hey,
i restored my nandroid backup from the newest nightly to an older backup, because my gapps didn't stay after the flash.
sadly the restore left some applications, even though i still got plenty of space on my sd card, what could've caused this? i do have titanium backups, but i'd rather restore my complete backup state, than fiddling and trying to remember which stuff is missing. furthermore titanium does restore the application, but not the data, it stays stuck on the restore progress notification, downloading the busybox from titanium didn't help either
i'd be very grateful for help
b
Are you using CWM 3.0?
Try reverting to an older CWM version our Amon Ra.
As for gapps not sticking, which gapps you using and which rom?
Look for temasek's 20110507 gapps.
Related
I have been browsing google for an answer to this problem but nothing I have found has seemed to help, so I suppose I'll ask and see if anyone else has had this problem had knows what to do.
I try to run a nandroid backup from cyanogen's recovery, it simply keeps making dots and will easily fill up a screen.
Furthermore, i try and do a "nandroid-mobile.sh -b" and it hangs on the data.img part for in excess of 20 minutes.
Any ideas what I can try to get nandroid to work again? It has failed to work both on the last version of SuperD and on the newest which I updated last night (1.11?)
I suppose I could try a full wipe and reinstall, but I haven't donated for the full Titanium backup yet... and restoring is a pain until I do that.
Is there anything besides a wipe that I could try?
Thanks
Tylerspilker said:
I have been browsing google for an answer to this problem but nothing I have found has seemed to help, so I suppose I'll ask and see if anyone else has had this problem had knows what to do.
I try to run a nandroid backup from cyanogen's recovery, it simply keeps making dots and will easily fill up a screen.
Furthermore, i try and do a "nandroid-mobile.sh -b" and it hangs on the data.img part for in excess of 20 minutes.
Any ideas what I can try to get nandroid to work again? It has failed to work both on the last version of SuperD and on the newest which I updated last night (1.11?)
I suppose I could try a full wipe and reinstall, but I haven't donated for the full Titanium backup yet... and restoring is a pain until I do that.
Is there anything besides a wipe that I could try?
Thanks
Click to expand...
Click to collapse
I have the same issue using Amon Ra's recovery with Nandroid.
I end up pulling the battery and rebooting.
Take a look in your Nandroid backup folder on your SD card....you will see files that are several GB in size.
The nandroid appears to get stuck in a loop.
I have not had a successful nandroid backup made since CM-Recovery. I might go back to it but Amon Ra has a lot more stuff.
I reverted over to Amon Ra recovery from the JF+ Cyan one, and did a full wipe and restore of everything and nandroid was working well after.
Not sure what happened, but its all peachy now. I donated to Titanium backup, and it is the best app I have used... makes me want to switch Roms daily now!
Tylerspilker said:
I reverted over to Amon Ra recovery from the JF+ Cyan one, and did a full wipe and restore of everything and nandroid was working well after.
Not sure what happened, but its all peachy now. I donated to Titanium backup, and it is the best app I have used... makes me want to switch Roms daily now!
Click to expand...
Click to collapse
Which Amon_Ra? I had the same issue on 1.5.x and 1.6.2.
Still no joy on nandroid or BART.
when i go into recovery mode, and select backup / restore, should i be selecting backup "data" or backup "all"? what is the difference?
I believe backup data will just backup your user apps and basic data on sd. Backup all baghdad up system apps and data as well. Significance is that you would not want to restore all if you were not running the same rom
mcord11758 said:
I believe backup data will just backup your user apps and basic data on sd. Backup all baghdad up system apps and data as well. Significance is that you would not want to restore all if you were not running the same rom
Click to expand...
Click to collapse
So if i would like to restore my phone to the state it is in now, would i be doing a backup "Data" or backup "all"?
when i go into recovery -->backup/restore --> backup, it says backup and restore data is recommended, and that backup and restore all was "use at own risk" or something along that line.
If you are looking to restore your current state on rom "x" down the line, our if you are playing with themes and something goes wrong you would restore all. To be honest I am not sure why you would ever restore just data, that is why I use titanium backup.
You would not want to restore a backup from rom x onto rom y
I only do nandroid backups if I am planning on playing with themes
mcord11758 said:
If you are looking to restore your current state on rom "x" down the line, our if you are playing with themes and something goes wrong you would restore all. To be honest I am not sure why you would ever restore just data, that is why I use titanium backup.
You would not want to restore a backup from rom x onto rom y
I only do nandroid backups if I am planning on playing with themes
Click to expand...
Click to collapse
hmm. so I shouldnt be using nandroid backup/restore to get back to where i originally was if i was testing out a different rom?
I think you have me backwards
If you are running phoenix rom, but wanted to try paragon, you could do a nandroid backup of phoenix so that your set up on that rom is saved. Try paragon, but maybe it uss not for you, so you go back to phoenix. now you can restore your nandroid after you reflashed phoenix to get your settings and apps back. You can not restore the phoenix backup while on paragon. Well actually you could but it will likely cause issues
Now if you wanted to play with themes and you try one out and tower phone won't boot. You can go back to recovery and restore to get rid of the theme
mcord11758 said:
I think you have me backwards
If you are running phoenix rom, but wanted to try paragon, you could do a nandroid backup of phoenix so that your set up on that rom is saved. Try paragon, but maybe it uss not for you, so you go back to phoenix. now you can restore your nandroid after you reflashed phoenix to get your settings and apps back. You can not restore the phoenix backup while on paragon. Well actually you could but it will likely cause issues
Now if you wanted to play with themes and you try one out and tower phone won't boot. You can go back to recovery and restore to get rid of the theme
Click to expand...
Click to collapse
So that means i should always "reflash" back to phoenix rom before restoring my backup onto phoenix?
in this case, would i be using the "restore/backup data" or the "restore/backup all" from the recovery menu? like i said earlier, there is a recommendation in the menu to use backup/restore data and a warning with backup/restore all.
dsu said:
So that means i should always "reflash" back to phoenix rom before restoring my backup onto phoenix?
in this case, would i be using the "restore/backup data" or the "restore/backup all" from the recovery menu? like i said earlier, there is a recommendation in the menu to use backup/restore data and a warning with backup/restore all.
Click to expand...
Click to collapse
Yes you would reflash phoenix
Backup all, I believe the warning is to prevent you from restoring all from one rom to another.
Ok, I have a backup from stock 2.1. I am running paragon which is 2.2.1. If I try to restore my stock backup I will likely get stock in a boot loop and will have to use odin to recover. I believe, note believe, that if I restored just data I would be ok because I would not be restoring any system information. I use titanium to back up my apps, so I do not see a use for the option
mcord11758 said:
Yes you would reflash phoenix
Backup all, I believe the warning is to prevent you from restoring all from one rom to another.
Ok, I have a backup from stock 2.1. I am running paragon which is 2.2.1. If I try to restore my stock backup I will likely get stock in a boot loop and will have to use odin to recover. I believe, note believe, that if I restored just data I would be ok because I would not be restoring any system information. I use titanium to back up my apps, so I do not see a use for the option
Click to expand...
Click to collapse
I see, still a bit confused because because i have a stock backup 2.2 from "rom manager". When switching between roms before, i would restore my phone back to the rom manager stock backup through recovery menu restore option before flashing it to another rom. That seemed to work fine.
Is there a reason for this? or is the rom manager backup different from a nandroid "backup all"?
dsu said:
Is there a reason for this? or is the rom manager backup different from a nandroid "backup all"?
Click to expand...
Click to collapse
No they are the same, may be better if you tell me what toy want to do, I don't know how to explain this in different terms. Restoring your rom manager backup does not qualify as flashing stock if that is what you are doing
Please someone tell me how to backup using nandroid. I've tried many times using ROM Manager but still stuck on recovery 3(e). My captivate run on froyo JI6. Thanks.
max_82 said:
Please someone tell me how to backup using nandroid. I've tried many times using ROM Manager but still stuck on recovery 3(e). My captivate run on froyo JI6. Thanks.
Click to expand...
Click to collapse
Get into recovery using power menu. Then you can use backup/restore to backup the rom.
Hi,
I hope that my experience could help other persons that fall in my situation.
After a try of CM, I couldn't restore my stock backup anymore, the phone hanged up in the lg boot screen.
There were no problems about ext4 partition or wiping or fixing permission.
I was thinking to do a NVflash procedure, but i gave another try: using old modaco CWM recovery. I overwrited CWM 4.2.0.2, performed a wipe, installed the modaco zip ext4->ext3 (i didn't remember if i was ext 3 or 4) and then restore my STOCK backup: EVERYTHING WAS FINE!!!
Maybe there's a problem in the newest CWM during restore a backup, i don't know, but in this way i could restore my original firmware.
Hope that this could be usefull.
Did you do your stock backup with modaco CWM? It has different MD5 checksum than the CWM. Might be the case why you can't restore your backup.
No, I did the stock backup with the original CWM.
I think that the problem is in the restore procedure of the original CWM (4.2.0.2), in fact also the CM restore is impossible, only if you install the zip immediately after the restore. Instead... hangs up.
I find when that happens the best method is to reflash the rom your restoring and just restore the data from your nandroid backup. Always works for me.
confirm this issue with cm & nandroid restore
-----------
This is true, restore and then install the rom. But how if your restore is the stock rom? NVflash? It's not the same.
Fortunally, Modaco CWM solve it without this procedure.
Thanks!!
This solve my problem with my stock nandroid restore. I downgrade CWM to 3.1.4 (did the backup with 3.2.8 version) and now works perfect!!
Finally i could restore my stock rom.
my solution was...
1. nandroid backup of mcr
2. full wipe & installed cm7
3. nandroid restore of mcr
4. installed mcr without wipe (this solved bootloop after restoring)
Hey guys,
I used odin to get boot it back up and then I used ClockworkMod to restore backed up data....
After phone said 'restore complete,' I let the phone reboot, but the phone will not reboot
at&t screen pops up and then black out then pops up again then into android recovery mode.
Any ideas?
Could you please provide a little more information about how you got to where you are? (e.g. what rom/kernel/modem/theme you were flashing, what ODIN you used, what version of CWM, etc.) Anything you provide will be helpful in troubleshooting.
Well I had cognitive 4.5.3 installed and I tried restoring using clockmod recovery
the restore wasn't successful and the phone would stay black screened after Galaxy S logo screen
So I turned on odin3 and put my phone on download mode then hit start on odin3
that successfully restored the phone to froyo 2.2 without any of my data
so I tried using clockmod recovery once again to restore the backup
and then... that's where I am
The phone won't boot. It will just go into recovery mode
Here's the message I got after trying to restore once again
--------------------------------
ClockworkMod Recovery v2.5.1.2
Checking MD5 sums...
Restoring system...
Restoring data...
Restoring datadata...
.android_secure.img not found. Skipping restore of /sdcard/.android_secure.
Restoring cache...
sd-ext.img not found. Skipping restore of /sd-ext/.
Restore complete!
--------------------------------
When did you make that nandroid backup? If you made it while on stock, you'll have to go back to stock first, then run the restore command. If on cognition, you'll need to be on the version you were on when you made the backup and restore there.
Here's the link I found on how to return to stock rom
http://forum.xda-developers.com/showthread.php?t=731989
I've done the first part - before the master reset and then tried restoring the backup and that is how I got to where I am right now.
Do I need to factory reset as well?
If I do factory reset, won't that erase the backup file?
Thanks. I really appreciate your help
jc830 said:
Here's the link I found on how to return to stock rom
http://forum.xda-developers.com/showthread.php?t=731989
I've done the first part - before the master reset and then tried restoring the backup and that is how I got to where I am right now.
Do I need to factory reset as well?
If I do factory reset, won't that erase the backup file?
Thanks. I really appreciate your help
Click to expand...
Click to collapse
To answer your question, doing the master clear will erase EVERYTHING stored in the phone's internal memory. Don't do that step now, as you should be able to get out of where you are without doing that.
I think where your problem occurred is that at some point you made a nandroid backup in CWM, and by trying to restore that on stock, it's freaking out. If you can remember what ROM setup you had on your phone when you made the backup, you could try to get back to that setup to use the restore option in CWM.
Before doing any of the things you're doing now, had you made a backup in Titanium Backup?
I do have backup made with Titanium Backup.
apps data and everything that I could backup with Titanium Backup
Will restoring what I had backed up with Titanium Backup and then restoring the system using CWM work?
I am currently at 2.2 Froyo, which was the rom I was using when backing up using CWM
You've flashed 2.2 stock? If so just flash the rom you previously had with cwm then let it boot. After it boots reboot into cwm then perform a restore in cwm. If that doesnt work nand backup might not be good and you will just have to flash stock again and just rub tibu and leave it at that.
**Thing about NAND backups is that you have to use the same system when you restore (i.e. you nand backup usng cognition then you flash another rom when you nand restore its not going to boot).
Thanks guys for the suggestions!
My phone has been saved!
Hi,
I wipe my device yesterday to make a fresh install because my o2x has gotten laggy for the past few weeks, I made a titanium backup + CWM backup.
Sadly, some of my apps Data was not backed up for some reason, although the app is able to be restored by titanium, but no previous data backup. The most important apps for me, the LG Memo app and color notes which both i use to record memo. Now lost.
Then i tried to restore from CWM which supposed to be last resort, and it failed to restore halfway through the SYSTEM partition. So now i am totally lost.
This is my second time in a few months cwm failed to make a proper backup (i rarely use it anyway), and the sad thing is i will not know that it is a bad backup until i tried to restore it to see it fails.
So my question is, is there a recommended version of CWM i should use? I flashed my cwm from rom manager, i think it is version 4.0.2.0.
Secondly, is there a way to extract and restore my app + data from raw cwm backup?
Thanks.
Current cwm version is 5.0.2.8. I have installed it directly and never experienced a problem.
I think that you can manually extract your app and push it to your phone.
It's not much of the app itself, but the DATA that is associated with the app. Like i said, the LG Memo i can just get back by reinstalling the rom, but the memos i saved for the past year or so is what i want to get back.
I am daily user of cwm instaled thry RomMenager and it works perfectly. You can try application Appextractor to extract app from your cwm backup
You can also try restoring your /data partition only. CWM has an option to selectively restore parts of your backup. That way you can get your info back.
Sent using some sticks and gum, just as McGyver would
DrummerMuppet said:
You can also try restoring your /data partition only. CWM has an option to selectively restore parts of your backup. That way you can get your info back.
Sent using some sticks and gum, just as McGyver would
Click to expand...
Click to collapse
I tried that... it ends up with bootloop.
@all
Thanks for all your help. I manage to restore the cwm backup after updating my cwm. It got stuck at boot but then i tried reinstalling the Spica's HP custom kernel.. everything's back again. Lucky~