Database Develop

Can't connect my N1 with Linksys router

Hello
My N1 can connect easily to all kind of wifi routers and modems without problem but not with my fitness club's one, they have a Linksys N160.
My N1 can detect the signal,enter the password but then it's stucked with the message ''getting ip...''
Where is the problem? is it a know hardware or software compatibility stuff?

Sometimes rebooting the wifi router helps. Also make sure that when the guy over at your fitness club reboots the router you don't have the wifi of the club saved. delete the saved wifi profile, reboot the wifi router and then try. Cheers.

Already tried it several times. I saw that OS4 of iphone/ipod have the same problem with router enabling Wireless-N, I will ask him to limit the router to B/G

I also had similar problem with Linksys WAG54G2 (at latest firmware). Then I changed to much cheaper adsl router, TP-LINK WD-W8960N and no more connection problem.
Sent from my Nexus One using XDA App

I had problems using my Nexus One on my SMC Barricade 802.11b/g/n router when 802.11n was enabled. Turned it off; problems were gone. I don't think that works well yet, though some people have said otherwise. Could be a router-specific issue.

Ok so it's a WAG160N to be specific.
He tried to use mixed B/G instead of mixed (which would imply N too) but it still stuck at getting ip...
I told him to throw this router in the garbage because anyway SE and HP mobiles can't connect too,but he said he would do it but his boss will never accept to pay a penny more

My parents had a router that did exactly the same, my phone got stuck on Obtaining IP, whilst the missus 5800 connected and broswed just fine.
It was a crappy old thing and they replaced it the other week, now I can connect and browse just fine.

I also use a linksys WAG160N.
bought a nexus one, could not for the life of me get an internet connection.
turns out dns on router is poofed, so i just set DNS from my isp manually on the nexus one together with a static ip and booya interent at full 802.11n speeds.
sometimes its the simple things.

This sounds similar to when I set my router to channel 13 or whatever the max was on it. My N1 would only sometimes get a connection, but would eventually drop it and stay off. Solved it by selecting a lower channel (WifiAnalyzer suggesten channel 1 as the best alternative to channel max) on the AP.
I can see that in CM6 nightly that I have since started using I can choose regulatory domain, and thereby open up channels previously blocked. If you can't change anything on the AP this might help you solve the problem on your end.
So suggestions if none of the posts above me provide a solution is to run WifiAnalyzer and see how the channel-graph looks.

[Q] Hero won't connect to WiFi

So, I've searched for a bit, on here and Google, but not having much luck. My phone has always been good at connecting to WiFi hotspots. However, I am currently visiting a house that has a Wireless N router and using WPA2 security, and it won't connect.
Is it true that these phones have issues connecting to that or is there a fix?

Volknochi said:
So, I've searched for a bit, on here and Google, but not having much luck. My phone has always been good connection to WiFi hotspots. However, I am currently visiting a house that has a Wireless N router and using WPA2 security.
Is it true that these phones have issues connecting to that or is there a fix?
Click to expand...
Click to collapse
Well the hero only has b/g wireless capabilities, change the wireles router to also brodcast in g mode, since n will not work.

Here is the odd thing. I mentioned about it to the person who setup the wireless network, and he said that the router is broadcasting in B, G, and N. My phone detects it, but when it attemps to connect to it, it says "Disconnected". Am I doing something wrong or is there something missing in my phone?

My phone connects just fine to my N router. There might be setting restrictions that need to be changed on the router via the administrative computer
Sent from my HERO200 using XDA App

[Q] Galaxy Can't Connect to Cisco Wireless Router

Have the Cisco Wireless router WRT160N and have tried all set-up options on the Galaxy. It finds the WPA/WPA2 network and have entered the passcode but scans and disconnects. Also tried the WPA and the passing of PINs but still no connect
Hope someone has an idea that can try
Tks

Has it ever connected to this device?
Has it ever connected to another WAP or router?

Thanks PB, the answer is "haven't tried." I just got it and trying to set-up. I am going to head out this afternoon to a hotspot and see how goes.
Samsung tech says it should be OK but Cisco want talk since warranty is out

OK, drove out and came upon an unsecured access point and it did connect so is in one of my set-up
????

I have the same router and connect with no issue. I did have problems connecting to a different Cisco router and what I did to fix it was delete all shared wireless connections then started from scratch and it worked using wpa2
Sent from my SCH-I800 using XDA App

[DROID3] Connec to wifi but no pages load etc (no connection) HELP!!!

I can connect to my home wifi fine, good signal and everything, but the thing is when I go to say, load a webpage, it just won't load. No matter how long you leave it.
But when I connect to a mobile hotspot Wifi from my other phone it works fine.
Could it be something to do with my router?
Thanks to anyone that try to help

What router is it?
Sent from my XT862 using XDA

If you have a terminal emulator on your phone, you can try to "ping" the router (most likely 192.168.something.1..)
"ping 192.168.1.1" or whatever address the router has...
This is the same address that you'd type in a browser on your PC to configure access the router's config..
And try to ping something on the Internet such as one of Google's DNS server (ping 8.8.8.8)
A few more details might help us help you:
Router brand and model?
Encryption type used (None, WEP, WPA, WPA2..)? ..WPA2 is sometimes downright broken on some router models..
Does your wireless Internet router work for another wireless device?
Does your Internet work from a wired computer on the same router?

Is the router configured for wireless g,n, or mixed? You might need to play with the router configs.
Sent from my XT862 using XDA

MrObvious said:
What router is it?
Sent from my XT862 using XDA
Click to expand...
Click to collapse
It's a NETGEAR Wireless N Router - WNR2000.
Security: WPA-PSK [TKIP] + WPA2-PSK [AES]
Channel: Auto
All my other devices that I have used the wifi with have worked fine.
This is really annoying, I just can't think of what the problem is..

How many devices are connected to the router at any given time? Try disconnecting another device from wifi and see if that works.
Sent from my XT862 using XDA

Yeah when I disconnected my laptop and then connected my DROID3 it worked fine.
What is the solution to allow it for the DROID3 to work?

Your router only allows for a certain amount of connections. You will either have to turn wifi off of one of the devices or get another router.... simple solution would be to turn off wifi one of the devices when you are not using it.
Sent from my XT862 using XDA

vit3l said:
It's a NETGEAR Wireless N Router - WNR2000.
Security: WPA-PSK [TKIP] + WPA2-PSK [AES]
Channel: Auto
All my other devices that I have used the wifi with have worked fine.
This is really annoying, I just can't think of what the problem is..
Click to expand...
Click to collapse
Try changing the security to WPA2 with AES only - I've seen problems with Android phones in the past when both TKIP with WPA and AES with WPA2 are enabled. If you have any old devices that don't use WPA2 (unlikely), then try WPA with TKIP only. See if that fixes it.
If not, and it's a device limit issue, check the DHCP settings on the router to see what the address range is. If it is set to something like 192.168.0.2 to 192.168.0.xx (whatever number xx is), try extending the range to something larger (though no larger than 254, obviously) and see if that helps.

I tried it a second time and a only got connections every minute or something and it wouldn't last for very long :\
It's not a device limit issue because I have had 2+ devices connected to the wireless before.

I second switching to AES. It is more secure anyway.
Sent from my XT862 using XDA

^ tried that aswell and it didn't work

Maybe try setting a static IP?
Sent from my XT862 using XDA

vit3l said:
^ tried that aswell and it didn't work
Click to expand...
Click to collapse
Turn off all security on the router and try again as a test.also you might need to reset your wifi connections on your phone. Try wifi fixer
Sent from my XT862 using Tapatalk

Have you tried resetting the router? Power it down and then re apply the power. I know that it makes no sense that this should work, but it has fixed the problem twice on my D3.

[Q] Droid 3 won't find my Wi-Fi connection

My Droid 3 (Milestone 3 - XT860 - here in Argentina) won't find my Wi-Fi connection, my modem-router is a Zyxel P-600 Series
Finds others Wi-Fi connections, but not mine. The SSID is visible, I tried also adding the connection manualy, but nothing happened.
Any ideas??
Changing ROM will make it find the connection?
Thanks!

Maybe try changing the broadcast channel on the Router or making sure that it is set to Wireless b/g/n or b/g. It likely isn't a ROM based problem if it sees other wireless networks.

Nope, nothing about that.
Any other ideas?

If you have encryption enabled try turning it off to see if it works without it. If it does, try a different encryption. My droid didn't seem to like WPA2 much.

linuxgator said:
Maybe try changing the broadcast channel on the Router or making sure that it is set to Wireless b/g/n or b/g. It likely isn't a ROM based problem if it sees other wireless networks.
Click to expand...
Click to collapse
Sorry, you were right! I had to change my channel ID. Thanks a lot bro!!

Glad you got it working.
Sent from my DROID3 using Tapatalk