Related
WARNING
This is a HTC test rom and was never given to the general public
Note the rom and radio version
This could be of intrest to cookers and rom hackers
http://rapidshare.com/files/1784304...9.405.2_Radio_52.46.25.26_1.08.25.23_Test.exe
I wonder if theres any difference in 3G bands.
This wouldn't be something i would want to just flash to right? I should wait for a rom cook? Is there a chance of bricking my phone trying it?
Anyone? Can i try out this rom on my phone without risking a brick?
The instalation brick at 13% for me, when i reboot, i have the tricolor screen of the bootloader so no problem to flash another rom but this one doesn't work for me
The SPL 1.14 olipro may be the problem?
Anybody have just the radio extracted from the ROM?
EDIT: I have modified the htcrt.exe tool and added blackstone to the configuration files. I will post the radio in a little bit.
AllTheWay
You are to cool
HDuser said:
AllTheWay
You are to cool
Click to expand...
Click to collapse
Well I tried to flash just the radio.
I got a update failed error.
Blackstone said:
00018003 BLACIMG.nbh - fail
Upgrade ROM code error Please try again
Click to expand...
Click to collapse
I am downloading the stock ROM now to flash the radio cause I don't have stock blackstone radio by it self.
In the bootloader it reads RUUNBH
Upgrade ROM code error Please try again.
USB
Let us know.
Turb0wned said:
Let us know.
Click to expand...
Click to collapse
Everything is all good with the device..
Downloaded the WWE 1.19 ROM that cmonex posted. http://rs95.rapidshare.com/files/17....831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
All is well.
No luck with this rom then?
Among other things, there's MFG SPL 1.07 bundled with this RUU. Avoid!
probably you set radio value to 0x300 in htcrt. problem - it must be set to 0x301.
AllTheWay said:
Well I tried to flash just the radio.
I got a update failed error.
I am downloading the stock ROM now to flash the radio cause I don't have stock blackstone radio by it self.
In the bootloader it reads RUUNBH
Upgrade ROM code error Please try again.
USB
Click to expand...
Click to collapse
stepw said:
Among other things, there's MFG SPL 1.07 bundled with this RUU. Avoid!
Click to expand...
Click to collapse
are you also getting the problem of screen not turning on after a resume with MFG SPL installed?
cmonex said:
probably you set radio value to 0x300 in htcrt. problem - it must be set to 0x301.
Click to expand...
Click to collapse
I tried to flash this radio once again. Radio fail 0x301 was set.
ICR
Hi there,
Is it possible to see if the ICR (in call recording) app is included in this rom like it was discussed in some other threads. They were talking about a test rom form HTC. And maybe could be extracted ?
Thanks
cmonex said:
are you also getting the problem of screen not turning on after a resume with MFG SPL installed?
Click to expand...
Click to collapse
Kernel is not loading, stuck in OEMInit if OS is booted from MFG SPL 1.07 loaded via USPL. Didn't try flashing it though...
Has anyone got this radio to work yet?
Not that I know of. Would like to be able to flash this radio.
AllTheWay said:
Not that I know of. Would like to be able to flash this radio.
Click to expand...
Click to collapse
People in Raphael forum have mentioned they tried it and high battery usage is the only "benefit"...
You dont meant that they tried it on the HD right?
i was following this guide here http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod and everything seemed to go smoothly. i verified the md5 thing and it matched and everything. my sd card is fat32 for the record. i got to where it was flashing the spl. the screen stayed saying it was flashing for a really long time and half way through the device rebooted itself. It was plugged into its charger and I was not touching it. It just rebooted prematurely before the spl had been flashed. now when I boot up it doesnt bring up android or anything!
i bought this phone second hand and unlocked it, im using it with telus. If its bricked can i send it anywhere to get fixed?
edit: not sure if it means anything but it said HBOOT was 0009 not 0010. apparently 0010 was perfect spl or something like that. im not sure if this matters but its just something i noticed.
ddd67 said:
It just rebooted prematurely before the spl had been flashed. now when I boot up it doesnt bring up android or anything!
i bought this phone second hand and unlocked it, im using it with telus. If its bricked can i send it anywhere to get fixed?
edit: not sure if it means anything but it said HBOOT was 0009 not 0010. apparently 0010 was perfect spl or something like that. im not sure if this matters but its just something i noticed.
Click to expand...
Click to collapse
So can you get into recovery or fastboot?
Ace42 said:
So can you get into recovery or fastboot?
Click to expand...
Click to collapse
No, it doesn't do anything.
can anyone help PLEASE
If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.
ddd67 said:
No, it doesn't do anything.
Click to expand...
Click to collapse
Which spl were you flashing? Did you flash a radio first?
Not being an ass, but you do know how to enter these modes, right.
Fastboot= camera+power held down
Recovery= home+power held down
If it is indeed bricked, there are very few solutions. Only working one is replacing board at the moment. There is other ways trying to be had in development forum as we speak. Don't start a new theard, but search and read thoses, maybe something can help you/help them.
goldenarmZ said:
If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.
Click to expand...
Click to collapse
That's the thing, I didn't interrupt the flash. I thought that if I checked the md5 hash that it would work perfectly. I didnt know it could fail without me doing anything.
fastludeh22 said:
Which spl were you flashing? Did you flash a radio first?
Not being an ass, but you do know how to enter these modes, right.
Fastboot= camera+power held down
Recovery= home+power held down
If it is indeed bricked, there are very few solutions. Only working one is replacing board at the moment. There is other ways trying to be had in development forum as we speak. Don't start a new theard, but search and read thoses, maybe something can help you/help them.
Click to expand...
Click to collapse
Can I send the phone anywhere and get it fixed?
goldenarmZ said:
If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.
Click to expand...
Click to collapse
I followed this guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod
My dream is a rogers one, so I assume its EBl1, I haven't done anything to it besides follow that guide.
1. I got my 2GB memory card and formatted it to FAT32 on my computer.
2. I put spl-1332005.zip on the card (I kept it as a zip)
3. I downloaded this file: signed-dream_devphone_userdebug-img-14721.zip
4. I opened that file I downloaded and copied system.img to my memory card.
5. I downloaded update-cm-4.2.x-signed.zip and bc-4.2.x-ebi1-signed.zip on my SD cards root.
6. I installed zinx recovery flasher and cm-recovery-1.4 32A flashed onto my phone (now that I think about it I didnt check to see if my phones 32A. I don't know where to do that)
7. I booted into cyanogenmod screen.
8. I flashed the SPL, it didn't get interrupted and I thought all went right, but I guess not.
That is everything I did. did I do something wrong?
ddd67 said:
That's the thing, I didn't interrupt the flash. I thought that if I checked the md5 hash that it would work perfectly. I didnt know it could fail without me doing anything.
Can I send the phone anywhere and get it fixed?
I followed this guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod
My dream is a rogers one, so I assume its EBl1, I haven't done anything to it besides follow that guide.
1. I got my 2GB memory card and formatted it to FAT32 on my computer.
2. I put spl-1332005.zip on the card (I kept it as a zip)
3. I downloaded this file: signed-dream_devphone_userdebug-img-14721.zip
4. I opened that file I downloaded and copied system.img to my memory card.
5. I downloaded update-cm-4.2.x-signed.zip and bc-4.2.x-ebi1-signed.zip on my SD cards root.
6. I installed zinx recovery flasher and cm-recovery-1.4 32A flashed onto my phone (now that I think about it I didnt check to see if my phones 32A. I don't know where to do that)
7. I booted into cyanogenmod screen.
8. I flashed the SPL, it didn't get interrupted and I thought all went right, but I guess not.
That is everything I did. did I do something wrong?
Click to expand...
Click to collapse
It looks as if you didn't flash the radio first. the 26I radio, that is
Oh man, which part of the guide shows me how to flash the radio?
ddd67 said:
Oh man, which part of the guide shows me how to flash the radio?
Click to expand...
Click to collapse
If you flashed the spl already, it is too late. The radio NEEDS to be flashed first
@ people telling him to flash the radio, if you're following that guide, you don't flash the radio, you leave it as is.
He did nothing wrong, he just got ****ed up by pure chance, though if he were reading the guide closely he would realize that he wasn't supposed to put system.img on his SD card.
That SPL is safe on all Rogers dreams.. either you were spectacularly unlucky with a bad flash, or it isn't actually bricked.. Remove the battery, hold the camera button, replace the battery and power on.. anything?
goldenarmZ said:
That SPL is safe on all Rogers dreams.. either you were spectacularly unlucky with a bad flash, or it isn't actually bricked.. Remove the battery, hold the camera button, replace the battery and power on.. anything?
Click to expand...
Click to collapse
No dice. I didn't think it was possible for it to just brick on its own accord
AHH!
So I followed the turorial on updating the rogers HTC Dream to a T. I successfully changed the SPL to 1.33.2005 but the "system.img" file is no longers available on the HTC developer website. I tried using the system.img file from the Google I/O page (from the HTC developer website) but was left with a phone that pretty much was an HTC version of the iPod touch with no phone-related-applications working. does anyone have a backup of that system.img file for android 1.6 for the Htc DREAM??
Thanx
Meldon
@meldonlobo, are you looking for this?
http://forum.xda-developers.com/showthread.php?t=593626
I thought this was 100% safe. what happened?
my radio version was 3.22.20.17 and HBOOT-1.33.0009 (DREA21000). my friend told me to post that because it might help. Is that radio right for following the guide?? It also says 32B not A. The tutorial mentions something about 32A. Is that why?
i remember that if i went to recovery mode when it was stock it showd an exclamation mark
Please can someone tell?
Hi all
where to find ROMUpdateUtility.exe ???
I download Dutty's rom, but only have one nbn file.
I searched in forum said need ROMUpdateUtility.exe but i can't find it ......
Pls help !!
Thanks
Stussy
stussy said:
Hi all
where to find ROMUpdateUtility.exe ???
I download Dutty's rom, but only have one nbn file.
I searched in forum said need ROMUpdateUtility.exe but i can't find it ......
Pls help !!
Thanks
Stussy
Click to expand...
Click to collapse
Hi Stussy,
You can start from here: http://forum.xda-developers.com/showthread.php?t=505377.
Choose which method you want to follow, HSPL or USPL. Read the instructions very careful, otherwise you may brick your phone.
Good luck.
philrom said:
Hi Stussy,
You can start from here: http://forum.xda-developers.com/showthread.php?t=505377.
Choose which method you want to follow, HSPL or USPL. Read the instructions very careful, otherwise you may brick your phone.
Good luck.
Click to expand...
Click to collapse
Thanks bro, but i'm still confuse
Need to change the dutty's rom name to BLACIMG.nbh ?
Is it flash the SPL 1st ? i'm only have 1 file of rom ..... how to flash the rom ...
hardspl got many version ... do you know which one suitable for this rom ?
Because yesterday i tried flash the spl ..... my HD become 3 colour .. oh my god
Lucky i found the version 1.14, after that ok already.
stussy said:
Thanks bro, but i'm still confuse
Need to change the dutty's rom name to BLACIMG.nbh ?
Is it flash the SPL 1st ? i'm only have 1 file of rom ..... how to flash the rom ...
hardspl got many version ... do you know which one suitable for this rom ?
Because yesterday i tried flash the spl ..... my HD become 3 colour .. oh my god
Lucky i found the version 1.14, after that ok already.
Click to expand...
Click to collapse
First, you have to check the SPL version you have. Turn off your HD, and press both down vol + power button to check your SPL version.
Then after that you can decide which way you want to use.
HSPL means flash the SPL once and you can flash ROM at anytime without worry about SPL.
USPL means you have to flash your SPL each time you want to flash a ROM to your HD.
I think your thread will be closed by mod, as this issue can be solved using the thread I gave you above. If you have any issue, you can post in that thread or send me pm.
Good luck, bro.
philrom said:
First, you have to check the SPL version you have. Turn off your HD, and press both down vol + power button to check your SPL version.
Then after that you can decide which way you want to use.
HSPL means flash the SPL once and you can flash ROM at anytime without worry about SPL.
USPL means you have to flash your SPL each time you want to flash a ROM to your HD.
I think your thread will be closed by mod, as this issue can be solved using the thread I gave you above. If you have any issue, you can post in that thread or send me pm.
Good luck, bro.
Click to expand...
Click to collapse
Damn .... become 3 colour again ... now the problem is can't find the SPL 114 to restare, yesterday forgot save it ...
stussy said:
Damn .... become 3 colour again ... now the problem is can't find the SPL 114 to restare, yesterday forgot save it ...
Click to expand...
Click to collapse
??
What's the situation now? What SPL version do you have now?
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
i check now
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
Now my SPL is SPL-1.56 olinex
But the screen colour become 3 colour only ... just look alike our computer safe mode
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
i want to flash this rom "Duttys HD HG R3 5.2.21893.nbh" but don't know how to do ...
Can you help me ?
Just do the guide from Digital Outcast Step-by-Step and you can't go wrong.
If you got a problem with a certain step, then explain it detailed.
We can't help if we don't know the exact problem.
stussy said:
i want to flash this rom "Duttys HD HG R3 5.2.21893.nbh" but don't know how to do ...
Can you help me ?
Click to expand...
Click to collapse
What is your current SPL? What kind of situation are you facing now?
Make it detailed so we can help you.
philrom said:
What is your current SPL? What kind of situation are you facing now?
Make it detailed so we can help you.
Click to expand...
Click to collapse
SPL-1.56 OliNex
radio : 1.09.25.14
Now my rom still original, the colour become ugly, look alike computer entry safe mode colour.
How to change the rom ? Y the colour become like that ?
Thanks a lot
stussy said:
SPL-1.56 OliNex
radio : 1.09.25.14
Now my rom still original, the colour become ugly, look alike computer entry safe mode colour.
How to change the rom ? Y the colour become like that ?
Thanks a lot
Click to expand...
Click to collapse
I see. Don't worry for the 3 colours. It's because your ROM is not supported by the current SPL you have now. From what I see, you are using HSPL.
It's easy to upgrade ROM using HSPL. The safest way is through the SD card.
You can try this:
1. Make sure your SD card format is FAT32, and make sure you have minimum 30% power left in your battery.
2. Rename the *.nbh file to be BLACIMG.nbh, and copy it to your sd card root location. Remember to copy it to your sd card root.
3. Shut down your pda, and go to your bootloader and follow the instruction there. Remember to hardreset after flashing. Don't plug the usb cable in while flashing.
Good luck.
philrom said:
I see. Don't worry for the 3 colours. It's because your ROM is not supported by the current SPL you have now. From what I see, you are using HSPL.
It's easy to upgrade ROM using HSPL. The safest way is through the SD card.
You can try this:
1. Make sure your SD card format is FAT32, and make sure you have minimum 30% power left in your battery.
2. Rename the *.nbh file to be BLACIMG.nbh, and copy it to your sd card root location. Remember to copy it to your sd card root.
3. Shut down your pda, and go to your bootloader and follow the instruction there. Remember to hardreset after flashing. Don't plug the usb cable in while flashing.
Good luck.
Click to expand...
Click to collapse
I will try tonite bro, anything will let you know
Thanks a lot
Hi
I've try different build of Android the last week and I always get some error when I do some messaging. Half of the message I receive are in chinese instead of English or French.
I have try
Scoot_CyanogenMod_7_alpha_RLS1_All_Language
myn-WarmDonut-04-24-2010-240x320-110
Incubus26Jc's Super FroYo RLS16 All Languages
I have done some reading in the forum but didn't find the answer about this.
Please help.
Thanks
Le_MaiTre
change radio firmware.
What do you call radio firmware ??
got othe windows section and search radio...
What is the latest version I should have ??? Some threat are old and I can't figure out what is the latest version ...
Thanks
I've done a lot of research but didn't find the right answer for me. I have install the rom with the stepby step instruction in this page ...
http://forum.xda-developers.com/showthread.php?t=636024
I have also download the file from here that I have rename it and put it in the folder with the RUU Update Utility. I have try the file lastest-vogue.nbh
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Everything work perfectly except the text message. I have also notice that in the setting when I go to about phone. The baseband version is unknown. I think that it's the problem but I don't know what to do to solve the problem.
Can someone help me ???
Thanks
the files in http://it029000.massey.ac.nz/vogue/files/?C=M;O=D are outdated
Ok do you know where I can find the file that are the most up to date ???
Le_Maitre said:
Ok do you know where I can find the file that are the most up to date ???
Click to expand...
Click to collapse
You could try here: http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) or here: http://sourceforge.net/projects/androidhtc/files/. Hope this helps.
theonew said:
You could try here: http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) or here: http://sourceforge.net/projects/androidhtc/files/. Hope this helps.
Click to expand...
Click to collapse
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Le_Maitre said:
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Click to expand...
Click to collapse
Here's how to change the radio
http://forum.xda-developers.com/showpost.php?p=5057656&postcount=6
here's the whole thread
http://forum.xda-developers.com/showthread.php?p=5057656#post5057656
And you need to find the latest radio for your phone possibly one that worked with windows mobile 6.51. Before you ask which one ..I have to say that I won't be able to help you as I don't own a vogue. I guess you could make a new thread and ask users which radios work best for them on vogue.
Le_Maitre said:
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Click to expand...
Click to collapse
The link has been fixed and go here for instructions: http://techf1.blogspot.com/2010/04/coming-soon-installing-android-21-on.html. I would advise you to use the gingerbread image.
theonew said:
The link has been fixed and go here for instructions: http://techf1.blogspot.com/2010/04/coming-soon-installing-android-21-on.html. I would advise you to use the gingerbread image.
Click to expand...
Click to collapse
I have forgot to say that my installation is on NAND so I can't use haret.
-Arturo- said:
Here's how to change the radio
http://forum.xda-developers.com/showpost.php?p=5057656&postcount=6
here's the whole thread
http://forum.xda-developers.com/showthread.php?p=5057656#post5057656
And you need to find the latest radio for your phone possibly one that worked with windows mobile 6.51. Before you ask which one ..I have to say that I won't be able to help you as I don't own a vogue. I guess you could make a new thread and ask users which radios work best for them on vogue.
Click to expand...
Click to collapse
I have download the files for the radio 3.42.50 on the tread that you gave. I rename the .nbh in RUU_signed.nbh and put it on the Rom Update utility and start the update.
It gave me the right radio and I click on update. I load to 8 % and after gave me an error
Error 328 Invalid Command
I have to exit the update process and the phone reboot to the old Scoot CyanogenMod that is already install with the old radio. I think I miss something but can't find it.
Can someone help me ??
Le_Maitre said:
I have forgot to say that my installation is on NAND so I can't use haret.Can someone help me ??
Click to expand...
Click to collapse
Go here for the step by step instruction guide for NAND installation and links to some files: http://forum.xda-developers.com/showthread.php?t=636024. I hope this helps.
Le_Maitre said:
I've done a lot of research but didn't find the right answer for me. I have install the rom with the stepby step instruction in this page ...
http://forum.xda-developers.com/showthread.php?t=636024
I have also download the file from here that I have rename it and put it in the folder with the RUU Update Utility. I have try the file lastest-vogue.nbh
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Everything work perfectly except the text message. I have also notice that in the setting when I go to about phone. The baseband version is unknown. I think that it's the problem but I don't know what to do to solve the problem.
Can someone help me ???
Thanks
Click to expand...
Click to collapse
theonew said:
Go here for the step by step instruction guide for NAND installation and links to some files: http://forum.xda-developers.com/showthread.php?t=636024. I hope this helps.
Click to expand...
Click to collapse
Like I already said. I've follow the step by step on your post but someone tell me that my messaging error are from the outdated radio on the step by step instruction. He found link from an other forum that give me the latest radio but when I try to re-install it I get an error and I do not know what to do .... I'm lost .....
Le_Maitre said:
Like I already said. I've follow the step by step on your post but someone tell me that my messaging error are from the outdated radio on the step by step instruction. He found link from an other forum that give me the latest radio but when I try to re-install it I get an error and I do not know what to do .... I'm lost .....
Click to expand...
Click to collapse
The only other thing I can think of is to have the latest radio from Windows Mobile. When you were using windows mobile, did you ever flash a custom rom? If you did then that may have fixed your problem if you were using the latest radio version. If you weren't, then I guess if you want to fix your problem, you're gonna have to flash a windows mobile 6.5.x rom with the latest radio and then flash android.
theonew said:
The only other thing I can think of is to have the latest radio from Windows Mobile. When you were using windows mobile, did you ever flash a custom rom? If you did then that may have fixed your problem if you wre using the latest radio version. If you weren't, then I guess if you want to fix your problem, you're gonna have to flash a windows mobile 6.5.x rom with the latest radio and then flash android.
Click to expand...
Click to collapse
Yes I have flash my phone with WinMo before. I was using NFSFAN Rom before switching to Android 2 months ago ...
Le_Maitre said:
Yes I have flash my phone with WinMo before. I was using NFSFAN Rom before switching to Android 2 months ago ...
Click to expand...
Click to collapse
When you were using it, what was your radio version? If it was the latest, then it should have been 3.42.50. I read that for "Bell" users like you, the radio 3.42.50 is recommended for this installation.
Le_Maitre said:
I have forgot to say that my installation is on NAND so I can't use haret.
I have download the files for the radio 3.42.50 on the tread that you gave. I rename the .nbh in RUU_signed.nbh and put it on the Rom Update utility and start the update.
It gave me the right radio and I click on update. I load to 8 % and after gave me an error
Error 328 Invalid Command
I have to exit the update process and the phone reboot to the old Scoot CyanogenMod that is already install with the old radio. I think I miss something but can't find it.
Can someone help me ??
Click to expand...
Click to collapse
did you read the whole post that i had provided before??? there isasolution to yourproblem there.
Way 3 (I know I said two ways...): There are a few
stock roms that come with new radios. One of
them can be downloaded directly from HTC and it
is for the Sprint Touch. This one comes with Radio
3.42.30
The other one is for Bell Mobility and this one
comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options
seem much easier?? I have run into the problem
where my device would not let me flash other
radios than the one that I had. SD card method
did not work and the RUU started out fine but
quits at 8% rebooting my phone and displaying
Error 328 in the RUU on the PC. Anyway, here are
the links...
-Arturo- said:
did you read the whole post that i had provided before??? there isasolution to yourproblem there.
Way 3 (I know I said two ways...): There are a few
stock roms that come with new radios. One of
them can be downloaded directly from HTC and it
is for the Sprint Touch. This one comes with Radio
3.42.30
The other one is for Bell Mobility and this one
comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options
seem much easier?? I have run into the problem
where my device would not let me flash other
radios than the one that I had. SD card method
did not work and the RUU started out fine but
quits at 8% rebooting my phone and displaying
Error 328 in the RUU on the PC. Anyway, here are
the links...
Click to expand...
Click to collapse
I've read the whole post but I don't understand the 3rd way. If I click on the Bell rom with radio 3.42.50 it bring me to the HTC site and there nothing to download.
I've try to download the All Above Radios zipped. It gave me 3 files in a zip. I rename the file 3.42.50 in RUU_signed.nbh and put it in the folder of the ROMUtilityUpdate. Maybe is there I do something wrong ...
Did I miss something ???
I have bricked my G1, it happend when i updated dangelSpL (dream_magic.hboot-1.33.2005-signed.zip) through recovery mode and then after reboot my G1 is stucked on G1-tmobile screen , I am not able to enter into recovery or fastboot mode, also don't see any warning on computer when its connected to usb wire. Is there any way to fix it or should i just forget it?. ,
I read somewhere then tried formatting sdcard and copied dreamg.nbh, then restarted phone by holding volum down+trackball+power button but it just brought the purple light and nothing happened.
samkhan79 said:
I have bricked my G1, it happend when i updated dangelSpL (dream_magic.hboot-1.33.2005-signed.zip) through recovery mode and then after reboot my G1 is stucked on G1-tmobile screen , I am not able to enter into recovery or fastboot mode, also don't see any warning on computer when its connected to usb wire. Is there any way to fix it or should i just forget it?. ,
I read somewhere then tried formatting sdcard and copied dreamg.nbh, then restarted phone by holding volum down+trackball+power button but it just brought the purple light and nothing happened.
Click to expand...
Click to collapse
Either you find someone with JTAG equipment, or your G1 is only useable as a paperweight now ...
Really speaking, I don't know why nowadays
1) someone is still using "DangerSPL", because it's proved to be useless for the T-Mobile G1 (use 1.33.2003 instead)
2) if someone still want's to use it, why he is flashing it by recovery mode
3) if nevertheless he wants to use it, he doesn't check twice the requirements before flashing
i was following guidliness from here.
http://wiki.cyanogenmod.com/wiki/HTC_Dream:_DangerSPL#Flashing_Radio
So even if someone has JTAG equipment , how they can fix it ???
samkhan79 said:
i was following guidliness from here.
http://wiki.cyanogenmod.com/wiki/HTC_Dream:_DangerSPL#Flashing_Radio
So even if someone has JTAG equipment , how they can fix it ???
Click to expand...
Click to collapse
Didn't use JTAG up tzo now, but a guide can be found on the Cyanogenmod Wiki.
Btw. in the guide you are referring to it's written in red letters: "before flashing check if you have a compatible radio installed" ...
AndDiSa said:
Didn't use JTAG up tzo now, but a guide can be found on the Cyanogenmod Wiki.
Btw. in the guide you are referring to it's written in red letters: "before flashing check if you have a compatible radio installed" ...
Click to expand...
Click to collapse
I am sure i was on radio 2.22.23.02
samkhan79 said:
I am sure i was on radio 2.22.23.02
Click to expand...
Click to collapse
Are you sure all ways to get into fastboot don't work?
Because I know that with some SPLs the buttons switch around
Try the following: Camera+Power, Call+Power, Back+Power
Because I know that when I bricked my G1 with improper SPL (semi on purpose since i knew i had an extra mobo), the G1 screen didn't show.
AndDiSa, I think you mean 1.33.0013d
And I use DangerSPL every once in a while to use ROMs older than eclair
And how else would you do it?
You don't exactly start with an engineering SPL on the dream, so you can't flash a SPL through fastboot, leaving the only way to be recovery.
frankdrey said:
Are you sure all ways to get into fastboot don't work?
Because I know that with some SPLs the buttons switch around
Try the following: Camera+Power, Call+Power, Back+Power
Because I know that when I bricked my G1 with improper SPL (semi on purpose since i knew i had an extra mobo), the G1 screen didn't show.
AndDiSa, I think you mean 1.33.0013d
And I use DangerSPL every once in a while to use ROMs older than eclair
And how else would you do it?
You don't exactly start with an engineering SPL on the dream, so you can't flash a SPL through fastboot, leaving the only way to be recovery.
Click to expand...
Click to collapse
no he means 1.33.2003
http://rapidshare.com/files/388568285/g1boot.zip
a different engineering spl that is safer than the danger spl, but yes why not use 1.33.0013d, most older roms just need a different kernel to be flashed over them to work so use it! but you do need an engineering spl to get there...
demkantor said:
no he means 1.33.2003
http://rapidshare.com/files/388568285/g1boot.zip
a different engineering spl that is safer than the danger spl, but yes why not use 1.33.0013d, most older roms just need a different kernel to be flashed over them to work so use it! but you do need an engineering spl to get there...
Click to expand...
Click to collapse
Oh ok I see
demkantor said:
no he means 1.33.2003
http://rapidshare.com/files/388568285/g1boot.zip
a different engineering spl that is safer than the danger spl, but yes why not use 1.33.0013d, most older roms just need a different kernel to be flashed over them to work so use it! but you do need an engineering spl to get there...
Click to expand...
Click to collapse
1.33.0013d has only limited fastboot capabilities, so should not be the first choice, but 1.33.2003 is an full engineering SPL compatible with 1.x and 2.x radio, from there you can flash easily new radios and/or SPLs.
Sent from my Gingerbread on Dream using XDA App
Yes but to start with (on stock) the only way to flash an engineering spl is through recovery since stock has a non engineering spl which doesn't support fastboot flash
Sent from my Dream/Sapphire using Tapatalk
frankdrey said:
Are you sure all ways to get into fastboot don't work?
Because I know that with some SPLs the buttons switch around
Try the following: Camera+Power, Call+Power, Back+Power
Because I know that when I bricked my G1 with improper SPL (semi on purpose since i knew i had an extra mobo), the G1 screen didn't show.
AndDiSa, I think you mean 1.33.0013d
And I use DangerSPL every once in a while to use ROMs older than eclair
And how else would you do it?
You don't exactly start with an engineering SPL on the dream, so you can't flash a SPL through fastboot, leaving the only way to be recovery.
Click to expand...
Click to collapse
Yes I have already tried all the options, and i have given up hope coz even the computer doesn't show any activity when i connect it to computer through usb and switch it on. So You think i shouldn't have used dream_magic.hboot-1.33.2005-signed.zip?
Egh, its not exactly your fault
If you had the correct radio and it bricked....that's just a freak accident....
Oh well, I guess your g1 is done
You might be able to get someone to unbrick it for you with JTAG