Database Develop

[Q] Connection problem to odin after stock froyo rom flash

I've read and searched as much as I can but haven't seen anyone else have this problem.
I flashed Froyo XWJP6 using Kies and changing the registry entries and I am generally happy with the rom but I've seen others posted I wanted to try out. My problem is that I have so far been unsuccessful getting odin to connect when I go into the rom download screen (down+home+power). Odin and kies both connect when on the home screen.
I understand that since its Froyo with e3 recovery that update.zip files need to be signed so odin is needed to either install a new rom, install clockworkmod or install a kernel that has e2 recovery.
Is there any way I can get odin to connect or downgrade to e2 recovery without going through odin? Or any other solution to downgrade to 2.1 and start again?
It feels like i'm missing something but I don't have the experience to figure out what it is.
Any help would be much appreciated.
Pete

This happens to me every now and then as well.What I would do is to re-install the samsung usb driver in my laptop. After that, odin sees my phone again in DL mode.
Sent from my GT-I9000 using XDA App

Make sure you're connecting in the right sequence for odin.
- start odin with phone unplugged
- boot phone into d/l mode
- connect phone to pc via usb

thanks very much for replying. I tried a different computer and it seems to be a dodgy usb port/driver problem on my works computer I had tried originally.

[Q] Rooting galaxy s with gingerbread 2.3.3

I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?

Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?

Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.

samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app

I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.

caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app

afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.

Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.

elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated

Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!

Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!

good you figured out

Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys

rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.

[Q] Captivate Soft Brick - Need a rooted Odin solution.

Hi
My brother (a no-geek) has a captivate, and lives in a different city (I donot have physical access to the phone). He visited me few weeks ago and I installed CM-7 on his phone, i know my bad. Some of his videos were not working, so i asked him to update to the latest CM-7 build. He download the build, saved it on int sd_card and used ClockWork Recovery to install the selected ROM. Upon reboot it entered in never-ending splash screen. I found couple of odin ROMs, and posted him link, we tried to flash them, but no good.
Status --
The COM ports are detected, but the process at times halts at <SET PARTITION> at times at <SET UP>... at times all thread completed successful would show up as soon as hitting START.
I dont have a captivate, can someone please suggest a sure shot solution and post me a link for ODIN, with a root rom. I am using Team Whiskey on my Vibrant, and I prefer stable modified ROM because of its features and power.
I can explain him the process on skype using desktop sharing, but the ROM should be good. Thankyou very much in advance.

if he can access recovery, try wiping everything thru recovery then start again

Phone is in Soft Brick state.
Phone is in Soft Brick state. So i cannot boot into the phone and go to CW recovery.

What he needs is just a stable usb connection that's how he got to this point, bad communication between the phone and computer. On cm7 I beleive you need the nexus s drivers installed. Also make sure it's plugged into a usb port that's attached directly to the motherboard (back of pc, port 1 on laptop)

@studacris
I think the drivers are already installed good. The connection is also good, as i can the COM port detection in the ODIN, with one of the boxes changing its colour from NO-COLOUR to YELLOW-COLOUR.
I think the ROM builds are not good. They go action-less during flashing, actually nothing (progress bar) comes on phone, it keeps showing the Downloading screen, endlessly. Odin usually is stuck at at <SET PARTITION> at times at <SET UP>...
Can someone post a link for a test one click odin. Well i would prefer one click.

You did try DG's JF6 one click, thats the only one I use, how are you establishing dowload mode on the phone or are you even doing this.

REMY4223 said:
I would suggest to Odin back to stock then update to Froyo via Kies.
Click to expand...
Click to collapse
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament

Ragin Caucasian said:
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Click to expand...
Click to collapse
+1 If you read the OP the problem is he can't flash back to stock he is having problems flashing anything period, @ the OP correct me if I'm wrong but I have a strong hunch that you are leaving out some pretty crucial steps, I have a feeling that you are not putting the phone into download mode, I also believe that you are gonna need to make a jig and pay a visit to your brother to help him out especially if its bricked the same way mine just was flashing with cm7 roms. But if you are getting a com port to show without having to put in download mode then you are farther along in the boot process. If this is the case you may be able to adb into recovery do a full wipe excluding /boot and reflash. Will the PC recognize the phone with it in its current boot locked state? If so then recovering should be somewhat of a breeze.
http://forum.xda-developers.com/showthread.php?t=829392 read this post it may help otherwise there are tons others

- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.

viveksharma2108 said:
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
Click to expand...
Click to collapse
Try putting the phone into download mode after you open Odin. Which version of Odin is this? Also, installing the nightly build of CM7 again often fixes the boot loop on the newer builds. I would try that if you can get to recovery.
Sent from my SGH-I897 using XDA Premium App

[i9000b] BSOD - Phone ! Computer Screen

I had Android 4.0.3 (IceCream Sandwich) on my Galaxy S GT-I9000B (I did install it through Odin, nothing went wrong), but is was laggish (too much for it to handle, I think) and after a few months, I decided to roll it back to 2.3.3 (Gingerbread).
I started the process to install the firmware through Odin3 v1.85 - the file I download (from sammobile.com/firmware, had only one file that I used on the PDA space.
Odin recognized my phone and I started to install it, but after a while my phone was stuck on the downloading screen (2 hours of installation, I tought that something went wrong).
I then turned my phone off to try and install again, but when I turned it on, there were a Phone - exclamation mark - Computer Symbol.
I can get it to dowlonad mode (Volume Down+Home+Power), but when I plug it to the pc, it says "unknown device" and it can't find drivers for it.
I think I have the latest drivers from Samsung (I had from Kies and I re-downloaded a file somewhere from this forum named SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0.exe).
It appears that since windows can't install the drivers, Odin doesn't recognize the device - it was recognizing it before, when I was installing the firmware.
Now I'm stuck - I tried anything I saw in this forum and in other places - I did even pray for a miracle, but it didn't work
I know that there must be a way, but I don't know how.
Before I forget, I'm using Windows 7 Ultimate x64.

If you can get it in download mode everything should be fine, I've had a problem like this, my pc couldn't see the phone in download no matter what. Try to use another USB port, better another PC. Also I've heard that x64 doesn't get along well with Odin. If possible you can try Linux and Heimdall, after all Android is Linux too.

KainFromNod said:
I know that there must be a way, but I don't know how. Before I forget, I'm using Windows 7 Ultimate x64.
Click to expand...
Click to collapse
Ok, k4Z3666, has given you a starting point...the phone is still in download mode but without a booting ROM, so its OK, the problem is your PC, USB cable or USB port. If you want to be quick about it, just try on a lap top..if not a simple Reboot of PC ( after removing power cord) and Phone (after a battery Pull), and a switch to a different USB port at the back of PC can solve this for some...for other solutions try these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 anything else you may need can be found on My Android collections., link below

k4Z3666 said:
If you can get it in download mode everything should be fine, I've had a problem like this, my pc couldn't see the phone in download no matter what. Try to use another USB port, better another PC. Also I've heard that x64 doesn't get along well with Odin. If possible you can try Linux and Heimdall, after all Android is Linux too.
Click to expand...
Click to collapse
I tried other USB Ports and also rebooting. It was working just fine - it seems like a driver problem to me.
My notebook is dead, but I'll try using someone else computer.
Does Odin runs in Windows XP? I might try it in my virtual box - I doubt that it will work, but it is the best thing I have to do untill tomorrow.

I got it working in my mother's notebook - should I try something different? I only have the PDA, should I try a PIT?
I don't know what those do, but I read somewhere that PIT is used to recover bricked phones.
EDIT: I installed only the PDA, it worked fine on the 2nd time (first time, it got stuck but I could make it work changing the usb port and cable).
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?

KainFromNod said:
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
what ROM did you use? Did you do any wipes?
Opps..you got an i900B, so make sure you are only using I9000B ROMS as i9000 is not compatible with your phone
Follow guidelines from here
http://forum.xda-developers.com/showthread.php?t=919219
http://forum.xda-developers.com/showpost.php?p=22941192&postcount=300

KainFromNod said:
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
Assuming that you're on the right rom for your phone can you enter recovery mode? Try reinserting battery, and enter recovery with [vol+, menu button, power on]

KainFromNod said:
I got it working in my mother's notebook - should I try something different? I only have the PDA, should I try a PIT?
I don't know what those do, but I read somewhere that PIT is used to recover bricked phones.
EDIT: I installed only the PDA, it worked fine on the 2nd time (first time, it got stuck but I could make it work changing the usb port and cable).
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
Yep if u want to back to stock u need pit file because ICS use different system file
Why u don't like ICS ? Its way better and faster than sammy ROM even its more stable , I think u should try it again with devil kernel with oc to 1.2 it will fly u can add some live oc which will give more fluidity
Sent from another galaxy powered by CM10 & Syiah

Ok, I'm posting it here just to leave a reply and reference for future generations, as my problem was solved.
xsenman said:
what ROM did you use? Did you do any wipes?
Opps..you got an i900B, so make sure you are only using I9000B ROMS as i9000 is not compatible with your phone
I used a firmware from my country (available here: sammobile.com/firmware/?page=3&model=GT-I9000B&pcode=ZTO&os=1&type=1#firmware) and I wiped the cache (I'm not sure what this means, but I believe it is the 2 options on volume up+menu+power)
Follow guidelines from here
http://forum.xda-developers.com/showthread.php?t=919219
http://forum.xda-developers.com/showpost.php?p=22941192&postcount=300
Click to expand...
Click to collapse
k4Z3666 said:
Assuming that you're on the right rom for your phone can you enter recovery mode? Try reinserting battery, and enter recovery with [vol+, menu button, power on]
Click to expand...
Click to collapse
I was entering recovery mode, but it was giving me some error when I tried to wipe the 2 things that I forgot the name =/
yahyoh said:
Yep if u want to back to stock u need pit file because ICS use different system file
Why u don't like ICS ? Its way better and faster than sammy ROM even its more stable , I think u should try it again with devil kernel with oc to 1.2 it will fly u can add some live oc which will give more fluidity
Sent from another galaxy powered by CM10 & Syiah
Click to expand...
Click to collapse
ICS wasn't faster here - it was laggish and always crashed some common apps (gallery, music player). I believe that the firmware wasn't completely "done" as it was being adapted from another version (my phone is brazilian) and some functionalities that it has (i.e. digital TV) wasn't available.
What I done to correct the boot was simple (I found a tutorial in a brazilian site, so it had all the roms that I needed).
1) Used a PIT and a stock rom to get it back to factory version;
2) Upgraded to Froyo (original) - That was kind of a mistake, the tutorial said to do it because then KIES would update it automatically to Gingerbread. The phone was fully functional, but KIES said that it couldn't update it (it recognized the phone and everything).
The tutorial stoped there, but since I had the ROM, I used Odin to install Gingerbread (the one that was looping) and it was done.
Now I need to remember how to root it because there are some dumb apps who can't get away (i.e. Orkut app, some demo games).
Thank you all for the help!

KainFromNod said:
I was entering recovery mode, but it was giving me some error when I tried to wipe the 2 things that I forgot the name =/
Click to expand...
Click to collapse
From recovery you can always try to flash another kernel, that would probably resolve things too. Anyways the problem's solved, glad to help

Galaxy S Os upgrade questions.

Searching the forum constantly, but I figured I'd ask at the same time.
Heres what i have:
Galaxy S
Rooted
Froyo 2.2
Baseband I9000UGKC1
Kernel 2.6.32.9 [email protected] #4
Buikd FROYO.UGKC1
I've Rooted and Unlocked. I require UNLOCK.
I'd like to upgrade my OS to either JB or ICS whichever is the most stable and smooth. (I'm looking for iPhone smooth.)
I think I'll use Cyanagenmod and Clockwork recovery.
Will This remove my unlock? If so. Is there a way to unlock ICS or JB?
Suggestions, Tips please.
Thanks a bunch.

Liquyd said:
Galaxy S
Rooted
Froyo 2.2
Click to expand...
Click to collapse
First backup your important files to your PC than you must first upgrade to gingerbread 2.3.6 only than you should and can flash ICS and after that JB. you can do the gingerbread upgrade by using KIES or ODIN, and flash again with a semaphore kernel which will give you CWM + root using Odin, after that backup your EFS before flashing ICS using CWM and finally JB with CWM

Thank you. Didn't realize I had to go gingerbread first. Could have ended badly...
By re flashing I lose my unlock. Yes?
There is a way to unlock in JB?
Thanks again.
Sent from my GT-I9000M using Tapatalk 2

Liquyd said:
Thank you. Didn't realize I had to go gingerbread first. Could have ended badly...
By re flashing I lose my unlock. Yes?
There is a way to unlock in JB?
Thanks again.
Sent from my GT-I9000M using Tapatalk 2
Click to expand...
Click to collapse
No, you won't lose your unlock, Read your wiki page for guidance http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series

Sorry for the late reply. I've been fighting for two days with Kies.
I can't get my phone to connect with it.
I believe its a driver issue.
I can let windows find the driver. Phone then is recognized by windows. But doesn't connect to kies. I get an error message.
Tried following the troubleshooting guide in Kies. It installs driver. No connect.
Went to Samsung for driver. No go with Kies again.. I get a message from windows saying my device can perform better using a usb 2.0 port. I was on a 2.0 port.
Got a driver from xda wiki. Same results.. I cannot get kies and my galaxy to work together.
Tried different usb cable (official Samsung). And different USB port.
I'm lost...
**Update**
I just tried on an XP machine. Same thing. 'can't connect to device, please disconnect and try again'...
Should i try a factory restore and start over from the beginning?
Sent from my GT-I9000M using Tapatalk 2

Liquyd said:
Should i try a factory restore and start over from the beginning?
Sent from my GT-I9000M using Tapatalk 2
Click to expand...
Click to collapse
just uninstall KIES, leave the USB drivers, and connect with ODIN to flash a gingerbread 2.3.6 ROM according to your region from here http://forum.xda-developers.com/showthread.php?t=1102881 than root with a semaphore kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 , you will also get CWM with this kernel.
No use wasting time trying to get KIES to work, this is happening to a lot of people , could be due to Microsoft's competition with Samsung. you can get all your softwares , tools etc from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775

xsenman said:
just uninstall KIES, leave the USB drivers, and connect with ODIN to flash a gingerbread 2.3.6 ROM according to your region from here http://forum.xda-developers.com/showthread.php?t=1102881 than root with a semaphore kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 , you will also get CWM with this kernel.
No use wasting time trying to get KIES to work, this is happening to a lot of people , could be due to Microsoft's competition with Samsung. you can get all your softwares , tools etc from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
Click to expand...
Click to collapse
Followed Instructions... Got stuck in boot loop.
now
Phone ! PC image....
Did I Brick it? I could access Download mode. Tried recovery. now I have the Phone ! PC screen...
appreciate any help now... I'm without a phone.

Obviously, your flashing process was interrupted.
First of all, did you backup your data?
2nd, Go to Download mode (Power + Home + Volume Down) then reflash Gingerbread via ODIN.

Liquyd said:
Followed Instructions... Got stuck in boot loop.
now
Phone ! PC image....
Did I Brick it? I could access Download mode. Tried recovery. now I have the Phone ! PC screen...
appreciate any help now... I'm without a phone.
Click to expand...
Click to collapse
Nope, not bricked, Did this happen after you flash ROM or after you flashed the semaphore kernel? anyway...
1) reboot PC as well reboot phone after a battery pull, also take out SIM Card as well as your EXT SD card , reisert battery after pressing power button for a min
2) make sure you had uninstalled the KIES only leaving the Samsung USB drivers
3) go into download mode and flash again the ROM as per instructions on that page.
IF not you can use a i9000 rescue or resurrection kit from http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 , has guides there too
BTW make sure you have good battery charge at least 50% before you flash and never interrupt flashing process

xsenman said:
Nope, not bricked, Did this happen after you flash ROM or after you flashed the semaphore kernel? anyway...
1) reboot PC as well reboot phone after a battery pull, also take out SIM Card as well as your EXT SD card , reisert battery after pressing power button for a min
2) make sure you had uninstalled the KIES only leaving the Samsung USB drivers
3) go into download mode and flash again the ROM as per instructions on that page.
IF not you can use a i9000 rescue or resurrection kit from http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 , has guides there too
BTW make sure you have good battery charge at least 50% before you flash and never interrupt flashing process
Click to expand...
Click to collapse
Thank you so much! Without your help. I'd be knee deep in threads and various topics that made no sense to me.
It was battery.. I gave it a full charge and tried again. Worked. Sorta... Still had a boot loop after flashing GB. Got fed up and hit restore. Upon reboot. GB was there... Flashed sephamore with 0 issues. Running like a charm.
One last thing. Is ICS worth it if GB is working fine? I mean what are the benefits of ICS over GB? My friend swears by ICS on his RAZR should I worry about it on my 9000M?
Big thanks again. Cheers! :good: