Related
Hi everyone,
by flashing neldars BLN 3.0 (Gingerbread) via his SGS kernel flasher there has gone something wrong. somehow my phone couldnt boot anymore and my CWM recovery turned back into the stock 3e. I would try to flash the stock-rom via odin but my battery has only 10%. Then i tryed to charge it at first before flashing something but when i put the battery back into the phone and plug in the charger, theres an icon with a phone and a PC connected to each other and in the center of them is an exclamation mark. So I decided to get the battery off the phone.
What can I do?
Last working ROM: Simply Honey 3.3 (Gingerbread) @ CF-Root Kernel
Need jig look on ebay i had same icons on screen and jig sorted it out or could make your own its well posted on here
Sent from my GT-I9000 using XDA App
the deadlink icon usually shows when you are using a usb cable as charge, how about try using the wall charger for charge. if the battery is already good. when you put in the battery, the deadlink won't show just yet, but if it does just press the download mode buttons even if it shows just holding it for like 15 seconds (enough time for the system to boot download mode) and flash thru odin using a CF kernel.
What he ^ said.
Sent from my GT-I9000 using XDA Premium App
basically i messed up the bootloaders now it does this (bear with me)
http://www.youtube.com/watch?v=QkFsZK79XYQ
it only does this when plugged into the wall and it will not do anything if plugged into usb port on the pc, my guess now is the battery is so flat that it wont do a thing any more! i almost got it to run via odin on the pc but the battery drained so bad that it wont respond, i have left it plugged in for at least 6 hours with then just the same response just on and off on and off.
can i take the battery out and charge it via a separate charger to get some life into it to then flash the stock rom via odin?
any ideas would be great! i don't mind taking it apart but don't want to if i'm going to fry the battery i have all sorts of wall chargers, can i join the + and - from the wall charger to the correct wires on the battery for it to charge? i have a multimeter to test the batteries voltage. any suggestions?
[UPDATE 1 ] flashed overcome stock rom then pc wont connect to odin even in recovery mode, :recovery is stock: :rom is stock: from the overcome website, cant flash any rom via odin as it wotn connect, error message usb device not recognised' how to fix this issue? maybe update.zip via sdcard within stock recovery? which rom and for gt-p1000 united kingdom. i tried to reinstall samsung kies for the correct driver but still the same issue, cannot connect after flashing. i have been following this guide http://p1000.teamovercome.net/?page_id=64 any help with connection would be great or flashing via recovery, almost unbricked but not quite.
my connection problem was due to a faulty usb cable, all is fixed now and i have overcome kratos.installed and running sweet
Hello, I don't think that you have a dead battery. I think your rom has a defect cause your Tab would like to boot. Is it possible to go to recovery or to the download mode? Try to flash something. Does your Tab start this screen flash automaticly by plug on a PC od starts this only if you try to turn it on?
PS: It is possible to remove the battery but it is a little difficult. My suggestion: don't touch the Battery
will not go to download mode or recovery. no response when pushing power power button, all i get is the flashing screen with pc and mobile phone connection.
i left tab connected to the pc for one hour, the tab came on with the pc-phone connection image, i flashed overcome rom via odin with repartition which completed but when it went to reboot it has stayed turned off and wont come on at all even when pressing the power button, no download mode and no recovery, i will wait again for it to come on and try the stock rom, not sure if i've got the correct bootloaders or not.
any ideas?
Have you tried leaving it on the ac outlet? or car charger?
ok slight update. . .
i left it plugged into the pc after it passed the odin flash it then BOOTED i was like WWWAAAAAAHHHHOOOOO bouncing on my chair and feeling very happy indeed the battery is totally dead but is now charging in the wall switched off to get some life back into the battery im so pleased
next steps is to get the overcome rom to flash!
lexriley said:
Have you tried leaving it on the ac outlet? or car charger?
Click to expand...
Click to collapse
i tried for 6 hours to plug it directly into the wall but nothing worked.
Exact same thing happened to me on the Sprint Tab. Called Samsung and sent the unit in. They sent me a brand new unit the next week.
when plugged into my pc now i get an error message, ' usb device has not been recognised' im thinking its the drivers but not sure where to get them, i have searched.
i have updated the 1st post with more information on this issue.
Your tab was showing a secondary bootloader so if you mess up your primary bootloader with the bootloader patch it'll still be recoverable and as for getting overcome I would recommend upgrading to gingerbread which doesn't have protected bootloaders and flash kratos or Jupiter which are faster than the froyo based overcome rims ;-)
Sent from my GT-P1000 using XDA Premium App
Roms*
Sent from my GT-P1000 using XDA Premium App
the only issue im having now is the fact that the pc wont recognise the android phone when in download mode.
the only message i get on the screen is 'usb device not recognised' i am then unable to flash a different rom or a stock rom via odin being gingerbread or froyo. thats why im asking if there is an update.zip file that i can flash from the recovery to make the usb mode work as it wont even work with debugging mode on or off and wont show via samsung kies or odin when the tab is booted.
my connection problem was due to a faulty usb cable, all is fixed now and i have overcome kratos.installed and running sweet
good troubleshooting!!! I
Sent from my GT-P1000 using XDA Premium App
I was updating my galaxy note to ICS with ODIN3. And on the final, just stopped on HIDDEN.img and keep this way till my battery runs out. Now the phone only power on with download mode, and I cannot flash any rom with ODIN, I tried to flash the ICS from the chinese link, from the sammobile.com, and I also tried others stock roms. Or the same thing happens or just fail or finish without flashing the rom =/
if you can get into download mode you can flash a stock rom using odin
try flashing a stock kernal...or unsecure one..
Sent from my GT-I9220 using XDA App
by the way dnt panic ur fone is not bricked..try remove battery n flash the cf kernel for the ics leak i9220..
Sent from my GT-I9220 using XDA App
Moved To Q&A
Please post all questions in the Q&A section
saif123a said:
by the way dnt panic ur fone is not bricked..try remove battery n flash the cf kernel for the ics leak i9220..
Sent from my GT-I9220 using XDA App
Click to expand...
Click to collapse
In proper terms:
DONT PANIC. You're not bricked, just borked.
Pull the battery and leave it out for 5 minutes.
Put the battery in and plug the phone into a WALL CHARGER.
Allow it to charge for 2 hours MINIMUM. VERY VERY IMPORTANT. Especially if you let the battery die previously.
Put battery in and go into download mode.
Connect Odin to the phone. One you have the yellow box letting you know it's connected flash a STOCK ROM from here.
Profit.
Well, I'm not at home now. But I already tried to flash a stock rom, and nothing happens, it finishes with 0 instals and 0 errors or just stop on HIDDEN.img. And I use a universal battery charger on my battery
conanjf said:
Well, I'm not at home now. But I already tried to flash a stock rom, and nothing happens, it finishes with 0 instals and 0 errors or just stop on HIDDEN.img. And I use a universal battery charger on my battery
Click to expand...
Click to collapse
Then you are doing something wrong...
Swyped from a white note.
If it gets stuck at hidden then most probably you are using the wrong pit file as there are 2.. 1 for the 32gb and 1 for the 16gb..
Sent from my GT-N7000 using xda premium
nuclearmonkeyuk said:
If it gets stuck at hidden then most probably you are using the wrong pit file as there are 2.. 1 for the 32gb and 1 for the 16gb..
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Well, I didn't think about that !!!
On the ICS I downloaded, there was the pit for 32gb, but mine is 16. But I dont remember if I flash the pit. I'll try to flash the 16gb pit again !!!
I'm at almost same position. I have the same screen problem, phone not turning on after Samsung logo.
I'm trying to go into download mode, it says low battery. So, I try to charge it, but it's not charging at all. Tried a battery charger, didn't work as well.
emre1903 said:
I'm at almost same position. I have the same screen problem, phone not turning on after Samsung logo.
I'm trying to go into download mode, it says low battery. So, I try to charge it, but it's not charging at all. Tried a battery charger, didn't work as well.
Click to expand...
Click to collapse
Well, I used a universal battery charge to charge my battery.
I flash the pit 16gb alone, and then I tried do flash the rom and it just get stuck on setupconnection!!!
Well I fixed it.
I removed the sd card and the chip. Downloaded odin3 v.1.83 on 4shared (really easy to find it) because I read this on sammobile.com:
For those user that stuck at hidden.img,kindly proceed with Odin 1.83..100% guaranteed because i’ve try it and it works perfectly..thanks sammobile..
greghart_mirrus
and it work !!! *_*
I installed the ICS, but is full of bugs... So I installed the stock rom again (2.3.6) and its full of errors too =/
did you do a full wipe and cache clearing ?
btyork said:
In proper terms:
DONT PANIC. You're not bricked, just borked.
Pull the battery and leave it out for 5 minutes.
Put the battery in and plug the phone into a WALL CHARGER.
Allow it to charge for 2 hours MINIMUM. VERY VERY IMPORTANT. Especially if you let the battery die previously.
Put battery in and go into download mode.
Connect Odin to the phone. One you have the yellow box letting you know it's connected flash a STOCK ROM from here.
Profit.
Click to expand...
Click to collapse
Hi,
I also encountered this same issue (stuck at hidden.img).
and i also tried to restore the stock rom via odin but it's still stuck at hidden.img
i can only flash the custom rom via CWM but internal SD card is not readable. Do you have any idea to fix this issue, please? thanks for yr help.
Rattna/Zudy
Did u try to flash the rom with odin3 v1.83??? I did this and didnt stuck on the hidden.img. I flashed this rom http://www.mirorii.com/fichier/3/501208/I9220LP1-N7000-ICS-REPACK-tar.html
I am still stuck at same point. Trying to charge the battery with battery charger, and put it back, the phone says low battery can't get in download mode. I plug it into to wall charger it doesn't seem it's charging at all. I don't know what I'm supposed to do ? Should I buy new battery
Hi! I noticed you guys were having problems with ICS. CLICK HERE to check out my guide to get ICS working easily. You can flash the chainfire repack with the attached 16gb pit file (unzip it first) to get ICS. But I suggest you start with step 1 from the guide to get a stable baseband for your ICS.
PS. I have also attached ODIN v1.85.
emre1903 said:
I am still stuck at same point. Trying to charge the battery with battery charger, and put it back, the phone says low battery can't get in download mode. I plug it into to wall charger it doesn't seem it's charging at all. I don't know what I'm supposed to do ? Should I buy new battery
Click to expand...
Click to collapse
U'd use someone like this one >> http://www.1001sites.co.uk/BCH_UNI.JPG
to charger the battery.
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
sourabh12 said:
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
Click to expand...
Click to collapse
i guess your gonna download a firmware on 2.2.1 and flash it..........but i recommend 2.3.3 firmware..try it on mine the ......!....... but still odin detects it......2.2.1 is old try AOKP for are tab....best rom
First, which tab is yours.
Edit: from your pm you indicate P1000.
OK, I sounds luke a broken record now but here goes.
Have you had a look at overcome method.
You need to flash GB-stock-safe-v5.
Sometimes even when screen is blank, it can still be a download mode.
So, be sure that it is charged (using original wall charger).
Then ready Odin and the files in proper places and pre connect the tab to PC.
Then boot to download mode and quickly flash using Odin.
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
After it is revived, you may want to continue.
If so.
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app
Read my post at the bottom of this thread:
http://forum.xda-developers.com/showthread.php?t=1826324
I had the same issue but I've now sorted it.
tab working again!!
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
What about a Tab P1000N? What can be done with that one?
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
priyana said:
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
Click to expand...
Click to collapse
Thanks, it did work for me.
You saved my world
sourabh12 said:
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
Click to expand...
Click to collapse
I looked every where for 24 hours and then I ran across your post simply......now I and anyone else that has this problem knows to let the tablet charge on the computer our laptop for 20 mind and then the bricked download screen will appear and your good to go you post was very helpful maybe the only real method out there thanks a million:angel::good:
Hello,
I was attempting to flash GB_Stock_Safe_v5 to my Galaxy Tab P1000 via Odin and it failed half way through.
Now the Tab does not power on or show a charging screen.
Is there anyway to go back to Download mode?
Hi
I'm not a GTab user but in SGS phones there's the JIG method to acces to download mode if the phone is bricked and I don't really know if it is on GTab too so google that and let me know
P.S you'll need an extra usb cable to do this don't loose your extra cable!
Zenpher said:
Hello,
I was attempting to flash GB_Stock_Safe_v5 to my Galaxy Tab P1000 via Odin and it failed half way through.
Now the Tab does not power on or show a charging screen.
Is there anyway to go back to Download mode?
Click to expand...
Click to collapse
Many modes are download mode without you realising it.
Try just make sure you are fully charged, and prepare the Odin and connect cable.
Then power up in download mode.
If comm is detected and added in Odin, that means it sees your tab.
Flash away.
Another user recommend differently.
He said once he restarted Odin, comm is detected and added.
Zenpher said:
Hello,
I was attempting to flash GB_Stock_Safe_v5 to my Galaxy Tab P1000 via Odin and it failed half way through.
Now the Tab does not power on or show a charging screen.
Is there anyway to go back to Download mode?
Click to expand...
Click to collapse
did you put the p1000.pit file??
I am kind of the same problem....
Sent from my Transformer TF101 using xda app-developers app
priyana said:
Many modes are download mode without you realising it.
Try just make sure you are fully charged, and prepare the Odin and connect cable.
Then power up in download mode.
If comm is detected and added in Odin, that means it sees your tab.
Flash away.
Another user recommend differently.
He said once he restarted Odin, comm is detected and added.
Click to expand...
Click to collapse
I doesn't power up at all. I've tried charging it for 2 days straight.
IKalam82 said:
did you put the p1000.pit file??
Click to expand...
Click to collapse
Yepp. Not sure if that's why it failed though.