Related
Wow, can anyone help me with my issues. I have:
DREAM PVT 32B ENG S-OFF
HBOOT -1.33.2005 (DREA21000)
CPLD-4
RADIO 3.22.20.17
Apr 20 2009, 15:30:43
I keep trying to load the ROM but they don't seem to take so I just get stuck with the ROGERS logo loading screen and nothing else after that.
I can access the system recovery utility, I am using the CyanogenMod v1.2 + JF. After I apply sdcard update and reboot I get stuck on the ROGERS logo.
What am I doing wrong?
Thanks!
are you waiting 15 mins? after flashing it takes upto 15 mins.
15, 20, 25, 30 minutes...
have gone by, with nothing happening.
Ok, If you can access recovery and spl then you aren't bricked.
What ROM are you flashing?
Is your card partitioned or is it a single fat32?
EDIT: sorry didn't see you radio and spl versions in first post.
Fingerlickin said:
Ok, If you can access recovery and spl then you aren't bricked.
What ROM are you flashing?
Is your card partitioned or is it a single fat32?
EDIT: sorry didn't see you radio and spl versions in first post.
Click to expand...
Click to collapse
I've tried several different ROMS haykuro, hacheroski, rogers, etc...
Card is partioned as a single fat 32
Many ROMs require a second partition--EXT2/3/4. One Fat32 partition won't get it done for these.
Find Cyanogenmod 4.0.4 on google and use that, It doesn't require a second partition. In fact I think only Hero roms require multiple partitions.
Just downloaded "update-cm-4.0.4-signed"
Loaded the update with recovery utility and now I'm almost 10 minutes into watching the Rogers splash screen, again.
My version of CyanogenMod v1.2 + JF recovery utility does not have a selection for backup recovery. I have the option to make an nandroid v2.1 backup. But how do I do a restore?
since your phone is rogers and rogers phones are special, did you do all of the fastboot commands
How bout a good ol' fashion wipe
Wow, I must have overlooked the fastboot commands, I'm not exactly sure what that is. I think I've found myself in a complete quagmire trying to read through the threads. The blur between Rogers Dream and Tmobile G1 instructions for this process has confused me. Quite frustrated now. Thanks for the help so far though. Cheers!
How might one upgrade the recovery utility from cyanogenmod 1.2 to 1.4 if I cannot do anything besides doing a power+home button OR doing a power + camera button? I am basically stuck since the device just rests on the Rogers splash screen all the time.
here is the link to the rogers thread for rooting it, you will need to do the fastboot commands from it with the gimme root file from it.
I apparently screwed some things up in my attempt to upgrade to Cyanogenmod 4.1.99 so I can move to 4.2.3. . . anyway, I now have the HTC bootloader up with fastboot, the standard Android recovery, and HTC ADP 1.6 DRC83 firmware installed, and its up and running. I don't have root, and I am completely lost as to how to get root back, get cm-recovery 1.4 back, and from there, I should be ok...
I do have DREAMING.nbh on my sd, and when i go into fastboot(pwr+camera) It gives me a list:
Parsing. . .[DREAMING.nbh]
[1] BOOTLOADER
[2] RECOVERY
[3] BOOT
[4] SPLASH1
[5] SYSTEM
[6] USERDATA
[7] RADIO_V2
Do you want to start update?
<ACTION> Yes
<Power> No
This is where I don't know if I should do anything without advice, as I don't want to brick my G1 any further
Anyone care to help out?
if you messed up like i did a few months back , and lost root because you flashed the htc recovery image and didn't flash cyan's rom on top of it then...i can help. i'm assuming you lost root on your rom because of that, and when you rebooted it took out cyan's recovery image as well, so you can no longer flash anything else into your phone. Alright! first thing's first, is we need to have a look at what spl you're using, take out that dreaming.nbh file from your sd, you won't need it, instead, put on a recovery image like cyanogen's 1.4 or amon ra's 1.2.3 (i suggest the latter)
anyways , you're gonna have to have the hard spl/ engineering spl/ or the haykuro "death/danger" spl installed on your phone. I'm going to assume you have at least one of these, because if you don't and you have the stock spl that's a different story. If you have the stock spl for some reason, you are gonna have to downgrade your phone like you did when you first got root. Research the forums , there are loads of guides on how to downgrade your phone, go to the section that specifically talks about using the bootloader to restore the dreaming.nbh file.
if you do have either the hardspl, death, or engineering's spl,
you need to search the forums on how to use fastboot and adb
you're gonna need to push the recovery image file (cyan's or amon_ra's)
into your phone and wahpow!
you're in the green, once you have the recovery image back in the phone, you can boot into it and flash w.e the hell you want
phamous said:
if you messed up like i did a few months back , and lost root because you flashed the htc recovery image and didn't flash cyan's rom on top of it then...i can help. i'm assuming you lost root on your rom because of that, and when you rebooted it took out cyan's recovery image as well, so you can no longer flash anything else into your phone. Alright! first thing's first, is we need to have a look at what spl you're using, take out that dreaming.nbh file from your sd, you won't need it, instead, put on a recovery image like cyanogen's 1.4 or amon ra's 1.2.3 (i suggest the latter)
Click to expand...
Click to collapse
You hit the nail on the head!
phamous said:
anyways , you're gonna have to have the hard spl/ engineering spl/ or the haykuro "death/danger" spl installed on your phone. I'm going to assume you have at least one of these, because if you don't and you have the stock spl that's a different story. If you have the stock spl for some reason, you are gonna have to downgrade your phone like you did when you first got root. Research the forums , there are loads of guides on how to downgrade your phone, go to the section that specifically talks about using the bootloader to restore the dreaming.nbh file.
if you do have either the hardspl, death, or engineering's spl,
you need to search the forums on how to use fastboot and adb
you're gonna need to push the recovery image file (cyan's or amon_ra's)
into your phone and wahpow!
you're in the green, once you have the recovery image back in the phone, you can boot into it and flash w.e the hell you want
Click to expand...
Click to collapse
I know that I had HardSPL on at one time, would everything that has happened somehow remove it, and how can I check if its still there?
I will likely use Cyanogen's recovery. If possible, link me to a good "howto" on loading Cyanogen from Fastboot.
alright, to check what spl you have, turn off your phone and hold camera and the power on button,
you'll go into your bootloader, and it will display what spl you're running
it's been a while since i remember what numbers belong to what spl, but as long as you don't see the multicolored spl, and you see like three little android bugs on the bottom, you're good to go
uhm i kinda saved random links to things that i used, you're gonna have to read all these documents and learn all about adb, it's worth it in the long run, and there's no better time to learn it now since it's your only hope of getting root back.
http://androidcommunity.com/forums/f10/adb-fastboot-for-rookies-18124/
http://forum.xda-developers.com/showthread.php?t=502010
BUT ANYWAYS
OMG i just found the best guide to your problem right here
http://wiki.cyanogenmod.com/index.php/RE-recovery-img
^^ that is GOLD!
hope this helps buddy!
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
Apr 20 2009, 15:30:43
Thats all it gives me, but there are 3 Androids on skateboards at the bottom, and its a all white screen.
I cant seem to get the SDK to work, let alone install on my PC here(Damnit Vista, I can't wait for my copy of Win7 Pro to get here!!!!) so I might just let it charge up overnight, check here in the morning and give it a whirl on my laptop with XP. Hopefully, I can get this all taken care of. You have been a world of help so far. Just keep an eye out for some updates here tomorrow.
SAME HERE wow, couldn't get the damn sdk to work on vista either
GO XP
that's what i did, worked instantly, find someone with xp and ask them to let you borrow it for about an hour
----
you have an appropriate spl btw, it'll be able to fastboot correctly
in the meantime, i'd read up on those links i sent you, especially the last one,
and you'll be good!
goodluck!
ok, looks like I got the SDK to work on here, and I have it updating right now. Its first update was the USB driver. If anyone has some time, and wants to send me a IM over AIM to help me out with this, please IM me.
I am going to let this update, and then hope that I can get it to flash cm-recovery back onto the phone.
cm-recovery 1.4 is BACK! OK! AWESOME
god this had me abit scared.
Ok, back to the prior task at hand. at this point, can I update to CyanogenMod 4.1.99 then update to 4.2.3, or can I update this directly to 4.2.3?
ok, you cant update directly to 4.2.3 XD
Ok, awesome, ive got cm-recovery 1.4, and Cyanogenmod 4.2.3.1 up and running. Time to give Cyanogen some credit. this firmware is FAST!
Also, I want to thank everyone that has helped out with my issue. you are all worthy of a beer...I just aint got any money to pay for a beer for you all right now XD
I have been reading so much but i have some holes that i would like to fill if possible. i had a g1 back in the day and rooted it and flashed it and so on. well i just got a used "rooted" G1 recently and am trying to get back into it but i have some questions that i cant seem to figure out. first of all this is what the G1 is saying, what does this mean, is it hard spl or soft or?
Dream pvt 32b eng s-off
hboot-1.33.2005 (drea10000)
cpld-4
radio-2.22.23.02
Im basically just wanting to test out 2.1 or 2.2 on it but starting in the middle is more confusing lol
Its an Engineering-SPL (IIRC)
you dont need to install Danger / Death SPL to install 2.1 / 2.1
http://forum.xda-developers.com/showthread.php?t=717874
You're G1 has an SPL supported by all ROMs and the latest radio, so you're all ready to go CM6 (Cyanogen Mod 6) is a Froyo ROM, try it out.
So yea thanks for the quick response i did install cm-6 but i cant find the android market mabey i mist something?
Sofwhitewolf said:
So yea thanks for the quick response i did install cm-6 but i cant find the android market mabey i mist something?
Click to expand...
Click to collapse
You have to flash the gaaps right after. It is in the OP in cm 6 thread.
yea i chose it in the rom manager app it downloaded and then rebooted to i guess install but then when it came back up nothing there..
My G1 is being a REAL B*TCH!
Firstly, the root method I followed: http://forum.xda-developers.com/showthread.php?t=1098899
I've loaded the CM, FBL, FCS and GS roms and each ends about the same way...first boot always goes right to the android and the login and what-not.
However, restart my device and it hangs on the G1 splash screen. What gives?
I'm tired of having to reflash a ROM every time I need to reboot.
power on holding camera or back - write down everything it says. you have amon ra recovery correct?
Yes I was running running amon ra recovery, but I guess we'll never know since I've already rolled it back to 1.6, I'll try again and see what happens.
demkantor said:
power on holding camera or back - write down everything it says. you have amon ra recovery correct?
Click to expand...
Click to collapse
Restored to 1.0, update to 1.5...pretty much the entire procedure over again, plus the FCS ROM install followed to a t. Same exact problem. Here's what it says:
DREAM PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA10000)
CPLD-4
RADIO-2.22.28.25
Oct 21 2009,22:33:27
Is the G1 splash screen supposed to be there for like...15 mins?
At this point I know I didn't miss it twice.
Must be a curropt emmc, not too common on a g1. Either that or something very strange is going on that I'm missing here. It could be some setting that is anabled on boot such as some overclocking. Sorry I'm not going to be much more help other that suggesting a 1.6 rom say super d and stick with just the danger spl and radio. Worth a shot?
Sent from my HTC Vision using xda premium
Warning: Please do this at your own risk. This is not the safest method for doing this. It is much safer to flash this with fastboot. Although there are lots of good reactions in doing thid. I am not responsible for damage or even bricking your phone - Do not skip anything here, please follow everything on this post.
Today I am going to teach you how to flash the 1.33.0013d/2.22.28.25 combo in Amon RA recovery! Like I said, this is not the recommended method, but it works, when you follow EVERYTHING on this post.
WARNING:
1) flashing a 2.22 radio via recovery if you have a 3.22 or 1.33 radio via recovery *will* brick your phone
2) flashing the 1.33.0013d spl with a 1.22 radio via recovery *will* brick your phone
So, first off, you have to be rooted.
When you are rooted, you have to have Amon_RA recovery installed. On how to do this, I have a tutorial for it here:http://forum.xda-developers.com/showthread.php?t=1623954
Now, you have to upgrade your phone to Danger/Engineering SPL. It's called like that, because it has a danger of bricking your phone, and it enables fastboot - a tool, that gives you the oppertunity to flash ROM's and such from your computer.
It's like a recovery, but from your computer. To do this, click here:http://wiki.cyanogenmod.com/wiki/HTC_Dream:_DangerSPL
After you do THAT, you can finally start to flash the 1.33.0013d SPL and 2.22.28.25 Radio. This will produce 14 mb of extra RAM for you, but won't be able to play 3D games, like Temple Run. But the 14 mb of RAM really makes a difference. Also you won't be able to use CyanogenMod ROM's, although you can temporarily switch back to Danger SPL. Just look in the EzTerry thread.
You can find the links for those down below:
HBOOT: http://code.google.com/p/g1tools/downloads/detail?name=HBoot-1.33.0013d.zip&can=2&q=
Radio:
http://rapidshare.com/files/43135125...22.28.25_S.zip
Now, put all file to your SD-Card, and reboot into recovery. *TIP* If things go bad, please make a Nandroid/BART backup before you do anything. And one thing, make sure that your phone battery is full, as in green LED, before you flash any Radio/HBOOT, or simply plug your phone into your charger. Now, go to the wipe section in your recovery, and just wipe everything, like press every option you have and wipe. Or simply use Oshaka SuperWipe. Oshaka SuperWipe is reccomended, because it wipes some things, that your recover does not.
After your wipe, go to install zip form SD-Card, then pick your Radio file (update-2.22.28.25 blah.zip and install it. If it reboots or goes to a unpack a MyTouch 3g screen for 3 minutes or so. WHILE YOU'RE DOING THIS;DO NOT IN ANY WAY INTERRUPT THIS; THIS WILL BRICK YOUR PHONE; IF IT STAYS FOR 10 OR SO MINUTES; YOU MAY DID SOMETHING WRONG AND YOU BRICKED YOUR PHONE , SO DON'T BE IMPATIENT BY PULLING YOUR BATTERY! After that it reboots and goes back to recovery. Then go to Flash zip from SD-Card and choose the HBOOT-1.33.0013d.zip file. It will install itself and remember, dont be scared by long waiting times. Now, if you did what I said, power off your device and press [POWER+CAMERA] . It says:
DREAM PVT 32B SHIP S-ON
HBOOT-1.33.0013d
CLPD-4
RADIO-2.22.28.25
Congrats! You just installed a new Radio/SPL combo!
If I helped you, please push that 'Thanks' button!
There might be some exceptional reasons to use recovery to flash a radio/spl, *but* if you have already a fastboot capable spl installed on your phone, there are almost no reasons left ...
Learn to use fastboot and flashing of radio/spl is much more relaxing
Just my 0.02 €
Sent from my Gingerbread on Dream using XDA
AndDiSa said:
There might be some exceptional reasons to use recovery to flash a radio/spl, *but* if you have already a fastboot capable spl installed on your phone, there are almost no reasons left ...
Learn to use fastboot and flashing of radio/spl is much more relaxing
Just my 0.02 €
Sent from my Gingerbread on Dream using XDA
Click to expand...
Click to collapse
I said that they have a choice between fastboot and recovery and i reccomended to use fastboot. It is a choice, for me it's much easier to use recovery. fastboot is a little too much for me, so that's why I did this. Also, I think you have a stock spl/radio, you have higher risk to brick your phone. It's in the warning section.
Hi
Can you point me to a guide on how to flash the 1.33.0013d spl using fastboot.
Thanks.
http://forum.xda-developers.com/showthread.php?t=831139
Link for the radio is dead, here's the new one: http://depositfiles.com/files/mwn7ne6ts THANKS EzTerry!
little help is need and will always be appreciated
hi i found my old G1 laying around somewhere and decided to mess with it and install a new rom (figur it was gonna be a easy task) well i started following a guide got everything setup and was successfully able to install recovery and spl.. however when i tried to install a rom i had issues there now first i wasnt able to go pass my G1 boot screen then re flashed recovery and found a rom did a super wipe and flashed rom so after that i reboot phone and got stuck at boot animation waited around 35 mins no go... it was in loop or something.. thus i figur i look around came across this... just for reference i have danger SPL and it is 1.33.2005 and the radio is 2.22.23.02 so i thought i tried your way got the files went into recovery and flashed everything as directed but now when i go to recovery it still shows 1.33..2005 and radio is still 2.22.23.02.. kindly help i want my g1 running unfortunately dont have nand back as well... any assistance is greatly appreciated thank you
See link two post up from yours
Sent from my Nexus 7 using xda premium
demkantor said:
See link two post up from yours
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
would you happen to know why i am not able to flash these files from recovery? because i am not much familiar with fastboot. and thanks for leading to that post.
---------- Post added at 01:06 PM ---------- Previous post was at 12:57 PM ----------
Yes i ried installing those files from recovery and was successfully able to flash the new radio and spl.. my prayers have been answered though now iam gonna flash a rom.. thank you all for your help and thanks for the great guide.. much appreciated
Thanks for reading my post!
Quick question about 28.25 radio. I've already read the post of differences of 27.08 and 28.25. But I can't seem to send MMS. I can receive but when I send it says sending, and stays that way, could this be fixed by updating to 28.25?
Sent from my Dream using xda app.
ROM: Ginger Yoshi
SPL: 0013d
RADIO: 27.08
RECOVERY: Amon-Ra
Okay so I figured the mms out, APN config. As for the radio I didn't see any difference at all. Its more of an area thing I guess either way. Flash the radio test it out and look for diferences, as for me I'm going to go flash 27.08.
sent from XDA-Dev app
DEVICE: HTC DREAM (G1) 32B
ROM: GINGER YOSHI
SPL: 0013D HBOOT
RECOVERY: AMON-RA
RADIO: 28.25 (thinking of going back to 27.08)
Click to expand...
Click to collapse