guess I'll be tearing that thing off and seeing how it goes. Anyone else wanna add their weight to this recommendation and make me feel a little better about going au-natural on the screen? I'm coming from a Dinc which definitely needed the screen protector, so I may just be a little paranoid, but it would totally ruin my day if I went without and then ended up with a permanently scuffed screen
Thanks again for all the advice guys, I'm totally loving this thing, just gets better and better every day I use it!
I didn't use anything on my screen (or a case for that matter) on my DX for the year I had it and the screen still looks brand new. I usually carried the phone in my pocket with nothing else in the pocket. Also dropped the phone a few times and no damage whatsoever.
Sent from my DROID BIONIC using XDA App
I had Gorilla Glass on another phone and used it for over a year with ZERO scratches. I do not plan on using a screen protector with my Bionic. However, I am shopping for a thin case to stop surface scratches.
I had two OG droids over a period of two years that never had a screen protector.
One did get a very minor scratch but the other I had for longer was flawless the entire time.
I think the only thing you have to watch out for if you're going bare is sand.
So what are you guys recommending for cases? I like the Incipios, but if the holster works in the car dock, that'd be a big selling point.
azshorty2003 said:
I'm looking for a case that fits over the extended battery. Didn't like the uncomfortable plastic one verizon offers. Haven't seen any others.
Sent from my DROID BIONIC using XDA App
Click to expand...
Click to collapse
Looking for a case to fit over the extended battery as well. Hoping that there will be some soon!
You do NOT need a screen protector... rocked the D1 for ~2yr without one and not a single blemish became of it.. it has the same gorilla glass screen:
Youtube:Motorola Droid A855 Key Screen Scratch Test
As for cases... I got the 'high-gloss silicone' case from VZW... I like it, EXCEPT that the power button doesn't work in the car-dock. I was thinking of returning it, but I might just go exacto on it and make a little cut-out for the power button.
I don't know if this is very relevant but tomorrow i'm picking up the otterbox defender bionic case from radioshack (got a buddy whose a rep that can get me a discount). I've seen the otterbox cases on other phones and they're awesome. They do add a lot of bulk but if you're often at risk of destroying your phone if you drop it like I am, (I work at citizens bank park in philly) the bulk is well worth the protection.
Wow, some of you guys are very lucky. Gorilla Glass, without a doubt, CAN SCRATCH. It handles things like coins and keys fine, but things that are harder, like sand, will scratch it. It amazes me that some people still say its unscratchable. Do yourself a favor and get a good quality screen protector, not that Zagg garbage. I recommended Steinheil Ultra Crystal. Once its on, you'll never notice it. Just like glass.
So, just in case anyone was wondering, I did end up finding a hard case that fits in the docks/mounts easily and allows charging and dock mode. The Incipio Feather is what I got, and I'm really liking it. It barely adds any bulk to the phone, but it gives it enough protection to ward off pocket scratches or dings and would probably do fine in a small drop. It does come with a screen protector but I wouldn't recommend using it, it's one of the harder plastic ones that picks up fingerprints like crazy, and while it's big enough to fit the entire screen it doesn't bend to conform to the screen's curves so it overhangs and lifts up around the edges which sucks. I'll probably end up getting a Zagg or a Steinheil instead, but as for the case I highly recommend it to anyone who wants a hard case but not much bulk!
My steinheil screwed with the proximity sensor.
Sent from my Xoom using XDA App
skullvet said:
My steinheil screwed with the proximity sensor.
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
Interesting. Did you contact them? I haven't had this problem on my phone or tablet.
I've heard that the OEM case verizon sells fits in all the docks. I believe there's some sort of insert that you can pull out to adapt for the case. Thoughts...?
cbal04 said:
I've heard that the OEM case verizon sells fits in all the docks. I believe there's some sort of insert that you can pull out to adapt for the case. Thoughts...?
Click to expand...
Click to collapse
Gel OEM case fits without the insert. I rock it everyday.
Sent from my DROID BIONIC using xda premium
Yes, the oem SILICONE cases fit in the docks, but if you're like me and want a hard case you'e SOL. There are only three hard cases that verizon sells for the Bionic, the Incipio two-piece case, the Otterbox, and the shell holster combo, and none of them seem to fit the docks and allow charging/dock mode (not to mention that the otterbox and shell/holster are both huge). You're right about the insert, but it still doesn't help with any of the hard cases that were released at verizon, which is why I'm so stoked to find the one I did!
soul777toast said:
So, just in case anyone was wondering, I did end up finding a hard case that fits in the docks/mounts easily and allows charging and dock mode. The Incipio Feather is what I got, and I'm really liking it. It barely adds any bulk to the phone, but it gives it enough protection to ward off pocket scratches or dings and would probably do fine in a small drop. It does come with a screen protector but I wouldn't recommend using it, it's one of the harder plastic ones that picks up fingerprints like crazy, and while it's big enough to fit the entire screen it doesn't bend to conform to the screen's curves so it overhangs and lifts up around the edges which sucks. I'll probably end up getting a Zagg or a Steinheil instead, but as for the case I highly recommend it to anyone who wants a hard case but not much bulk!
Click to expand...
Click to collapse
Hey I'm considering this Feather or the Seidio Surface case (which I had with my Incredible). From the pics on the Incipio website for the Feather case, it looks like the top corners are exposed...is that true? Its a little hard to tell from the website pics. Would you mind taking a couple of pics of the corners with the case on and posting here?
Thanks!!
papasmurph said:
Hey I'm considering this Feather or the Seidio Surface case (which I had with my Incredible). From the pics on the Incipio website for the Feather case, it looks like the top corners are exposed...is that true? Its a little hard to tell from the website pics. Would you mind taking a couple of pics of the corners with the case on and posting here?
Thanks!!
Click to expand...
Click to collapse
I am wondering this as well. Seems like the bottom chrome bezel might get dinged from a drop. Only thing keeping me from loving that case.
Sent from my DROID BIONIC using xda premium

[Q] Incipio Feather Light Case?

Does anybody have this? It looks really sharp (and I'm about to order one) but the only thing holding me back is the top/bottom. It looks like it doesn't cover it properly. Whenever I've dropped a phone and got some scuffs, it's always the top and bottom that take the brunt of it.
If you have this case, could you post some pics? Or provide some insight to the protection? Here is a link to it on Amazon:
http://www.amazon.com/Incipio-MT-143-Feather-Motorola-Bionic/dp/B005DQF7TU
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
envizion58 said:
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
Click to expand...
Click to collapse
Ok ok, I like. Can you post some pics? I've seen a bunch of pics online, but I want a clear view of the top and bottom.
Sent from my DROID BIONIC using xda premium
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
envizion58 said:
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
Click to expand...
Click to collapse
Thanks for the link, just checked it out. I'm still torn. I absolutely LOVE the look and sleekness of it, but I know as soon as I buy it I'll drop my phone and scuff the top. This would anger me
I dropped my x2 three days after purchase and scuffed it all up right at the top. I haven't let this Bionic be naked once - it was covered before I left the store.
It's a damn shame too - because this phone is sexy naked.
Decisions decisions...
Sent from my DROID BIONIC using xda premium
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
I bought the incipio feather a few weeks ago and its by far the best case out there if you like to keep the curve of the phone and you dont want to add an siginificant bulk
dendthoff said:
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
Click to expand...
Click to collapse
Which Cruzer Lite cases did you get?
I for one, love the Feather case...but alas, I contacted Incipio and they have no plans to make one for the extended battery. Does anyone know of a case that is similar to the feather, but fits the extended battery?
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
Thanks for the post - good read.
I researched the case you spoke of and it's very similar to the Verizon gel case I currently have. It definitely provides the right amount of protection, but I'm looking to get that "sexy naked feel" the unprotected Bionic provides.
Here is what I'm thinking. I'm going to order the matte black phantomskinz skin. Cover the top and bottom (the only parts exposed from the incipio feather case) and then rock the incipio. Might be slightly ghetto, but I'm sure I can get it looking good. That will give me the lightweight feel of the incipio case with some protection from nicks and scratches on the top and bottom.
I'll post pics when I make it happen.
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
efingguy said:
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
Click to expand...
Click to collapse
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Just ordered the incipio feather. I'll give my opinions in two days.
mistawolfe said:
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
efingguy said:
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
Click to expand...
Click to collapse
My gel case from Verizon does get very sticky and greasy. Makes me mad.
Sent from my DROID BIONIC using xda premium
Update..
I just noticed my desk dock had a "padding"... it totally fits with this case on!
Got this case today.
Initial impressions:
*Absolutely love the thinness of it. It feels like I don't have a case on. Looks sharp.
CONS:
*No top and bottom protection (I knew this before purchase)
*Back gets smudgey
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
You know what I just realized? When I wrote this post, my phone was in a TPU case. Lol.
I got the smoky argyle one, and definitely loved the appearance and lightweight feel of it. I thought it felt a little janky by the power button (was pretty loose) and there were some leftover nubs from where it was cut - clearly visible against the black background of the screen.
I got some black sandpaper and sanded it down, but it left the case looking like garbage. I got it for $2.95 + $2.95 shipping, so I'm not complaining. I might end up ordering another.
I just got this case, iridescent red one, I agree the top and bottom is exposed but the look and feel of it is very nice. It is very sexy looking as well, doesn't cover anything that shouldn't be covered like holes etc.
The main reason I got this one was that someone said it would fit in the Moto car dock, and it does. However, if I hit a bump some times it pops up justttttt enough to stop charging. Pop it back down and it stays for a while again.
Funny no one else ever mentions this but I live in Florida, and every single black droid I have owned (1, 2, 2global, and now bionic) overheats when going on long trips and using Nav. Can't charge it when it overheats. I wanted to go with Iridescent Red to maybe reflect some of that heat...hope it works.
Also, red and black just go together....

VS980 Dynamic Tuff Impact Hybrid Cover Case

I just wanted to make a post about this case I bought on ebay for my Verizon G2. The listing on ebay said it was for D800 and never mentioned the case fitting any of the other variants - especially the Verizon version with it's different back layout. Anyways, I took a chance since I got 2 of these cases for under $15. They looked very good for the price, they are a 3 piece case that includes a rubber base piece and hard plastic for the bezel and back of the phone. The cases arrived in the mail yesterday and they fit perfectly. That's about all that needs to be said, there's no bulging or any signs of bad fitment anywhere. In fact, the only way to tell this case isn't for the VS980 is the small circular cutout above the camera and flash cutouts on the back. The VS980 doesn't have anything under that circle (I think it may be something to do with a mic on AT&T version???). But the back button cutouts don't even look like they're too big, even though the VS980 has smaller, slimmer buttons. I'm VERY pleased with these cases.
Some notes:
- I would describe the plastic backing of the case as a slick matte finish and the rubber inner cover adds a good grip to offset that. It feels very good in the hand and not at all like it could slip from your fingers easily.
- The case is 3 pieces, as I mentioned earlier. The inner rubber case, the plastic outer and plastic front bezel cover easily snap and unsnap together over top of the rubber.
- No one likes bulky cases and I don't feel like this one adds much to the phone. No more than an Otterbox Commuter.
- The only gripe I have is that where I have changed my LCD density on my G2, the top nav bar is hard to pull down where the case sticks up a little. However, this may not be an issue with the stock density of 480 where the nav bar is a little fatter. Also, the case sticking up is not a bad thing, obviously when the phone is laid face down this is a good thing so the screen never comes in contact with the surface the phone is laid on.
- One good thing for people who use the back hardware buttons a lot, which I don't because I use the knock on/off every time, this case's cutouts make it very easy to feel where the buttons end and begin. Not sure about other versions, but the VS980's buttons are small and almost feel flat to the back of the phone. This is a big reason I avoid using them if possible. However, with the case on it's much easier to make sure you press the one you're meaning to.
This part of the review only pertains to anyone who might have the Otterbox Commuter case from a Droid DNA if that's what phone you're coming to the G2 from. My DNA Otterbox fits the G2 LIKE A GLOVE. It's weird actually. Aside from the bottom headphone jack and covering up the back buttons, everything else is perfect. You can see what I mean from the pics. So if you're someone who has this case and doesn't use the headphones and back buttons much then this case will work for what it's meant to do - protect your phone. I use my headphones at the gym all the time, otherwise it would be the one I use. All you would have to do is drill a hole in the bottom where the jack is and you're good to go. I know this is an easy mod because I actually drilled a hole in the back of the case to make the DNA's rear LED notification light visible. That was strange to me how the Commuter didn't come with that cutout on its own.
Anyways, I'm sorry for getting off topic, but it really is relevant since some others like me who came from the DNA may have the same case.
In conclusion, the Dynamic Tuff Impact Hybrid Cover Case, as it's called on ebay, works PERFECTLY. Don't worry if it doesn't say it fits the VS980, because it does. There are tons of color options and they can be mixed and matched. That's what I did, I bought the Blue/Black and the Black/White to make the Blue/White (Kentucky Wildcats basketball, Go Big Blue!) and also to have a solid Black case too.
For $7 you can't beat this case and it fits all G2's. Take a look at the pics. I hope this will be useful to Verizon G2 owners who are looking for a good case.

Categories

Resources