Related
Hi, I cleaned the screen of my HTC Diamond with a bit of alcohol and a pice of tissue and it seems that the alcohol got inside of the Power button. Now, every time I try to turn the screen on by touching the power button, it turns the screen on but it dispays a message that says: "Warning: Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
If I click YES, it reboots the phone, If I click NO, then its ok. That is fine, but the problem is when I want to turn the phone off. It's impossible. It will keep trying to reboot.
Does anybody know what can I do? I am really worried.
One solution could be to make some other button from the phone to act as the power button (like the Home button that is rarely used). How can I do that?
Please help!!!!
Thank you
Hi,
I have the same problem.
Did you already find an answer ?
No, I didnt find the solution. I tried to fix the hardware but didnt succeed. So, I created a dummy file to emulate the poweroffwarning.exe that pops up when you long press the power button.
Solution
Hello, I have one AT&T TITL 8925 that upgraded to Windows Mobile 6.5
After the new software was loaded I saw same behavior on my phone.
When the phone is ON and I pressed the power button sometimes it do not respond, and others I received the warning message "power will be turned off and you may lose data if you have not saved them..." My first tought was that it is because the processor is slow to this new software release, or maybe my phone is damaged. I was working perfectly with previous (light version) release so my final guess is that this sw requires more uses of the processos.
Anyways what I have been doing is before turing it off I press the red button or hang up button, and after this if I press the power button it works fine (No more warnings). I have some theories but I will keep doing the same
Hope this partial solution helps you as it does for me.
Regards
Jerry
this is not working for me :| the problem is i can't use my power button not even to open my display when it goes to sleep :|:| i don't know what to do guys please help me
You can use the Stylus to awake the phone, instead of using the power button. You can also use TouchLockPro, to suspend the device, so you do not need the power button for that too.
Also you can set the phone to awake on pressing any key (Windows Mobile Setting), but be sure to have a good locking tool, which makes sure you do not have bogus calls and it goes to sleep again fast enough, otherwise it will drain battery.
I have the same problem.
Anyone solved this one?
I have the same issue and this is not a hardware problem. Strange since even updates/changes of the rom do not correct the issue. Did anybody find a solution for this...?
Well.. ive had this problem just ones.. I was walking downtown with my diamond in the frontpocket of my jeans (face down), after about 3min. of walk, it started to rain (big drops), and my clothes got completely wet, i turned around emidietly, to walk back to home. When i got home after 3 more min. i layed the phone on the table, and then i could hear there were somethibg wrong.. The "turn off" sound came, and the notification kept on coming up, even though i pressed No, as if i were just holding the power button down.. Then i began to press the power button continuesly for about a 100 times, and to my surprise then it stopped and have functioned perfectly for about 2 month now.. Something tells me theres some serius promlem with the smallest kind of moisture near the power button on this phone..
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
Hi! on one of my diamond, the power button off from the board. So the black little board with the button itself is not part of the complete circuit anymore... if someone know the hw testpoint for that it would great please.... i see a few TP around, but if i just start sorting them i just going to kill it...I use to flash phones with TP so is not new for me , but i find nothing for diamond.
I have a similar issue. Mine seems like it is almost stuck on, so it wakes its self up all the time, meaning a full charge lasts an hour or two. Then when it runs out of battery it tries to switch itself back on, so goes through a continuous cycle of vibrating and beeping until the battery is removed. The gf finds it very annoying at 3am lol.
Don't recall mine getting wet, but it's possible it could have got damp at some point, but it's been doing this now for about 3 weeks.
Tried a hard reset with no luck.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
2004mark said:
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
Click to expand...
Click to collapse
I think I should send it to HTC, and ask them to do it. Or go to a repair centre. But I should not try it myself, because it can be dangerous for the diamond.
Also try searching on ebay, there might be the parts you could use.
Good luck!
is there a way to remap the power button?
my diamond face same problem since this afternoon, arrrrgghhhh!!!
- blocking hwbutton1, hwbutton2, hwbutton3, hwbutton4, hwbutton5, hwbutton6, hwbutton7 >>>> NO LUCK
- hard reset >>> NO LUCK
guys, any of you solved the problem yet
youtube.com/watch?v=Q4SEQ6AUFOI
My Sony X1 have some strange problems with the power button. When it goes into sleep mode, I can not wake it up with the power button, all I can do is to soft reset. Sometimes it does not go into sleep mode either , it just "wake up" all the time. I don't know what's wrong with it, tried Hard reset but no use .
ANyone had this problems before?
@
The only way to solve this is to leave the phone near your laptop heat vent ( fan) . hot air from it might help you to get the power button up and running. But if that to doesn't work then i'm afraid thats bad.
Current sol :
1. download SU2U ( search threads )
2. go to the settings and make the " lock when stylus inserted" option ON
3. Change the screen turn off time to 5 secs..
So , to unlock , remove stylus , to lock -> insert it back ( its turns off the back light within 5 sec )
Less annoying
elektros said:
youtube.com/watch?v=Q4SEQ6AUFOI
Click to expand...
Click to collapse
thanks for this link, i accidentally tear off my power button flex. now i could turn it on again. Thanks elektros
This morning i was using my phone every thing was good and all the sudden this message came up it said my internal memory was full
when i checked it it said its 96 mb out of 96 mb
and when i went to my documents it had no folders excpet for pictures and music
so basiaclly my internal memory went missing and i am not talking about storage memory.
Then i soft reset it and it got stuck at the green screen and even if it goes to the the next screen it just gets stuckk. I cant get it to hard reset i
have treid to do everyyy single thing searched on google watched videos on it its not doing it. Also i have not downlaoded any thing illeagal or
any thing. Also i bought this from some one and it was brand new but i forgot to ask him for warranty and he didnt give me any paper work so does htc sell their phones with like warrantty or some thing??
also if like i try to use a rom on it thats made by like you guys how do i install that??
because my phone doesnt go past windows mobile screen ???
Thanks Guys
You said you can't get it to hard reset?
Did you do it following these instructions: http://wiki.xda-developers.com/index.php?pagename=Diamond_HardReset
NOTE: you will lose all your settings, contacts etc.
i have done every thing to hard reset but i cant
becuase my device gets stuck at windows mobile screen
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons "aka the center button" , then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:
but it says when the device turned on my device gets stuck at that screen but i have tried like every thing
i press and hold volume down and enter and then i press reset button then i release reset button and once the phone starts it goes to diamond screen and those little numbers at the bottom of screen come up.
First, do you have insurance through your carrier? It doesn't matter where you bought it if you have this.
Second, there is another way to hard reset phone besides those instructions. Sprint Customer Care had to walk me through that, different that what is in manual.
Last resort - HTC should cover within one year, they know the age. Call, maybe "gift" (forgive me for suggesting lying, but I have done that when I can't find receipt). I have had phones covered, it has to be sent in to be replaced, a pain, but probably last resort.
yesterday my tytn2 started to act crazy, i didn't drop it or installed any new software.
the screen started to turn on on his own, front buttons stopped working accept the center button witch now opens the start menu.
when i open the keyboard the fn light is on and the keyboard doesn't work.
when i write the sms message trough touchscreen the backspace isn't working so i can't delete misspelled words.
the photo button and power button on left side still working fine.
all the applications work fine, and i can make calls trough touch screen.
i can't make hard reset because front buttons wont respond.
is anybody had similar problems or have the solution.
my guarantee is gone so i hope this is software problem.
Try doing a battery pull and letting your phone sit like that for a minute, put the battery back in, and see what happens...
It sounds like you have water damage to your phone, though. Every take it in the bathroom with you while you shower? The steam in the air is a sure fire way to get water damage, and it will take time to show, but eventually circuits rust and stop working and you end up with a lot of random problems, and usually all of a sudden you have a lot of major problems.
well, i can't remmeber that i had carry it in the bathroom while showering.
i pulled out the battery, waited for about 5 mins and when i put it back nothing has changed. thanks for the tip.
is there a way to do a hard reset without pushing the front buttons?
konch said:
well, i can't remmeber that i had carry it in the bathroom while showering.
i pulled out the battery, waited for about 5 mins and when i put it back nothing has changed. thanks for the tip.
is there a way to do a hard reset without pushing the front buttons?
Click to expand...
Click to collapse
look in the wiki for a detail of all the ways you can perform a hard reset (i believe there are at least THREE ways)
METHOD 1: the one you are looking for (because your buttons don't work) can be triggered by going to Settings->System->Clear Storage (assuming your phone still boots up and the touchscreen is usable)
METHOD 2: when the phone is POWERED OFF:
1. stick the stylus in the soft reset hole and hold it there
2. hold down the two soft keys
3. press the power button
if you try METHOD 2 and if it works, then you can safely assume that your soft keys are working and that it is indeed a software issue.
i used METHOD 1 and did a hard reset.
nothing has changed, front buttons and keyboard still refuses to work.
unfortunatly it seems it is a hardwer problem so i'm going to take it to the service.
thank you for helping me.
ok so i've been using it a bit but my battery was 70% last i checked. was playing around with throw and just opened youtube and the screen flickered a bit (black lines) then decided to go black completely.
nothing i do will make the screen do anything.
holding the power button for ages (usually the way to turn off/reboot a phone) doesnt do anything. the backlight is on as i can see that. but nothing is on the screen.
anyone got any ideas on how to force a shutdown/reboot on these?
thefunkygibbon said:
ok so i've been using it a bit but my battery was 70% last i checked. was playing around with throw and just opened youtube and the screen flickered a bit (black lines) then decided to go black completely.
nothing i do will make the screen do anything.
holding the power button for ages (usually the way to turn off/reboot a phone) doesnt do anything. the backlight is on as i can see that. but nothing is on the screen.
anyone got any ideas on how to force a shutdown/reboot on these?
Click to expand...
Click to collapse
IIRC the Xperia Z1 has a hard reset button under the sim flap, it's a small red button, give it a shot.
remove sim card and sd card and try again, if it's still not responding do an update repair using SUS or PCC
BTW there is a known fault with the XZU and it could also be on the Z1 as they use similar Firmware, what people have found is that the phone will start up eventually and then they go into the display setting and untick the auto backlight option and that fixes it
I also reboot my Z1in this way when it blackout.
Sent from my C6902 using xda app-developers app
Had the same issue called Sony, push hard reset button all is fine in the world. Known issue Sony is working on it
Sent from my C6903 using Tapatalk 4
Managed to hard reset using power and up volume .
Put it on charge overnight but it doesn't see,m to have taken any charge at all....just trying again using diff PSU and cables but it doesn't want to charge. It recognises that I've out a cable in as I played with the smart connect setting. When it is off completely I get a red light (presumably meaning its charging ) but not in android
Any ideas?
Got it charging again by pushing the red button near sim slot for a couple seconds.
Just had another issue with SD card not being recognised after I removed another (/safely) had to reboot again using power plus vol up as it stuck on the shutdown logo when I tried to power down'...
Wow I can't believe the amount of issues I've ran into within 24hours of having this thing. I really don't know what to do...return it because it sounds like a faulty device (but all the issues are seemingly unrelated) or return and get another phone (is anyone else getting problems like I am?)
Sometimes phones have issues. I got one once that had no speakers or Mic inside... it happens lol
Try to go exchange it, and see if the next device gives you issues.. if not then you're good, if it does pick a different phone..
Do it soon though, most carriers only have a 14 day exchange period, and then after that will charge you all sorts of fees and try to fix your phone rather than just giving you a new one....
Sent from my 16GB Blue Verizon Galaxy S3 running MIUI v5 with KT kernel
thefunkygibbon said:
Got it charging again by pushing the red button near sim slot for a couple seconds.
Just had another issue with SD card not being recognised after I removed another (/safely) had to reboot again using power plus vol up as it stuck on the shutdown logo when I tried to power down'...
Wow I can't believe the amount of issues I've ran into within 24hours of having this thing. I really don't know what to do...return it because it sounds like a faulty device (but all the issues are seemingly unrelated) or return and get another phone (is anyone else getting problems like I am?)
Click to expand...
Click to collapse
sounds like a similar problem I had with my 64gb SD card - as I mentioned above remove all cards then start from there - a reflash of the firmware might help also
thefunkygibbon said:
ok so i've been using it a bit but my battery was 70% last i checked. was playing around with throw and just opened youtube and the screen flickered a bit (black lines) then decided to go black completely.
nothing i do will make the screen do anything.
holding the power button for ages (usually the way to turn off/reboot a phone) doesnt do anything. the backlight is on as i can see that. but nothing is on the screen.
anyone got any ideas on how to force a shutdown/reboot on these?
Click to expand...
Click to collapse
Something happened to mine with Youtube too. I'd started a video and paused it on a frame for comparison with another screen. While I was setting the other phone up, the screen on Z1 timed out. I pressed power, the screen come on and flickered, then went black!
Power and both volume keys function the same as the red button under the flap. I wasn't able to reproduce the bug.
LadFromWales85 said:
Something happened to mine with Youtube too. I'd started a video and paused it on a frame for comparison with another screen. While I was setting the other phone up, the screen on Z1 timed out. I pressed power, the screen come on and flickered, then went black!
Power and both volume keys function the same as the red button under the flap. I wasn't able to reproduce the bug.
Click to expand...
Click to collapse
yeah i've been trying to reproduce it and failing to. very odd. maybe its something to do with the first time you use youtube and do something specific?
gunna phone o2 up tomorrow and see what they say about all my issues. seems to have been fine this last 24 hours though and in their eyes that is prob reason enough not to issue a replacement.
I've had mine since Monday and this happened to me yesterday. I was troubleshooting sending MMS with T-Mobile tech support (not a phone issue as it was happening on previous phones too) and had to restart the phone several times. I noticed upon restarting that the backlight seemed to be on but the phone was not booting up. Had to perform several hard resets (both with the red reset button as well as the power/volume up buttons) before it FINALLY rebooted and stayed on. While trying to figure this out I ran a Google search to see if others were having this problem. One solution was to make sure the backlight option is checked. I had been messing with settings the night before and must have unchecked it. Since I rechecked it I haven't had the same issue.
I just rooted my turbo with Moforoot and it's been O.K. yesterday except the fact that i couldn't install xposed after hours upon hours. I was tired and decided to sleep and my phone fell off my bed and this morning it was dead although the battery was alright. I have a case on my phone and i've dropped it other times. It is also noteworthy saying that today i FELT as if my power button was sort of permanently jammed in my phone - it feels like the power button doesn't come out as much as it should- .
Main concern: my phone has been freezing every so 7-10 minutes after turning it back on, even after deleting and undoing everything that I had done since the day I rooted my droid.
Second Concern: I'm not sure whether my droid's power button normally came with a somewhat deep power button. If anyone can, can you check to see if, when you push in your power button, whether or not the button gets pushed PASSED the phone as in it gets pushed into the phone, unlike the volume buttons. Thanks guys. This problem has made my weekend quite hectic.
It is also worth noting that my phone has had no problems before, so it is fair to conclude that this problem is either due to the rooting, the tampering, or the dropping of the phone.
If anyone would be so generous and would post a video of them pushing their power button, that would be of great help too. Thanks everyone.
-Qarie
Hey - saw your post - I also rooted recently. Separately, was also critical of the right side buttons on a naked XT1254. They are too easily engaged, pocket-pressed or could be "over-pushed" or jarred in a drop.
Buttons: Put your naked phone in a good case that has its own buttons that overlay those on the phone. I use a Tudia hard case. It's bit thick & heavy but the Tudia's buttons take some pressure to push & cannot be pocket-pushed. The case's buttons balance the too-soft touch on phone's buttons nicely. Totally solved over-pushing and no more pocket-pushes.
Root:
I had a couple of crashes post-root too, but tracked it down to a SU conflict between AirPlay and AirAudio BT streaming music or vids from GMusic or DoubleTwist on android>Apple TV>hifi system. Problem solved, gave SU access to AirAudio and took it away from AirPlay and all's right since. Be cautious which apps get SU access and which do not. If your phone crashes, besides a regular restart w/ power button, consider a hard restart pressing screen + both volume buttons at same time. See if the ensuing rooted restart makes the phone behave. It did for me and I've had no probs since. Root freedom has its price! Good luck.
--------------------------------
It is also worth noting that my phone has had no problems before, so it is fair to conclude that this problem is either due to the rooting, the tampering, or the dropping of the phone.
If anyone would be so generous and would post a video of them pushing their power button, that would be of great help too. Thanks everyone.
-Qarie[/QUOTE]
bookman888 said:
Hey - saw your post - I also rooted recently. Separately, was also critical of the right side buttons on a naked XT1254. They are too easily engaged, pocket-pressed or could be "over-pushed" or jarred in a drop.
If your phone crashes, besides a regular restart w/ power button, consider a hard restart pressing screen + both volume buttons at same time.
-Qarie
Click to expand...
Click to collapse
[/QUOTE]
Unfortunately, my power button was "over-pushed" in a drop (putting phone in pocket with gloves on, missed the pocket...oops phone managed to land precisely on the power button) and no longer works. The button is now limp/loose and no longer makes any "clicking" tactile response when pressed. Obviously it does not control the power anymore. I have been afraid to take it into Verizon as there is some clear physical damage near the power button and I am sure I will need to pay to have it warrantied. I wish I would have seen your advice to put it in a case that protected the buttons before it was too late!!
I just wanted to reiterate your point and also ask a follow-up question about your hard restart advice? I have never heard of this method before (pressing screen/both volume buttons). I am a habitual resetter of my devices as I feel like starting with a clean slate always makes them run faster, but unfortunately can't do this anymore unless I let the phone run out of battery completely (which is pretty much impossible with this unit LOL).
Thanks in advance.
I just wanted to reiterate your point and also ask a follow-up question about your hard restart advice? I have never heard of this method before (pressing screen/both volume buttons). I am a habitual resetter of my devices as I feel like starting with a clean slate always makes them run faster, but unfortunately can't do this anymore unless I let the phone run out of battery completely (which is pretty much impossible with this unit LOL).
Thanks in advance.[/QUOTE]
I'm not sure what your question is. I discovered 3 button method of reset and found it worked. Had a few crashes the first days post root but since all's well. Zero crashes in 2 weeks. . Not expert enough to tell you why is works, it just did in my case. If you're apprehensive about verizon repair, find a local phone tech, it shouldn't be that tough or costly to replace a power-on button. Then buy a good case!
bookman888 said:
I'm not sure what your question is. I discovered 3 button method of reset and found it worked. Had a few crashes the first days post root but since all's well. Zero crashes in 2 weeks. . Not expert enough to tell you why is works, it just did in my case. If you're apprehensive about verizon repair, find a local phone tech, it shouldn't be that tough or costly to replace a power-on button. Then buy a good case!
Click to expand...
Click to collapse
I am wondering what exactly this three button method is? I am not rooted so it might not work for me (scared to root with the broken power button! thanks for the advice re: local phone tech, I will look into that), but how does it work? Where do I press on the screen, etc? If you could give me a step by step it could prove very helpful.
Thanks.
jfrostad said:
I am wondering what exactly this three button method is? I am not rooted so it might not work for me (scared to root with the broken power button! thanks for the advice re: local phone tech, I will look into that), but how does it work? Where do I press on the screen, etc? If you could give me a step by step it could prove very helpful.
Thanks.
Click to expand...
Click to collapse
=====================
If your power button is toast, then this is not going to work, but if the power button is functional...
In any screen, just hold down Power + VolUp + VolDown simultaneously for about 3 to 5 seconds or until the phone goes dark.
Then release all 3 buttons and the phone will restart itself in a few seconds with the usual DROID animation screen. No need to press Power-on again.
I'm not a tech but suspect this kind of restart clears a few caches and the phone should run normally on restart, rooted or not. I've done this about 4 or 5 times with no issues. This method will also work if an app "freezes" the phone. It's just another way to restart. Let me know if it works out for u.
bookman888 said:
=====================
If your power button is toast, then this is not going to work, but if the power button is functional...
In any screen, just hold down Power + VolUp + VolDown simultaneously for about 3 to 5 seconds or until the phone goes dark.
Then release all 3 buttons and the phone will restart itself in a few seconds with the usual DROID animation screen. No need to press Power-on again.
I'm not a tech but suspect this kind of restart clears a few caches and the phone should run normally on restart, rooted or not. I've done this about 4 or 5 times with no issues. This method will also work if an app "freezes" the phone. It's just another way to restart. Let me know if it works out for u.
Click to expand...
Click to collapse
Got it. Ya, I guess that won't work for me - I got confused because earlier you said "press screen" so I thought perhaps that might just be the phone screen itself (not the power button). I will look into a local phone tech, this is getting ridiculous!
Workaround . . .
Qarie said:
I just rooted my turbo with Moforoot . . . today i FELT as if my power button was sort of permanently jammed in my phone . . .
Click to expand...
Click to collapse
jfrostad said:
Unfortunately, my power button was "over-pushed" in a drop (putting phone in pocket with gloves on, missed the pocket...oops phone managed to land precisely on the power button) and no longer works. . .
Click to expand...
Click to collapse
Just FYI, I'm using an app+widget called Power Toggles (link below) that offers on-screen tap functions, including power, for rooted devices. The widget bar is customizable, to include adding a button that will give you pretty much all options for restarting your phone: Power off, Reboot, Reboot to Recovery, etc. You have to scroll way down the "Add" list to find the power-related buttons, but there's a "master" button that provides several options on pop-up.
I believe it could serve as a good temporary (or permanent) workaround for a broken power button, as long as the phone is never actually turned off ('cause then you really would need a working power button).
There may be other apps that do some of the same things, but I've been using P.T. for a month or more and I'm extremely happy with it. Here's the app info (browser link):
https://play.google.com/store/apps/details?id=com.painless.pc
( PS: I don't have a Turbo yet, I'm just browsing the forum for info. )
Moondroid said:
Just FYI, I'm using an app+widget called Power Toggles (link below) that offers on-screen tap functions, including power, for rooted devices. The widget bar is customizable, to include adding a button that will give you pretty much all options for restarting your phone: Power off, Reboot, Reboot to Recovery, etc. You have to scroll way down the "Add" list to find the power-related buttons, but there's a "master" button that provides several options on pop-up.
Click to expand...
Click to collapse
Thanks for the helpful and informative post. I already use PowerToggles but am not currently rooted.
No problem. Yeah, I didn't realize it was using root (on my Razr M, at least for the power functions) till I installed it on my unrooted Moto X.