I'm in a messed up situation. I flashed JVB(deodex.) directly from CWM (Darky 9.5) and that installed fine, but bootloaders didn't. Now I get a funny bootloader screen. But that's not the problem. The problem is that I cannot get into CWM or DOWNLOAD mode. CWM actually works, becouse when I enter it using 3 button combo, phone starts, and I see messed up pitcure (see attachment) and When i press power key (select key) phone reboots which is the first option in CWM. But i cannot flash or do anything becouse the screen is corupted.
I now want to flash a stock JVB using odin. I go into download mode, but my pc doesn't recognize my sgs. I says downloading, I connect with odin open, but windows 7 says: "USB Not recognized" and "Windows has stopped this device because it has reported problems. (Code 43)" .
Tried on 3 PC's, it won't work. My brother has another sgs, and his download mode works on all 3 PC's!!! So the problem can't be in the drivers!
So the problem is:
-> I can get into download mode but 3 PC's won't recognize SGS! (see attachment)
Second problem is:
-> Becouse I didn't update bootloaders when flashing JVB, i can get into cwm but I cannot see anything becouse of corupted screen! (see attachment)
What I did:
-> Darky 9.5 (2.2.1)
-> Flashed JVB Deodex using CWM
-> Flashed Chainfire 3.1 with CWM using ODIN
-> Download mode doesn't work anymore
-> CWM does not work anymore due to corupted screen/bootloader
-> Flashed Supercurio Hacked Kernel with SGS Kernel Flasher -> Problems remain.
So the bottom line is:
I can boot into JVB, and it works fine except some small isuess. But I can't access CWM or DOWNLOAD mode. Is there a way to fix CWM? Update BOOTLOADERS? Fix DOWNLOAD MODE? Is there alternative flashing method that i can use directly from working JVB rom? I can't be stuck on JVB without the option of CWM or ODIN!
Thanks in advance and sry if my english isn't very good.
...No one??..
Related
Ok guys now i have bricked Galaxy Tab.
Main problem is my customer wanted to install custom rom without rooting device. So there is no recovery mode. I flashed with odin and Heimdall but stuck at Galaxy Tab screen.
i found a solution. There is a recovery section in Heimdall. if someone tell me or send me recovery file i can test it and i will tell the last situation. If it works we will find a solution. if not ...
PS: if u have other solutions please offer me . i didnt find a suitable solution.
Thanks for reading
We would need to know what kind of tab.
it is euro tab
Can you get back into download mode (yellow android digging)? Or sometimes a phone-pc! picture? Then you can just reflash.
i can enter download mode but after re-flash system cant start. bec there is no recovery.
flashing has no relation with root... you can flash firmware on a not rooted device WITHOUT any problem.
recovery is inside the firmware you flash....I think you got some confused ideas...
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
- exec '/system/bin/sh' failed: No such file or directory (2) -
Any ideas ?
try this it might work
hold the power off button for 10 second
to make sure it really powered off
hold down all 3 button together
see if it power up in recovery mode
www.cepdukkani.net said:
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
Any ideas ?
Click to expand...
Click to collapse
You don't flash with adb. Flash with odin3 or heimdal.
man i am flashing with odin it reboots and stucks in Galaxy tab screen.
3 button combo stucks "Power Reset or Unknown Upload Mode " screen
Finally ;
Reflash with odin and heimdall :
Result Stuck at Galaxy Tab Screen. Adb result Device in Recovery.
Attempt a full flash with firmware that has recovery? MoDaCo is a good one. Doesn't sound bricked to me, sounds like your rom is not compatible with the firmware.
Are you flashing a ext4 firmware?
I got this tab stuck at the galaxy screen when I attempted a recovery to a non ext4 backup. Sounds similar.
Sent from my GT-P1000 using XDA App
i cant flash ext4 bec it stucks at %100
i re-tried it it gots FAIL at %100
This is a gsm tab, correct?
Have you tried any other kernels or roms?
Which are you currently trying to flash? Did you unlock the bootloaders?
Sounds like a revert to stock and 2nd attempt are in order.
Sent from my GT-P1000 using XDA App
i tried to flash PDA section it gave me error. i flash with PHONE section (via odin) it resets but still same error.
it is gsm euro tab. i tried original 5 firmwares
i tried Roto, JM6, Modaco, Overcome still stuck at same state...
i still think main problem is No Recovery partition in device.
If you can get it into download mode, then there is still hope...
Unfortunately, I don't have the answer...
When mine was stuck at galaxy screen, and wouldn't even go into recovery, I flashed a new kernel and all was well.
I also never used Odin, always Heimdel.
Sent from my GT-P1000 using XDA App
as i read in modaco :
after kernel update enter recovery
but no recovery after kernel update any ideas
Likely because you haven't gotten a complete flash... At least that is how you make it sound.
Are you sure you have and are following the instructions correctly?
Unlocked bootloaders and proper use of odin are the two things I would check right off the bat...
Sent from my GT-P1000 using XDA App
i am not sure that if my bootloader is unlocked or not.
i flashed with odin that is fine what else ?
Last resort I have for u
If u are able to get in download mode
Go get roto jme V4 full version
Flash it with Odin
Please read instruction for installing roto jme v4 full version
***FLASH ONLY WITH ODIN***
FOR GSM TAB ONLY
Hello,
I installed the CyanogemMod 7.1 on a SGS. Before install, I made a backup of the stock ROM using CWM. But now I want to come back to the Stock ROM, but when I restore the backup, is always giving me error when flashing the boot.img. Could be problems with the filesystems?
Thanks
To move from CM7 to another Samsung rom you have to use odin.
you need to flash a stock rom with 512pit file and tick repartition.
But I cant get to download mode. I used the three finger combination (volumedown+home+power) or the adb reboot-bootloader command and nothing.
If a use the three finger combination, the galaxy-s i9000 first screen appears but it flash and reboot again, and if I continue to press the buttons, it will enter in loop until I release the buttons and cyanogemmod opens normally.
How I restore the download mode screen?
Thanks
Try to pull battery off battery a few seconds
Sent from my GT-I9000 using XDA App
Hi, mate.
It's sad but you lost the three keys combo.
Now, if i don't say wrong, the only method to launch the download mode is to use a usb dongle.
Search the forum with the word "dongle usb galaxy s" and you should find what i'm talking about.
Normally the combo (notice that you can't access to recovery too) lost it self during a downgrade from ginger bootloader to froyo or eclaire bootloader.
Wich means that your bootloader is corrupted.
Hi people,
I bought a USB dongle and now the download mode is working again.
Thanks
Firmware upgrade encountered an issue. Please select recovery mode in kies & try agai
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone
PSYCHOBOY18 said:
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone
Click to expand...
Click to collapse
what have you tried to do to fix this already?
ICS Bad Idea!!!
I wouldnt recommned updating to ICS especially through kies i had my phone stuck at "firmware upgrade encountered an issue please select recovery mode in kies and try again" for 2 days It was a disaster. So i came across a website called http://androidromupdate.com/2012/09...-firmware-upgrade-official-kiesota-stock-rom/
I then downloaded the the I927UCLH2 ICS 4.0.4 Original Stock ROM using ODIN... FOLLOW DIRECTIONS THROUGH THE SITE NOT KIES!! BUT THE ORIGINAL STOCK ROM!
***After you have successfully completed the stock rom with ODIN***
Get a rom from http://forum.jakar.co/android-hack/1345758298/ Choose the ROM called Bio360 its almost the same Replica of Gingerbread its Version 2.3.5
VERY IMPORTANT!! Make sure you put the ZIP FILE (ROM) in your INTERNAL STORAGE NOT THE EXTERNAL!!! (SD CARD SLOT) BIG MISTAKE!!
Go to google and type in "CWM captivate glide new" click the first link beggining with www.theandroidsoul.com........ FOLLOW DIRECTIONS THROUGH THE SITE!
After you have downloaded the Rom (ZIP FILE) and CWM put your phone into Recovery mode by powering off the device. hold power button and the volume down button until you see clockwork recovery, from here you are going to look for install from sd card and look for the zip file/Rom Bio360 and you should be set!
*******THE Bio360 Rom is also Rooted so there is no need to do an extra step************
*** I HOPE THSI HELPS ANY PROBLEMS FEEL FREE TO INBOX ME ANY QUESTIONS*** I WILL TRY MY BEST TO HELP......
Sorry guys wrong post this is for Samsung captivate glide! , my mistake..
Sent from my SAMSUNG-SGH-I927R using xda premium
Firmware upgrade encountered an issue. Please select recovery in Kies and try again
This is for Samsung Galaxy Note 2 (Sprint SPH-L900) Is the website for the stock rom
rwilco12.com
stock rom: [ROM][ODIN][TAR]SPH-L900 MA7 (MA7 Modem/Kernel/ROM - Stock
Odin 3 v 1.85 (You Can Google and find it)
ok sweet so I have done this successfully. i really believe you should put this on ur first post so people dont have to do searching and can feel at ease.
1. Start ODIN 3v1.85
2. Enter Download Mode
a. Power the phone off.
b. Plug the usb cable into the computer (not the phone)
c. Hold both sides of the volume rocker down (vol up + vol down)
d. While holding those buttons down, insert the usb cable into your phone.
It may take a second or two for the screen to display with a warning. Press the Volume UP key to download a custom ROM.
3. In ODIN, click PDA and select the PDA.tar file you extracted
4. DO NOT check re-partition, Flash Lock, Phone EFS Clear, Phone bootloader update
5. CHECK Auto Reboot and F.Reset Time
6. Click Start
At the end of the process ODIN's first block will show up as YELLOW with the words PASS and your phone will reboot.
Unplug USB from your phone after first boot.
It worked for me perfectly you don't have to F.Reset
Perhaps you should try the Note 2 forums for a more informative response?
I have the same problem with my tmobile galaxy s ii, T989
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and whenever I start installing a stock room using Odin 1.85 it force close and the phone stays in the same page saying
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
Please help!
Tried everything I know and still not working
I tried two computers and everytime I start odin it forces stop
The screen is still in Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and I guess this is the download mode because I restarted it with volume up and down and pluged the usb and it turns to this screen
I downloaded odin again to make sure it runs ok and also tried it in my wifes phone and it runs with no problem
It is one of two cases, ether the phone is completely dead or the files I am using to be installed are not the correct ones
I tried the files on this post:
http://forum.xda-developers.com/showthread.php?t=1414341
Please tell me what to do
I really need the phone...
Hi.. I try to install CM10, following the CM wiki.
I installed Semaphiore via Heimdall, alls good, blue bar appear, but at restart, is freezing in Samsung GT-i9000 logo, and is not booting in recovery mode or OS, only download mode.
After that, i try to conect to odin, but is not connecting! ADB same ( but heimdall still work if i want to reflash ).
The developer mode was deactivate before that...
What i have to do? ( actually, is not my phone... )
Thank's!
LEX404 said:
Hi.. I try to install CM10, following the CM wiki.
I installed Semaphiore via Heimdall, alls good, blue bar appear, but at restart, is freezing in Samsung GT-i9000 logo, and is not booting in recovery mode or OS, only download mode.
After that, i try to conect to odin, but is not connecting! ADB same ( but heimdall still work if i want to reflash ).
The developer mode was deactivate before that...
What i have to do? ( actually, is not my phone... )
Thank's!
Click to expand...
Click to collapse
If you can, try to reflash the stock CF-ROOT (2.3.6) version and start over from there
I tried CF ROOT, ité better:
recovery ( but stock recovery )
download mode
and i can see battery charging.
But still don't boot to OS, steel freeze on startup logo
ps. Any other CWM Kernel? to try to reinstall OS.
I get recognized by Odin, but not from download mode, from freeze startup logo
Problem solved Now i can give a healthy Devil SGS and receive a beer for upgrade
I have a Samsung Galaxy Mini and I succesfully rooted it, however it seems to be impossible to add cyanogen to it cause ii need clockworkmod recovery
1. I tried downloading it from the stock loader (on the update from sdcard place thing ) and it will just freeze when it comes to Replacing stock recovery with ClockWorkModRecovery. I have tried severall versions of it, including the one that came from the clockworkmod website but all of them just freeze
2. I tried connecting them to the pc but samsung kies can't see my phone and i can't even find all the files needed to use them on Odin
so what do I do????
MrRootGuy said:
I have a Samsung Galaxy Mini and I succesfully rooted it, however it seems to be impossible to add cyanogen to it cause ii need clockworkmod recovery
1. I tried downloading it from the stock loader (on the update from sdcard place thing ) and it will just freeze when it comes to Replacing stock recovery with ClockWorkModRecovery. I have tried severall versions of it, including the one that came from the clockworkmod website but all of them just freeze
2. I tried connecting them to the pc but samsung kies can't see my phone and i can't even find all the files needed to use them on Odin
so what do I do????
Click to expand...
Click to collapse
First of all make sure you installed drivers in Samsung Kies. After, make sure to have working version of odin. Tried connecting the booting into download and see if it detects it?
MrRootGuy said:
I have a Samsung Galaxy Mini and I succesfully rooted it, however it seems to be impossible to add cyanogen to it cause ii need clockworkmod recovery
1. I tried downloading it from the stock loader (on the update from sdcard place thing ) and it will just freeze when it comes to Replacing stock recovery with ClockWorkModRecovery. I have tried severall versions of it, including the one that came from the clockworkmod website but all of them just freeze
2. I tried connecting them to the pc but samsung kies can't see my phone and i can't even find all the files needed to use them on Odin
so what do I do????
Click to expand...
Click to collapse
Make sure your mini has gingerbread and samsung drivers installed on your pc/laptop.
Before you begin please make sure your battery has at least 70% of charge.
1. Download Odin Multidownloader v4.38 for GTS5570, Tass_v1.ops and Clockwork Mod Recovery v4.0.0.5(tass-recovery-cwm.tar) if you do not have them already. (Attachments)
2. Run Odin Multi downloader v4.38 and select the Tass_v1.ops by clicking OPS button.
3. Select One Package Option and Click One Package button and select the tass-recovery-cwm.tar file you downloaded.
Leave other settings to default (i.e. don’t change any other options/settings)
4. When you are done reboot your phone in download mode (Press Volume Down + Home + Power button to go to download mode)
5. Connect your phone in download mode to your computer via USB Cable.
6. When Odin detects your phone (If you see a com port number written in yellow background at the top left, then your phone is detected. View image.), click Start button.
7. Wait till Odin finishes the job (approx. 3-5 minutes) and when it reports ‘PASS’, you can disconnect your phone.
Go to the recovery mode (Press Home + Power button) and see your new recovery with tons of useful options. Now that you have CWM recovery you will be able to do just more than nandroid backups. You can also partition your sdcard as well as flash a custom rom on your galaxy pop. Go ahead and experiment with various options. But, be careful playing with your device’s recovery is very risky task if you lack appropriate information or skill.
Please help me i want to install cwm on my rooted gts5570 froyo using mobile odin lite..
send from my GT s5570 froyo..
Please any body answer...how to install cwm or upgrade my froyo gts5570 without computer...i have odin mobile lite also installed
send from my GT s5570 froyo..